The License file is Improperly Signed

Updating our volume license aggreement with our new license returns the error message:
Error installing the license file:
File name.lic
Reason: The license file is improperly signed.
We are running on Windows2000 server because it is believed that VLM 1.0 is not supported on Windows2003.
We would like to
A: get our license installed properly
B: If the VLM is supported on Windows2003, transfer our VLM to the 2003 server.

First of all, the reason why you would be receiving this error is most likely due to modification of the license file. Only a few fields can you change within the license file without it needing to be resigned (such as port, vendor nilm, etc). The sign is what is used for authenticity of the license file.
Secondly, VLM 2.0 and 2.1 are supported in Windows 2003 Server. To get a new license file for a different server, email [email protected] with your server name, volume serial number (for Windows drive), and contract number, specifying VLM 2.1. With this information, they should be able to generate a new license file for you.
Additionally, if you have additional technical questions, I would encourage you to go to ni.com/ask (since the forums are typically more for development products moreso than license management software).
Thanks,
Andy McRorie
NI R&D

Similar Messages

Exception occurred while reading the license file.

Hi,
I am having the Weblogic 9.2 server installed on 64 bit JVM on Solaris. I have some EJB's deployed over there. When I use to try to connect to these EJB's from Windows 32 bit OS I am getting the following error.
Exception in thread "main" java.lang.RuntimeException: Exception occurred while reading the license file.
     at weblogic.security.utils.SSLSetup.getLicenseLevel(SSLSetup.java:143)
     at weblogic.security.utils.SSLSetup.getSSLDelegateInstance(SSLSetup.java:196)
     at weblogic.security.utils.SSLContextWrapper.<init>(SSLContextWrapper.java:27)
     at weblogic.security.utils.SSLContextWrapper.getInstance(SSLContextWrapper.java:22)
     at weblogic.security.utils.SSLSetup.getSSLContext(SSLSetup.java:380)
     at weblogic.security.SSL.SSLClientInfo.getSSLSocketFactory(SSLClientInfo.java:56)
     at weblogic.socket.ChannelSSLSocketFactory.getSocketFactory(ChannelSSLSocketFactory.java:125)
     at weblogic.socket.ChannelSSLSocketFactory.createSocket(ChannelSSLSocketFactory.java:75)
     at weblogic.socket.AbstractMuxableSocket.createSocket(AbstractMuxableSocket.java:207)
     at weblogic.rjvm.t3.MuxableSocketT3.newSocketWithRetry(MuxableSocketT3.java:252)
     at weblogic.rjvm.t3.MuxableSocketT3.connect(MuxableSocketT3.java:421)
     at weblogic.rjvm.t3.MuxableSocketT3S.createConnection(MuxableSocketT3S.java:79)
     at weblogic.rjvm.ConnectionManager.createConnection(ConnectionManager.java:1749)
     at weblogic.rjvm.ConnectionManager.findOrCreateConnection(ConnectionManager.java:1410)
     at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:448)
     at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:326)
     at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:261)
     at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:204)
     at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:226)
     at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:189)
     at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:154)
     at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:350)
     at weblogic.jndi.Environment.getContext(Environment.java:307)
     at weblogic.jndi.Environment.getContext(Environment.java:277)
     at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:247)
     at javax.naming.InitialContext.init(InitialContext.java:223)
     at javax.naming.InitialContext.<init>(InitialContext.java:197)
     at Test.main(Test.java:26)
But the same client works when I use it from same Solaris machine....
Please help with this to me. This is argent for me.
Thanks in advance ,Sachin

Thanks for reply... I am using all dependent files at the client side...I had license.bea as well at the client side but it was not in the root directory so after I put it in the root directory that error was gone.....
But I have issue with Certificates now... Actually I am using 32 bit jvm as client and the Weblogic is on 64 bit..
The error I am facing now is......
<Apr 17, 2009 2:13:41 PM GMT+05:30> <Warning> <Security> <BEA-090542> <Certificate chain received from ctsa-qa-s03 - 137.72.228.123 was not trusted causing SSL handshake failure. Check the certificate chain to determine if it should be trusted or not. If it should be trusted, then update the client trusted CA configuration to trust the CA certificate that signed the peer certificate chain. If you are connecting to a WLS server that is using demo certificates (the default WLS server behavior), and you want this client to trust demo certificates, then specify -Dweblogic.security.TrustKeyStore=DemoTrust on the command line for this client.>
Exception in thread "main" javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3s://ctsa-qa-s03:7009: Destination unreachable; nested exception is:
     javax.net.ssl.SSLKeyException: [Security:090542]Certificate chain received from ctsa-qa-s03 - 137.72.228.123 was not trusted causing SSL handshake failure. Check the certificate chain to determine if it should be trusted or not. If it should be trusted, then update the client trusted CA configuration to trust the CA certificate that signed the peer certificate chain. If you are connecting to a WLS server that is using demo certificates (the default WLS server behavior), and you want this client to trust demo certificates, then specify -Dweblogic.security.TrustKeyStore=DemoTrust on the command line for this client.; No available router to destination]
     at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:49)
     at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:773)
     at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:365)
     at weblogic.jndi.Environment.getContext(Environment.java:307)
     at weblogic.jndi.Environment.getContext(Environment.java:277)
     at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:247)
     at javax.naming.InitialContext.init(InitialContext.java:223)
     at javax.naming.InitialContext.<init>(InitialContext.java:197)
     at Test.main(Test.java:26)
Caused by: java.net.ConnectException: t3s://ctsa-qa-s03:7009: Destination unreachable; nested exception is:
     javax.net.ssl.SSLKeyException: [Security:090542]Certificate chain received from ctsa-qa-s03 - 137.72.228.123 was not trusted causing SSL handshake failure. Check the certificate chain to determine if it should be trusted or not. If it should be trusted, then update the client trusted CA configuration to trust the CA certificate that signed the peer certificate chain. If you are connecting to a WLS server that is using demo certificates (the default WLS server behavior), and you want this client to trust demo certificates, then specify -Dweblogic.security.TrustKeyStore=DemoTrust on the command line for this client.; No available router to destination
     at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:204)
     at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:154)
     at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:350)
     ... 8 more
Caused by: java.rmi.ConnectException: Destination unreachable; nested exception is:
     javax.net.ssl.SSLKeyException: [Security:090542]Certificate chain received from ctsa-qa-s03 - 137.72.228.123 was not trusted causing SSL handshake failure. Check the certificate chain to determine if it should be trusted or not. If it should be trusted, then update the client trusted CA configuration to trust the CA certificate that signed the peer certificate chain. If you are connecting to a WLS server that is using demo certificates (the default WLS server behavior), and you want this client to trust demo certificates, then specify -Dweblogic.security.TrustKeyStore=DemoTrust on the command line for this client.; No available router to destination
     at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:475)
     at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:326)
     at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:261)
     at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:204)
     at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:226)
     at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:189)
     ... 10 more
Please help me in this if you can

The license file will not be written to disk...

I keep having to write the serial number and user information when I run Final Cut Pro and any other Final Cut Studio apps.
It says: The license file will not be written to disk because the user does not have enough privileges.
So everytime I open a final cut studio program I am asked for this information again before running.
This is REALY annoying. I tried reinstalling, and it wouldn't help.

Click here and follow the instructions.
(26615)

How can i check the license file installed on the server CCM 6.1.4

Hi;
i have installed the CCM 6.1.4; and now i want to upgrade to 8.5, but i don't remenber witch type license i have uploaded ( normal or Hospitality).
how can i check the license file installed on this server???
thanks.

Hi Matthew,
I think your idea should work just fine, but you will need to work with;
[email protected]
To put together the proper license file due to this change called the "License MAC"
Customer Impact from New Licensing Procedures
Cisco Unified Communications Manager on VMware on Cisco UCS B-Series Blade Servers uses a different licensing model than Cisco Unified Communications Manager on an MCS server. The MAC address of the NIC card is no longer used to associate the license to the server.
Instead, the license gets associated to a license MAC, which is a 12 digit HEX value created by hashing the following parameters that you configure on the server:
•Time zone
•NTP server 1 (or "none")
•NIC speed (or "auto")
•Hostname
•IP Address (or "dhcp")
•IP Mask (or "dhcp")
•Gateway Address (or "dhcp")
•Primary DNS (or "dhcp")
•SMTP server (or "none")
•Certificate Information (Organization, Unit, Location, State, Country)
This hash of these fields is called the LICENSE MAC
Note : Once there is a change in any of the parameters that creates the License MAC, it will
give you 30 day grace period to generate a new license file for the CM based on new license
MAC.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/8_0_2/install/cmins802.html#wp584709
Cheers!
Rob

Exception occured while reading the license file.

Java Exception: java.lang.RuntimeException
Exception occurred while reading the license file.
java.lang.RuntimeException: Exception occurred while reading the license file.
at weblogic.security.utils.SSLSetup.getLicenseLevel(SSLSetup.java:143)
at weblogic.security.utils.SSLSetup.getSSLDelegateInstance(SSLSetup.java:196)
at weblogic.security.utils.SSLContextWrapper.<init>(SSLContextWrapper.java:27)
at weblogic.security.utils.SSLContextWrapper.getInstance(SSLContextWrapper.java:22)
at weblogic.security.utils.SSLSetup.getSSLContext(SSLSetup.java:380)
at weblogic.security.SSL.SSLClientInfo.getSSLSocketFactory(SSLClientInfo.java:56)
at weblogic.socket.ChannelSSLSocketFactory.getSocketFactory(ChannelSSLSocketFactory.java:125)
at weblogic.socket.ChannelSSLSocketFactory.createSocket(ChannelSSLSocketFactory.java:75)
at weblogic.socket.AbstractMuxableSocket.createSocket(AbstractMuxableSocket.java:212)
at weblogic.rjvm.t3.MuxableSocketT3.newSocketWithRetry(MuxableSocketT3.java:252)
at weblogic.rjvm.t3.MuxableSocketT3.connect(MuxableSocketT3.java:421)
at weblogic.rjvm.t3.MuxableSocketT3S.createConnection(MuxableSocketT3S.java:79)
at weblogic.rjvm.ConnectionManager.createConnection(ConnectionManager.java:1729)
at weblogic.rjvm.ConnectionManager.findOrCreateConnection(ConnectionManager.java:1392)
at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:445)
at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:323)
at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:263)
at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:206)
at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:226)
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:189)
at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:154)
at weblogic.jndi.WLInitialContextFactoryDelegate$1.run(WLInitialContextFactoryDelegate.java:342)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:337)
at weblogic.jndi.Environment.getContext(Environment.java:307)
at weblogic.jndi.Environment.getContext(Environment.java:277)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
at javax.naming.InitialContext.init(Unknown Source)
at javax.naming.InitialContext.<init>(Unknown Source)
I read in the community, that i need to set -Dbea.home="Directory", the Directory should refer to the path where license.bea file is kept on the client side. After setting this i need to pass the
-Dbea.home="path" to the client jvm.
Am using tomcat 6.0 server, and weblogic server 10.0.1. I kept license.bea file in bin folder of the tomcat server. But i dint understand how to set -Dbea.home="path" and how to pass it to the client jvm. Am stucked up hear. Can pls anyone help me, to overcome this issue.

Hi,
Thank you for contacting us, the best community to place your question is at the OTN JAVA: https://home.java.net/?intcmp=JNET-javanet-sm
Please let us know if you have any question about OPN CLOUD! Have a great day!

How to install and verify the license file on ASA 5512-x

Hi Friends,
How to install and verify the license file on ASA 5512-x Firewall. I have lincese pak for CX and web security essential.
What need to be done? can i install this lic file on firewall or need to be install on CX server. Because i dont have the CX server right now.
Please share me document for installation of this license.
thx
Ashish Kumar

Hi,
one possible solution is to use an intermediate array. The intermediate array should be used in the user interface. When new data is entered the VI should read each element and then compare to the elements in the stored array. If all elements are different then update the array, otherwise display a fault message.
You could use asequence activated when the Enter button is pressed. In the first frame you would compare the First array with the stored array. it is probably best to use a Boolean indicator to show if the data is valid Make sure you declare this as a local variable.
With the sequence you can perform the comparisons in several seperate frames or in one frame with a OR to link the results. For large numbers of comparisons I prefer to use m
ultiple frames because otherwise the screen becomes a maze of wires and other programmers who may need to maintain the code in the future will find it hard to follow a single frame.
Once all the data items have been compared then the following sequence should contain a CASE statement of type True/False. Link a readable copy of your local variable to the selector of this statement. Then in the FALSE case (Assuming you have linked the boolean to be false when no data is duplicated) copy the new array to the stored array. In the TRUE case bring up an error message.
So long as your arrays are not too large and you do not use this technique in too many places in your code the processor overhead should not be badly affected. For frequent use of such a caomparison in several VIs you may want to create a dedicated subVI for the task. For very large arrays you should seek a different solution.
Hope that helps a bit.
Good luck,
Shaf

Does Anybody know how to keep the license files and Certificates in ISE-3315 During the upgrade.

Hi,
I have two ISE-3315 Appliances in production network.
I need someone's help to explain, how to make the Secondary node as the primary admin note to reset-config.
And then I would like to know how to keep the license files and Certificate during the Upgrade.
Please help me to answer my questions.
Thanks
CSCO11872447

The Cisco Identity Services Engine (ISE) provides distributed deployment of runtime services with centralized configuration and management. Multiple nodes can be deployed together in a distributed fashion to support failover.
If you register a secondary Monitoring ISE node, it is recommended that you first back up the primary Monitoring ISE node and then restore the data to the new secondary Monitoring ISE node. This ensures that the history of the primary Monitoring ISE node is in sync with the new secondary node as new changes are replicated.
Please Check the below configuration guide for Secondary ISE- Nodes.
http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_dis_deploy.pdf

Cutting the license file

Hello,
We will do modification on the hardware and software architecture.
To gradual changes of physical servers and versions of business one (2007 -> 8.81), we wonder if it is possible to split the license file?
For example, using 390 licenses of professional production in 2007 and 10 licenses on the test 8.81 in order to validate the changes of environment.
To do this, is it possible to create a second temporary system on the number of existing facilities ?
We merge the two license files after the production of the target architecture.
Thank you for your support,
Kind regards,
Amine Z.

Hi,
It is not possible to split license file.
You can request for the temp license file for 8.81 testing based on your license in 2007.
Contact your partner for that.
Thanks,
Neetu

Where is the license file?

Hi,
I'm upgrading 3.0.1 to 3.2 version. In the process of upgrade, the setup program asked me for license file. I was thinking it will automatically found old one. I found several license files in my system:
Under \CSCOpx\etc\licenses there are 5 .lic files. Do I need select them all to upgrade?
Thanks.
Lou

Thanks Joe for quick response. I guess somebody just used 3.0.1 eval to install before. I searched the system and found there is one directory: Ciscoworks 3.0\eval and there are cm.lic, dfm.lic, ipm.lic, rme.lic. When I open these files, I see there is "Evalution" word in every file. Also I find there is another lic file in the current program files directory called "LMS20090903071445912.lic". 20090903 is the last time when they installed the Ciscoworks. Should I use this LMS20090903071445912.lic file? There is no evaluation word in this file and this file includes all components licenses we bought.
Thanks.
Lou

Unable to import the License file

Dear Experts,
I am facing a very critical issue,
I have a new server and i have installed the basic pack of SAP 2005B PL 05.
Now i have requested a license key and tried to import it.It throws me an error stating "unable to verify digital signature for license file".
I have referred the SAP Note and tried out few suggestions but it did'nt help me.
Am i missing anything here, pls advice. Issue is very critical.
Thanks
Deepak

Hi!
SAP License is not support for older version of SAP. You need to install SAP B1 2007B PL 10 or above version.

License file installation failed : The license file failed to parse."

Hi, can anyone please help me with this problem, I have installed ACS 5.1.0.44 on vmware and I got a eval licence from cisco but each time I'm try to install the licence using the web interface I get this error...What am I doing wrong?

Hey Thanks for that -
I was getting the license from here...
https://tools.cisco.com/SWIFT/Licensing/PrivateRegistrationServlet?DemoKeys=Y
but selecting Cisco Secure ACS View Evaluation not Cisco Secure Access Control System Evaluation as I should have been!
Cheers

How to view the license file

Hi
We have FMS 3 installed in two boxes with load balancer and
we wanted to know max connections and bandwidth information of that
FMS server. After viewing few topics here, I feel its included as
part of license agreement.
FMS is installed in Linux box and we don't have GUI for that
to view license information with Management Console.
How can I view max client connections and bandwidth
information of the installed server.
Thanks in advance,

In my experience I've always maxed out the bandwidth
available at the NIC before maxing out system resources. I always
use Windows for FMS, but unless you have some bad-*** 10gigE NIC
cards in your servers (I almost always have 1 or 2 1Gbps cards to
work with), I bet you'll find the same results on your Linux boxes.
What bitrate will your videos be encoded at, and what is the
capacity of the NICs on the FMS machines?

Not able to play some of the copyrighted or licensed files

Hi,
Since a month or so, I am not able to play most of my wma files, which were ripped from original audio CDs. The problem is not universally applicable to all of the licensed files because there are some, I am able to play(but that is only a minority, as that
represents music from just one original audio CD).
A few times in between I am able to play these files, but I am unable to find any correlation with any action/task performed. This problem resurfaces again and again.
I tried restoring the computer, but didn't solved it. Restarted, fixed the registry errors, but to no avail.
Please note that I am also having blue screen errors from time to time (one error in a day or two). The blue screen of death comes just randomly and computer restarts.
I also vaguely remember that a few weeks back, I solved this problem by typing some command in command prompt. I tried to find out that web page(from where I got this command), but couldn't. It was may be a registry problem. But, I am not 100% sure about all
this.
Below are the outcomes on different players:
Winamp:- Nothing happens
WMP:- A message comes "The player is not installed correctly, please reinstall the player"
VLC:- Tries to play repeatedly, not able to play.
I recorded the messages of VLC on a verbosity of 2 i.e. debug mode:
lua debug: Trying Lua playlist script C:\Program Files (x86)\VideoLAN\VLC\lua\playlist\youtube_homepage.luac
lua debug: Trying Lua playlist script C:\Program Files (x86)\VideoLAN\VLC\lua\playlist\zapiks.luac
ps warning: this does not look like an MPEG PS stream, continuing anyway
main debug: using demux module "ps"
main debug: looking for a subtitle file in C:\i omega\manu\My Music\ENGLISH(ORIGINAL)\POWER BALLADS-1\
main debug: looking for meta reader module matching "any": 2 candidates
main debug: using meta reader module "taglib"
main debug: removing module "taglib"
main debug: `file:///C:/i%20omega/manu/My%20Music/ENGLISH%28ORIGINAL%29/POWER%20BALLADS-1/another%20day%20in%20paradise.wma' successfully opened
ps warning: garbage at input, trying to resync...
ps warning: found sync code
ps warning: garbage at input, trying to resync...
main debug: selecting program id=0
main debug: looking for decoder module matching "any": 39 candidates
main debug: using decoder module "mpeg_audio"
mpeg_audio debug: waiting for PTS
ps warning: found sync code
ps warning: garbage at input, trying to resync...
main debug: EOF reached
main debug: finished input
main debug: removing module "mpeg_audio"
main debug: killing decoder fourcc `mpga', 0 PES in FIFO
main debug: removing module "ps"
main debug: Program doesn't contain anymore ES
main debug: removing module "record"
main debug: removing module "filesystem"
main debug: dead input
main debug: changing item without a request (current 0/1)
main debug: using item 0
main debug: starting playback of the new playlist item
main debug: resyncing on another day in paradise.wma
main debug: another day in paradise.wma is at 0
main debug: creating new input thread
main debug: Creating an input for 'another day in paradise.wma'
main debug: using timeshift granularity of 50 MiB, in path 'C:\Users\Abhay\AppData\Local\Temp'
main debug: `file:///C:/i%20omega/manu/My%20Music/ENGLISH%28ORIGINAL%29/POWER%20BALLADS-1/another%20day%20in%20paradise.wma' gives access `file' demux `' path `/C:/i%20omega/manu/My%20Music/ENGLISH%28ORIGINAL%29/POWER%20BALLADS-1/another%20day%20in%20paradise.wma'
main debug: creating demux: access='file' demux='' location='/C:/i%20omega/manu/My%20Music/ENGLISH%28ORIGINAL%29/POWER%20BALLADS-1/another%20day%20in%20paradise.wma' file='C:\i omega\manu\My Music\ENGLISH(ORIGINAL)\POWER BALLADS-1\another day in paradise.wma'
main debug: looking for access_demux module matching "file": 12 candidates
main debug: no access_demux modules matched
main debug: creating access 'file' location='/C:/i%20omega/manu/My%20Music/ENGLISH%28ORIGINAL%29/POWER%20BALLADS-1/another%20day%20in%20paradise.wma', path='C:\i omega\manu\My Music\ENGLISH(ORIGINAL)\POWER BALLADS-1\another day in paradise.wma'
main debug: looking for access module matching "file": 20 candidates
filesystem debug: opening file `C:\i omega\manu\My Music\ENGLISH(ORIGINAL)\POWER BALLADS-1\another day in paradise.wma'
main debug: using access module "filesystem"
main debug: Using stream method for AStream*
main debug: starting pre-buffering
main debug: received first data after 0 ms
main debug: pre-buffering done 1024 bytes in 0s - 1000000 KiB/s
main debug: looking for stream_filter module matching "any": 6 candidates
main debug: no stream_filter modules matched
main debug: looking for stream_filter module matching "record": 6 candidates
main debug: using stream_filter module "record"
main debug: creating demux: access='file' demux='' location='/C:/i%20omega/manu/My%20Music/ENGLISH%28ORIGINAL%29/POWER%20BALLADS-1/another%20day%20in%20paradise.wma' file='C:\i omega\manu\My Music\ENGLISH(ORIGINAL)\POWER BALLADS-1\another day in paradise.wma'
main debug: looking for demux module matching "asf": 63 candidates
asf warning: unknown asf object (not loaded): 0xd9aade20-0x7c17-0x4f9c-0xbc288555dd98e2a2
asf warning: unknown asf object (not loaded): 0x1efb1a30-0xb62-0x11d0-0xa39b00a0c90348f6
asf debug: + 'Unknown'
asf debug: | + 'Header'
asf debug: | | + 'File Properties'
asf debug: | | + 'Content Encryption'
asf debug: | | + 'Extended content description'
asf debug: | | + 'Header Extension'
asf debug: | | | + 'Language List'
asf debug: | | | + 'Unknown'
asf debug: | | | + 'Metadata'
asf debug: | | | + 'Padding'
asf debug: | | | + 'Extended Stream Properties'
asf debug: | | | + 'Unknown'
asf debug: | | + 'Unknown'
asf debug: | | + 'Codec List'
asf debug: | | + 'Stream Properties'
asf debug: | | + 'Stream Bitrate Properties'
asf debug: | + 'Data'
Any sort of help/suggestion will be appreciated. Thanks!

Hi,
>A message comes "The player is not installed correctly, please reinstall the player"
Could you please share more details about the error messages?
Regarding the error messages showed above, have you tried to reinstall Windows Media Player by
Turn Windows Features on or off?
For VLC issue, please consider seek help in their offical website for further assistance.
Thank you for your understanding.
Best regards
Michael Shao
TechNet Community Support

The iAS 6.5 distribution on the SUNONE Starter Kit DVD contains a misnamed license file

The license file needs to be renamed from ias_LICENSE.txt to LICENSE.txt prior to starting the installation of iAS 6.5

Sorry to have not replied to this thread earlier.....forgot all about it.
The reason init was being called twice by IPanet (Sun One) is IPanet comes with a default context called "Search" already in server.xml file.
This context was loading all the classes on my class path and this causing "init" to run. Then my context entry also loaded all the files in the class path.
Quite why Sun include this "Search" context is beyond me......annoying. If you take it out the the problem goes away.
Basically if you leave this in then your running to web servers (JVM's) your one and Sun's stupid "Search" one. As they are separate JVM's no amount of synchronisation would ever fix it.

This License file is from the legacy version, order a new license file.

Hello,
I have upgraded the SAP 2007 to SAP 8.81 but while uploading the license file, its showing error like this 'This License file is from the legacy version, order a new license file'. Product version is SAP BUSINESS ONE 8.81.
Kindly advise.
Thanks,
Yousuf Muhammad

Hi Yousuf Muhammad,
Welcome To SAP Community Network Forum
When we have upgrade SAP 2007 to SAP 8.81 its mandatory to download new license file its by design and thats not an error.
Thanks,
Srujal Patel

The License file is Improperly Signed

Similar Messages

Maybe you are looking for