The item  can't be moved because AirPort Time Capsule can't be modified

have just set up my new airport time capsule done a time machine back up but can not add any files to it to share when i try i get the following message
"The item  can’t be moved because AirPort Time Capsule can’t be modified"
how do i change this
many thanks

pooldoc58 wrote:
have just set up my new airport time capsule done a time machine back up but can not add any files to it to share when i try i get the following message
"The item  can’t be moved because AirPort Time Capsule can’t be modified"
how do i change this
many thanks
How are you trying to add files??
You cannot add them to the TM backup?
TM owns the sparsebundle and you should not add files to any sparsebundle.. do not even attempt to.
You can create a new directory in the Time Capsule and copy files to that.. as long as you have turned on file sharing and give correct access permissions.
Mixing data and backups does have consequences though.
See Q3 here.
http://pondini.org/TM/Time_Capsule.html

Similar Messages

  • I can't connect to the drive on my airport time machine and am receiving the message: "AirPort Time Capsule" can't be opened because the original item can't be found.

    Time capsule has been working perfectly for months.
    Suddenly I can't connect to the drive on my airport time capsule and am receiving the message: “AirPort Time Capsule” can’t be opened because the original item can’t be found.
    Time machine appears to be still backing up (last backup within the last hour), but drive is not visible and I have files stored on it.
    I have tried rebooting everything in order as suggested for other issues, anyone got any ideas how to see the drive again??

    What OS are you running??
    It is very typical Yosemite issue.
    1. In airport utility does the TC show up.. if so click it.. and see the summary page which will include its IP address. That is what you are after.
    From my screenshot you can see the TC address is 192.168.2.57
    It might well show up briefly after a reboot or in ipad / iphone version utility. Yosemite is hopeless. The airport utility hardly works.
    2. In Finder use Go, Connect to server.
    Type in SMB://192.168.2.57 (replace with IP you discover).
    If it is possible it will request a password.. type that in and DO NOT FORGET.. to store it in your keychain.
    This will work until the TC changes IP which won't happen if it is main router.. but will happen if it is bridged.. so you need to tell me the whole network setup.
    Mavericks is nearly as bad and the above instructions should be universal except I would use AFP instead of SMB. Apparently Yosemite is now totally Windows oriented.

  • TS1253 Once I save my photos to the airport time capsule; can I delete them from the computer drive?

    Once my photos have been saved by the airport time  capsule can I delete them from my computer hard drive.

    Please think about this for a moment.
    If you move your images to the Time Capsule...and delete them from your computer's hard drive......then, the only copy of the images that you will have will be on the Time Capsule.
    So, now your "originals" are on the Time Capsule....since you deleted them from the computer's hard drive to create more space.
    When...not if....the Time Capsule has a problem and you cannot access your images.......where will your backups of your images be?

  • Can I use my new airport time capsule 3TB for my personal cloud

    I am trying to get my own personal cloud. Can I use my new airport time capsule to accomplish this?

    The Time Capsule stores data on its internal drive and not in the cloud. If you want it actually put in the cloud, it needs to be separately set up with a hosting or storage service.
    (92923)

  • What is the default username and password for a Airport Time Capsule 3TB

    What is the default username and password for a Airport Time Capsule 3TB

    There is no default user name on any of the AirPort routers, but the default password is......
    public

  • How can I make my new AirPort Time Capsule with VOIP?

    I purchased an AirPort Time Capsule because of the modem capability. The modem we have from the phone company isn't very good.
    Now I have a little problem. I forgot we have our phone over internet and I cannot figure out how to set it all up.
    Any ideas for my latest problem? I'd run back to the store/genius bar, but it's a ferry ride away and I'm not sure it would do any good to go back because all my phone "stuff" (cords, etc) wall jacks, is all here.
    Current set up is this:
    Modem box has ethernet (yellow) cable going from it to imac. It also has blue cable going from it to ATA Router (smaller black box). Each box (white larger "modem" box, and black smaller ATA Router) have a phone cord going from wall (2 separate jacks) to the box. And obviously each has it's own power cord.
    I tried moving all plugs from white modem box to AP TC, but there really isn't a phone jack on back of APTC. It clicked in place in one of the <--> ports, but I'm getting a flashing amber light on the front, and no internet connection.
    Any ideas for my latest issue?? I know so much more about computers than I ever wanted to know, but it obviously isn't enough.
    Thanks!

    I purchased an AirPort Time Capsule because of the modem capability.
    There is no modem in the airport routers.. they are all plain ethernet routers.
    It sounds like you have adsl modem.. and I would just leave it alone.
    But if you want to play and your ISP supports PPPOE and the modem allows bridging or bridge mode.. then you can bridge the modem and use TC to establish the link to the ISP.. on the internet tab use PPPOE and put in your ISP username and password.
    You can then plug the ATA into one of the LAN ports of the TC.
    Overall this is probably not a great idea.
    Exactly what modem are you talking about .. make and model from the base please?? Who is your ISP?
    What model is the ATA? Actual model numbers from it please.
    Generally you will plug the TC into the modem and use simple bridge mode.
    Even though the airport wizard might attempt to take over as main router.. please do the setup manually and choose bridge mode.
    See Airport Utility shows "unexpected error - please try again" when connecting to Time Capsule

  • Forgot password to access my Airport Time Capsule, can't restore Time Machine backup

    It is stupid, I know, but after the first time I setup Time Machine in my Airport Time Capsule (6 months ago) i never had to use the password because it stayed stored in my Keychain.
    Anyway, couple days ago I had to format the hard drive of my MacBook Pro and I did it thinking that I had a complete data backup stored in my Airport Time Capsule (encrypted data). It was late when I realized that I did not have the password written/stored anywhere. Nothing to do about it, just move on and start all over again.
    I need to clean up my Airport Time Capsule and set it to factory default. I already accepted that I will lose all my data and it is okay. So far all I found was how to reset the wifi user/password but nothing about deleting stored data or reset to factory default without having the encrypted password. Can you please help me? Thanks in advance!  

    The encrypted data is not related to the Time Capsule.. that is purely Time Machine.
    Very sorry for you.. it is one big danger when you encrypt.
    Reset to factory.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Wipe the hard disk. Open the airport utility go to the disk tab. Click on erase disk.
    Select just quick erase.. it just deletes the file table and is not secure but fine for your purposes.

  • Airport Time Capsule Can't Connect to BrightHouse Internet

    I have BrightHouse Internet service set up as follows:
    1.  Coax in
    2.  Splitter
    3.  Coax out to ARRIS modem/telephony combo (BrightHouse box) and Motorola Surfboard (BrightHouse box, for high speed access)
    4.  Cat 5 from Surfboard to Netgear WNR2000 router.
    Note:  The modem setup and splitter were installed by BrightHouse.
    I want to replace my Netgear router with the AirPort Time Capsule (which to this point I have been using only as a backup drive for Time Machine).
    Currently, when the AirPort is connected to a LAN port on the Netgear, I get internet to the AirPort (AirPort Utility says so).  With this configuration I have the following settings on the AirPort:
    1.  Network - Off (Bridge Mode)
    2.  Wireless network - Off (the broadcast conflicted with the wireless signal from my nearby Netgear WiFi)
    3.  Internet connect using DHCP
    4.  IPv6 configure automatically
    I have tried various settings to get the AirPort connected, but never works.  The Airport Congifurations seem OK (green light in AirPort utility), but the Internet connectivity when plugged into the port on the back of either modem is absent (yellow light in AirPort Utility).
    I've done all of the obvious stuff (made sure the ethernet cables are plugged into the proper ports, hard reset the Airport Time Capsule, reset both modems (even in very specific order).  No luck.
    Does anyone know if there is an issue with BrightHouse and AirPorts?

    Did you power down the modem and leave it off for at least 20min.. plus or minus.. say try 5min or try overnight.. but all cable services require the modem powered off so you can swap the router. That is because the first device to connect captures the public IP and is registered by MAC address to the ISP system. To get rid of that you need the modem off long enough for dhcp lease to reset..
    You also should factory reset the TC to do this. It is really hard to change roles on the TC by simple manual changes. Start afresh. None of your backups will be altered.
    Universal Factory Reset.. any model TC or AE.
    Unplug your TC/AE from power or turn off at the power point.
    Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
    Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
    Note..
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
    No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    After a reset the TC will go back to router default mode.
    Everything else on the network will also need rebooting. This is important to change over to the new router.
    Tell us how you go.
    If you still have issues what model TC running what firmware??

  • I can't get my airport time capsule to connect to the internet

    I can't get my new airport time capsule to connect to the internet. It works fine with my linksys router

    We cannot help with that amount of info..
    What internet type and modem do you have? Exact modem make and model may help.
    Is the linksys router also the modem? You do know there is no modem in the TC?
    How is the Linksys authenticating if it is plugged into the modem??
    If cable did you shut down the cable modem for at least 20min to change the router.. this is always required with cable system.. often the time is longer.. one hour or overnight even.

  • AirPort Time Capsule (firmware v7.7.3) has slow wifi connection to new Surface Pro 3

    I got a new Surface Pro 3 i7. I have all the updates for it. I ran into a problem that many others also ran into which was very slow WiFi performance. I utilized many troubleshooting methods and sources and I am currently inclined to believe this... the new Marvell AVASTAR Wireless-AC Network Controller drivers are not compatible with my Airport Time Capsule firmware version 7.7.3.
    Has anyone else experienced this?
    Is there another firmware version that works (older or newer)?
    Details:
    I tried all kinds of things, like changing the network drivers on the SP3 to many different versions. Many of the help forums recommended using the drivers dated 4/24/2014. This did seem to help, but not reliably. What I discovered is... if I connect using the SP3 WiFi to my network extension Airport Express on version 7.6.4, I reliably get 20-22 mbps (which is the best I can expect from my network and works great for my needs). But, when I connect to my primary network Airport Time Capsule, the best I can get is 1.5 mbps, but usually between .15 and .9 mbps. It's completely unusable in today's internet environment. At the same time, I used my iPhone and the Airport Utility to verify the connections.  I used SpeedTest.net on my MacBook, iPad, iPhone and Win8.1 HP laptop to verify that every other device was getting the 20+mbps. And they did.  Only the Surface Pro 3 couldn't perform when using WiFi through the Airport Time Capsule. The SP3 does achieve 20+ mbps like all my other devices, but only when connected to the Airport Express.
    The articles I read said that the network drivers on the SP3 seem to require the routers to be updated to the latest versions. Both the Airport Time Capsule and the Airport Express seem to be updated. When I go into their settings using the Airport Utility, there are no updates available.
    Of course this problem isn't replicated at the Microsoft store since they don't have apple routers.  So, their response is to upgrade the routers.  Extremely unhelpful when the Apple software is saying it is upgraded already. I can't believe this new Airport Time Capsule has to be retired because it isn't playing well with others, and I love the automatic backup it is providing for my MacBook. So, somehow, I need the Airport Time Capsule to work with the new WiFi card & drivers on my SP3, just like the SP3 is working properly with the Airport Express.

    Thanks for your input!
    1. No downgrade. Bummer, but understandable.
    2. Completely agree!!! I did too and then I had to redo it because I couldn't install a driver. I had to start all over and reinstall Win 8 then Win 8.1 over it. It was a colossal waste of time and endless frustration. If I can just get it modestly working, I'll take it. It doesn't have to be perfect right now.
    3.  Great suggestion! And the Microsoft forums are also a buzz. One suggestion I tried (and it seems to be working) is to set a separate wireless network name for the 5ghz band. I haven't thoroughly tested it yet, but I'm hopeful.  I t seems to have worked for some, but not others. The next thing I'll try is fixing the channel, but strangely, I didn't see that option in the AirPort Utility app on my iPhone. Is it only available through Mac/PC laptop/desktop software?
    4. Yup. Sigh. I actually have an old linksys. I retired it when I went 100% apple. I was hoping that things would work smoother. And they did! Until this SP3 came into my life. Arg.
    And and a few more details...
    the AirPort Time Capsule is 802.11ac
    the AirPort Express is 802.11n (2nd gen)
    I'm wondering if it is the AC connection that is the issue. Maybe since the Express always connects with n, it is OK....
    Nope. Just tested the SP3 again and it is maintaining it's connection to the AirPort Time Capsule utiling the 802.11a/n/ac mode and connecting to the 5Ghz special network name. So far so good... Fingers crossed...

  • Does Airport time capsule work well as a storage for large files, such as RAW Photos and HD Video?

    If Airport time capsule can work as a storage device, how reliable is it?  Are downloads into Airport dependent on internet speed, or on the time capsule wifi?

    If Airport time capsule can work as a storage device, how reliable is it?
    The Time Capsule was designed to be used for Time Machine backups, but can equally be used for storage. Like any network storage device it is relatively reliable. However, you should always have a good backup strategy for important files.
    Are downloads into Airport dependent on internet speed, or on the time capsule wifi?
    Data transfer rates "into" the Time Capsule are dependent on a number of factors. Which factors depend on the original source of the files. Regardless, the common factors will be the TC's internal hard drive interface and data write speeds of the drive itself.

  • How i can use "wake on lan" with time capsule

    1. Preference -> Energy Saver -> Options -> WOL check
    2. in airport utility
    internet>nat>defalt host check
    3.and I'd send magic packet.
    but it doesn't work
    How i can wake on my mac through time capsule.

    Can you be more specific ?
    Where do you send the WOL from? Another computer? From the same network? How are each machines connected ?

  • Data folder can not be opened in finding " AirPort Time Capsule " The operation can not be completed because the original item for " data" does not exist .

    Hi
    I have a " AirPort Time Capsule " (firmware 7.7.3) When I try to open the data folder in "finder". Then I got the message  " The operation can not be completed because the original item for " data" does not exist". I have a lot of data and I can understand why I get this message?
    Anyone who can help? Thanks..
    Br. Bo

    Get a USB drive of 2TB or more.. assuming your TC is 2TB. Either preformatted Mac or plug into your Mac and format it standard Mac OS Extended Journaled in disk utility.
    Do a full archive of the TC. You do this using airport utility. Do not click the erase disk.. I marked in green.. just the archive.. that is to backup the internal disk to the USB disk. It is not fast.. take it that the process will go at around 40-50GB/hr.
    Once you complete the archive .. it is a direct image of the data on your TC.. you can then plug it into your computer directly.. and then try and open the files you lost.. if you cannot open them.. open disk utility and fix the permissions.
    http://osxdaily.com/2015/01/13/repair-disk-permissions-mac-os-x/
    Or try the methods apple recommends..
    OS X Yosemite: Set permissions for items on your Mac
    It is possible to fix things on the USB drive because it is locally mounted.. but you cannot fix it on TC which is network drive.

  • Following error message 'The item "iPhoto Library" can't be moved because "10.0.1.3" can't be modified' pops up, when I'm trying to copy my iPhoto library to my  Synology NAS. Any thoughts what I need to do in order to succeed?

    Following error message 'The item “iPhoto Library” can’t be moved because “10.0.1.3” can’t be modified' pops up, when I'm trying to copy my iPhoto library to my  Synology NAS. Any thoughts what I need to do in order to succeed?

    Would you rather recomment me to change to another programme like to iphoto to store and work with my photos?
    I would use the NAS for documents and other data that do not need a library with database files inside. For iPhoto a small portable drive that you can plug in directly would be perfect; you can get one for 79$ http://mac-portable-hard-drive-review.toptenreviews.com/western-digital-review.h tml
    Before you try to copy your iPhoto library anywhere, make sure it does not have any inconsistencies, that could prevent copying. Run a rebuild, using the First Aid tools. See this post by Old Toad on how to do it: Re: iPhoto version 8.1.2
    The item “iPhoto Library” can’t be moved because “10.0.1.3”
    That error message is very typical for copying between incompatible file systems. I get this error message usually when I try to move iPhoto libraries or Aperture libraries to drives with MS Dos (FAT) or unix formatting, or when some of the image files inside the library contain ethnic characters (Umlaute), have very long file names, or the filenames contain other special characters.
    Do you have any other large data sets that you could try to move to your NAS instead of your iPhoto library?  Movies, Music? Then move these first to have enough working space, when you try to move the iPhoto library. If you are running out of space, it will be difficult for the OS to move large amounts of data at once. That will need working space.

  • I have used Airport Time Capsule with my iMac for several years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both?

    I have used Airport Time Capsule with my iMac for a couple years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both the iMac and MacBook Air? I don't mind losing earlier backups. I have excluded some items from backing up, but since the Airport Time Capsule is full, I can't even begin to back up the MacBook Air.

    On your Mac.......
    Open Finder > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit in the smaller window that appears
    Click on the Disks tab at the top of the window
    Click Erase Disk
    On the next window that appears, select the Quick Erase option, then click Erase
    The operation will only take a few minutes.
    Now you are ready to start new backups of both Macs.  Back up one Mac first, then back up the other.  Do not try to back up both Macs as the same time.

Maybe you are looking for