The method ImportPicture fails in a deployment server
Hello
This is my code to import a picture
Public Shared Sub InsertarLogoCabecera(ByRef objReportDocument As ReportDocument, ByVal sPathLogo As String)
Dim objReportClientDocument As CrystalDecisions.ReportAppServer.ClientDoc.ISCDReportClientDocument
Dim objSection As CrystalDecisions.ReportAppServer.ReportDefModel.Section
Dim objImage As CrystalDecisions.ReportAppServer.ReportDefModel.PictureObject
Try
objReportClientDocument = objReportDocument.ReportClientDocument
objSection = objReportClientDocument.ReportDefController.ReportDefinition.PageHeaderArea.Sections(0)
objImage = objReportClientDocument.ReportDefController.ReportObjectController.ImportPicture(sPathLogo, objSection, 50, 50)
Catch ex As Exception
Utils.ErrorLog.RegistraError(ex, Utils.ErrorLog.ErrorGenerico.Interfaz, Nothing, 20000)
End Try
End Sub
End Class
In my computer everything is working ok but when the solution is published in other computer the next exception happens:
Mensaje:
Not implemented.
Error en archivo temp_d36c7f36-3688-4cee-9bfe-c143d768bff6 {DB92430B-0275-4805-8F50-FB29849B7C26}.rpt:
The operation is not yet implemented
Stack trace:
en CrystalDecisions.ReportAppServer.Controllers.ReportObjectControllerClass.ImportPicture(String filePath, Section Section, Int32 left, Int32 top)
en MyApplication.Web.Utils.Informes.InsertarLogoCabecera(ReportDocument& objReportDocument, String sPathLogo) en
source:
rptcontrollers.dll
There is no way to attach files. Typically sharing of files is reserved to phone cases only. See the Blog [What are these "support" forums good for anyhow?|/people/ludek.uher/blog/2011/04/07/what-are-these-support-forums-good-for-anyhow].
Does the other file work in the CR designer?
BTW.; phone cases can be created here:
http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100?resid=S6I@hgoHAkEAAGsiyVkAAAAR&rests=1282226845369
- Ludek
Similar Messages
-
I keep getting this message when I try to upload a folio "The upload has failed. An unknown server error occurred during processing. Please try again". It happens every time, some articles do upload but some not.
Thanks Automator21 I manage to upload most of my articles successfully by starting again the whole process. But I have 4 articles that I can't upload, all of this articles have big size videos (one 50mb, other one with 70mb, other with 4 small 30mb videos). I could upload those articles by taking the videos out, but I want those videos on my articles.
I use Adobe Media Encoder to compress the videos and they are not in high quality, for example the 70mb file is an 640x480 8 min. long video. And they are all with H.264 encoding and .mp4.
Do you know how can I fix this problem.
Thanks! -
Want to stream Netflix to blueray player via my existing Airport Express wifi. The player finds my wifi but the wireless connection fails - says, " Ensure DHCP server is enabled on router and restart router." I don't think I have a DHCP server. Suggestions anyone?
I can't speak specifically regarding LG, but the Whole Home feature on Direct TV (record a movie on one DVR and watch it on another TV in another location) just won't work with wireless, and I have a strong fast connection at 300 Mbps. Ethernet works perfectly.
Few audio/video products will accept "n" wireless at 5 GHz. I suspect that your LG accepts a 2.4 GHz signal, which would top out at 130 Mpbs.
If you are trying to stream High Definition video, especially at 1080P, my opinion would be that it is unlikely that you will be able to do so reliably using wireless.
Perhaps another user who has figured out how to do this will post with some input. -
The unattended installation failed while installing SQL Server 2008 R2 ????
Hi gurus,
I got an error while installing SQL Server 2008 R2 in Windows 2008 R2 standard 64 bit operating system.
LOG file*
Customized installation of SQL Server 2008R2 for SAP *
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlWriter_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_tools_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_tools_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
MSI error description:
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_tools_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
MSI error description:
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_tools_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Client Tools SDK
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_tools_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_tools_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
MSI error description:
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_tools_Cpu64_1.log
MSI error description:
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SystemConfigurationCheck_Report.htm
1/16/2012 10:13:34 PM
Message Box "Installation failed"
The unattended installation failed.
Installation Step: The unattended installation failed.
Return Code: -2068052377
Log File: C:\Windows\SQL4SAP.log
Check the log file above.
See SAP note 1144459 for known issues.
Result: vbOK
Registry settings (2/2):
HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\{3d06c673-5e8a-41c0-b47f-3c3ca0a22e67}
WRITE(REG_DWORD): 4
HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\{2b9034f3-b661-4d36-a5ef-60ab5a711ace}
WRITE(REG_DWORD): 4
1/16/2012 10:37:32 PM
Quit script with return code 1
Please help me out with this issue.
REGARDS,
RajHello Raj,
MS SQL DB installation specific steps for SAP system is clearly documented in SAP Installation guide. Please download from SMP, read it carefully and install as mentioned in the guide.
Hope it helps.
Thanks,
Siva Kumar -
How to solve the "Method invocation failed" error in script?
Hello,
I'm trying to modify the script that enumerates all the txt (csv) files on folder and deletes empty columns, but with no luck. The script is working when I execute it on single csv file. But when I put script on loop, it generates errors:
Method invocation failed because [System.Management.Automation.PSCustomObject] does not contain a method named 'split'.
At C:\scripts\populate.ps1:25 char:1
+ $b = $line.split(",")
+ ~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (split:String) [], RuntimeException
+ FullyQualifiedErrorId : MethodNotFound
The script looks the following:
$files = Get-ChildItem C:\scripts\Results\csv\* -include *.txt
#Process files by performing a search and replace
foreach ($infile in $files)
$infilen = 'C:\scripts\Results\csv\'+[io.path]::GetFileName($infile)
$infile = import-csv $infilen
##remove blank coloumns##
$cStore = @() # array to store used column numbers
$rNumber = 0
foreach ($line in $infile)
if ($rNumber -eq 0)
{# ignore header
else
$b = $line.split(",")
$fieldNum = 0
foreach ($field in $b)
if ($field -ne '')
if ($cStore -notcontains $fieldNum) {$cStore += $fieldNum}
$fieldNum += 1
$rNumber +=1
# array $cStore now contains column numbers with values
$cStore = $cStore | sort
foreach ($line in $infile)
$nLine = ""
$c = $line.split(",")
foreach ($ar in $cStore)
$nLine += $c[$ar]+","
# remove trailing ,
$nLine = $nLine.Substring(0, $nLine.Length-1)
$fnFriendly = [io.path]::GetFileNameWithoutExtension($infile)
$result=$fnFriendly+'cl.txt'
Write-Output $nLine >> $result
Also I have found the explanation on this error on this
link but it seems this is not the case. Can you help to solve this?
Thanks!You are importing a CSV file which implies that you are creating an object (pscustomobject) and each item in that object is represented by $line. The issue is that this $line has multiple properties (for each column of the CSV) that you need to decide
on which one to split:
$c = $line.propertyname.split(",")
I'm not sure, but it seems that if you are trying to split by a comma, then maybe you are assuming that you did something similar to a
get-content on the file in which the original approach that you have done would work.
Boe Prox
Blog |
Twitter
PoshWSUS |
PoshPAIG | PoshChat |
PoshEventUI
PowerShell Deep Dives Book -
When I install Flash Professional CC 2014, I got the Error:
Exit Code: 16 Please see specific errors below for troubleshooting.
For example, ERROR: DW039 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s)
ERROR: DW039: Failed to load deployment FileThe solution mentioned above doesn't work for me.
Change language, restart Macbook, error again, change language back and forth, restart every time, it just doesn't work.
I was installing same app - Flash Professional CC 2014.
I got the same error
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s)
ERROR: DW039: Failed to load deployment File
So, same problem, same question. -
NWDI for the 04s preview fails with 'SLD name-server configuration error'
After the installation, everything seems to work fine except that when I go to CMS, the links on the top seems to be hardcoded to point to http://pwdf3102:50100/dtr, even in the Domain Data. When I tried to change it to my local server, it keeps complaining about "Unexpected error; inform your system administrator: <Localization failed: ResourceBundle='com.sap.cms.util.exception.CMSExceptionMessages', ID='SLD name-server configuration error', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key SLD name-server configuration error"
Any suggestions on how to work around this? Thanks.Brian,
Try to import the model file first by going to SLD->Administration->Import CIM Model. If the problem sticks, then try to remove the systems. The preview version has lots of pre-exist system name in the technical system, which you can find giving errors since they're not reachable. So you can remove them from SLD (Home->Technical Systems) if they are preventing you from procceeding.
You need to go to http://server:port/dtr/system-tools/administration/NameServerConfiguration to update the name server as well.
Hope this helps...
Message was edited by: Yujian Yan -
Re: Failed to Start Deployment Server -- X Window DISPLAY variable not set
I don't know how you have hit that in an normal environment:-( Can you describe what you did? As long as you start the bundled AppServer in the same environment as Creator, both need the DISPLAY set.
A guess, did you try to install Creator as root and then use it as normal user? Don't do that. Creator is intended to be installed by the user who will use it!
I know our updated JDK now throws different exceptions when the DISPLAY variable is not set than the one before. I found that (but too late for the release) and have the needed change. But so far I was not aware that any customer had actually hit that. So it was not considered a high enough priority to go into a hotfix. I'll file a CR and the fix will hopefully make it into a patch.
As a short term workaround for that problem (But I still believe your setup has other problems):
Go into <Creator_home>/SunAppServer8/lib/ and replace processLauncher.xml with the backup (processLauncher.xml.bak).
The only thing you will loose, is the little icon in the Gnome/KDE/SystemTray.
I hope this helps,
Thanks,
-- MarcoI don't know how you have hit that in an normal environment:-( Can you describe what you did? As long as you start the bundled AppServer in the same environment as Creator, both need the DISPLAY set.
A guess, did you try to install Creator as root and then use it as normal user? Don't do that. Creator is intended to be installed by the user who will use it!
I know our updated JDK now throws different exceptions when the DISPLAY variable is not set than the one before. I found that (but too late for the release) and have the needed change. But so far I was not aware that any customer had actually hit that. So it was not considered a high enough priority to go into a hotfix. I'll file a CR and the fix will hopefully make it into a patch.
As a short term workaround for that problem (But I still believe your setup has other problems):
Go into <Creator_home>/SunAppServer8/lib/ and replace processLauncher.xml with the backup (processLauncher.xml.bak).
The only thing you will loose, is the little icon in the Gnome/KDE/SystemTray.
I hope this helps,
Thanks,
-- Marco -
Failed to unlock deployment list
Hi guys!
I need help because when I run a workflow that call several mappings, it stops in the middle of one of the mappings, looks like it ended up successfully (all green, 0 errors in the log). I have no log file in the $OWB_HOME/owb/log folder, and the only error message I can find is in the xterm where I launched OWB client :
doAsynchronousExecution
Task notification null PRC_DMT_MAIN
Execute operation NativeExecution OWF_BIDEALERS_LOCATION PRC_DMT_MAIN
Task notification null PRC_DMT_MAIN:MPG_DIM_SOCIETE_SITE_MARQUE
Task notification OK PRC_DMT_MAIN
Execute operation NativeExecution OWF_BIDEALERS_LOCATION PRC_DMT_MAIN
Task notification OK PRC_DMT_MAIN:MPG_DIM_DMT_TEMPS
Task notification OK PRC_DMT_MAIN:MPG_DIM_SOCIETE_SITE_MARQUE
Task notification OK PRC_DMT_MAIN:MPG_DIM_DMT_TEMPS
Failed to unlock deployment list
Failed to unlock deployment list
PRC_DMT_MAIN is my workflow, and all the MPG are the mappings is calls. Several are missing.
A bit more about the context :
- we have a dev. environment running on windows server and everything is fine,
- we have a test environment running on linux SLES where I have this issue,
- we have written an OMB*Plus script to perform the erport/import/deployment and it has run perfectly so far,
- we already have been through the OS-specific problems (folder separator, case sensitiveness, ...)
I googled the error message "Failed to unlock deployment list" but didn't get anything helpful.
Can anybody please advise?
Thanks in advance!
Ced.Nigel,
My fault, on the log : I renamed the log file, expecting OWB to create a new one but everything was actually logged in the renamed file.
My client is working on the server. I use putty and XMing to get it displayed on my PC.
I did not try with today delta load, but with the Monday full load, to run each part separately. It allowed me to complete the process. Thus it's not the workflow contents that fails.
One weird thing is in the log file today. I have to explain a bit more:
Both full and delta workflow contain 1 workflow for each layer (ODS, DWH, DMT) the difference is the DWH workflow that is not exactly the same. The two DWH workflows and the DMT workflow all call some mappings and also call a set of workflows.
The strange thing is that the delta didn't reach the end of the ODS. The DWH and DMT weren't even started. But the log file reports a start of the DMT workflow called by the delta workflow at the same time as the ODS. The DWH isn't started, while the main workflow sequentially calls ODS, DWH and then DMT.
The funny thing is that the DMT seems to run ( while it is not supposed to ) and to stop at the same place as in the full : I have a log for the same 2 DMT mappings.
I believe that there is something somewhere that remains from former executions and that is re-executed for some reason.
I also think that if my delta stops, it is not due to the ODS, but due to the fact that this ghost DMT session that runs in parallel says "stop" to the whole process while the ODS is running.
2008/07/02-15:15:19-CEST 1DE0C09 Initializing execution for auditId= 227186 parentAuditId= 227181 topLevelAuditId=227181 taskName=PRC_SCH_DELTA:PRC_ODS_MAIN
2008/07/02-15:15:19-CEST 1F2F70A Initializing execution for auditId= 227205 parentAuditId= 227181 topLevelAuditId=227181 taskName=PRC_SCH_DELTA:PRC_DMT_MAIN
Finally, I think that the issue isn't in the workflows themselves as the same issue happens on 2 different workflows.
Can you please advise?
Thanks for your help so far!
Ced.
Unfortunately I can't go any further : -
Hyperion Financial Reporting Studio "Failed to Connect to Server"
One of my report developers recently got a new laptop. Since then, she hasn't been able to open an existing report or create a new one. She can log into Financial Reporting Studio, but when trying to open an existing report or create a new report, she gets the error message "Failed to Connect to Server".
We've tested using her laptop and using mine. We are both fine on my laptop. We both have same issue on her laptop. Therefore, we don't think it's a security/credentials issue.
We've searched help documentation and other threads in this forum but haven't been able to find what we need.
We suspect that file(s) are missing or something wasn't configured properly during the new install. Maybe the Planning ADM Driver?? Our company's tech support hasn't been able to help. This is a new implementation, the consultants are gone, and our IT staff isn't up to speed yet.
Can anyone offer help as to what file/configuration could be the cause and exactly how to correct?
Thanks.We had the same issue after installing the Financial Reporting Studio client.
If you run the batch script HRRunAnt.cmd in the directory C:\Hyperion\products\biplus\install\bin after installation this fixes the problem. -
Having trouble downloading app: ERROR: DW039: Failed to load deployment File
I am trying to download Flash Professional CC that I purchased through creative cloud, vut constantly having error (ERROR: DW039: Failed to load deployment File).
Please help!Hi ji-wonwoo,
Please refer : When I install Flash Professional CC 2014, I got the Error: DW039: Failed to load deployment File
Thanks,
Atul Saini -
The server cannot find the method in the deployed custom DSC
Hi everybody,
I encountered a problem these days and I don't know how to solve it.
Here is the detail information about it.
I create a java project and export it as a runnable jar file as usual. Then, I deployed it in the component. In the server log, it said that "Method not found for service descriptor".
However, I can still find the service in the "Service Management" and access the WSDL of the SOAP endpoint.
Everytime when I try to invoke it, there is an error message showing that: the method doesn't exist.
Does anybody have some ideas about this phenomenon? I really don't know what happened.
Thanks in advance!Hi Hodmi,
Thank you for your reply.
I have figured it out. It because the type of the input parameter is not consistent with that in the component.xml.
Thank you again. -
Hello,
1) I am suddenly getting an error message ‘Load Report failed’ in a production server (where the VS2003 application is deployed) when the Crystal Report is executed. This has happened maybe because of the Windows/Crystal Report Updates!
I am able to see the same report perfectly fine in the development computer using VS 2003.
I am using the 9.1 version which is part of the Visual Studio 2003.
The event logs show 'Either the keycode library is not registered or it cannot be loaded ...EventID=10029'. See attached screen shot.
Please help?
2) Since I was getting a registration suggestion window for using Crystal Reports, I registered twice using different email address and it said that it will send me the KeyCode for the Crystal report but after successful registration I never got any keycode but just an email acknowledging the Registration.
I believe the KeyCode is required to use it in the server to execute/run a report.
Can SAP representative email the keycode to my gmail account?
My product key is:
Please help to resolve both my problems
Thanks in advance,
Sanjay ChudasamaIf I memory servers, you have to open the Crystal_Regwiz2003.msm in the .NET deployment project. One of the properties of the msm was Keycode (or similar). You entered the keycode here. To find your keycode; in VS2003 IDE, go to the Help | About screen. You will see one of the installed components as Crystal Reports and the keycode will be on the right of that. Copy the keycode from here, paste in the above.
For more details see the article Crystal Reports and Visual Studio .NET - Application Deployment.
- Ludek
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Share Your Knowledge in SCN Topic Spaces -
Hello,
I have configured BizTalk Services Hybrid Connection between Standard Azure Website and SQL Server 2014 on premise.
Azure Management portal shows the status of Hybrid Connection as established.
However, the website throws an error when trying to open a connection
<
addname="DefaultConnection"
connectionString="Data
Source=machine name;initial catalog=AdventureWorks2012;Uid=demouser;Password=[my password];MultipleActiveResultSets=True"
providerName="System.Data.SqlClient"
/>
(The same website, with the same connection string deployed on SQL Server machine works correctly).
I tried various options with the connections sting (IP address instead of machine name, Trusted_Connection=False, Encrypt=False, etc. the result is the same
[Win32Exception (0x80004005): The certificate chain was issued by an authority that is not trusted]
[SqlException (0x80131904): A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.
I tried various machines - on premise and a clean Azure VM with SQL Server and it results in the same error - below full stack
The certificate chain was issued by an authority that is not trusted
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.ComponentModel.Win32Exception: The certificate chain was issued by an authority that is not trusted
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[Win32Exception (0x80004005): The certificate chain was issued by an authority that is not trusted]
[SqlException (0x80131904): A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) +5341687
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) +546
System.Data.SqlClient.TdsParserStateObject.SNIWritePacket(SNIHandle handle, SNIPacket packet, UInt32& sniError, Boolean canAccumulate, Boolean callerHasConnectionLock) +5348371
System.Data.SqlClient.TdsParserStateObject.WriteSni(Boolean canAccumulate) +91
System.Data.SqlClient.TdsParserStateObject.WritePacket(Byte flushMode, Boolean canAccumulate) +331
System.Data.SqlClient.TdsParser.TdsLogin(SqlLogin rec, FeatureExtension requestedFeatures, SessionData recoverySessionData) +2109
System.Data.SqlClient.SqlInternalConnectionTds.Login(ServerInfo server, TimeoutTimer timeout, String newPassword, SecureString newSecurePassword) +347
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover) +238
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer timeout) +892
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance) +311
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString userConnectionOptions, SessionData reconnectSessionData) +646
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions) +278
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool pool, DbConnection owningObject, DbConnectionOptions options, DbConnectionPoolKey poolKey, DbConnectionOptions userOptions) +38
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection) +732
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection) +85
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection) +1057
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection) +78
System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection) +196
System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) +146
System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) +16
System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry) +94
System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry) +110
System.Data.SqlClient.SqlConnection.Open() +96
System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) +44
[EntityException: The underlying provider failed on Open.]
System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) +203
System.Data.EntityClient.EntityConnection.Open() +104
System.Data.Objects.ObjectContext.EnsureConnection() +75
System.Data.Objects.ObjectQuery`1.GetResults(Nullable`1 forMergeOption) +41
System.Data.Objects.ObjectQuery`1.System.Collections.Generic.IEnumerable<T>.GetEnumerator() +36
System.Collections.Generic.List`1..ctor(IEnumerable`1 collection) +369
System.Linq.Enumerable.ToList(IEnumerable`1 source) +58
CloudShop.Services.ProductsRepository.GetProducts() +216
CloudShop.Controllers.HomeController.Search(String SearchCriteria) +81
CloudShop.Controllers.HomeController.Index() +1130
lambda_method(Closure , ControllerBase , Object[] ) +62
System.Web.Mvc.ActionMethodDispatcher.Execute(ControllerBase controller, Object[] parameters) +14
System.Web.Mvc.ReflectedActionDescriptor.Execute(ControllerContext controllerContext, IDictionary`2 parameters) +193
System.Web.Mvc.ControllerActionInvoker.InvokeActionMethod(ControllerContext controllerContext, ActionDescriptor actionDescriptor, IDictionary`2 parameters) +27
System.Web.Mvc.Async.<>c__DisplayClass42.<BeginInvokeSynchronousActionMethod>b__41() +28
System.Web.Mvc.Async.<>c__DisplayClass8`1.<BeginSynchronous>b__7(IAsyncResult _) +10
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeActionMethod(IAsyncResult asyncResult) +32
System.Web.Mvc.Async.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33() +58
System.Web.Mvc.Async.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49() +225
System.Web.Mvc.Async.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult) +10
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeActionMethodWithFilters(IAsyncResult asyncResult) +34
System.Web.Mvc.Async.<>c__DisplayClass2a.<BeginInvokeAction>b__20() +23
System.Web.Mvc.Async.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult) +99
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeAction(IAsyncResult asyncResult) +27
System.Web.Mvc.<>c__DisplayClass1d.<BeginExecuteCore>b__18(IAsyncResult asyncResult) +14
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult) +39
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.Controller.EndExecute(IAsyncResult asyncResult) +29
System.Web.Mvc.Controller.System.Web.Mvc.Async.IAsyncController.EndExecute(IAsyncResult asyncResult) +10
System.Web.Mvc.<>c__DisplayClass8.<BeginProcessRequest>b__3(IAsyncResult asyncResult) +25
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.MvcHandler.EndProcessRequest(IAsyncResult asyncResult) +31
System.Web.Mvc.MvcHandler.System.Web.IHttpAsyncHandler.EndProcessRequest(IAsyncResult result) +9
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +9651188
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.36213
Regards,
Michal
Michal MorciniecSame issue here, looking for more information !
-
Server failed to run - Reason:Server is not in the majority cluster partition
Hi,
my environment is Weblogic 12.1.2.
The deployment configuration is: cluster, 2 machines, 2 managed servers, 1 data source, and JMS (with uniform distributed queue).
When I'm starting the admin server + managed server on the first machine (using the node manager), while on the second machine the managed server and also the node manager are not running, the server failed to run and the error reason is : "Server is not in the majority cluster partition".
How can I enforce the server to run even if the second one is not running ? This scenario could occured because of some local problems on the second machine. My expectation is that after the second will running the whole cluster status will be good.
Thanks,
YaakovHi,
Just to remember the configuration: 2 managed servers configured as cluster that should be deployed on 2 different machine.
Following summary of the tests:
- node manager + admin server + 1 managed server running on the first machine --> server failed to init with error "Server is not in the majority cluster partition"
- node manager + admin server + 2 managed servers running on the one machine --> servers are running without errors
- node manager + admin server + 1 managed server running on the first machine / node manager runs on the second machine --> server on the first machine runs without errors without the famous error ' Server is not in the majority cluster partition'.
Bottom line, seems that if the node manager is not running on the remote machine, the cluster is not in a stable state and so the single managed server failed to initialize.
Is it according the documentation / expectations ?
Thanks,
Yaakov
Maybe you are looking for
-
APPLE: read this ...
hi apple, leopard is slow in starting and shuting down, admin gone twice (since yesterday evening), repair permissions does'nt work and so on .... are we your paying betatesters ????? i hope you solve the problems soonest ! regards, sascha
-
TS3988 I am trying to set up iCloud but I have spelled it wrong, what can I do?
Can you please help me - my e-mail is *****@btinternet.com but when setting up my iCloud account I have put *****@icloud.com I need to change my iCloud name <Email Edited by Host>
-
What's a good lightweight file manager for fluxbox?
I just installed arch and it's flippin awesome. I installed fluxbox because I prefer a light window manager with lots of functionality. When I used fluxbox with ubuntu I used thunar. But this time around since I'm using arch I want to use a file mana
-
O change from IE to Mozilla I meed to move my favorites to bookmarks. How?
how do Get the info in the favorites folder into the bookmark folder?
-
Will a Radeon 9600XT from a G5 DP 2.5GHz fit in a G4 450MHz 3,1
Dear All, I know this is rather a legacy question what with us being on the brink of Snow Leopard and Power PC being put out to pasture but I've managed to salvage an unloved G4 from the Office dead pile and get it running again. Here's the specs: Mo