The import solution still not found.

Hi everyone.
I am using database 7.3.2.
I exported the whole database and I want to import the whole database from the exported file .
please could anyone provide me with the steps to import the whole database and what should I do in details.
I want to import in the same database version to get rid of chain.
what should I do exactly before I start importing my database, should I drop all the users or what exactly please.
my database, used so many objects and the size of my database is 36GB
If I imported a full database into exisitng database using ignore=y, it may occur duplicate rows on my tables, so I don't want that to be happened.
If I recreate database as same name , users and tablespace that will take me SO much time because my database has many users and many tablespaces, I think it is not the right solution.
please give me a helping hand.
bye.

Hi,
I will describe you what I did exactly.
I made four batches, the first one is to drop all the users I have accept sys user ,
the second batch is to create all the users whitch I dropped,
and the third batch file is to grant dba roll to all the users I created,
and the fourth one is to grant unlimited tablespace to all the users I created.
imp sys/sys file=/exp_file.dmp ignore=y grants=yes log=dbimp.log full=y
this was the command I used to import the whole database.
when this command proceeded the first thing appeared is this error:-
IMP-00017: following statement failed with ORACLE error 2237:
"CREATE TABLESPACE . . . . . . . . . . . . . .
IMP-00003: ORACLE error 2237 encountered
ORA-02237: invalid file size
IMP-00017: following statement failed with ORACLE error 2237:
"CREATE TABLESPACE . . . . . . . . . . . . . . . . .
IMP-00003: ORACLE error 2237 encountered
ORA-02237: invalid file size
importing....... figel into figel
importing table ...figelt_mst 253 rows
despite these errors the import is going and many users imported successfully,but there are some errors appeared once again.
imp-00003:oracle error encountered.
ora-01562:failed to extend rollbacksegments number 5.
ora-01650: unable to extend rollback segments RDS005 by 256 in tablespace RBS.
ora-01730:invalid number of column names specified.
ora-01789:query block has incorrect number of result columns.
after these errors the import is proceeded with other users well, but there are sevens views could not be created during the import.
imp-00020:long column too large for column buffer size (30506)
imp-00041:warning object creeated with compilation warnings
ora-04063: view fischv_acc has errors
and in the end the import completed successfully with warnings.
my company asked me to do import and you see the difficulties I am in.
please could you help me to fix these errors.
bye.

Similar Messages

  • The import Alert could not be found sdk 4.5.1 ????

    For some reason I switched my sdk in compiler options to 4.5.1 and most of my classes are not recognised in the import statements
    import mx.controls.Alert;
    import mx.controls.TextInput;
    import mx.events.FlexEvent;
    import mx.formatters.DateFormatter;
    The import Alert could not be found.
    The import DateFormatter could not be found.
    etc
    what is going on friends?

    Hi,
    Can you open your project properties and check in Flex build path if under current SDK node "mx.swc" is listed in SDK libraries (it should if project is configured for 'MX + Spark' component set)?
    regards,
    Peter

  • I have files that say they are missing or offline. I have checked all my folders off of lightroom and they can not be found. I have used the ? mark settings to find and still not found. I can see the images on lightroom so they have to be in my system som

    I have files that say they are missing or offline. I have checked all my folders off of lightroom and they can not be found. I have used the ? mark settings to find and still not found. I can see the images on lightroom so they have to be in my system some how. How can I retrieve these images? Is there a re boot for lightroom? Need help ASAP!

    You have probably moved the files outside of Lightroom. The images you see in LR are previews that were made before you moved the files.
    Do a search for the files/folders using your computers operating system. (Explorer/Finder)
    Once you have found them, you can point LR to the right location.

  • Cannot join tables used in the workbook. Join "" not found in the EUL. Atte

    Trying to migrate workbooks from one instance to other using discoverer 10.1.2.48.18 i am getting the following error
    Unable to open the worksheet requested.
    - OracleBI Discoverer was unable to find the worksheet that was requested.
    - BIB-10310 An unknown exception occurred.
    - Cannot join tables used in the workbook. Join "" not found in the EUL. Attempt to open workbook failed.
    but its fine one instance , and in prod i am getting above weird error.
    does anybody know how to rectify this.

    Note:267476.1 - for those who can't get into metalink but still need to know the answer
    Subject: Discoverer Workbook Fails With 'Cannot join tables.Item dependency "" not found in EUL' After EUL Migration, Importing Or Cloning
    Doc ID:      Note:267476.1      Type:      PROBLEM
    Last Revision Date:      28-APR-2005      Status:      PUBLISHED
    The information in this document applies to:
    Oracle Discoverer - Version: 4.1 to 10.1
    This problem can occur on any platform.
    Symptoms
    Opening a workbook migrated from one instance to another results in the following errors:
    * Unable to load EUL item ...
    * Cannot join tables. Item dependency "" not found in EUL.
    * Illegal operation... DIS4USR OR DIS5USR caused an invalid page fault in module....
    If using the workbook dump utility, you may notice:
    * Found in EUL by id *** Name has changed to .. where the new name is really the wrong column
    It seems that items are matched by internal item identifiers (IDs) and not by developer keys and names.
    Changes
    Migrating from one environment to another. For example, you may have performed a database export / import of the EUL schema from DEV to TEST
    Cause
    The timestamp is the same for both EULs, what can be confirmed by the following SQL statement:
    * Discoverer 4:
    SQL> select ver_eul_timestamp from eul4_versions;
    * Discoverer 9.0.2 , 9.0.4, 10.1 the script is:
    SQL> select ver_eul_timestamp from eul5_versions;
    If the result of the sql output is the same in both EULs, it means that timestamp of both EULs are the same. Discoverer assumes that the EUL are exactly the same (e.g. this can happedn when one of them is created with export/import of the other EUL schema using database export/import utilities) and this is the reason it tries to match items by identifiers and not by developer keys or names.
    Solution
    Change the column ver_eul_timestamp in the eul4_versions (4.1) or eul5_versions(9.0.2 - 10.1)tables to be something different in the destination EUL. The format of this column is like year:month:day:seconds:milliseconds
    Example:
    * Discoverer 4.1:
    sql> update EUL4_VERSIONS set VER_EUL_TIMESTAMP =TO_CHAR(SYSDATE, 'YYYYMMDDHH24MISS');
    sql> commit;
    * Discoverer 9.0.2:
    SQL> update EUL5_VERSIONS set VER_EUL_TIMESTAMP = TO_CHAR(SYSDATE, 'YYYYMMDDHH24MISS');
    sql> commit;
    * Discoverer 9.0.4 -10.1:
    Run the script: EUL5_id.sql as the eulowner ID
    o For 9.0.4 -- This is found on a PC with the Discoverer Administrator installed in drive:\Oracle Home\discoverer\sql
    o For 10.1.0 -- This is found on a PC with the Discoverer Administrator installed in drive:\Oracle Home\discoverer\util
    This is documented in:
    Oracle® Business Intelligence Discoverer
    Administration Guide
    10g Release 2 (10.1.2.0.0)
    Part No. B13916-02
    http://download.oracle.com/docs/pdf/B13916_02.pdf
    Chapter 4 "About copying EULs and EUL objects by exporting and importing"
    Oracle® Discoverer Administrator
    Administration Guide
    10g (9.0.4)
    Part No. B10270-01
    http://download.oracle.com/docs/pdf/B10270_01.pdf
    Chapter 3 "About copying EULs and EUL objects by exporting and importing"
    References
    Bug 3202329 - Migrating Workbooks Between Instances Shows Incorrect Column

  • Recorded Videos after Sync: The requested URL was not found on this server.

    A few days ago, i recorded a couple of videos. They were saved properly and i could watch them after it in the Camera Roll of my iPhone. Because my memory was almost full, i connected my iPhone to my MacBook and synchronized about 900 old pictures with iPhoto and selected to delete the pictures after the sync. I did not select the recently recorded videos.
    After the sync, i opened the Camera Roll on my iPhone and tried to watch the videos again. But now, they all have a grey icon and it says the duration is 0:00 minutes. When i click on a video, it shows me the following error message:
    The requested URL was not found on this server.
    When i connect my iPhone to iTunes, it says that there is about 350 MB of "Documents and Data" on my phone that I have no idea where it is coming from. Do you think it is possible that the videos are still saved on my phone but my phone doesn't recognize it as videos and can't assign it to the icons in the Camera Roll? Do you have any tips how I can access the videos in case they are still saved somewhere on my iPhone?
    Thank you very much in advance for your help and tips!

    I have the same problem too!! I was deleting some photos and videos in my phone when the next picture I swiped to was a blank picture with JPG in the middle~ after I closed camera roll and reopened it my photos and videos after that picture are all gone~ and I'm left with 3 videos I took about 30 mins before with 0:00 and when I tried to play them the message popped up saying "requested URL cannot be found on this server" T^T does anyone have a solution to this problem?

  • HELP. "The requested URL was not found on this server." (iPhone videos)?

    So i was editing a bunch of videos on iMovie on my phone and while exporting, i didn't have enough space. So I thought that I would delete the videos off my Camera Roll (the ones i'm putting into iMovie) thinking that i would still be able to export and have enough space.
    It was the wrong decision because it resulted in having all the videos deleted even on iMovie. So i backed up my files on iTunes 2 days ago (luckily) and when i restored my files, the videos are back.
    BUT the videos that were saved from snapchat (they were going into the video i was putting together) wouldn't play! It shows the error "The requested URL was not found on this server".
    I looked up everything possible to try and fix it but i just can't find it the correct solution. I accidentally backed it up tonight and so the old back up file is gone. I really want to save these videos. The videos still show up in my Camera Roll, they just wouldn't play because the error shows up.
    When i connect my phone to my laptop (PC windows vista... I know its old but it works fine for me) it would show the option "open device files" or something. so when i open it, it shows the DCIM folder. And so i open that it shows all my pictures and videos.
    Problem is my snapchat videos show up as 0 bytes and still wouldnt play. I've attacted the error message just so you guys know what i'm talking about.
    I'm really sad and upset about this, so can anyone help me??
    pleaseeee!

    This might be helpful:
    http://support.apple.com/kb/HT4539

  • The getBuiltInScopes method was not found

      I have an application that has worked for quite a while. I have made no changes to the code since the last time I used it. Basically, the code creates a zip file with input for an involved report. I used it in March of this year it worked fine. I've been assured by the gov't sysadmins and DBAs that nothing has changed, but I still get the attached error. Any ideas?    I have just heard from a friend who knows CF, that it could be a version issue.  I am currently running 8 and I believe he is running 10.   If this is an issue, is the solution somewhere on this site?   I do minimal CF and am at a loss.   The function that is throwing the error is when a button is clicked, a javascript routine is run which combines all the files requred for the zip file.   Yesterday, another application started throwing the error.  I haven't been through the code yet, but it is another button being clicked, and I'm sure, another javascript error.

    The SysAdmin sent me the application log:  Since it is a government site, I changed identifying things to XXXX  or xxxx.
    "Error","ajp-bio-8012-exec-2091","09/26/14","11:43:33","XXXXransfer3","The getBuiltInScopes method was not found.Either there are no methods with the specified method name and argument types or the getBuiltInScopes method is overloaded with argument types that ColdFusion cannot decipher reliably. ColdFusion found 0 methods that match the provided arguments. If this is a Java object and you verified that the method exists, use the javacast function to reduce ambiguity. The specific sequence of files included or processed is: \\haffs002\ProdData\Sites\xxx\IE\XXXX\secure\Authorization\FundingRequestForm_Action.cfm, line: 113 "
    Line 113 is: document.form1.actiontaken.value = "approve"
    The user clicks on a button to Approve or Disapprove a request.  This causes another screen to be displayed.  The error is happening before the 2nd screen is displayed.

  • Error when deploying BPM application: The specified process was not found

    Hi,
    I was trying to deploy a simple BPM application to a SOA Server, when I got the following error:
    [04:55:19 PM] Error deploying archive sca_PRUEBABPM_rev1.0.jar to partition "default" on server WLS_SOA2 [http://myserver:8001]
    [04:55:19 PM] HTTP error code returned [500]
    [04:55:19 PM] Error message from server:
    There was an error deploying the composite on WLS_SOA2: Operation failed - Member(Id=1, Timestamp=2013-07-15 19:30:56.492, Address=myadress:8088, MachineId=15229, Location=site:,machine:soadev1vhn1,process:29545, Role=WeblogicServer):Error occurred during deployment of component: PruebaManual to service engine: implementation.bpmn, for composite: PRUEBABPM: java.lang.RuntimeException: oracle.bpm.metadata.exception.MetadataException: BPM-70812: Process 'PruebaManual' not found.  Cause: The specified process was not found.  Action: Check that the name of the process is correct: oracle.bpm.metadata.exception.MetadataException: BPM-70812: Process 'PruebaManual' not found.  Cause: The specified process was not found.  Action: Check that the name of the process is correct; .  Please see the server diagnostic logs on WLS_SOA2 for details.
    [04:55:19 PM] Check server log for more details.
    [04:55:19 PM] Error deploying archive sca_PRUEBABPM_rev1.0.jar to partition "default" on server WLS_SOA2 [http://myserver:8001]
    The log file in the server console shows this:
    Error during deployment oracle.fabric.common.FabricException: Operation failed - Member(Id=1, Timestamp=2013-07-15 19:30:56.492, Address=192.168.168.231:8088, MachineId=15229, Location=site:,machine:soadev1vhn1,process:29545, Role=WeblogicServer):Error occurred during deployment of component: PruebaManual to service engine: implementation.bpmn, for composite: PRUEBABPM: java.lang.RuntimeException: oracle.bpm.metadata.exception.MetadataException: BPM-70812: Process 'PruebaManual' not found. Cause: The specified process was not found. Action: Check that the name of the process is correct: oracle.bpm.metadata.exception.MetadataException: BPM-70812: Process 'PruebaManual' not found. Cause: The specified process was not found. Action: Check that the name of the process is correct; . Please see the server diagnostic logs on WLS_SOA2 for details at oracle.integration.platform.blocks.deploy.CompositeDeploymentCoordinatorMessages.throwOperationFailedOnNode(CompositeDeploymentCoordinatorMessages.java:132) at oracle.integration.platform.blocks.deploy.CoherenceCompositeDeploymentCoordinatorImpl.submitRequestAndWaitForCompletion(CoherenceCompositeDeploymentCoordinatorImpl.java:351) at oracle.integration.platform.blocks.deploy.CoherenceCompositeDeploymentCoordinatorImpl.coordinateCompositeDeployment(CoherenceCompositeDeploymentCoordinatorImpl.java:214) at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deployNewComposite(BaseDeployProcessor.java:467) at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:268) at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:203) at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:147) at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:134) at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:100) at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPostInsideLoggingSession(CompositeDeployerServlet.java:221) at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:130) at javax.servlet.http.HttpServlet.service(HttpServlet.java:727) at javax.servlet.http.HttpServlet.service(HttpServlet.java:820) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119) at java.security.AccessController.doPrivileged(Native Method) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119) at java.security.AccessController.doPrivileged(Native Method) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:252) at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    Restart the server as I found in some pages and even a thread here (https://forums.oracle.com/thread/1557156) is not the better solution, the real issue still unknown. I need to find a solution without restarting the server machine.
    Thanks,
    AAPDL

    That error means you don't have rights to the Mailbox your trying to access. In Exchange by default the only user that has access to mailbox is the owner of the Mailbox, Exchange Administration rights does not grant you access to another users mailbox. You
    need to either specifically grant rights to each mailbox using Add-MailboxPermissions or use EWS impersonation where you can impersonate the owner of the Mailbox see
    http://msdn.microsoft.com/en-us/library/bb204095(EXCHG.140).aspx and
    http://msdn.microsoft.com/en-us/library/office/dd633680(v=exchg.80).aspx
    Cheers
    Glen

  • Error Code 0x80070035 - The network path was not found, Windows Server 2008 SP2

    I have bee receiving following "error code 0x80070035 - The network path was not found" when trying to open file shares in both directions using Windows Server 2008 Standard SP2 at both ends. The issue is identical to the KB article KB958285, however the hotfix is only valid up to but not including SP2. One of the servers in question has moved several times between 2 subnets seperated by a VPN. I have tried changing settings in and around the local NIC/DNS Suffix and in the network connection sharing centre, but with no luck. Firewalls are turned off at both sites, and pings and AD queries are successful (one server is a DC). DNS is also working correctly at both sites. Any help/suggestions would be appreciated.
    Richard

    I thought I would add in another scenario, since this link came to the top of my list in the search engine.
    We are running 2008 R2 with SP1 (it happened without SP1 as well)
    We could not map using UNC (IP, FQDN, or netbios name).  We could ping access the other servers via other utils like event viewer and services.msc but just could not map.
    In our case it turned out to be a VMWARE issue but we still had to make a regedit change first
    You have to go to regedit HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order\
    And add LanmanWorkstation to Providerorder
    I found on a Citrix board that citrix has an issue with this as well
    If you're running VM  here is an additional step you should do as well
    When you upgrade VMware Tools installed with HGFS from ESX 3.x to ESX 4.x, the HGFS driver may not get uninstalled properly. In this case, the virtual machine's network Provider Order tab in Network Connections
    > Advanced > Advanced Settings displays incorrect information and the virtual machine may lose network connectivity.
    To avoid this issue, uninstall VMware Tools 3.x before installing VMware Tools 4.x.
    To workaround this issue, if you have already upgraded VMware Tools:
    Click Start >
    Run, type regedit, and click OK. The Registry Editor window opens.
    Navigate to
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order\.
    Delete the reference to
    hgfs.
    Reboot the virtual machine.
    We found that if you strip out the HGFS, you do not have to reboot for the provider order tab to come back
    I hope that this saves people a lot of time.   I spent days researching this.
    This was the solution for me on 2008 R2 DC w/ Exchange.  I do not have VMWare installed but do have Hyper-V.  Thank you so much!

  • The required directory was not found

    "The required directory was not found or has a permission error."
    This is the error message I get when I try to authorize my Mac Pro (10.4.10). I have repaired permissions, restarted, reinstalled iTunes, re-linked the iTunes home folder and checked all folder for correct permissions.
    Joe

    OK, I just got off of the phone with Apple and still no joy. They had me try a few things that did not work, then told me to Archive and Install, which did not either. Anyway, thanks for the additional help very note worthy, but still no joy. Also an email to iTunes Support took me here
    http://docs.info.apple.com/article.html?artnum=93061
    I have a Users/Shared folder but since the files we are talking about are invisible, I can see how it is structured.
    And by the way I tried this one
    http://discussions.apple.com/message.jspa?messageID=3577004#3577004
    and it did not work. However, when I install a fresh copy of Tiger on the external it did authorize the computer and was able to play the downloads. But coping the invisible file to my boot drive was not successful. But , like I said the music did play when I started up from the external. So I guess that may be my only solution, unless someone can tell what the correct directory is and where it for iTunes downloads.

  • Mac OS X Flash installs, but plug-in still not found

    I've uninstalled the older flash (which wasn't working on several sites) and downloaded Flash 10.1. It downloads and seems to install fine - I get the message saying "installation complete" but I still get error messages on the sites that use it saying the plug in is missing. I also tried the Adobe test page and it says the plug in is not found.
    I'm really a newbie on the mac, so any help is greatly appreciated!!
    Thank you!!

    Hi folks,
    I have the same problem on my iMac. I downloaded and installed the program. Nothing (visible) happens....I also read the answer: to restart the computer...but the Flash-10 player is still invisible on my iMac, and the (hidden?) app. does not work. By the way, in my opinion, it' s odd that I don't see the Flash.app in my program files!?! What is the problem with all that ? Has anyone the ultimate solution? Thanks in advance!
    Harry

  • HT1727 How do you grant permission for home sharing and authorizing?  My mac did home share, but now says, "The required directory was not found or has a permissions error", when I try to authorize.

    How do you grant permission for home sharing and authorizing?  My mac did home share, but now says, "The required directory was not found or has a permissions error", when I try to authorize.

    OK, I just got off of the phone with Apple and still no joy. They had me try a few things that did not work, then told me to Archive and Install, which did not either. Anyway, thanks for the additional help very note worthy, but still no joy. Also an email to iTunes Support took me here
    http://docs.info.apple.com/article.html?artnum=93061
    I have a Users/Shared folder but since the files we are talking about are invisible, I can see how it is structured.
    And by the way I tried this one
    http://discussions.apple.com/message.jspa?messageID=3577004#3577004
    and it did not work. However, when I install a fresh copy of Tiger on the external it did authorize the computer and was able to play the downloads. But coping the invisible file to my boot drive was not successful. But , like I said the music did play when I started up from the external. So I guess that may be my only solution, unless someone can tell what the correct directory is and where it for iTunes downloads.

  • Music video that I PURCHASED says the requested url was not found on this server...***?

    When I go to play music videos that I PURCHASED from iTunes I get a pop-up that says "The reuested URL was not found on this server" so I have to go to friggin' iTunes and remove and readd all of my music videos. I bought the ipod (Touvh 4G) about a month ago and the idiots say that it's out of warranty so I have to pay more money to the pirates to get an answer. Is there something I can do to keep this crap from happening?

    This previous discussion has a solution:
    https://discussions.apple.com/message/16527576#16527576

  • Download from loop masters says "The requested URL was not found on this server.

    I'm downloading some audio files from http://www.loopmasters.com/ but whenever I try, in the download progress in the top right corner of safari, it'll stop downloading and say "The requested URL was not found on this server." There doesn't seem to be any rhyme or reason as to where in the download it'll stop. The first time got 37.3% of the way through, the second time got barely 12% (but my computer went to sleep this time,) and the last time it got to 34.8%. I can't do any more attempts because this website will only let me download it five times. Is there anything that's going wrong on my end, perhaps? Or is it likely just their servers being all wonky?
    Let me know if you need any other information :]

    This previous discussion has a solution:
    https://discussions.apple.com/message/16527576#16527576

  • Music - The requested URL was not found on this server

    Hi
    I have brought iphone 5 and most of all my songs are brought from itunes, I can not play my music application - everytime I click on a song to play I get an error message saying - "The requested URL was not found on this server" also all my music were not downloads into my iphone 5 from iphone 4. What can I do, please direct me. I have backed up my music and photos on my laptop, even my itune isn't showing all the music i purchased with apple.

    This previous discussion has a solution:
    https://discussions.apple.com/message/16527576#16527576

Maybe you are looking for