The Mavericks 10.9.3 update HDMI issues.
The Mavericks 10.9.3 update has caused the HDMI port on my current gen MacBook Pro to stop working.
A reboot fixes it, for a while.
This is on top of a similar issue with there being no sound after being going to sleep 2-3 times. This is also solved by a reboot, but has been an issue since I purchased the laptop.
Any suggestions?
Video Troubleshooting Internal and External Monitors
The article suggests trying to reset the PRAM and SMC as one of the steps.
Similar Messages
-
AE CS6 won't run after the Mavericks 10.9.3 update
My AE CS6 won't run after the Mavericks 10.9.3 update the other day. I was prompted that the current version of my AE was 11.0, so I searched and found the seemingly most up-to-date here: Adobe - After Effects : For Macintosh : Adobe After Effects CS6 11.0.4 Update : Thank You
My question is this: since I'm new to Mac, should I download the update and install it to my existing instance of AE and it will allow AE CS6 to run as normal? And the way to install the update is simply to double-click the .dmg?
Thanks!Instructions for installing the update are on the download page here:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5696 -
IMac gets hung up on SoftwareUpdateLauncher when doing the Maverick 10.9.2 update this morning.
After software update from the AppStore it hangs up during the reboot process in SoftwareUpdateLauncher. Must do a hard shutdown to recover. It reboots under old OS version but is still looking for the the reboot to complete the update which always hangs when shutting down. Applied the update to my MacBook with no issue.
Hello fordste
If the update did not take and are stuck with continuously trying to update, then the next step would be reinstall the OS X Mavericks to get it sorted out.
OS X Mavericks: Reinstall OS X
http://support.apple.com/kb/PH13871
Regards,
-Norm G. -
Question is simple enough, Oh and by the way, my system is NOT what this forum page has decided to tell me that it is (no way evident to change it).
Hi Arthur,
Thanks for taking the time to reply.
1. I am glad your Mavericks doesn't have the problem. I am sure there are a lot of Mavericks out there that don't have the problem, and yes, you are correct, I, along with ALL of the other people that are complaing of this problem all over the internet, including this support forum itself, are having problems with our own Mavericks installations.
2. Agreed, Apple doesn't have a good track record of admitting to the bugs in its Operationg Systems, but don't worry, Microsoft is just as bad. Technology is about making money after all.
3. Thanks for the instructions for updating my profile.
4. I took the precaution of removing all of my data from this machine. and wiped its harddrive.
I did a fresh install of Snow Leopard (the OS it came with), upgraded to Mountain Lion, and then upgraded to Mavericks before doing anything at all to the machine, and before installing anything on it.
So with this Fresh, brand new install of Mavericks (I dont trust upgrades - for good reason) I installed Open Office, Adobe Creative Suit CS6, Google Chrome, Filezilla, Firefox and Thunderbird, and Microsoft Remote Desktop client.
That's it.
The font that will not install is any of the fonts from the Univers family.
We have had this font in our office for the seven years I have worked there. It installs fine on all Macs from Tiger (10.4) to Mountain Lion (10.8) (I have just finished tesing this on a number of these machines).
We have one other mavericks machine but this font was already installed on it when it was upgraded from Mountain Lion to Mavericks so it works.
here is the report from EtreCheck:
Hardware Information:
MacBook Pro (13-inch, Mid 2009)
MacBook Pro - model: MacBookPro5,5
1 2.26 GHz Intel Core 2 Duo CPU: 2 cores
8 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 0 days 0:53:47
Disk Information:
Hitachi HTS545016B9SA02 disk0 : (160.04 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 159.18 GB (30.03 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS23N
USB Information:
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
Startup Items:
HWNetMgr: Path: /Library/StartupItems/HWNetMgr
HWPortDetect: Path: /Library/StartupItems/HWPortDetect
StartOuc: Path: /Library/StartupItems/StartOuc
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.adobe.SwitchBoard.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
Launch Agents:
[System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[System] com.adobe.CS4ServiceManager.plist 3rd-Party support link
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[not loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
iTunesHelper
Internet Plug-ins:
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 3rd-Party support link
FlashPlayer-10.6: Version: 12.0.0.44 - SDK 10.6 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 10.1.9 3rd-Party support link
AdobePDFViewer: Version: 10.1.9 3rd-Party support link
Flash Player: Version: 12.0.0.44 - SDK 10.6 Cannot contact Adobe
JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Java 3rd-Party support link
Bad Fonts:
None
Old Applications:
dynamiclinkmanager: Version: 6.0.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Adobe/Common/dynamiclink/CS6/dynamiclinkmanager.app
dynamiclinkmediaserver: Version: 6.0.1 - SDK 10.5 3rd-Party support link
/Library/Application Support/Adobe/Common/dynamiclinkmediaserver/1.0/dynamiclinkmediaserver.app
Time Machine:
Time Machine not configured!
Top Processes by CPU:
4% WindowServer
2% EtreCheck
1% firefox
0% ouc
0% loginwindow
Top Processes by Memory:
369 MB firefox
188 MB thunderbird
147 MB soffice
147 MB com.apple.IconServicesAgent
115 MB mds_stores
Virtual Memory Information:
5.24 GB Free RAM
1.46 GB Active RAM
490 MB Inactive RAM
584 MB Wired RAM
394 MB Page-ins
0 B Page-outs
This is a lot more information than has been provided by almost all of the other posts on all the forums I have been reading about this problem, and most of the posts have a lot of people chiming in saying,
"It works fine for me, so it must not be a problem".
Not a lot of help has been forthcoming for the others in this same situation that I have been reading of, and most are resorting to Third Party Programs in an attempt to get fonts installed, all with varying degrees of success.
I am not willing to use a third party program to do something the operationg system should be able to do itself.
I have tried pasting the fonts themselves into all of the various fonts folders in the OS, to no avail.
I will be very interested to hear what you make of the information I have supplied.
Thank you again for your reply. I look forward to hearing back from you. -
Problems with iRig after the Mavericks 10.9.2 update
Mavericks is not recognizing iRig as an external microphone when plugin it. iPhone headphones (and mic) work fine. Anyone with the same problem, i have the same issue on 2 Retina macbooks.
I've got the same problem. No information form apple or Ik Multimedia
-
Mavericks 10.9.1 update not appearing in Server's Software Update service?
While I have been able to update my server to 10.9.1, my client computers all rely upon my server for their software updates. And although i have repeatedly had the Software Update service fetch all new updates over the last day or so, the Mavericks 10.9.1 update still isn't showing up.
Does anyone else who is using the Software Update service actually have that update available to them, or is this a case of Apple simply not having made this update available to that service yet? And if so, does anyone have an idea of how much of a delay should I expect?Hi again
Try running the following command in the terminal on your clients:
defaults read /Library/Preferences/com.apple.SoftwareUpdate CatalogURL
The desired return value should be*:
http://server.mydomain.com:8088/content/catalogs/others/index-10.9-mountainlion- lion-snowleopard-leopard.merged-1.sucatalog
*The base URL might be different depending on if you are using standard SU settings or if you have moved the files somewhere else.
If this is not your return value try running this on your clients again:
sudo defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL http://server.mydomain.com:8088/content/catalogs/others/index-10.9-mountainlion- lion-snowleopard-leopard.merged-1.sucatalog
You can reset the settings by running this command:
sudo defaults delete /Library/Preferences/com.apple.SoftwareUpdate CatalogURL -
Mac mail not working after Mavericks 10.9.4 update
Help! Mac Mail was working fine, on all 3 of my different email accounts, until I did the Mavericks 10.9.4 update yesterday. Now I cannot receive or send mail and it shows all accounts are offline. Connection doctor says it cannot connect to server. I am able to get online fine and I check with my provider Verizon and all is working perfectly with them......it must be something to do with the update that screwed something up. Any help or suggestions would be AWESOME!
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages -
My HDD is taken by the Mavericks Installer as the Time Machine Backup Disk
When trying to reinstall OS Mavericks (the Mavericks present installation is presenting some issues), as I did on my iMac and worked fine, the original HDD cannot be selected because it is recognized as the Back Up Disk. The time machine set up, at Systems Preference, is OK.
See post by jaystad.
https://discussions.apple.com/message/23499613#23499613
http://pondini.org/OSX/MigrationProblems.html -
Please help my computer is not repsonding after doing some simple updates. I follow the instructions and which is simply click for the update to take place. I did what I was instructed to do. I did not do the new update for the Mavericks yet. I just did simple updates. The computer shutted down and restarted but would never get pass the grey screen with the spinning wheel and the booting bar that would not go past a certain point befor shutting off again. The computer is practically brand new. I purchased the computer from best by 2012 and the warrenty just ended the past October. I hardly use the computer maybe 4 times since I have had it because I have another main computer that I uses. However, I don't want to do a hard rest becuase I do have the entire adobe suits software that I paid for and don't want to loose. I have an appointment with apple today to see what they say but I hope that my computer that I hardly every use is not defected after doing a updated pushed by Apple. Any thoughts or suggestions???? Thanks in advance Apple Family :-)
Well, I was at Apple for sometime on that day. I got a Genius that did not want to work. She basically jumped to the money to tell me that my hard drive was no good and that I was out of warranty (October 2013). I began to explain to her that I had only used the computer 5 times and that I don't use this computer as my main computer because I also have a Toshiba that is less expensive that I have had for several years and not one issue out of it. The rep told me that I could by a new hard drive for $161.00 and that I would loose all of my software and photos that I have on this computer. However, I told her that it's bazaar that it happens right after my warranty goes out and had I used it more often when in warranty before October then I would have been covered. Keeping in mind that I would still be very disappointed with the product because I would loose all of my information and it would not make sense to me why the hard drive fails on a very gently used computer. So I asked for a manager and it took her some time to get one. In the mean time I watched how the other Geniuses interacted with the other customers and seen that they were very engaging with convo and very help. I guess I just I got another lemon when I got my rep. When the manager finally came. I went from A-Z with the issues and that I felt that something could or should be done because the rep said that she did tests on my machine and it read to her that my hard drive was bad and there was nothing that could be done. I explained that I was not looking forward to paying for services to have my new computer repaired. The manager offered to give me 25% off the cost but I still didn't feel that it was effective. After he left and the rep wrote the notes in the system, I told her that I didn't think that all options had been exhausted and that there was something else that could be done. I told her to erase the machine and see if the updates could be installed and if the system would continue to do the same thing. The rep was hesitant and said that I would loose everything which we already know that we were at conclusion from the beginning. She assured me that I would happen again and that I would need a new hard drive. I just told her to erase the machine and get me another manager because I was just getting tired of her unhelpfulness and negative perspective. The new manager came and was very pleasant and I explained everything once again from A-Z. I informed him that I had the machine erased and that I need his help with options because I don't feel that the rep or the last manager was resourceful or helpful. He apologies for the actions of the reps and proceed to tell me that they will run all the updates in the store and that if it booted correctly that I should continue to use the machine with out adding the adobe software back on just incase that it crashes again and I'm out of money once again. However, if it does happen again and it is a hard drive issues that he would work with me to resolve the issues. As my computer went through the process of rebooting from out of the box stage another rep approached me because he could tell that I was upset and not happy. I told he what had happen and he said I think I can help you a little more. He said that I just want to run further testing on you computer for different components to make sure that everything would work properly and pin point any issues. I was delighted with that option. Anything would help at this time especially someone who is willing to help. The first test that he ran was to for the hard drive and he said that since it failed the test the first time could be because the software update glitch and did update correctly which would make the test faulty and be negative. As I sit with finger crossed the test came back as a pass test that my hard drive was not the issue and that the update was the cause and that I did not have to buy a new hard drive. I was happy that the computer was ok but I lost information. All of the updates were done in the store and everything works fine now. If I was not persistent about my gut feeling then I would had left out thinking that I had to pay for a new hard drive that I really didn't needed. Now I can invest that money in a external hard drive to start backing up my information. Lesson learned by I'm still on the fence about things but I hope all is well. I really went through a lot. No help or no service was not an option that I was taken. I hope that it helps.
-
Connecting through HDMI worked fine, until the recent firmware update and the 10.7.5 OS update. Now, both retina display and projector dosplay go blank, with the screen coming back when unplugged from the projector.
Clone your system.
Never apply updates w/o one.
And yes there is a page with all the Apple Downloads to do manually and then you can keep it on hand. Same for the OS X Lion or ML installer - save them before running. Still on 10.6.8 so you have OS X 10.6 DVD.
Combo updates do not do any harm. There could be issues to the drive directory beforehand.
Mac Pro has been shipping with Lion since summer 2011, though you can even now still reinstall iwth 10.6.4+ -
After updating to Mavericks and trying to updates for my apps I get : This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. My apple id has always been .mac but after the update I used .me. Are these not synonymous?
Hi everyone yesterday I was experiencing the same problem I am glad to share its fixed now for me
"This issue is only related to our Apple ID and to to those specific apps which we already have on phone or had installed on phone before except for those apps which we already have in purchase history AppStore>Updates>Purchase(on iPhone) History(having cloud icon next to them) it's something related to our purchase data
*ITS NOT RELATED TO PHONE OR MAC!
*RESETTING OR UPDATING THE DEVICE WONT MAKE A DIFFERENCE!
(As in my case it was on iPhone 4 7.1.1 iPhone 5s 7.0.3 and iTunes of course )
Here is how I got it fixed
I contacted apple support via chat method and I asked about a solution giving my info.she told me that she submitted my application and in order to resolve this I should not be using my AppStore ID for any purchase for at least 30mins as doing so may not resolve the issue so I checked it after couple hours and it's fixed
(As I read in some other discussions that some people asked for solution from apple support and they told them to reset the device or so.. You may need to make your statement clear that it's appearing both on iTunes and iPhone ) -
Why doesn't my "notes" show within mail sidebar since the Maverick update?
Why doesn't my "notes" show within mail sidebar since the Maverick update?
Doing it over Wifi? I was having the same issue. I restarted my router and voila.
-
I updated the maverick and now mail won't open at all
i updated the maverick and now mail won't open at all
Have you tired opening it from the Applications folder?
What happens when you try to open Mail? -
Software Updates ADR Issue: "Failed to download the update from the internet. Error = 5"
"Failed to download the update from internet. Error = 5"
The above is the error I am getting when running any ADR. The error is quite clear software updates are failing to download and Error = 5 being a permissions error its clear that the downloads are failing due to incorrect permissions applied to the download
path.
Here is the last bit of my ruleengine.log, everything above is the same except for the update trying to be downloaded of course:
Failed to download the update from internet. Error = 5
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Failed to download ContentID 16860969 for UpdateID 16857152. Error code = 5
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Downloading contents (count = 1) for UpdateID 16857255
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
List of update content(s) which match the content rule criteria = {16861141}
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Downloading content with ID 16861141 in the package
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Failed to download the update from internet. Error = 5
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Failed to download ContentID 16861141 for UpdateID 16857255. Error code = 5
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Failed to download any update SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Failed to download update contents. SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
No new update was added to the package. Package "SCP0008A" would not be updated.
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Failed to run the DownloadAction for the AutoDeployment.
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
STATMSG: ID=8706 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_RULE_ENGINE" SYS=SCCM-MPS.DSCICORP.COM SITE=SCP PID=2376 TID=5148 GMTDATE=Thu Jun 26 13:22:00.164 2014 ISTR0="SMS Rule Engine" ISTR1="Failed to download one or more
content files" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Enforcing Create Deployment Action SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Create Deployment Rule Action XML is: <DeploymentCreationActionXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><CollectionId>SCP00055</CollectionId><IncludeSub>true</IncludeSub><Utc>false</Utc><Duration>0</Duration><DurationUnits>Hours</DurationUnits><AvailableDeltaDuration>0</AvailableDeltaDuration><AvailableDeltaDurationUnits>Hours</AvailableDeltaDurationUnits><SuppressServers>Checked</SuppressServers><SuppressWorkstations>Unchecked</SuppressWorkstations><PersistOnWriteFilterDevices>Unchecked</PersistOnWriteFilterDevices><AllowRestart>true</AllowRestart><DisableMomAlert>false</DisableMomAlert><GenerateMomAlert>false</GenerateMomAlert><UseRemoteDP>true</UseRemoteDP><UseUnprotectedDP>true</UseUnprotectedDP><UseBranchCache>true</UseBranchCache><EnableDeployment>true</EnableDeployment><EnableWakeOnLan>true</EnableWakeOnLan><AllowDownloadOutSW>false</AllowDownloadOutSW><AllowInstallOutSW>true</AllowInstallOutSW><EnableAlert>true</EnableAlert><AlertThresholdPercentage>90</AlertThresholdPercentage><AlertDuration>7</AlertDuration><AlertDurationUnits>Days</AlertDurationUnits><EnableNAPEnforcement>false</EnableNAPEnforcement><UserNotificationOption>DisplaySoftwareCenterOnly</UserNotificationOption><LimitStateMessageVerbosity>false</LimitStateMessageVerbosity><StateMessageVerbosity>10</StateMessageVerbosity><AllowWUMU>true</AllowWUMU><AllowUseMeteredNetwork>true</AllowUseMeteredNetwork></DeploymentCreationActionXML>
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Rule XML is: <AutoDeploymentRule xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DeploymentName>Test ADR</DeploymentName><DeploymentDescription>Test ADR</DeploymentDescription><LocaleId>1033</LocaleId><UseSameDeployment>false</UseSameDeployment><EnableAfterCreate>true</EnableAfterCreate><NoEULAUpdates>false</NoEULAUpdates><AlignWithSyncSchedule>false</AlignWithSyncSchedule><ScopeIDs><ScopeID>SMS00UNA</ScopeID></ScopeIDs></AutoDeploymentRule>
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Criteria Filter Result XML is: <AutoDeploymentRule xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DeploymentName>Test ADR</DeploymentName><DeploymentDescription>Test
ADR</DeploymentDescription><LocaleId>1033</LocaleId><UseSameDeployment>false</UseSameDeployment><EnableAfterCreate>true</EnableAfterCreate><NoEULAUpdates>false</NoEULAUpdates><AlignWithSyncSchedule>false</AlignWithSyncSchedule><ScopeIDs><ScopeID>SMS00UNA</ScopeID></ScopeIDs></AutoDeploymentRule>
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Parsing Deployment Action XML...
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Parsing Rule XML... SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Could not find element DeploymentId SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Could not find element UpdateGroupId SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Could not find element UpdateGroupName SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
SQL is: select cis.CI_ID from vCI_ConfigurationItems cis join vProvisionedCIs pci on cis.CI_ID = pci.CI_ID where cis.CI_ID in (16793068, 16793070, 16793441, 16793445, 16793531, 16793686, 16793688, 16794597, 16794600, 16794602, 16794604, 16795443,
16795445, 16795709, 16795711, 16796210, 16796222, 16796292, 16796298, 16799495, 16799503, 16799602, 16799700, 16799703, 16799705, 16799712, 16799718, 16800300, 16800302, 16800367, 16800369, 16800371, 16800375, 16801224, 16801227, 16801237, 16801239, 16801287,
16801289, 16801559, 16801566, 16801996, 16802034, 16802839, 16802841, 16803306, 16803310, 16803420, 16803422, 16806477, 16806479, 16809354, 16809360, 16809393, 16809397, 16809774, 16809786, 16809792, 16813338, 16813348, 16813636, 16813638, 16814948, 16814950,
16815151, 16815153, 16817088, 16817102, 16817108, 16817398, 16817400, 16818677, 16818691, 16825397, 16840448, 16840458, 16840460, 16840462, 16840690, 16840700, 16840702, 16840710, 16840824, 16840826, 16842640, 16842641, 16842802, 16842803, 16842841, 16842870,
16842871, 16842896, 16842917, 16843017, 16843042, 16843049, 16843051, 16845981, 16846404, 16846751, 16846757, 16848017, 16848021, 16848664, 16848687, 16849383, 16849385, 16852506, 16852514, 16852516, 16855484, 16857102, 16857151, 16857152, 16857255) order
by cis.CI_ID SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
0 of 115 updates are downloaded and will be added to the Deployment.
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
The rule resulted in no updates being found. Skip deployment creation or update...
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
CRuleHandler: Enforcing Actions for Rule 16777228 failed!
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
CRuleHandler: ResetRulesAndCleanUp() SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Updated Failure Information for Rule: 16777228
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
CRuleHandler: Deleting Rule 16777228 SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Found notification file C:\Program Files\Microsoft Configuration Manager\inboxes\RuleEngine.box\16777228.RUL
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5148 (0x141C)
RuleSchedulerThred: Change in Rules Object Signalled.
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
Refreshed ScheduleList instance for Rule (16777228) from schedule string () with next occurence (12/31/1969 7:00:00 PM)
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
FindNextEventTime found next event for RuleID 0 as :1/1/2038 12:00:00 AM
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
RuleEngine: Got next rule execution time successfully. Next event is in 12369097 minutes
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
Sleeping for 15 minutes SMS_RULE_ENGINE
6/26/2014 9:22:10 AM 5228 (0x146C)
Also, I do not have a patchdownloader.log anywhere, Ive checked all aforementioned locations from various sources and it just simply does not exist on my SCCM server. Here is my setup:
Server1: Primary server with all roles installed locally except the site database is on its own server. WSUS is installed locally here and DB is stored here.
Server2: SQL DB for Primary site DB
Server3: Secondary remote site running MP, DP, SUP. DB is SQL Express local.
So the SUP role was installed successfully on both server1 first and server 2 second with the site servers accounts. The SUP Synchronizes successfully and I can see a large list of updates available for use but not downloaded of course. I have set WSUS option
to store updates locally and have plenty of space at the target destination.
So here is my issue, I have been working on this issue for the better part of a week and understand the error code from the ruleengine.log to be a permissions issue. I have also proved this out but creating a test ADR with minimal updates and applied NTFS perms
to the target path for Modify with the everyone group (testing purposes only). The updates downloaded successfully. So this puts me right back to where I was, knowing its a permissions issue but not understanding what permissions are needed. Let me explain
further.
The best way to start is to show what perms I have to the target location for downloads/wsus/sup anything:
Path: \\Server1\UpdatesAndDefinitions (permissions being applied to the UpdatesAndDefinitions root folder)
SCCMAdmin (account used for most SCCM tasks except for NA) / Modify / Share and NTFS
Server1$ (primary site server) / Modify / NTFS
Everyone / read and execute / NTFS and Share
There are other system generated perms but the above three are the important ones. So hence my confusion I know that the SCCMAdmin account or the Server its self has to be accessing the target directory so why is it failing with a permissions issue?
My next step was to enable Auditing on the target path. Doing so revealed just what I thought and through me into further frustration:
A network share object was accessed.
Subject:
Security ID:
SYSTEM
Account Name:
SCCM-MPS$
Account Domain:
DSCI
Logon ID:
0x3e7
Network Information:
Source Address:
fe80::306a:8827:8672:3ba5
Source Port:
50329
Share Name: \\*\UpdatesAndDefinitions
A handle to an object was requested.
Subject:
Security ID:
DSCI\sccmadmin
Account Name:
sccmadmin
Account Domain:
DSCI
Logon ID:
0xad903c
Object:
Object Server:
Security
Object Type:
File
Object Name:
F:\UpdatesAndDefinitions
Handle ID:
0xf5c
Process Information:
Process ID:
0x10cc
Process Name:
C:\Windows\explorer.exe
Access Request Information:
Transaction ID:
{00000000-0000-0000-0000-000000000000}
Accesses:
READ_CONTROL
ReadAttributes
Access Mask:
0x20080
Privileges Used for Access Check:
Restricted SID Count:
0
Now I may not be the best I traversing through the mess of audit entry's and translating them, but from what I can see the two accounts that have the proper share and ntsf perms ive listed above are indeed the ones accessing the target location and the audit
code is success. I filter for failures and found no audits for failures whatsoever yet my downloads still fail religiously, unless of course I open myself up with the everyone group.
So next... I tried adding in the Network Service account with proper permissions, the Local Service Account, my user account, and all no go's.
Next... I remove the SUP roles from SCCM checked the logs for deinstall confirmations, and reinstalled these roles. No Go!
If anyone can assist I would be in your debt and very grateful.
Oh last note, but very important note I'm running SCCM 2012 SP1 CU4
Thanks,
Michael
MichaelSpauldingI just tested with the everyone group further; I added everyone with modify for ntfs and just read only for share and downloads failed!
I then changed the share perms for everyone to change and the ntfs to read/execute and poof downloads complete! Obviously change share perms for everyone leaves me open which Id like to prevent, so finding what account is being used is crucial.
I have already tried adding all of the SCCM accounts I use and the servers themselves as change perms to share and ntfs and have not had any luck.
MichaelSpaulding -
Top 15 Issues/Fixes Needed in the next Premiere Pro release/update (CS6.5 or CS7)
I’m excited for what’s coming next in Premiere Pro CS6.5 or CS7 (whichever update is next). As a former FCP7 user myself, Premiere CS6 was a quick and necessary switch (especially after changing the main keyboard shortcuts back to what I was used to). I’ve since gone back to FCP7 on occasion for certain things and I can tell you that I’m so glad I’ve switched. For all the headaches and serious errors that I still get daily/weekly with Premiere Pro CS6, it’s still definitely a big step up. I'm encouraged by staff members like Mitch W. that have expressed confidence that many of these issues will be resolved in the next release. Here is my personal list of “Top 15 issues/fixes” needed in the current Premiere Pro CS6…
(Adobe STAFF...feel free to print this out and hand it to the engineers responsible for making changes )
1) The infamous multicam FLAW. Needing no introduction…when you are editing your video in the multicam window and you hit pause or stop Premiere has decided that’s a great time to make a cut on your timeline and also switch angles back to the original angle whether you like it or not. You cannot stop ever while editing multicam without Premiere making these unwanted cuts and angle changes. Awful. Multicam in PPro is otherwise pretty nice, but this issue is terribly counter-productive especially when you are editing longer complex multicam sequences. Imagine if every time you hit pause or stop in the regular timeline it made a cut there and switched clips. Ugh. You get my point.
2) The audio meters/levels do not work while in the multicam window. A staff member in the forums (I think it was you) said this was a bug. Hope it will get fixed. The audio levels work in every other window and its essential to be able to keep an eye on the levels while editing multicam.
3) Ticktime.cpp-207 error. Ugh. What a nightmare. I have confidence that it will be fixed soon. Mitch W. from the forums is my new hero for taking on this error. How to replicate it?…simply have 6 (or 7) or more clips with the warp stabilizer effect added on the same timeline as a nested multicam clip and you get this error upon reopening your project. The more warp stabilizers you use, the more times you’ll have to hit “continue” to get through the error before you can open your project or export it to AME. I deal with this every single day because all my projects use these two elements. Most of my projects I have to hit “continue” on the error message upwards of 350-450 times to open my projects. Gets old fast.
4) Icon View order control. When you display all your clips in icon view instead of a list view (In the project window), there is no metadata to allow you to put the clips in order somehow (or at least maintain the order that you have in the list). There are roundabout workarounds, but c’mon.
5) Warp Stabilizer fixes…it is an AMAZING tool (far, far, far better than smoothcam in FCP7) BUT…it has it’s issues. Since I use hundreds of times/week (no exaggeration) I know it’s functions/flaws really well. The issues with Warp Stabilizer:
a) #3 above
b) Toggle OFF the effect after it’s applied and then hit Analyze again and PPro crashes. (easy to avoid but annoying bug)
c) If a clip is in the middle of stabilizing (not just analyzing…but the final step labeled “analyzing”) when Auto-save comes up…most of the time PPro freezes and crashes.
d) The DEFAULT “method” (in the settings for Warp Stabilizer) should NOT be “Subspace Warp”…it should be “Position, Scale, Rotation”. Why? It’s FAAAAARRRR better and more efficient. 95 out of 100 times it causes MUCH less “wobble” in the final stabilized clips AND most importantly 95 out of 100 times it scales the video less. Way better method.
6) The ability to open multiple projects simultaneously. As simple as FCP7 had it…or even better…as cool and efficient as FCPX does it would be nice.
7) The ability to mark a clip and not just a point on a timeline (because if you move the clip, the marker doesn’t go with it). I know you can use “Clip Marker” but it's very limiting, can't be moved, can't add notes, can't advance to the next marker (as far as I know). Also a marker list like FCPX has would be nice so you can see your markers all in a list at a glance and adjust them as needed.
8) Ability to select a clip in the Project window and find out where it’s used in the timeline. I LOVE how you can do the reverse and take a clip in the timeline and “Reveal in Project Window” but it would really help to go the other way around. Dealing with several hundred clips for every project I’ve missed this feature from time to time (FCPX handles this really well).
9) Add a through-edit indicator in timeline and “re-join clips” option. If you cut a clip but keep both clips together it’s just one continuous clip. But I really hope Premiere adds the not only an indicator of some sort (like FCP7′s way of having two small red triangles facing each other on that cut) so you know it’s one continuous clip BUT ALSO the ability to right-click and “re-join” the two clips into one.
10) When clip is double-clicked in timeline, CTI position in source viewer should match location in timeline. This one is pretty annoying and a fix would be incredibly helpful. The way it is now is very counter-productive. Definitely hope this gets fixed ASAP.
11) Better border controls for images/videos. Can’t do much with images right now in PPro. At least allow to customize the color and size/strength of it’s borders and shadows.
12) Better support for Mac/Apple's top end computers/GPU's. I'm still surprised that 2011 top of the line iMac cards (AMD 6970M) that have 2gb of ram are not supported. I’m sure/I hope 2012 iMac’s will be supported with their new Nvidia GPU’s…but I’ll hold out hope that the top iMac (up until 3 months ago) is supported at least at it’s full power. All around better Mac support would be great considering the wave of new users coming over from FCP.
13) Opacity/Transparency issues with EXPORTED videos with Cross Dissolves, etc. For some odd reason videos exported from Premiere CS6 have issues with cross dissolves or minor transparency. I’ll try to explain…in the program window of PPro CS6 cross dissolves look fine. Also, if you take a clip and stack it on top of another clip and put the top clip at say 99% opacity instead of 100 it looks like it should in PPro. But, if you export the clips you’ll quickly see that there are issues. It’s almost like the exported videos dissolve from 5 to 95. They skip the subtle beginning (0-5%) and subtle end (95-100%) of any fade. A clip in PPro as described above that is on top of another but set at 99% will look more like 90-95% in the exported file ESPECIALLY if the two clips are contrasting (eg. top layer dark, bottom layer with bright elements). It’s like the opposit of ease-in/ease-out. I have to ease-in/ease-out of every dissolve to avoid this issue…and even then, it’s not THAT much of an “ease” as one would hope. Another user in a forum once posted a video that shows how abruptly exported videos end their transparency changes…see: THIS SAMPLE VIDEO Perhaps this is a GPU/processing issue with AME vs. Premiere Pro but whatever it is, it should be fixed so videos you export look like the videos you edited!
14) Better control in Creative Cloud over which devices are “activated/deactivated” We have 3 computers and it would be nice if one could log in to their Creative Cloud account and see a list of which devices they have and just toggle on/off which one’s are activated/deactivated. This is especially helpful when you are mobile and forget to deactivate one of your two home/office devices so you’re stuck now until you get back to the home/office to deactivate it. This is not a Premiere thing, but just a general wish.
15) Ability to sync multicam clips automatically using the audio. Plural eyes apparently does this well. Would be nice to have it built into Premiere like FCPX does. Select all the shots you want to sync, One button click, wait a few seconds, done.
That’s my top 15. Everything else is awesome in my opinion for what I do 10 hours a day 6-7 days a week. I’ve included bug reports/feature requests for all of these at one point but if you are someone else reading this go to the following link and ask for these issues to be fixed: FEATURE REQUEST/BUG REPORT
I wish Adobe did smaller updates more often. Because even if they were smaller updates, we’d at least know you are working on fixing some of these issues that have plagued this NLE for years. Holding off fixes for one or two big “updates” every year is tough to deal with in a world of the ever updating apps we live and play with daily on our phones. I realize Premiere is a much larger scale and far more professional than a phone app, but hopefully you get my point. Here’s to hoping the next release (NAB 2013?) resolves all my top 15 issues. Here’s to hoping that these issues will be resolved sooner than later so I can stop raising hell in various forums. I’m honestly ready to start praising and defending Premiere Pro instead of griping about it’s bugs and flaws. It’s a fantastic program “on the way” to being the best. I hope.Nice list, however it does seem a little bit like you may be hoping that Adobe provides the Final Cut 8 package that Apple never delivered on. Having edited primarily with P-Pro for the last decade, I hope Adobe focuses more on getting the next release to run as smooth as CS5x does, strangling and crucifying all the codec and playback bugs that arose in CS6. To me, it appeared that too many of the changes in CS6 were semantic or cosmetic, meant to give a FCP user more familiarity. Why change the name of an edit function from "overlay" to "overwrite" after 15 years? Because it enhances the product, or because that is what Apple called the function in FCP? If Adobe renames the Program Monitor to the "Canvas" with the next release, I think that I might be sick. There were nice additions to the Creative Suite as a whole, but I hope the next Premiere release reverses some missteps made in CS6, and focuses more on stability and enhanced functionality. I also really hope that they have an open ear towards criticism; Apple did not and their users ended up with FCP-X
It saddens me that the fixes I want most in a future release were purposeful changes between CS5x and CS6x.
1) Provide the options for transport controls in the source and program monitors. All of the users at my office hate that the jog and shuttle were removed in CS6. JKL was an option prior to CS6 and if we liked it we would have used it. I keep reading the justification that this change was meant to save space and streamline the UI. I can't express cordially how much this bothers me to look at the empty wasted space in my CS6 UI where the transport controls should be. The experiment has gone on long enough.
2) Restore the 3 Way Color Corrector to its previous functionality. The 3 way color corrector has been effectively neutered in CS6. Where in CS5x and earlier releases one could separately target the input/output levels of Highlights, Midtones, and Shadows, CS6 has only a master input/output level control. Why is less control better? Is it a 3-Way Color Corrector or a 1-Way Color Corrector?
3) Restore Clip and Timeline markers to their previous functionality. I don't even.... I can't. A user shouldn't have to do work arounds to create a modicum of functionality. This again was an attribute that wasn't broken in earlier releases.
4) Simplify the the task of pasting media into a targeted track. As it is now, pasted items will always go to the lowest activated track instead of the targeted track.
Lastly I would like the Adobe Premiere teams to consider what an amazing accomplishment Premiere CS5x was. Upon CS5's release, a good portion of competitor's workflows became obsolete. CS5.5 refined, stabilized, and expanded functionality.
CS6 changed the UI around, moving or deleting buttons, changed keyboard shortcuts, and renamed functions. Oh, and added hoverscrub, you know...like FCPX. In exchanged there was loss of functionality, stability issues and broken codecs.
I really hope the next release is more like CS5x and less like FCPX
Maybe you are looking for
-
HT4914 What about duplicates that are in my iTunes library
I have loads of duplicates it would take forever to trawl through my library to delete manually
-
HT5313 How can I check if my iMac has this update? OS X Lion v10.7.5 Update
How can I check if my iMac has this update? OS X Lion v10.7.5 Update
-
Seems Sprint has released 10.2.1.2674 Software release with 2758 OS and 2759 Radio. Come on Verizon Wireless, how about jumping on the bandwagon. Upgrades are always welcome.
-
Self-Diagnosis: Automatic generation of the Include is inactive
Hi, in transaction DSWP > Solution > Self Diagnosis I get warning "Automatic generation of the Include is inactive". Do you have any idea to solve this problem and get it green? Best regards, Andy
-
Illustrator 16 and File Server
Dear All, All my files are on XServe 10.7.5, and I have 6 MacPro 2009 on a 1000BT network (2 GB on the server) 3 MacPros Under 10.6.8 and 3 MacPros under 10.7.5. I have the following problem: With CS6: - on a MacPro 10.6.8, I work on a file, make cha