The quote sign in a String

Hi!
I would like to do a String containing the " sign (the quote sign). For instance, I can not write "Hi and welcome to this cool "world" created by me".
You see the word world will be out of this String.
How do I make " signt in quotes in java?
I want to use " and not any other signs like ` or ' .

huh? dunno if ur askin for this but.........try \"

Similar Messages

Removing a quote sign from data transfer

Is it possible to remove specific characters while transferring data from the PSA table to subsequent data targets?
Maybe there a BW formula that enables this to happen?
In my case, we have created a generic extractor to load statistical data from a BW table into a DSO. We need to remove the quote signs from the transfer of data because the data is failing to activate in the DSO.
We want to avoid resorting to ABAP if possible. Nor do I want to modify the list of approved symbols.

Hi,
If you know the target field where you want to remove quote then you can write routine in the transformation .
You can use field level routine to achive this.
Hope this will help you..
Thanks,
Jitendra

Can a single quote be used at the beginning of a query string parameter

Hi all,
I am a relative newbie and have a newbie question.
Can a single quote be used at the beginning of a query string parameter passed to a jsp page? Are there any inherant problems with this? Is there a comprehensive list of characters that must be escaped in a query string parameter?
Example: http://mysite.com/myjsp.jsp?param1='nghdh
Thanks

You'll have to escape most non-letter characters before you can pass them as a URL. I don't know if it's necessary for a single quote, but better safe than sorry.
Either use java.net.URLEncoder(...) or use javax.servlet.http.HttpServletResponse.encodeURL(String). I wouldn't recommend using unescaped characters in your URLs, that might cause pretty funny behavior that's sometimes hard to trace back. Don't worry about decoding it, your JSP/Servlet container will do it when you call javax.servlet.http.HttpServletRequest.getParameter(String).

Can I use the quoted string in the field like dbms-column or table-name

I see some examples like table name using quoted string in the weblogic-rdbms20-persisstence-810.dtd.
Can the experts tell me how the quoted string should be used for EJB 20?

Hi,
Whether the identifiers should be quoted or not depends whether they were defined that way when the table and colums were created. Whether they can be created/accessed this way depends on the policy of the database that you are using with regards to 'Quoted Identifiers' (also known as 'Delimited Identifiers'). On databases this feature is on by default, on others it is not. If you database objects require quoted identifiers then you may enter them as quoted as you've seen in the weblogic-rdbms20-persistence-810.dtd
Hope this helps
-thorick

What is the Quoting Mechanism for String Literals?

Oracle 10G enterprise edition
Hi all,
I am trying to use the new feature support for string literals in 10G.but unfortunately it returns an error. Is there any settings to be done to get implemented with this feature?
BEGIN
DBMS_OUTPUT.put_line ('This is ram''s string!');
DBMS_OUTPUT.put_line(q'[This is ram's string!]');
END;
ERROR:
ORA-01756: quoted string not properly terminated
Thanks
Ram

Art in oracle wrote:
Oracle 10G enterprise editionAre you sure you are using 10g? (which version?)
It works ok for me... (10.2.0.1)
SQL> select q'[This is fred's quoted string]' from dual;
Q'[THISISFRED'SQUOTEDSTRING]
This is fred's quoted string
SQL> set serveroutput on
SQL> ed
Wrote file afiedt.buf
1 BEGIN
2 DBMS_OUTPUT.put_line ('This is ram''s string!');
3 DBMS_OUTPUT.put_line(q'[This is ram's string!]');
4* END;
SQL> /
This is ram's string!
This is ram's string!
PL/SQL procedure successfully completed.
SQL>

How can i get the correct text from a string like it show in the original source with the quotation marks in the right place ?

The text is in hebrew so the problem is that sometimes the quotation marks not in the right place.
For example i have this text: תווית
על בגד: ''תן לאישה לכבס. זה תפקידה''
This is the source original text you can see the quotations marks and they are not in the right place and all i did is copy paste.
And this is a screenshot of how this text looks like in the website in the original:
You can see now where the quotations marks should be.
Now this is how i'm using the text in my program:
First of all i'm using a webclient to download the page from the website and i'm also encoding it to windows-1255 since it's in hebrew.
using (var webClient = new WebClient())
webClient.Headers.Add("user-agent", "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2; .NET CLR 1.0.3705;)");
byte[] myDataBuffer = webClient.DownloadData("http://rotter.net/scoopscache.html");
page = Encoding.GetEncoding("windows-1255").GetString(myDataBuffer);
Then i'm extracting the places i need by reading the html file lines and parsing the right text and it's link.
string loc;
List<string> metas = new List<string>();
List<string> metas1 = new List<string>();
List<string> lockedLinks1 = new List<string>();
string text = "";
string mys = "";
public List<string> LockedThreads(string filename)
lockedThreads = new List<string>();
lockedLinks = new List<string>();
Regex textRegex = new Regex("ToolTip.*?(?=','<)");
string[] fall = File.ReadAllLines(filename);
for (int i = 0; i < fall.Length; i++)
if (fall[i].Contains("http://rotter.net") && fall[i].Contains("locked")||
fall[i].Contains("locked_icon_general") ||
fall[i].Contains("locked_icon_anchor") ||
fall[i].Contains("icon_anchor") ||
fall[i].Contains("locked_icon_fire") ||
fall[i].Contains("locked_icon_sport") ||
fall[i].Contains("locked_icon_camera") ||
fall[i].Contains("locked_icon_movie"))
Regex linkParser = new Regex(@"\b(?:https?://|www\.)\S+\b", RegexOptions.Compiled | RegexOptions.IgnoreCase);
foreach (Match m in linkParser.Matches(fall[i + 2]))
if (m.Value.Contains("><b"))
loc = m.Value.Replace("\"><b", string.Empty);
lockedLinks.Add(loc);
string txt = fall[i - 1];
string text = textRegex.Match(txt).Value.Replace("ToolTip','", String.Empty);
if (text.Contains("’"))
text = text.Replace("’", string.Empty);
lockedThreads.Add(text);
Already here on the List lockedThreads you can see the quotation marks not in the right place as in the original:
After i'm parsing the text and links and adding them to the Lists in another class i'm doing a comparison using this Lists:
foreach (List<string> l_branch in ListsExtractions.responsers)
TreeNode l_node = treeView1.Nodes.Add(l_branch[l_branch.Count - 1]);
if (ListsExtractions.lockedThreads.Contains(l_node.Text))
l_node.ImageIndex = 0;
l_node.SelectedImageIndex = 0;
for (int l_count = 0; l_count < l_branch.Count - 1; l_count++)
TreeNode l_subnode = l_node.Nodes.Add(l_branch[l_count]);
if (ListsExtractions.lockedThreads.Contains(l_subnode.Text))
l_subnode.ImageIndex = 0;
l_subnode.SelectedImageIndex = 0;
The problem is in the line:
if (ListsExtractions.lockedThreads.Contains(l_node.Text))
When it's getting to the line with the quotation marks it's never equal.
Now there are more quotation marks.
In general the problem when comparing both text if it's having quotation marks it's not the same.
So i have two options:
1. To fix it somehow so the quotation marks will be the same in both variables when comparing and also the same like in the original as they show in the html page.
2. To remove the quotation marks from both variables.
What should i do ? And how ? I was prefer to use the original quotation marks like in the original since they have a meaning in the place they should be. The question is how can i do it ?
This is example of the block from the html file where the text with the quotation marks is:
<TD ALIGN="RIGHT" VALIGN="TOP"> 9418 </TD></TR><TR BGCOLOR="#eeeeee">
<TD ALIGN="RIGHT" VALIGN="TOP">
<body onmousemove="overhere()">
<a onmouseover="EnterContent('ToolTip','תווית על בגד: ’’תן לאישה לכבס. זה תפקידה’’','כתב: Spook בתאריך: 08.03.15 שעה: 22:11 מחאת טוויטר קמה בעקבות תוויות שוביניסטיות שהדפיסה חברת אופנה באינדונזיה לפיהן תפקיד הכביסה מוטל על האישה. החברה התנצלה אך כנראה רק עשתה רק יותר נזק לע...'); Activate();" onmouseout="deActivate()" href="javascript:void(0)">
<img src="http://rotter.net/forum/Images/new_locked_icon_general.gif" border="0"></a></TD><TD ALIGN="right" VALIGN="TOP" WIDTH="55%">

<a href="http://rotter.net/cgi-bin/forum/dcboard.cgi?az=read_count&om=189696&forum=scoops1">
תווית על בגד: ''תן לאישה לכבס. זה תפקידה''
</a></TD>

Ok, it is unclear on what is happening here.
Are you saying that when the webclient gets the data that it is not honoring the quote characters? Or the processing of the data buffer is causing issues?
This is what I see the of your example text which is trying to be parse out:
<a onmouseover="EnterContent('ToolTip','תווית על בגד: ’’תן לאישה לכבס. זה תפקידה’’','כתב: Spook בתאריך: 08.03.15 שעה: 22:11 מחאת טוויטר קמה בעקבות תוויות שוביניסטיות שהדפיסה חברת אופנה באינדונזיה לפיהן תפקיד הכביסה מוטל על האישה. החברה התנצלה אך כנראה רק עשתה רק יותר נזק לע...'); Activate();">";
It appears to me that the escapes `’` does not have matching `“` anywhere within the tooltip. So it appears that the page properly places left quotes in when processing the page, but the raw html has broken text.
Hence a garbage in, garbage out situation.
William Wegerson (www.OmegaCoder.Com)

How to handle the SQL Error: ORA-01704: string literal too long

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta name="generator" content="HTML Tidy for Java (vers. 26 Sep 2004), see www.w3.org">
<title></title>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
<meta content="MSHTML 6.00.2900.2963" name="GENERATOR">
</head>
<body class="BodyContent">
HI please chek the query getting error like string literal too long update PRVDR_ENRLMNT_AGREEMENT B set b.terms=q'#
<div class="widget-title">
<h5>Medical Assistance Provider Enrollment & Trading Partner Agreement - Conditions:</h5>
<a href="# class="btn-minimize pull-right"></a></div>
<div class="widget-content">
<table width="100%" border="0">
<tbody>
<tr valign="center">
<td class="Label" align="left" width="14%" colspan="2" height="32">In applying for enrollment as a provider or trading partner in the Medical Assistance Program (and programs for which the Michigan Department of Community Health (MDCH) is the fiscal intermediary), I represent and certify as follows:</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">1.</td>
<td class="LabelValue" valign="top" align="left" height="32">The applicant, and the employer (if applicable), certify that the undersigned has/have the authority to execute this Agreement.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">2.</td>
<td class="LabelValue" valign="top" align="left" height="32">Enrollment in the Medical Assistance Program does not guarantee participation in MDCH managed care programs nor does it replace or negate the contract process between a managed care entity and its providers or subcontractors.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">3.</td>
<td class="LabelValue" valign="top" align="left" height="32">All information furnished on this Medical Assistance Provider Enrollment & Trading Partner Agreement form is true and complete.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">4.</td>
<td class="LabelValue" valign="top" align="left" height="32">The providers and fiscal agents of ownership and control information agree to provide proper disclosure of provider's owners and other persons criminal related to Medicare, Medicaid or Title XX involvement. [42 CFR 455.100]</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">5.</td>
<td class="LabelValue" align="left" height="32">The applicant and the employer agree to provide proper disclosure of any criminal convictions related to Medicare (Title XVIII), Medicaid (Title XIX), and other State Health Care Programs (Title V, Title XX, and Title XXI) involvement. [42 CFR 455.106 and 42 U.S.C. ? 1320a-7]</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">6.</td>
<td class="LabelValue" align="left" height="32">I agree to read the Medicaid Provider Manual from the Michigan Department of Community Health (MDCH). I also agree to comply with 1) the terms and conditions of participation noted in the manual, and 2) MDCH's policies and procedures for the Medical Assistance Program contained in the manual, provider bulletins and other program notifications.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">7.</td>
<td class="LabelValue" align="left" height="32">I agree to comply with the provisions of 42 CFR 455.104, 42 CFR 455.105, 42 CFR 431.107 and Act No. 280 of the Public Acts of 1939, as amended, which state the conditions and requirements under which participation in the Medical Assistance Program is allowed.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">8.</td>
<td class="LabelValue" align="left" height="32">I agree to comply with the requirements of Section 6032 of the Deficit Reduction Act of 2005, codified at section 1902 (a)(68) of the Social Security Act which relates to the conditions and requirements of "Employee Education About False Claims Recovery."</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">9.</td>
<td class="LabelValue" align="left" height="32">I agree that, upon request and at a reasonable time and place, I will allow authorized state or federal government agents to inspect, copy, and/or take any records I maintain pertaining to the delivery of goods and services to, or on behalf of, a Medical Assistance Program beneficiary. These records also include any service contract(s) I have with any billing agent/service or service bureau, billing consultant, or other healthcare provider.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">10.</td>
<td class="LabelValue" align="left" height="32">I agree to include a clause in any contract I enter into which allows authorized state or federal government agents access to the subcontractor's accounting records and other documents needed to verify the nature and extent of costs and services furnished under the contract.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">11.</td>
<td class="LabelValue" align="left" height="32">I understand that the incentive payment requested using my National Provider Identifier (NPI) number will be made directly to the Tax ID Number (TIN) that was indicated during the registration process.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">12.</td>
<td class="LabelValue" align="left" height="32">I am not currently suspended, terminated, or excluded from the Medical Assistance Program by any state or by the U.S. Department of Health and Human Services.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">13.</td>
<td class="LabelValue" align="left" height="32">I agree to comply with all policies and procedures of the Medical Assistance Program. I also agree that all disputes, including overpayments, may be adjudicated in administrative proceedings convened under Act No. 280 of the Public Acts of 1939, as amended, or in a court of competent jurisdiction. I further agree to reimburse the Medical Assistance Program for all overpayments, and I acknowledge that the Medicaid Audit System, which uses random sampling, is a reliable and acceptable method for determining such overpayments.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">14.</td>
<td class="LabelValue" align="left" height="32">I agree to comply with the privacy and confidentiality provisions of any applicable laws governing the use and disclosure of protected health information, including the privacy regulations adopted by the U.S. Department of Health and Human Services under the Health Insurance Portability and Accountability Act of 1996 (HIPAA), and Public Acts 104-191 (45 CFR Parts 160 and 164, Subparts A and E). I also agree to comply with the HIPAA security regulations, as applicable, for electronic protected health information by the compliance date, which is currently April 21, 2005 (45 CFR Parts 160 and 164, Subparts A and C).</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">15.</td>
<td class="LabelValue" align="left" height="32">This Agreement shall be governed by the laws of the State of Michigan and applicable federal law including, but not limited to, the Health Insurance Portability and Accountability Act of 1996 (HIPAA).</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">16.</td>
<td class="LabelValue" align="left" height="32">The provisions of this Agreement are severable. If any provision is held or declared to be illegal, invalid or unenforceable, the remainder of the Agreement will continue in full force and effect as though the illegal, invalid or unenforceable provision had not been contained in this Agreement.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">17.</td>
<td class="LabelValue" align="left" height="32">Failure or delay on the part of either party to exercise any right, power, privilege, or remedy in this Agreement will not constitute a waiver. No provision of this Agreement may be waived by either party except in writing and signed by an authorized representative of the party requesting the waiver.</td>
</tr>
<tr valign="center">
<td class="Label" align="left" width="14%" colspan="2" height="32"></td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">18.</td>
<td class="LabelValue" align="left" height="32">If the nursing facility named on the Medical Assistance Provider Enrollment & Trading Partner Agreement is sold, the seller will notify MDCH of the sale at least ninety (90) days prior to the expected sale date. Further, it is understood that the sale will not be recognized for reimbursement purposes under the Medical Assistance Program until ninety (90) days after such notification. Provisions of 42 CFR 413.135(f) will be retrospectively satisfied at that time. Any exception must be approved in writing by MDCH. The new owner/provider must receive Medicare certification for all Medicaid-only beds in the facility within one year from the date of purchase of an operating nursing facility or from the date of reopening a previously closed nursing facility.</td>
</tr>
<tr valign="center">
<td class="Label" align="middle" width="14%" colspan="2" height="32">Medical Assistance Provider - Employer/Employee Conditions</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">19.</td>
<td class="LabelValue" align="left" height="32">The applicant is employed by the business listed, now referred to as the "employer", to provide Medical Assistance Program services to eligible beneficiaries at the service address listed.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">20.</td>
<td class="LabelValue" valign="top" align="left" height="32">The employer and the applicant shall advise MDCH within thirty (30) days after any change(s) in the employment relationship.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">21.</td>
<td class="LabelValue" align="left" height="32">The employer and the applicant agree to be jointly and severally liable for any overpayments billed and paid under Act No. 280 of the Public Acts of 1939, as amended, for services provided by the applicant to eligible beneficiaries.</td>
</tr>
<tr valign="center">
<td class="Label" align="middle" width="14%" colspan="2" height="32">Trading Partner Provisions</td>
</tr>
<tr valign="center">
<td class="Label" align="left" width="14%" colspan="2" height="32">The MDCH and its Trading Partner desire to facilitate the exchange of healthcare transactions ("Transactions") by electronically transmitting and receiving data in agreed formats in substitution for conventional paper-based documents.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">1.</td>
<td class="LabelValue" align="left" height="32">Companion Documents; Standards; Other Documentation. MDCH makes available certain inbound and outbound Electronic Data Interchange (EDI) transaction sets/formats and associated version. From time to time during the term of this Agreement, MDCH may modify supported transaction sets/formats. In submitting Transactions to MDCH, the Trading Partner agrees to conform to MDCH-issued provider publications and MDCH Companion Guides as amended from time to time. The MDCH Companion Guides, incorporated by reference herein, contain specific instructions for conducting each Transaction and as such supplement Implementation Guides issued under the Standards for Electronic Transactions mandated by the Health Insurance Portability and Accountability Act of 1996 (HIPAA) as amended. The MDCH Companion Guides are not intended to be complete billing instructions and do not alter or replace applicable physician guides or other healthcare provider billing publications issued by MDCH or by other third party payers. The Trading Partner agrees to comply with the requirements set forth in the applicable MDCH Companion Guides. The Trading Partner, or its vendor, or other authorized technical representative responsible for EDI software will document Trading Partner Information, data formats and related versions, trading partner identifiers, and other information MDCH requires to receive and transmit specific Transactions supported by MDCH.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">2.</td>
<td class="LabelValue" align="left" height="32">Support. 
As to software, equipment, and services associated with each party's performance under this Agreement, the parties agree to provide support services sufficient for Transactions to be exchanged. Each party will assist the other in establishing and/or maintaining support procedures, and will complete appropriate problem determination procedures prior to contacting the other with a support related matter. The parties agree to use all commercially reasonable efforts to avoid and resolve performance and unavailability issues. Each party will perform remedial action, as requested by the other, to assist in problem resolution. Each party, at its own expense, shall provide and maintain the equipment, software, services, and testing necessary to effectively and reliably transmit and receive transactions.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">3.</td>
<td class="LabelValue" align="left" height="32">Data Retention. 
MDCH will log all Transactions for the purpose of problem investigation, resolution, and servicing. The Trading Partner is responsible for maintaining and retaining its own records of data submitted to MDCH. Trading Partners who are healthcare providers will ensure that electronic healthcare claims submitted to MDCH can be readily associated and identified with the correct patient medical and business office records, and that these records are maintained in a manner that permits review, and for the time period as may be required by MDCH or other third party payer responsible for claim payment.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">4.</td>
<td class="LabelValue" align="left" height="32">Proper Receipt and Verification for Transactions. 
Upon proper receipt of any ANSI ASC X12N Standard Transaction, the receiving party shall promptly and properly transmit a functional acknowledgement in return, unless otherwise specified. The functional and interchange acknowledgements must be accepted and reviewed, when applicable, to confirm the receipt of a Transaction. The ability to send or receive functional acknowledgements is applicable only to ANSI ASC X12N Standard Transactions. Additionally, MDCH originated outbound Transactions must be accepted and reviewed, when appropriate, to obtain MDCH's response to specific inbound Transactions. The acknowledging party does not attest to the accuracy of the data contained in the transmission; rather, it only confirms receipt of the transmission.</td>
</tr>
<tr valign="center">
<td class="Label" valign="top" nowrap align="right" width="1%" height="32">5.</td>
<td class="LabelValue" align="left" height="32">Liability. 
MDCH shall not be responsible to the Trading Partner nor anyone else for any damages caused by loss, delay, rejection, or any misadventure affecting such electronic information. In addition, MDCH shall be excused from performing any EDI servi

You cannot use string literal of more than 4000 characters in an Oracle SQL statement. I'm not going to count that string you so rudely posted but I presume it is longer than that figure. You'll need to use a variable instead.
declare
 c clob := '<your vast XML doc here>';
begin
 update PRVDR_ENRLMNT_AGREEMENT B set b.terms= c
 where ....
{code}
Cheers, APC

How to handle the quotes('') in the procedure?

Hi all,
I have been struggling with an issue in the procedure. Let us go to the functionality of the preocedure.
I am passing a parameter that has text like
' INDIA,BANGALORE,"INOX,BLR","THILAK NAGAR,JAYA NAGAR "4TH 'T' BLOCK,BANGALORE",560030'
Here, INDIA = country field
BANGALORE = city field
INOX,BLR = Theatre field
THILAK NAGAR,JAYA NAGAR "4TH 'T' BLOCK,BANGALORE = address field
560030 = pin field
I want to load these fields into the table thru procedure. Here the issue is if any field value come with quotes(") inside the quotes like above address field. Since , please guide me how to handle that quotes while identifying the field value for either or address field or some other one.
Table structure:
country varchar2(100 char)
city varchar2(100 char)
theatre varchar2(100 char)
address varchar2(2000 char)
pin NUMBER
Procedure Code:
create or replace
PROCEDURE prc_rollout_upload( p_text VARCHAR2 )
AS
v_quote_ind NUMBER := 0;
v_first_pos NUMBER := 0;
v_end_pos NUMBER := 0;
v_text_data varchar2(32767 CHAR) := p_text;
v_text_data1 varchar2(32767 CHAR);
v_text_arr_ind NUMBER := 0;
v_quote_pos NUMBER := 0;
v_comma_pos NUMBER := 0;
type text_rec IS RECORD(country VARCHAR2(20 CHAR),
CITY VARCHAR2(1000 CHAR),
exhibitor VARCHAR2(1000 CHAR),
address VARCHAR2(10000 CHAR),
PIN varchar2(6)
type v_text_tab is table of text_rec;
v_text_array v_text_tab := v_text_tab();
BEGIN
-- Fetch the values from the string to a PL/SQL table
v_text_data1 := v_text_data;
v_text_arr_ind := v_text_arr_ind + 1;
v_text_array.extend(v_text_arr_ind);
-- Country
IF (INSTR(v_text_data1, CHR(34)) > 0 )
THEN
v_quote_ind := INSTR(v_text_data1, CHR(34));
v_first_pos := INSTR(v_text_data1, CHR(34));
v_end_pos := INSTR(v_text_data1, CHR(34),1,2);
v_text_array(v_text_arr_ind).country := SUBSTR(v_text_data1,v_first_pos+1,v_end_pos-2);
--DBMS_OUTPUT.PUT_LiNE(v_text_array(v_text_arr_ind).country);
v_text_data1 := SUBSTR(v_text_data1,v_end_pos+2);
--DBMS_OUTPUT.PUT_LiNE(v_text_data1);
END IF;
IF ( v_quote_ind = 0 ) THEN
v_text_array(v_text_arr_ind).country := SUBSTR(v_text_data1,1,INSTR(v_text_data1,CHR(44))-1);
--DBMS_OUTPUT.PUT_LiNE(v_text_array(v_text_arr_ind).country);
v_text_data1 := SUBSTR(v_text_data1,INSTR(v_text_data1,CHR(44))+1);
-- DBMS_OUTPUT.PUT_LiNE(v_text_data1);
v_first_pos := 0;
v_end_pos := 0;
v_quote_ind := 0;
END IF;
-- City
v_quote_pos := INSTR(v_text_data1,CHR(34));
v_comma_pos := INSTR(v_text_data1,CHR(44));
IF ( v_quote_pos < v_comma_pos )
THEN
v_quote_ind := INSTR(v_text_data1, CHR(34));
v_first_pos := INSTR(v_text_data1, CHR(34));
v_end_pos := INSTR(v_text_data1, CHR(34),1,2);
v_text_array(v_text_arr_ind).city := SUBSTR(v_text_data1,v_first_pos+1,v_end_pos-2);
--DBMS_OUTPUT.PUT_LiNE(v_text_array(v_text_arr_ind).city);
v_text_data1 := SUBSTR(v_text_data1,v_end_pos+2);
--DBMS_OUTPUT.PUT_LiNE(v_text_data1);
v_quote_pos := 0;
v_comma_pos := 0;
END IF;
IF ( v_quote_pos > v_comma_pos ) THEN
v_text_array(v_text_arr_ind).city := SUBSTR(v_text_data1,1,INSTR(v_text_data1,CHR(44))-1);
-- DBMS_OUTPUT.PUT_LiNE(v_text_array(v_text_arr_ind).city);
v_text_data1 := SUBSTR(v_text_data1,INSTR(v_text_data1,CHR(44))+1);
--DBMS_OUTPUT.PUT_LiNE(v_text_data1);
v_first_pos := 0;
v_end_pos := 0;
v_quote_ind := 0;
v_quote_pos := 0;
v_comma_pos := 0;
END IF;
-- Exhibitor
v_quote_pos := INSTR(v_text_data1,CHR(34));
v_comma_pos := INSTR(v_text_data1,CHR(44));
IF ( v_quote_pos < v_comma_pos )
THEN
v_first_pos := INSTR(v_text_data1, CHR(34));
v_end_pos := INSTR(v_text_data1, CHR(34),1,2);
v_text_array(v_text_arr_ind).exhibitor := SUBSTR(v_text_data1,v_first_pos+1,v_end_pos-2);
--DBMS_OUTPUT.PUT_LiNE(v_text_array(v_text_arr_ind).exhibitor);
v_text_data1 := SUBSTR(v_text_data1,v_end_pos+2);
--DBMS_OUTPUT.PUT_LiNE(v_text_data1);
v_quote_pos := 0;
v_comma_pos := 0;
END IF;
IF ( v_quote_pos > v_comma_pos ) THEN
v_text_array(v_text_arr_ind).exhibitor := SUBSTR(v_text_data1,1,INSTR(v_text_data1,CHR(44))-1);
--DBMS_OUTPUT.PUT_LiNE(v_text_array(v_text_arr_ind).exhibitor);
v_text_data1 := SUBSTR(v_text_data1,INSTR(v_text_data1,CHR(44))+1);
-- DBMS_OUTPUT.PUT_LiNE(v_text_data1);
v_first_pos := 0;
v_end_pos := 0;
v_quote_pos := 0;
v_comma_pos := 0;
END IF;
--Address
v_quote_pos := INSTR(v_text_data1,CHR(34));
v_comma_pos := INSTR(v_text_data1,CHR(44));
IF ( v_quote_pos < v_comma_pos )
THEN
v_first_pos := INSTR(v_text_data1, CHR(34));
v_end_pos := INSTR(v_text_data1, CHR(34),1,2);
v_text_array(v_text_arr_ind).address := SUBSTR(v_text_data1,v_first_pos+1,v_end_pos-2);
--DBMS_OUTPUT.PUT_LiNE(v_text_array(v_text_arr_ind).address);
v_text_data1 := SUBSTR(v_text_data1,v_end_pos+2);
--DBMS_OUTPUT.PUT_LiNE(v_text_data1);
v_quote_pos := 0;
v_comma_pos := 0;
END IF;
IF ( v_quote_pos > v_comma_pos ) THEN
v_text_array(v_text_arr_ind).address := SUBSTR(v_text_data1,1,INSTR(v_text_data1,CHR(44))-1);
--DBMS_OUTPUT.PUT_LiNE(v_text_array(v_text_arr_ind).address);
v_text_data1 := SUBSTR(v_text_data1,INSTR(v_text_data1,CHR(44))+1);
-- DBMS_OUTPUT.PUT_LiNE(v_text_data1);
v_first_pos :=0;
v_end_pos := 0;
v_quote_pos := 0;
v_comma_pos := 0;
END IF;
--PIN
v_quote_pos := INSTR(v_text_data1,CHR(34));
v_comma_pos := INSTR(v_text_data1,CHR(44));
IF ( v_quote_pos < v_comma_pos )
THEN
v_first_pos := INSTR(v_text_data1, CHR(34));
v_end_pos := INSTR(v_text_data1, CHR(34),1,2);
v_text_array(v_text_arr_ind).pin := SUBSTR(v_text_data1,v_first_pos+1,v_end_pos-2);
--DBMS_OUTPUT.PUT_LiNE(v_text_array(v_text_arr_ind).pin);
v_text_data1 := 0;
--DBMS_OUTPUT.PUT_LiNE(v_text_data1);
v_quote_pos := 0;
v_comma_pos := 0;
END IF;
IF ( v_comma_pos IS NULL OR v_quote_pos > v_comma_pos ) THEN
v_text_array(v_text_arr_ind).pin := v_text_data1;
--DBMS_OUTPUT.PUT_LiNE(v_text_array(v_text_arr_ind).pin);
v_text_data1 := 0;
--DBMS_OUTPUT.PUT_LiNE(v_text_data1);
v_first_pos := 0;
v_end_pos := 0;
v_quote_pos := 0;
v_comma_pos := 0;
END IF;
EXCEPTION
WHEN others then
DBMS_OUTPUT.PUT_LiNE(SUBSTR(SQLERRM,1,200));
END prc_rollout_upload;
Oracle version :
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
Your help would be highly appreciated !!!
Regards,
Vissu.....

To start with Try this:
SQL> ed
Wrote file afiedt.buf
1 declare
2 v_var VARCHAR2(10000) := 'INDIA,BANGALORE,"INOX,BLR","THILAK NAGAR,JAYA NAGAR ';
3 v_delim VARCHAR2(1) := ',';
4 v_enclose VARCHAR2(1) := '"';
5 v_val VARCHAR2(1000) := NULL;
6 begin
7 v_var := v_var||'"4TH T BLOCK,BANGALORE",500365'||',';
8 FOR I IN 1..5 LOOP
9 v_val := CASE WHEN SUBSTR(v_Var,1,1) <> '"' THEN
10 SUBSTR(v_Var,1,INSTR(v_Var,',',1,1)-1)
11 ELSE
12 SUBSTR(v_Var,2,INSTR(v_Var,'",',1,1) - INSTR(v_Var,'"',1,1) - 1)
13 END;
14 v_Var := CASE WHEN SUBSTR(v_Var,1,1) <> '"' THEN
15 SUBSTR(v_Var,INSTR(v_Var,',',1,1) + 1)
16 ELSE
17 SUBSTR(v_Var,INSTR(v_Var,'",',1,1) + 2)
18 END;
19 dbms_output.put_line(v_Val);
20 END LOOP;
21* end;
SQL> /
INDIA
BANGALORE
INOX,BLR
THILAK NAGAR,JAYA NAGAR "4TH T BLOCK,BANGALORE
500365
PL/SQL procedure successfully completed.
SQL>

Using the Dollar($) Sign in a User Function Implementation

Hi All,
Just a quick question: how could you use a dollar($) sign in the implementation (Oracle) of a user function? I'm asking because the table name that I'm using in the implementation happens to contain the dollar sign (I$_FACT_SALES) and from the results I'm getting now, ODI reads the $ as reference to a variable, therefore removing the $-sign from my table name upon execution (I_FACT_SALES). Is there something like a backslash or some other character that could be inserted before the $ so it would register as part of the table name?
Any response would be greatly appreciated.
Thanks very much,
Marco

You may have 3 options:
1.) Try using the tablename in quotes "MY$TABLE" or may be MY$$TABLE using double $ symbol
or
2.) I found this code snippet : odiRef.getInfo( \\u0022DEST_WORK_SCHEMA\\u0022 )+\\u0022.\\u0022,\\u0022\\u0022)?. So on these lines you can use \\u0022 as a symbol for "
You can see similar problem/solution/explanation in
Re: Regular Expression wierdness - problem with $ character
or
3.) Change the Work Tables Prefix in Topology Manager > Physical Schema > Your_Schema
from E$_ , C$_ , I$_ to something like ERR_ , SRC_ , INT_
Edited by: Ace2 on Dec 2, 2009 9:57 AM

How to use the single sign-on cookie

I have a web dynpro application that's triggered by a button press in the gui. It was set up to use the 'WDY_EXECUTE_IN_PLACE' function module. However, I recently attended a Web Dynpro course and was told that's not the correct way to do it - I should be just calling the url and passing any parameters in the url string. I set about changing this today and I'm now using cl_gui_frontend_services=>execute to execute the url but now I'm being asked to log on to access the application - previously I didn't have to do this.
I'm told this is something to do with the single sign-on cookie MYSAPSS02. According to our basis team this is already set but it looks like I need to do something extra - like retrieve it and/or send it to the application somehow. I've had a search around the forum but haven't come up with the answer yet. Can someone point me in the right direction please ?
thanks,
Malcolm.

If you use cl_gui_frontend_services=>execute you won't get single sign on. Instead use CL_GUI_HTML_VIEWER. This class has the special logic to generate the SSO ticket (method ENABLE_SSO). You can place the control in a dummy container object (not actually on the screen) and then use the DETACH_URL_IN_BROWSER method to launch the browser separately from the SAPGUI.

Problem inserting the euro sign using JDBC

Inserting the euro sign into a char field of a DB2 table using JDBC results in getting a control char (SUBSTITUTE / ASCII 26) in the field, instead of the expected euro sign.
I tried both the "old" DB2 driver (db2driver.zip) and the new one (db2jcc.jar). I get the same result in both cases. I also thought this might be a problem of different character sets between the client machine and the database server, but the problem doesn't occur if i use non java third party tools (like WinSQL) to insert the euro sign...
Any idea?
Colargol

Something like below will verify that you can send the character to the database, store it, and return it with java. You need to run this in a Unicode compliant tool, like Eclipse 3.0.
               //Euro character in Unicode is below, insert it into DB.
               int myCharacterInteger = 0x20AC;
               String myChar = new String(new char[]{(char) myCharacterInteger});
               System.out.println("My character inbound is " + myChar);
               pstmt.setString(1, myChar);
               pstmt.execute();
               pstmt.close();
               //Euro character in Unicode is below, insert it into DB.
               PreparedStatement pstmt2 = dbc
                         .prepareStatement("select * from tmp_junk");
               ResultSet rs = pstmt2.executeQuery();
               while (rs.next())
                    System.out
                              .println("My character from DB is " + rs.getString(1));If that returns the character properly from DB, examine how the character is being input into java, you may inadvertently be changing character sets there.
PS - that may not be right character, but you get the idea. We don't use Euros much where I work. ;-)
-Scott
http://www.swiftradius.com

What does the plus sign after certian items mean? i.e. ""+Math.round(+s);

Hello,
I was wondering what the plus sign does in the following line of code: ""+Math.round(+s);
What does it do to +s ?
What does it do to +Math.round ?
Thanks
Linda

So basically the following code:
" " +Math.round(+s);
makes sure that the value of s is numeric, rounds it up and then converts the number to a string.
Thank you GKaiseril
Linda

Deleting the first word in a string

hi! i'm learning regex and with this code i would like to
1) print a string (from "Hi my name is SandraPandra. do not print this")
2) remove the first word and print the new, shorter string
3) remove the first word in the new, shorter string and print the newer and shorter string
4) continue this until it hits a non-character (e.g period, colon, quotation marks etc)
does anyone here know how i should change my code in order to achieve this?
here's my code:
class Testar {
public static void main(String[] args) {
      String partDesc = "Hi my name is SandraPandra. do not print this.";
      do {
           System.out.println(partDesc);
          partDesc = partDesc.replaceFirst("^(\\w+)\\s+","");}
          while (partDesc.equals("\\w") == true);
           if (partDesc.equals("\\w") == false){ //this is where something goes wrong
          System.out.println("found a full stop!");}
} the outcome now is:
Hi my name is SandraPandra. do not print this.
found a full stop!
Thank you in advance!

I answered this question in your previous thread. (Sorry, I didn't realize "I'm going to bed now" was a code for "I won't be reading this thread any more". ^_^ )
I would also like to point out that it's bad form to write conditions like if ( booleanExpression == true ) It's gratuitously verbose, and it creates the potential for subtle bugs. Suppose the boolean expression is a non-final boolean variable, and you accidentally leave out one of the equals signs: if ( booleanVariable = true ) An assignment statement evaluates to the value that was assigned, so this "condition" will always be true.

Cannot slice values with quotes sign

Hi all,
for some unknown reason, I cannot slice values with quotes sign on a slicer.
It does not work on any of the computers in my workplace!
Why is that? How can I fix this?
I work with Excel2010
Thanks,
Marina

Hi Marina
Check data format in PowerPivot model. Should be text. If it not helps please give examples how the model and slicer looks like.
G.

Regular Expression - Extract words before the PLUS Sign ?

Dear All,
I had many words with having a symbol plus. I need to extract the words before the plus sign.
I can able to do this by using String.indexOf or String.contains. But i like to know is there is any way to do this using Regular Expression.
sample string
Kathire+san Output Kathire
World+islike Output World
Thanks,
J.Kathir

Here's one way.
import java.util.regex.Pattern;
String input = "abc+def";
Pattern pat = pat.compile("\\+");
String beforePlus = pat.split(input)[0];
Sun's Regular Expression Tutorial for Java
Regular-Expressions.info

The quote sign in a String

Similar Messages

Maybe you are looking for