The quality of printing is drastically reduced. The page has faint horizontal pink and blue stripes

Over the last several days the quality of print has diminshed. Currently, printed pages have horizontal faint stripes of pink and bue and some yellow. Also, there is a thin blue vertical stripe on the right side of the paper.

Hi dwoodall712.
I will be glad to assist you.
I recommend performing the fixing unit and transfer belt cleanings. Please follow the instructions below:
Fixing Unit
1. Press [ ].
2. Use [ ] / [ ] to select <Adjustment/Maintenance>, and press [ ].
3. Select <Clean Fixing Unit>, and press [ ].
4. Press [ ].
Cleaning starts. When the <Finished.> message is displayed approximately 1 minute later, press [ ] to return to the main screen.
Transfer Belt
1. Press [ ] .
2. Use [ ] / [ ] to select <Adjustment/Maintenance>, and press [ ].
3. Select <Clean ITB>, and press [ ].
4. Press [ ].
Cleaning starts. When the <Finished.> message is displayed approximately 1 to 2 minutes later, press [ ] to return to the main screen.
I hope this information is helpful to you. Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

After creating a new slideshow I export it with the setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?

After creating a new slideshow I export it with the setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?

DVD's are only 640 x 480 (interlaced), so yes, the quality is not nearly as good. You should probably create your .mov in DV format to best match the DVD format

Will the iPad Mini print to / scan from the HP 7280; with USB cable?

Will the iPad Mini print to / scan from the HP 7280; with USB CABLE?
Thanks, everyone...
---sue h (Apple novice)
iPad Mini

https://itunes.apple.com/us/app/genius-scan-pdf-scanner/id377672876?mt=8
I use this app. It takes a photo and turns it into a PDF (the photo that you take with your iPad/iPod)

Why are the photos i print much darker than the monitor image?

why are the photos i print much darker than the monitor image?

Please read this post then provide some details. What printer model? What operating system? What program are you printing from?
Some programs such as Photoshop give the option to print to CMYK or sRGB color spaces. Even though the printer uses CMYK inks the driver is expecting sRGB data. If CMYK is selected the prints will be much too dark.
Another thing to check is the media type. If you are printing on plain paper and have seelcted Photo paper the prints have too much ink.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Since i have upgraded my i phone5 to 7.0.3 it has problem with 3g it display the service message every time, it reduce the battery life also.

since i have upgraded my i phone5 to 7.0.3 it has problem with 3g it display the service message every time, it reduce the battery life also.

Try using Settings > General > Reset > Reset All Settings.

When I try to open a file I created in Pages, I get this: "The required index.xml file is missing." This has happened many times and I have forgotten how I've worked around it.

When I try to open a file I created in Pages, I get this: "The required index.xml file is missing."
This has happened many times and I have forgotten how I've worked around it.

That is wrong advice and you appear to have repeated it all over the forum.
All Pages files no matter what version have the same file extension, .pages, despite being radically different formats and that is the problem. The System does not distinguish between them when you double click on the file, it opens the first version of Pages it encounters.
You need to right click on the file and choose the correct App version for the file. Unfortunately there are no clues to tell you which is which.
If you are unhappy with this and the removal of over 100 features plus the problems with transmitting files across devices, servers and different versions of OS X, rate/review Pages 5.5.2 in the App Store.
Peter

Printer finds 'image to complex to print' - can I reduce the resolution?

This may be a printer issue, heaven knows this HP 2840 has given me enough of those, but I'm trying to print out an image that my printer thinks is too complex to print. Is there a way for me to drop the print resolution down a bit to see if I can print? I've reduced the resolution of the image in 'Image size' to 72 dpi and unchecked 'resample' but it's still telling me it is printing a 600 dpi image. What do I do?
I'm using PSE 9.0. Thanks!

Image>resize>image size brings up a dialog in which you specify pixels/per inch. For a good print, it is desirable to have the resolution = 240-300px/in. Printing at 72 px/in usually results in pixellation
DPI to which you refer is a printer setting for the print quality.
Open a picture file in Editor, go to File>print, and in the dialog that comes up, #2 is for Printer settings, and here you may be able to change the settings from default. I don't have an HP printer.
"but I'm trying to print out an image that my printer thinks is too complex to print". This is anthropomorphism at its finest. Do you get a warning message when you go to print? What does it say?

How do I get the HP Smart Print icon back in the toolbar?

The HP Smart Print icon used to appear in the Firefox toolbar. I had to reload Firefox. the icon no longer appears. How do I get it back? I am using Windows 7.

HP Smart Print (formerly HP Smart Web Printing) is supported only in <u>IE 6 and later and is no longer supported on any other browser</u> ---- that was a decision made by HP, not Mozilla.
*See - http://h41112.www4.hp.com/smartprint/us/en/smart.html?jumpid=ex_r602_ww/en/hho/ipg/xx-mu-aw_chev/smartprint (click to expand item 12 at the bottom)
*See - http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c01812475#N152
*See - http://h30434.www3.hp.com/t5/Web-Printing-Software/HP-Smart-Web-Printing-and-Firefox/td-p/105151/page/7 ''(this is HP forum discussion from 08-15-2009 to 08-28-2012; see last comment on page 7 dated 08-28-2012 by user '''Shirlzz1''')''

So annoying! When I print just from the browser, it prints unreadably small in the top center of the page.

I have called support on my actual printer and everything is fine, they suggested to contact the browser I am printing from. Microsoft word and other software prints normal. Any web page I attempt to print from, even when I select the "print page" option, I have this error. I have been through all the troubleshooting to reset defaults.

Does the issue still occur if you start Firefox in Safe Mode? http://support.mozilla.com/en-US/kb/Safe+Mode
How about with a new, empty profile? http://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile
What steps have you tried?
What is the printer model? What driver/version are you running?

Can you change the quality of YouTube videos? Using the YouTube application?

I have a iPhone 4s and I was just wondering can you change the quality of YouTube videos using the intergrated app. Because I have a bad internet connection and I would like to watch YouTube videos without the trouble of going into safari and doing it that way.

The dedicated app is going by the wayside with iOS 6, so a good time to get used to accessing YouTube with Safari only unless you don't plan on installing iOS 6 or unless YouTube decides to provide an app for free or a paid version via the App Store for iOS 6 and later.

I was printing to the hp e printer fine, but now the iPad still recognizes the printer ,but nothing prints. I continue to successfully print wirelessly from my computer, but not the iPad. Any ideas?

I have an hp photosmart eprinter and have been successful in the past printing to it, but now it shows on the iPad that it recognizes the printer and is printing, but nothing prints. I can still print wirelessly to this from my home pc. Any ideas?

bikrambabe wrote:
Hi - can you tell me please what and where I will find the multi tasking menu cos I have the same isse as MVDefender. Thanks
Sure, double-press the Home button quickly and the multitask menu will appear at the bottom of your screen.

How do I get the quality of my movie to match the quality of the export?

When I export my sequence into a Quicktime movie the quality is much worse than it appears in the editor. More specifically, it looks washed out. Thanks for any support and information on how to resolve this issue.

To verify, this is with Final Cut Express, not FCP-X, correct?
You should have a copy of QuickTime Player 7 on your system if you have installed Final Cut Express.
It is sometime located in the Utilities folder on your computer:
QuickTime X is not suitable for this kind of work. It is a general purpose player. I (IMHO) would not steer my color correction by what QuickTime X is showing me.
MtD

My whole iPad screen is pink and blue I don't know what happened can someone answer my question and how can I help my iPad from the pink and blue screen

Thank u very much if you helped me and in the message can u also include how I can fix my ipad thank u very much

You may very well have to restore the iPad eventually, but start by rebooting the iPad and see if that helps, before you start doing anything too drastic.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Is there a way to delete photos from Photo Stream on my macbook pro? (Not from my folders,etc.) I need to empty the photo stream. Something in my photo stream has corrupted my phone and my apple specialist suggested I do this.

Is there a way to delete the photos in Photo Stream on my mackbook pro notebook?
My phone became corrupted today and, after continuing to have problems with 2 new phones, the apple specialists determined that the only possible explanation was the presence of a corrupted photo or video in photo stream; and that the only way to use my phone without it shutting down was to deactivate the photo stream on it. It worked, but I would like to be able to have the option of using photostream again. The apple folks suggested that I delete all photos from photo stream on my computer; and then, when it is "empty", reactivate it on my phone? Is anyone familiar with this problem?

If it says Not Enough Storage Space on iCloud then you can get more Storage space for iCloud if you want to backup more Data on iCloud Storage. You will find the Pricing for Additional Storage Space and how to Buy Storage Space for iCloud from your Device in the Link below.
http://support.apple.com/kb/ht4874
http://support.apple.com/kb/HT5879

My Mac Book Pro has faint horizontal yellow lines moving vertically. on the monitor.

My early 2011 MBP 15" has developed a phenomenon of faint, horizontal yellow lines, in clusters, flickering and seeming to move vertically. It is intermittent and cycles on and off with about 10-15 sec. on and 10-15 sec. off. It is faint enough that it is very hard to see except on a white screen, or a large white area. I first noticed it about a month or 6 weeks ago and it seems to be getting a little bit more noticeable. It is still faint enought, however, that I really don't notice it when I'm working. But it's not hard to observe if I stop and look at a white area for a little bit. I am not noticing any other abnormal behavior.
I have been very busy and kind of ignoring this problem. But a couple of days ago, I realized that I have only 15 days left on my 3 year Apple Care on this machine. At the present level, it SEEMS harmless enough, but I realize it could be a failing video card or video power supply, I suppose (it kind of has a flicker rate suggestive of 120 Hz AC).
I'm probably going to make a Genius Bar appt. in the next couple of days, but I just thought I would see what comments or suggestions this collectively very wise community might have. I am vaguely aware of comments about "hardware diagnostics" built into the Mac, but, if true, I don't know the details. Comments solicited!

So I went to the Genius Bar with the history as outlined above. We had to watch my display for almost 10 minutes (while he checked various system stuff) before it would perform. But then it cut loose with a very convincing display of the faint, fuzzy groups of yellow lines moving slowly up the screen.
Tech pointed out that we were booted to an OS running on the store's server, NOT mine, so this ruled out software problems in one stroke. He said he'd never seen anything quite like it but felt it was EITHER: video "card" section of the main logic board (all on one in a MBP) OR a failing display. He said one or both would be replaced.
Two days later, picked up my MBP: problem solved! Tech said they connected my laptop to an external display (which I had not tried because I didn't have one available.....though maybe a tv could have subsituted, now that I think of it!) and NO PROBLEM driving the external lcd display. So they replaced my 15" lcd display and problem is gone. "Bill" was about $600, parts and labor, but Apple Care picked it up (with 6 days left to run on the coverage!).
So that's the follow-on for this problem, fyi.

The quality of printing is drastically reduced. The page has faint horizontal pink and blue stripes

Similar Messages

Maybe you are looking for