The project contains inactive include tables during activating the project

Hi experts,
I created the project in cmod using enhancement MM06E005. After created i got the issue The project contains inactive include tables CI_EKKODB & CI_EKPODB during activating the project. I want to move my project to production. please guide me to solve this issue...

Hi,
You need to activate the structures CI_EKKODB & CI_EkpoDb. After this, you need to activate the standard table EKKO & EKPO.
Then, you need to adjust the tables in SE14.
Regards
Senthil

Similar Messages

How to add a privacy page and exclude it from the main menu, but include in links at the base

adding a privacy statement page and excluding it from the main menu, but including in links at the base of site

Right click on the page in Plan view and choose to exclude from menus. This will take it off your main nav.
For your bottom nav, change the menu to manual and add the privacy page manually.

Is the Profit Center a pre-requisite for activating the New GL?

We are currently using the Classic General Ledger in the ECC 6.0 and looking into activating the New General Ledger. However, we are not using the Profit Center. Can anyone help me if we can activate the new General Ledger without activating the Profit Center?
Thanks

Nope - that is incorrect information - there are many benefits to new GL. However turning on new GL and not using PC are not connected to each other. PC is activated in case if you genuinely feel the need to report Profits/revenues across a PC.

Short dump during activating the BC Set in SCPR20 - "GETWA_NOT_ASSIGNED"

Hi experts,
We have upgraded from SRM 4 to 7.0.We are facing an issue when activating the BC Set in SCPR20. A short dump is occuring inside the program 'VIRSA/SAPLZVIR'. We got the solution that some correction instructions mentioned in the SAP Note 1095700 needs to be mplemented. The steps mentioned in the Note are,
1) Run transaction SE54 and click the button 'Edit Function Group'.
2) Next, enter the name of the function group /VIRSA/ZVR1.
3) Select the radio button option 'Re-generate group-specific programs',and press the 'Change' button.
4) In the following popup please mark only the option 'structure spec.data declaration renewal' and press enter.
We were able to proceed with the first two steps but stuck up during the execution of step3. When we selected the radio button u2018Re-generate group-specific programsu2019 and when clicked on the change button, we are getting a message like u2018the name space u2018/VIRSA/ZVR1u2019 does not exists. Because of this we are not able to proceed with the last step.
Kindly provide some ponters as of how to overcome this issue ..
Thanks in advance,
Dhan

Hi there,
To overcome this error you need to go to se06 and make the "/VIRSA/" namespace as Modifiable.
Also, you should have a look at the following note if my first suggestion doesn't work.
1041089 Tx SCPR20: GETWA_NOT_ASSIGNED dump during BC Set activation
Hope this helps.
Kind Regards,
Matthew

What is the purging mechanism on historical tables during 80%

Hi,
I have a UCCE 7.2.5 environment. Lately the HDS database is reaching 80% usage threshold and the system started to purge the database automatically.
Realised the auto purge is always purging for a few tables only. Can someone advise how the auto purge works?
Appreciate your help in advanced.
Thanks.
regards,

Hi Joe,
Thanks for the info. You mentioned "purge the oldest data in alphabetical order", does it mean the following table order?
- t_Agent_Half_Hour: 615
- t_Agent_Logout: 2
- t_Agent_Skill_Group_Half_Hour: 615
- t_Agent_Skill_Group_Logout: 2
- t_Agent_State_Trace: 36
- t_Call_Type_Half_Hour: 10
- t_Network_Trunk_Group_Half_Hour: 780
- t_Peripheral_Half_Hour: 781
- t_Physical_Controller_Half_Hou: 781
- t_Route_Call_Detail: 1
- t_Route_Call_Variable: 1
- t_Route_Half_Hour: 781
- t_Routing_Client_Five_Minute: 781
- t_Service_Half_Hour: 781
- t_Skill_Group_Half_Hour: 781
- t_Termination_Call_Detail: 28
- t_Termination_Call_Variable: 1
- t_Trunk_Group_Half_Hour: 780
If you take a close look, the 615, 2, 36, 10 etc are actually the different day of data till date. For example, t_Call_Type_Half_Hour table has data upto 10 days only.
If the purge method mentioned earlier is true, the t_Agent_Half_Hour table should be the first to purge? But in real case, the purging tables are in random order.
Please advise.
Thanks.
regards,

When I go to a signin page of a website the remember passwrd button will not allow me to click on it in Firefox 11, the button pops up but is not active. the same site works fine in chrome. Is there a fix for this?

am running win 7 64 pro - tried going back to firefox 10 with same results. all the tools options are set to remember passwords

Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
It is possible that there is a problem with the files key3.db and signons.sqlite that store the encrypted names and passwords in Firefox. 
Rename the files key3.db and signons.sqlite in the Firefox profile folder. 
You can add .old to the file names (key3.db.old and signons.sqlite.old) or move them to another folder to make it possible to undo the action. 
You need to set a new Master Password after renaming or deleting key3.db and all currently saved passwords are lost. 
If that has worked then you can remove the renamed files that are no longer needed. 
See:
* "Troubleshooting" in http://kb.mozillazine.org/Password_Manager
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder

How to restrict the entries of a database table based on the user name

Hi All,
I have created a Database Table. Table maintenance generator is generated for the table.
UNAME(user name) is one of the fields in the table. whenever the user creates a new entry, the field UNAME will be populated automatically with SY-UNAME value. I have used Table event '05' to do this.
My requirement is...
When a user tries to maintain the entries of the table using SM30, when 'DISPLAY' is chosen, all the records of the table should be displayed.
When 'MAINTAIN' is chosen, only those records which have UNAME = SY-UNAME(User Logged in) should be in EDIT mode. and rest all the records should be in DISPLAY mode(greyed out). It should allow to edit only those records which are created by the user logged in.
Could you please tell me how to do this..? Thanks in advance.
Thanks & Regards,
Paddu.

HI,
In table main. gen there are number of events , try to select one event like 05 for the Sy-uname.
For the requirement:
In that event write the code like
this is basic idea not the code:
Case ' Sy-ucomm'.
when 'display'. " button
Nomally for the display button it will show all the records, but we need to write a code like this.
select all records frm the table.
( Need to write the code in case if the user first maintained the data then again press the display , list has to be refreshed.)
when ' Maintain'. " button.
Fetch the records that are with SY-UNAME and find out the edit function and implement it on each and every record.
endcase.
Thanks and Regards,
Bharani.

I'm trying to avtivate Facetime on my Ipod Touch but every time I enter it it gives me the message of "An error occured during activation Try Again"

I have reset my Wi-Fi and I know my apple ID is correct Please Help!

See Here...Troubleshooting FaceTime
http://support.apple.com/kb/TS3367
FaceTime... Set Up... Use and Trouble Shooting Guide

Does the AS2 adpater is included by default in the SOA suite 11g or BAM

Hi,
I wanted to know that does the AS2 adpater comes by default with the SOA Suite 11g package or with BAM or we do need to have a seperate licensing for the adapter.
Thanks in Advance,
Jignesh

Hello Jignesh,
Oracle B2B (part of Oracle SOA suite 11g) supports AS2 exchange protocol. I don't think you need a separate license for that but still it would be better to confirm it once with your local Oracle Sales representative.
For Oracle B2B related info, please refer -
http://www.oracle.com/technetwork/middleware/b2b-integrations/overview/index.html
Regards,
Anuj

Mail freezes upon launching, I have deleted the whole container folder, restarted and still have the problem, below is the error message

23/10/12 19:07:04,078 Mail[474]: Using V2 Layout
23/10/12 19:07:05,357 com.apple.SecurityServer[15]: Session 100019 created
23/10/12 19:07:07,000 kernel[0]: MacAuthEvent en0 Auth result for: 00:21:a0:00:83:80 MAC AUTH succeeded
23/10/12 19:07:07,000 kernel[0]: wlEvent: en0 en0 Link UP virtIf = 0
23/10/12 19:07:07,000 kernel[0]: AirPort: RSN handshake complete on en0
23/10/12 19:07:07,000 kernel[0]: wl0: Roamed or switched channel, reason #8, bssid 00:21:a0:00:83:80
23/10/12 19:07:07,000 kernel[0]: en0: BSSID changed to 00:21:a0:00:83:80
23/10/12 19:07:07,000 kernel[0]: en0::IO80211Interface::postMessage bssid changed

Could you please help?

Including table and column comment in the Data Modeler

Hi all,
I used Oracle's SQL Developer Data Modeler (Version 3.0.0.665) and created a data model for my project. I e-mailed a PDF format of the data model to our Systems Analyst. She asked if I could re-create the data model and include table and column comments. Is this a possibility and if so how is this done?
Thank you for your input,
Seyed

Hi Kent,
Using the information you provided and Oracle’s Working with SQL Developer Modeler Reporting I did the following:
1) Created a Reporting Schema User
1.1) Using my Oracle 10g Personal Edition, I created a new user and gave him DBA administrative privileges
2) Exported Relational Design to Reporting Schema
2.1) Opened the Relational Design
2.2) Exported it to the Reporting Schema. Note, I never got a message ‘Design has been exported successfully’.
3) Reviewed the Report Results
I think exporting the relational design was not successful, and didn’t get any error messages. Had step 2 completed successfully, I would have reviewed the Report Results in SQL Developer. By the way, I know I have marked this topic as closed, but would like to learn your method too.
Thank you for your help,
Seyed

"An error occurred during activation. Try again." Can't log into iMessage on Macbook for past two weeks.

iMessage worked fine on my Macbook until about two weeks ago. I can use iMessage for gMail, but my iCloud account is inactive and I get the error message "An error occurred during activation. Try again." when I try to log in with any apple ID. It works fine currently on my iMac and my iOS devices.
I have tried many suggestions, including checking the serial number, various time & date configurations, trying an alternate Apple ID, restarting, signing in and out of iCloud, and inspecting the keychain.

This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Sign out of iMessage on all your Apple devices. Log out and log back in. Try again to sign in.
Step 3
Restart your router and your broadband device, if they're separate. You may have to skip this step if you don't control those devices.
Step 4
From the menu bar, select
 ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 5
Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 6
From the menu bar, select
 ▹ System Preferences ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
Step 7
Select from the menu bar
 ▹ System Preferences… ▹ Flash Player ▹ Storage
and click
Block all sites from storing information on this computer
Close the preference pane.
Step 8
Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" or "com.apple.idms" in the name. Log out and log back in.
Step 9
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 10
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you start up, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, restart as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but still doesn't work when you restart in "normal" mode, stop here and post your results.
Step 11
Reset the NVRAM.
Step 12
Reinstall OS X.
Step 13
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support.

Include files from a different project ...

Hi,
I have projects A and B.
Project A contains "includes": a directory with several include files.
Project A gets deployed as a JAR file (ProjectA.jar). Example content:
/includes/menu.jspfThe target directory for Project A's deployment JAR file is set to: /
Project A has the following HTML Root Directory: ...AppA\ProjectA\public_html
Project B has the following HTML Root Directory: ...AppB\ProjectB\public_html
Project B needs the include files from Project A.
Project B has Project A as a dependency.
Project B has ProjectA.jar within its WEB-INF\lib directory.
The problems are:
1. Project B does not see the "includes" directory within its "Web Content" folder from Project A. How do you make Project B see Project A's includes directory?
2. Project B cannot compile the following code:
<jsp:directive.include file="/includes/menu.jspf" />
...The error message: Include file not found: /includes/menu.jspf
The error message is to be expected as Project B cannot currently see the files located within WEB-INF\lib\ProjectA.jar. How can this be fixed?
3. I have tried changing the HTML Root Directory to the "public_html" directories from both Project A and Project B. JDeveloper then displays an error indicating that it cannot find <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>.
There should be a way to do this, as the images and styles for ADF are successfully deployed and used within WEB-INF\temp\adf.
Any ideas are greatly appreciated.
Thanks!

Hi,
I used a program called "Junction" to resolve this issue. It is a temporary solution.
http://technet.microsoft.com/en-us/sysinternals/bb896768.aspx
The program makes a true symbolic link. This allowed me to link the includes directory from ProjectA into ProjectB. Linking this way will not work when we go to deploy a suite of applications. We would prefer to package the includes in a single JAR file, then redeploy the JAR file everywhere.
Any other ideas?

ALTER TYPE MODIFY ATTRIBUTE cascade including table data

Hi,
does anybody know, why I get "ORA-00932: inconsistent datatypes: expected REF TYPE1_T got REF TYPE1_T"
after ALTER TYPE MODIFY ATTRIBUTE cascade including table data when the altered type contains a nested table of type REFs.
according to the documentation this should work? This works when the type contains a nested table of types!
ORACLE Version: 9i EE 9.2.0.3.0 64 bit
OS: HP-UX 11
-- create type1
CREATE OR REPLACE
TYPE TYPE1_T AS OBJECT
T1COL1 NUMBER,
T1COL2 VARCHAR2(35),
TYPE2REF REF TYPE2_T
-- create coll of type1 refs
CREATE OR REPLACE
type TYPE1COLL_T IS TABLE OF REF TYPE1_T
-- create type2
CREATE OR REPLACE
TYPE TYPE2_T AS OBJECT
T2COL1 NUMBER,
TYPE1COLL TYPE1COLL_T
-- create table of type1_t
CREATE TABLE TYPE1_OTB OF TYPE1_T
-- create table of type2_t
CREATE TABLE TYPE2_OTB OF TYPE2_T
nested table type1coll store as type1coll_ntb
-- populate type1_otb
INSERT INTO type1_otb
VALUES(1, 'ABCDEF',NULL);
-- populate type2_otb
INSERT INTO type2_otb
VALUES(1,TYPE1COLL_T());
select * from type1_otb;
T1COL1 T1COL2
TYPE2REF
1 ABCDEF
select * from type2_otb;
T2COL1
TYPE1COLL
1
TYPE1COLL_T()
ALTER TYPE type1_t MODIFY ATTRIBUTE t1col2 varchar2(50) cascade including table data;
Type altered.
select * from type1_otb;
T1COL1 T1COL2
TYPE2REF
1 ABCDEF
select * from type2_otb;
select * from type2_otb
ERROR at line 1:
ORA-00932: inconsistent datatypes: expected REF TYPE1_T got REF TYPE1_T

Hi John,
I am also facing the same problem after executing the command
SQL> alter type product_object modify attribute (NAME VARCHAR2(80)) cascade;
with the following error
ORA-00932: inconsistent datatypes: expected REF WOLFOBJECTS.EMPLOYEE_OBJECT got
WOLFOBJECTS.EMPLOYEE_OBJECT
Could you please suggest any alternate or workaround for this issue?
Thanks
Sara

Project Server 2010 - Error 20010 with a master project and 3 sub-projects during publication

Hi,
Here is the situation :
One master project with three sub projects.
Sub projects are really similar (Same ressources and nearly same tasks but only the first contain real work for now).
Sub projects got no sub projects nor links between projects.
The owner of the master project got read rights through projects permissions on sub projects.
Sub projects are link in "read only".
We applied Project Server 2010 SP2 last week end and the issue appeared monday.
Here are the symptoms :
When we link only one sub project (Doesn't matter which one), the owner can publish, no problems.
With 2 sub projects, the error may occur.
With 3 sub projects, the error always occurs.
With admin rights, the error doesn't occur.
Here is the error :
ID : 20010 (0x4E2A)
Description : You don't have required permissions to perform the action (Average traduction)
Detail : <detail><errinfo><general><class name="Project"><error id="20010" name="GeneralSecurityAccessDenied" uid="19515c1d-2624-466f-953a-b7fc67337b81"/></class></general></errinfo></detail>
I'm unable to determine which sub project is the culprit, if there is one, as it's working when I link only one of them.
Thanks for your time !

Fylim --
If the project manager in question does not need to edit any of the three projects, the PM does not need to have Read/Write access to any of the three projects. Because you said that the PM needs to set links in all three projects, this means that
the PM will be editing all three projects. In order to edit the three projects, the PM must have Read/Write access to all three. Setting cross-project links constitutes editing of the projects, which is why the PM must have Read/Write permission.
Make sense?
Regarding SP2, I am not aware that this would change anything, but I could be wrong. The reality is that regardless of which SP you have applied to Microsoft Project and Project Server 2010, the PM in this situation MUST have Read/Write access to the
projects that he/she needs to edit with cross-project links. Hope this helps.
Dale A. Howard [MVP]

The project contains inactive include tables during activating the project

Similar Messages

Maybe you are looking for