The problem of the icons under the search bar

After upgraded to Yosemite, every time I search something on the search bar of safari , a group of icons still remain there after I pressed the 'Enter', how can I remove it?

CraigB wrote:
Could you explain the overall affect you are going for? Perhaps if we knew what you were trying to achieve we could offer potential solutions that don't involve using a Timer or perhaps a differnt way to use the Timer.
Craig...No.
In different tasks, different purpose of timer. Can I use the timer without jumps?

Similar Messages

  • Problem when I click the "browse to file" icon in the property inspector

    Please somebody help me. I am having a problem with Dreamweaver. When ever I click on the "browse to file" icon in the property inspector, it opens up a full size window on top of the Dreamweaver screen that can't be resize. This problem just started. I have shut down my entire system and restarted it and I am still having the problem. Can someone please help me. Thank-you

    When irregular things begin to happen in DW, it's usually caused by a corrupted cache file.  Below you'll find details on how to delete it.
    http://forums.adobe.com/thread/494811
    Nancy O.

  • Bought 4th Gen 3TB TC - streaming TV over the internet is now so slow and now is constantly buffering.  It seems the Airport Utility is always 'searching for new networks' - don't know if this is the problem.  It's not the internet speed as checked that.

    Bought 4th Gen 3TB TC - streaming TV over the internet is now so slow and now is constantly buffering.  It seems the Airport Utility is always 'searching for new networks' - don't know if this is the problem.  It's not the internet speed as checked that.  I took my old router upstairs and was streaming TV via my ipad seamlessly - the same program via the TC was constantly buffering.
    I just expected to be able to plug in the TC, so a simple set-up and experience wireless both upstairs and downstairs in my house.  For some reason the range is low and speed veru disappointing.
    I am far from being an IT expert but I would welcome advice about setting up this TC so we can enjoy the product as it was designed.  Please HELP!

    No silver bullet........but my suggestions may drive you in the right direction.
    1.  Unplug the power cable from the TC and wait 10-15 minutes before powering back up.   Seriously wait!
          Proceed to #2 if this dosen't help.
    2.  Unplug the power cable from the TC, ubplug the power cable from your Broadband Modem (assuming it's a cable modem), disconnect ethernet, and cable from modem. 
    2a.  Wait 10-15 minutes then re-connect cable, ethernet, and power back to modem (your modem should power up unless you have a power switch)  wait for all the modem lights to come on EXCEPT activity.
    2b.  Connect ethernet from modem to TC, and plug in the power cable to TC.
          Proceed to #3 if this dosen't help.
    3.  Reconfigure the TC.........Read here........http://support.apple.com/kb/HT3728
    All really simple to do....if you need additional help let me (us) know.

  • Re: Portege A100 - meaning of five icons under the Toshiba Logo

    I want to know what is the meaning of above five icon under the Toshiba Logo...
    Photo:
    http://i1.hk/d/attachments/day_100210/20100210_741cab47e44bf1501f7b4bQc5ay2xa3O.jpg
    Thanks for help

    hi desmondhk2002,
    it's nice that you uploaded a picture.
    unfortunally it's too big/or corrupted so that i cant see anything except a black stripe...
    i'll try it later again...
    oh btw: there came a manual with your machine - all informations are in that piece of paper!
    you can also download it from the toshiba website!
    okay this is now fully loaded
    and i am right: these answers *are in the manual*
    boot options! different devices to boot from.
    your first laptop/pc?...

  • Macbook Icon under the device column is gone.

    I accidentally poofed the Macbook icon under the device column, and I can't seem to find it. The Macbook also had "(2)" appended after it. Mine looked like this: "Zachary Lawrence's Macbook (2)"
    How do I get that appended (2) to go away, and how do I get the icon back into my side bar?

    -Click on the Finder icon in the dock.
    -From the menu bar, select Finder->Preferences
    -In the toolbar, click on the Sidebar tab.
    -Check the box for "Hard Drives" under devices.

  • I have a macbook pro core i7 mid 2012 And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve t

    I have a macbook pro core i7 mid 2012
    And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve this problem and thank you

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • I am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!

    i am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!
    When i press command+I (Get Info) i see that there is 140 GB "Available Space" on my hard disk but when i click on my hard disk icon on the desktop, and then press "space" i only see 102 GB free!! What the f*???
    Please HELP!!!!!! Getting second thoughts on Lion!!!!

    Hi b,
    Have you restarted yet?

  • What does the open file dialog do 'under the hood' and is there a way to simulate it

    What does the open file dialog do 'under the hood' and is there a way to simulate it?
    I have a bug in my code (that I've posted about before, here) which I can't fix at the moment, but I do have a workaround.
    Briefly, the bug:
    I call a dll from a function node, to initialise and run a spectrometer. If I start up the PC, LabVIEW and run my vi the code runs without complaint, the first call to the dll to initialise the spectrometer doesn;t return an error but the spectrometer is not detected either.
    I've tried various solutions, see the link above, and none work
    The workaround:
    If, at any time before running the code containing the function node I open an 'open file' dialog window, select the dll and click ok/hit enter then everything is fine. When I run the main code the spectrometer is detected.
    I use an express vi to open the file dialog, I specify the start path and file name as constant inputs and just click ok/hit return when the dialog pops up. I don't do anything with the dialog outputs. In fact the vi that contains the open file dialog can be run before the project containing the bug is even open.
    I have to do this everytime I turn the PC on.
    So, either
    1) Can somewone suggest a fix for the original bug?
    2) What is the easiest way to simulate the enter keypress when the open file dialog pops up
    or
    3) Can someone tell me what the open file dialog does under the hood that somehow causes the dll to work and can it be simulated in straight LabVIEW
    I suspect that the dll itself is dodgy ( I have in the past talked to the supplier but not got very far, and I will try again but I would like a quick, temporary solution too). I'm guessing that the file dialog is making some kind of check on the file, and possibly registering its presence with the OS (winXP). I tried using the file/folder exists vi to see if checking the file like that worked but no luck.
    Any help greatly appreciated.
    Dave

    Hi David
    I am very conscious about thread hijacking but this sounded like my issue so I hope you dont mind me asking about your issue. I am hoping that you have a spectrometer from the same vendor as me and its not just me seeing an Error 1097 issue. My spectrometer is from a company called Stellarnet.
    So far I have unable to get it to work with other VIs. There is one condition where I can get it to work but its no good for me.
    Case 1
    I open the VI in a fresh labview environment with no other VIs in memory. The code runs with no issue.
    Case 2
    Labview is not opened. I double click the spectrometer VI in windows explorer.  The VI opens but it fails to run resulting in Error 1097. Personally, I dont see the difference between this and Case 1 above and yet it fails.
    Case 3
    If I already have other VI's in memory and try to load the spectrometer VI and run it fails with Error 1097. This case is the one that most important to me. I have a test executive that will load test VIs dynamically and I can't get this to work. Same problem Error 1097.
    I wanted to share what I have seen with you and to let you know that maybe somebody else has the same issue. I am convinced its the DLL but the vendor dis-agreed saying it was LabVIEW. I couldn't convince him otherwise.
    Thanks in advance
    David

  • Since updating my IPhone 4 to IOS 6, I am unable to pull up the list of Purchased apps under the Apps/Updates.

    Since updating my IPhone 4 to IOS 6, I am unable to pull up the list of Purchased apps under the Apps/Updates.  I suspect I am too low on RAM to load the entire list of purchased apps.  Any solution?

    Hi Urs
    I searched a lot and maybe found a part of the reason for this high data traffic.
    I'm synchronizing my contacts, calendar & reminder with iCloud & my mail with Hotmail.
    When push is activated for Hotmail, that doesn't matter, but when push is activated for iCloud, the amount of data nearly explodes. So I turned iCloud to manual and let Hotmail on push.
    Contacts, calendar & reminder are synchronizing when opened (I think this is enough).
    Also I do a backup on iCloud and than I deactivate the function (I do not delete the last backup, I only deactivate the option for automatic backup).
    It seems, that the backup functionality also generates traffic when not on WiFi - especially at night!!
    The battery life has been getting better, when I deactivated the support for automatic time zone changes (location services were always on).
    The battery finaly got MUCH BETTER since the update on iOS 5.0.1.
    My traffic is actually higher than on iOS 4 but not so high as before I deactivated some services...
    I hope this info is a little help for you!!
    Let me know if this works for you, ok?
    Best regards,
    Wolfgang

  • Anyone have the problem I'm having with the Safari collecting cookies even when I'm not on a website?  I cleaned everything out and checked several times.  Each time cookies were added that I've never seen with my older version of Safari.  I have the bloc

    Anyone have the problem I'm having with the Safari collecting cookies even when I'm not on a website?  I cleaned everything out and checked several times.  Each time cookies were added that I've never seen with my older version of Safari.  I have the block third parties and advertisers but I don't think it works.  Here's a sample of what is popping up:  247realmedia.com, 2mdn.net addthis.com, admeld.com, adsafeprotected.com, adsonar.com, bit.ly, bluekai.com, bluelithium.com, bluetoad.com bondware.com.......... over 100 things without a clue where they are coming from.  Especially since I'm not on any webpage!  How do I report a bug?  Is there a way to fix this?  

    Firefox + NoScript, BetterPrivacy, Ghostery, AdBlock Plus, Click&Clean helps.
    Hidden Flash cookies are stored in "Macromedia" Folders on your computer, can delete using the free Easy Find, but need to reinstall Flash again here
    http://www.macupdate.com/app/mac/11076/easyfind
    http://get.adobe.com/flashplayer/
    OnyX run afterwards All the cleaning and maintenance steps followed by a reboot, followed by a Disk Utility erase free space.
    http://www.titanium.free.fr/
    CCleaner is in beta for OS X, can combine the cleaning and secure erase in the same steps if properly configured.
    http://www.piriform.com/mac/ccleaner
    Ideally, to surf XXX sites, one should use a virtual machine software like the free VirtualBox and a ISO of Linux like MacBuntu,
    https://www.virtualbox.org/
    http://www.oslike.se/
    comes with Firefox and Flash is available in the Ubuntu Software Center, create a "snapshot" of this virtual machine to revert back too after surfing. This dumps everything hidden or malware related in the guest OS, scrub the drive if you wish with Disk Utility Erase free space option.
    HTML 5 has introduced a whole new range of tracking ability, you can search for the details online.
    Flash cookie, everycookie, HTML cookies. Google has trackers all over the internet, they record your computer info and all your searches, ISP's record all your IP traffic and keep it for a year, cell carriers track your location via tower and signal triangulation (even non-GPS/smartphones) and keep the results for 6 months and both turn over everything to governments. In fact Uncle Sammy has NSA backrooms on the Internet backbone capturing the traffic in real time.
    http://yro.slashdot.org/story/11/03/26/179257/German-Politician-Demonstrates-Ext ent-of-Cellphone-Location-Tracking
    Turn off Java. Run with little or no scripts. (NoScript)
    SSD drives can't be securely erased as this would wear them out prematurely, the government and police have a portable device from Cellbright they can attach to over 3000 phones and grab the data and password with.
    http://hardware.slashdot.org/story/11/02/17/1911217/Confidential-Data-Not-Safe-O n-Solid-State-Disks
    http://www.thenewspaper.com/news/34/3458.asp
    Creepy program track you by pictures you took
    http://www.thinq.co.uk/2011/3/30/creepy-app-warns-end-privacy/
    Apple trying to patent new spyware
    https://www.eff.org/deeplinks/2010/08/steve-jobs-watching-you-apple-seeking-pate nt-0
    http://betanews.com/2011/04/20/apple-tracking-location-of-ios4-device-users-rese archers-say/
    Each computer has a unique ID and a MAC addrress on file with Apple, Java gives up this information with a simple script on websites
    Also look here and freak out.
    http://www.whatsmyip.org/more/
    You can't win, the government, advertisers, social sites, search engines and devices makers are all in cohoots to profile everyone.
    Live off the grid and have your freedom or tell everyone your business and let them mold you, there is no "in between", try as you may they just come up with new stuff to watch you, through your web cam, via the hidden microphone and even can turn on some cell phones microphones too.
    You may be paranoid, so is the government, and they got more money, power and resources at their disposal to act on it.
    Erase the whole hard drive and reinstall, if you can't do that, trash the entire machine and go read a book.
    https://discussions.apple.com/message/16276201#16276201
    (ps. that was fun, enjoy the paranoia because they ARE watching you.)

  • TS1373 my  5th generation ipod acts like it is going to sync and then "ejects" itself before even 1 song can be synced. It then doesnt recognize that it has been ejected and keeps the"do not disconnect" icon on the screen even after unplugging. What do I

    my  5th generation ipod acts like it is going to sync and then "ejects" itself before even 1 song can be synced. It then doesnt recognize that it has been ejected and keeps the"do not disconnect" icon on the screen even after unplugging. What do I do?  it also makes a lot of noise while connected to the computer.

    Is the camera damaged? Could be a hardware problem.
    Try:
    Close the Camera app in the multitasking bar, then try again.
    Restart/Reset/Restore your iPod. In that order.

  • I am using only one Apple ID. The problem, since iOS 6,  is the App Store purchased items screen just shows loading screen  it finally crashes or gives the error message 'can not connect to  Apple store'

    I am using only one Apple ID. The problem, since iOS 6,  is the App Store purchased items screen just shows loading screen  it finally crashes or gives the error message 'can not connect to  Apple store'

    I am using only one Apple ID. The problem, since iOS 6,  is the App Store purchased items screen just shows loading screen  it finally crashes or gives the error message 'can not connect to  Apple store'

  • How can I re-set the App Store so the Updates will again appear under the Updates tab?

    Hi,
    I am running a Macbook Pro (retina). Lately when I launch App Store and click on Updates the software updates for the software on the Macbook do not show up under the Updates tab. However, when I go to the Purchased tab I see there Update buttons next to programs that have updates ready to download.
    How can I re-set the App Store so the Updates will again appear under the Updates tab?
    Many Thanks,
    David

    Wanna know this too

  • How do I find out what program / file is using 100 GB of space on my Hard drive?  Once I find the problem  how do I delete the specific files to increase GB of space?

    How do I find out what program / file is using 100 GB of space on my Hard drive?  Once I find the problem  how do I delete the specific files to increase GB of space?

    Use OmniDiskSweeper
    Once you find file, it can be deleted from within OmniDiskSweeper
    Allan

  • My 1st generation Time Capsule/2007 keeps shutting off and disconnecting from internet?  What could be the problem?  How long do the Time Capsules usually last?

    My 1st generation Time Capsule/2007 keeps shutting off and disconnecting from internet?  What could be the problem?  How long do the Time Capsules usually last?

    That it is still working is miraclous.. most have died.. lots started flaking out at 18months to 2years..
    See deadtimecapsule.org
    The few that remained now seem to have reached EOL.. you can repair if you have some skills.. fairly cheaply.
    But it is well and truly time to replace.
    https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair

  • After upgrading from Mavericks to Yosemite I can no longer find in Mail the icon (looks like the Add To Contacts icon without the   mark) I used to press in order to obtain an e-mail address from my contact list. What procedure should I use now in or

    After yesterday upgrading from Mavericks to Yosemite I can no longer find in Mail the icon (looks like the Add To Contacts icon without the + mark) I used to press in order to obtain an e-mail address from my contact list. What procedure should I use now in order to quickly add an address to an e-mail that I wish to send?
    Bob

    On the right of the To: field you will see a circled plus sign:
    Click it.

Maybe you are looking for