The schedule in Power BI report refresh error with the powerpivot or powerview with SQL Analysis services as data source
In the Power BI Admin Centre, the data sources that cannot be setup with Analysis services, and it has the error to schedule the powerpivot or powerview report to have data refresh. The error is "我們無法重新整理此報表中的資料來源種類。" - english, "We
can not rearrange the source of information in this report types ." We would like to know the power bi schedule function can support SQL analysis service or not. Please advise. Thanks.
Winsee
It is not currently supported. You might be able to create a linked server in SQL to be a proxy for the connection and enable scheduled refresh if you are desperate.
https://support.office.com/en-US/Article/Supported-data-sources-cb69a30a-2225-451f-a9d0-59d24419782e#__supported_data_sources
http://artisconsulting.com/Blogs/GregGalloway
Similar Messages
-
Error with JNDI when creating new data source
Hi :
This weekend, while adding new applications to the production environment we ran into a problem where the JNDI tree of the new managed servers was unreachable.
The error message we saw was:
<1364066840022> <BEA-149231> <Unable to set the activation state to true for the application 'EOI'.
weblogic.application.ModuleException:
at weblogic.jdbc.module.JDBCModule.activate(JDBCModule.java:349)
at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:107)
at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:411)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:74)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:66)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:16)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:162)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:42)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
weblogic.common.ResourceException: is already bound
at weblogic.jdbc.common.internal.RmiDataSource.start(RmiDataSource.java:387)
at weblogic.jdbc.common.internal.DataSourceManager.createAndStartDataSource(DataSourceManager.java:136)
at weblogic.jdbc.common.internal.DataSourceManager.createAndStartDataSource(DataSourceManager.java:97)
at weblogic.jdbc.module.JDBCModule.activate(JDBCModule.java:346)
at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:107)
at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:411)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:74)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:66)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:16)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:162)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:42)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
We traced the issue to a new data source that was added were we found that along with the the expected jndi name entry in the jdbc xml file, there were two blank entries:
<jndi-name>weblogic.jdbc.DataSource.EOI</jndi-name>
<jndi-name></jndi-name>
<jndi-name></jndi-name>
The data source was deleted, consoles restarted, the data source recreated and the issue occured again. To get by the issue we had to manually remove the blank tags from the xml file.
We created 2 new data sources, and it only happened on the one. The same data source each time. Additionally, this issue did not occur when these changes were made in our lower (development, qa) regions.
The version is the same in all three regions.
WebLogic Version:
WebLogic Server Temporary Patch for 9324911 Wed Feb 03 22:38:01 PST 2010
WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967
Is this a known issue? And if so, is there a way to avoid it, other than to start constantly checking the newly created XML files?
Thank you
tedYes, this is a common issue and documented in Oracle Docs:
WebLogic Server: Getting "weblogic.common.ResourceException: is already bound" exception with JDBC JNDI name (Doc ID 1154250.1)
The only fix is that you need to remove the empty value entries.
Cheers!!
AJ -
Hi ! I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an Apple's USA e.mail i can use ? Thanks.
There is a link at the bottom of this page. http://www.apple.com/contact/
-
Good morning. I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an Apple's USA e.mail i can use ? Thanks.
There is a link at the bottom of this page. http://www.apple.com/contact/
-
What are the steps need to be taken care for MM data sources while extrac
what are the steps need to be taken care for MM data sources while extracting from R/3 tables
and please provide the Steps involved in R/3 side
thnaks
RachaHi,
For Inventory Management, you can have a look at the following link.
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328] -
Hi,
Could anyone tell me when i open the webi report,its working fine but when refresh the same report it takes more than 1 hour time.
Plz advise me ASAP.
Regards,hi,
When you open the WEBI report, you are seeing the saved data probably.
Once you refresh the report for latest data it is taking long time to get the data from data source.
Possible steps that can be taken are as follows
1) Open Designer, File -> Parameters -> Controls
Increase the values for the following
Limit size of result set to:
Limit execution time to:
and export the Universe
2) Login to CMC -> Servers -> WebIntelligenceProcessingServer -> Web Intelligence Processing Service
Increase the values for the parameters
Restart the 'WebIntelligenceProcessingServer' server
3) Also, verify the DB is up and running
Regards,
Vamsee -
PowerPivot refresh error with data feed from sharepoint list with empty exception information
Hi,
My Powpivot refreshing error seems to be different from what others already experienced.
Scenario:
Constructed an external data source in the format of Http://<server_IP>/sites/<mysitecollection>/_vti_bin/listdata.svc
selected one table with some of the needed columns in the next step
Create calculate colums etc.
Create pivot tables etc.
All worked well offline
Upload the workbook into PowerPivot Gallery
Reference it from a page through Excel Web Service webpart allowing manual refresh
The refresh always reports failure with the named external data source
I opend the log file in C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS and located the following error messages:
ASPPHOST::ShowEngineError: Out of line object 'DataSource', referring to ID(s) 'f8939b694cae', has been specified but has not been used。The following exception occurred while the managed IDbCommand interface was being used: .
Please note in the above message, NO detailed exception message was given. In other words,
the exception information is empty.
I checked as many things as I possibly could includin the security accounts etc. All seem to be right. But this empty exception got me stuck here.
What could possibly go wrong? Any help will be appreciated.
Thanks.Hello,
Here is a good article regarding Where to get information about data refresh failures for your reference, please see:
http://social.technet.microsoft.com/wiki/contents/articles/3870.troubleshooting-powerpivot-data-refresh.aspx
In addition, which credential option you're configured for the PowerPivot data refresh in SharePoint farm? You can go through the following articles regarding configure the PowerPivot data refresh:
Configure the PowerPivot Unattended Data Refresh Account (PowerPivot for SharePoint):
http://technet.microsoft.com/en-us/library/ff773327.aspx
Configure Stored Credentials for PowerPivot Data Refresh (PowerPivot for SharePoint):
http://technet.microsoft.com/en-us/library/ee210671.aspx
Hope this helps.
Regards,
Elvis Long
TechNet Community Support -
Report DW error with CSS position
To the Adobe staff
I use this forum cause I can't find where the F... to report an error!
There is an error in Dreamweaver CS4 french (canadian) version.
When you create a css style, the position tab, the fonction fixed has been translated and should not.
So right now, you read "fixe" instead of "fixed"You can report bugs here...
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform -
Netstat not reporting input errors with packets that have bad checksums ?
Greetings,
Is netstat not reporting any checksum errors ? I have a number of Macs reporting checksum errors when sniffing the local net. I would think that these should be reported by netstat as input errors, or collisions right ?
But it doesn't currently. See below for sample, its occurring across protocols, tcp, and udp. Usually this error is a bad ethernet port or cabling, and sometimes a sw issue. Working on eliminating the switches, router, and dsl modem by doing more testing.
But is netstat broke ? I havent seen any errors from netstat since @ 3yrs ago.
length 64, bad cksum 0 (->f9fe)!)
One other question, can one monitor firewire 400/800 ports or usb with netstat ? Its not listed with man pages or netstat -h
Thanks in advanceIm am using two commands to view the data;
netstat -I en0 2;
(no errors in or out)
and tcpdump with the verbose -v argument
( reports the cksum ( these are CRC's right, not IP header checksum ? )
At the very bottom is the netstat -s output, otherwise a snippet of tcpdump ; replaced the IP's with xxxx's to protect the innocent
Thanks for your help.....
===========================
18:13:37.101690 IP (tos 0x0, ttl 64, id 8134, offset 0, flags [DF], proto TCP (6), length 957, *bad cksum 0 (->68d8)!)* xxxxxxxxxx > xxxxxxxxxxxxxxx: P 8689:9594(905) ack 1 win 65535 <nop,nop,timestamp 1438111158 3084046213>
18:13:37.136653 IP (tos 0x0, ttl 57, id 26778, offset 0, flags [DF], proto TCP (6), length 52) xxxxxxxxxx > xxxxxxxxxxxxxxx: ., cksum 0xd4bc (correct), ack 5793 win 17376 <nop,nop,timestamp 3084046248 1438111158>
18:13:37.172381 IP (tos 0x0, ttl 57, id 26779, offset 0, flags [DF], proto TCP (6), length 52) xxxxxxxxxx > xxxxxxxxxxxxxxx: ., cksum 0xc3a0 (correct), ack 7241 win 20272 <nop,nop,timestamp 3084046284 1438111158>
18:13:37.207358 IP (tos 0x0, ttl 57, id 26780, offset 0, flags [DF], proto TCP (6), length 52) xxxxxxxxxx > xxxxxxxxxxxxxxx: ., cksum 0xb285 (correct), ack 8689 win 23168 <nop,nop,timestamp 3084046319 1438111158>
18:13:37.230968 IP (tos 0x0, ttl 57, id 26781, offset 0, flags [DF], proto TCP (6), length 52) xxxxxxxxxx > xxxxxxxxxxxxxxx: ., cksum 0xa395 (correct), ack 9594 win 26064 <nop,nop,timestamp 3084046342 1438111158>
18:13:37.313545 IP (tos 0x0, ttl 57, id 26782, offset 0, flags [DF], proto TCP (6), length 1500) xxxxxxxxxx > xxxxxxxxxxxxxxx: . 1:1449(1448) ack 9594 win 26064 <nop,nop,timestamp 3084046415 1438111158>
18:13:37.322422 IP (tos 0x0, ttl 57, id 26783, offset 0, flags [DF], proto TCP (6), length 1500) xxxxxxxxxx > xxxxxxxxxxxxxxx: . 1449:2897(1448) ack 9594 win 26064 <nop,nop,timestamp 3084046415 1438111158>
18:13:37.322440 IP (tos 0x0, ttl 64, id 8135, offset 0, flags [DF], proto TCP (6), length 52, *bad cksum 0 (->6c60)!)* xxxxxxxxxx > xxxxxxxxxxxxxxx ., *cksum 0xaec3 (incorrect (-> 0xff42)*, ack 2897 win 65160 <nop,nop,timestamp 1438111159 3084046415>
18:13:37.331285 IP (tos 0x0, ttl 57, id 26784, offset 0, flags [DF], proto TCP (6), length 1500) xxxxxxxxxx > xxxxxxxxxxxxxxx: . 2897:4345(1448) ack 9594 win 26064 <nop,nop,timestamp 3084046415 1438111158>
18:13:37.334407 IP (tos 0x0, ttl 57, id 26785, offset 0, flags [DF], proto TCP (6), length 646) xxxxxxxxxx > xxxxxxxxxxxxxxx: P 4345:4939(594) ack 9594 win 26064 <nop,nop,timestamp 3084046415 1438111158>
18:13:37.334421 IP (tos 0x0, ttl 64, id 8136, offset 0, flags [DF], proto TCP (6), length 52, *bad cksum 0 (->6c5f)!*) xxxxxxxxxx > xxxxxxxxxxxxxxx: ., *cksum 0xaec3 (incorrect (-> 0xf5d1)*, ack 4939 win 65535 <nop,nop,timestamp 1438111159 3084046415>
===============================
netstat -s
tcp:
7470 packets sent
2868 data packets (671900 bytes)
0 data packets (0 bytes) retransmitted
0 resends initiated by MTU discovery
3534 ack-only packets (101 delayed)
0 URG only packets
0 window probe packets
657 window update packets
411 control packets
7918 packets received
3225 acks (for 672008 bytes)
185 duplicate acks
0 acks for unsent data
4489 packets (2652174 bytes) received in-sequence
7 completely duplicate packets (7347 bytes)
0 old duplicate packets
0 packets with some dup. data (0 bytes duped)
291 out-of-order packets (412273 bytes)
0 packets (0 bytes) of data after window
0 window probes
1 window update packet
1 packet received after close
0 discarded for bad checksums
0 discarded for bad header offset fields
0 discarded because packet too short
207 connection requests
12 connection accepts
0 bad connection attempts
0 listen queue overflows
219 connections established (including accepts)
231 connections closed (including 9 drops)
2 connections updated cached RTT on close
2 connections updated cached RTT variance on close
0 connections updated cached ssthresh on close
0 embryonic connections dropped
3222 segments updated rtt (of 3193 attempts)
2 retransmit timeouts
0 connections dropped by rexmit timeout
0 persist timeouts
0 connections dropped by persist timeout
0 keepalive timeouts
0 keepalive probes sent
0 connections dropped by keepalive
2199 correct ACK header predictions
4128 correct data packet header predictions
0 SACK recovery episodes
0 segment rexmits in SACK recovery episodes
0 byte rexmits in SACK recovery episodes
0 SACK options (SACK blocks) received
275 SACK options (SACK blocks) sent
0 SACK scoreboard overflow
udp:
360 datagrams received
0 with incomplete header
0 with bad data length field
0 with bad checksum
21 dropped due to no socket
65 broadcast/multicast datagrams dropped due to no socket
0 dropped due to full socket buffers
0 not for hashed pcb
274 delivered
390 datagrams output
ip:
8278 total packets received
0 bad header checksums
0 with size smaller than minimum
0 with data size < data length
0 with ip length > max ip packet size
0 with header length < data size
0 with data length < header length
0 with bad options
0 with incorrect version number
0 fragments received
0 fragments dropped (dup or out of space)
0 fragments dropped after timeout
0 packets reassembled ok
8278 packets for this host
0 packets for unknown/unsupported protocol
0 packets forwarded (0 packets fast forwarded)
0 packets not forwardable
0 packets received for unknown multicast group
0 redirects sent
7869 packets sent from this host
0 packets sent with fabricated ip header
0 output packets dropped due to no bufs, etc.
8 output packets discarded due to no route
0 output datagrams fragmented
0 fragments created
0 datagrams that can't be fragmented
0 tunneling packets that can't find gif
0 datagrams with bad address in header -
"Load report failed" error with VS 2010 upgrade
I have a report system that has been running nicely for a few years. Today, I upgraded it to use the latest Crystal from Visual Studio 2010. I installed the .net framework 4.0, installed the Crystal runtime (64 bit), and updated the web site with slightly revised code to use the new stuff. Now, reports that worked yesterday fail with the 'load report failed' error. A little research shows that the file name passed to the report engine is correct (and is the same as it has always been). I see that rpt files are being created in windows\temp each time a report is requested, so it seems that the report file is being found.
The code change I made was to use the new ExportToHttpResponse method.
When deployed in development and test environments (both 32 bit). this worked perfectly. In production, however, no such luck. I wonder if I have missed a setting somewhere, or if there is something extra to do on a 64 bit server?
Does anyone have a clue for me?
More info - I found the following error in the event log:
The keycode assembly, BusinessObjects.Licensing.KeycodeDecoder.dll, cannot be loaded.
... which I thought was interesting until I noticed the same error occurs on my dev machine, where the reports are working.
I also used process monitor to check the dlls loaded on the production box, and they all seem to be the latest version. I tried using the 'modules' utility on my production box, but it did not pick up the Crystal stuff (or any of my web stuff - I wonder if it is a 32-bit only tool?).
Edited by: Ray Novak on Dec 29, 2010 5:12 PMI just tried this again with the same result. I uninstalled the previous Crystal, deleted all the old folders and reg keys I could find, then installed the new 64 bit redist package. I asigned permissions to the SAP reg key tree. I ended up with the same result: "Invalid file name". There were new files created in the temp folder for each report request, so I can tell that my.rpt files are being found.
I used process monitor to see what was happening, and here are the results that seem interesting:
RegOpenKey HKU\.DEFAULT\Software\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0 NAME NOT FOUND
RegOpenKey HKU\.DEFAULT\Software\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0 NAME NOT FOUND
IRP_MJ_CREATE C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win64_x64\secSSO.dll.2.Config NAME NOT FOUND
FASTIO_NETWORK_QUERY_OPEN C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win64_x64\SmAgentAPI.dll NAME NOT FOUND
Since it seemed to be trying to create files in the \win64_x64 folder, I allowed the process full access, but it didn't help. It was also looking for SmAgentAPI.dll which does not seem to exist on my system. -
Reporting Services: XML Data Source and Parameters
I’ve created an XML service (asmx) in ASP.Net that I want to use as a data source for an SQL Reporting Services report. The report and service work just fine if I use a Method from the service that does not have parameters. However, if I use a Method that
needs a parameter, the query/report fails. My investigation makes it seem that the parameter is not getting passed to the Method at all. (The parameter is a DateTime and it always ends up uninitialized and the WebMethod throws an exception.)
I’ve exhausted all my TechNet resources and Googled this excessively. It would seem that I am doing this correctly, based on all the examples I’ve seen, but I still can’t get it to work.
I've done a lot of different permutations, but this is where I’m at right now.
(Note: I've changed the Web Method's parameter to be a String instead of a DateTime. I did this as part of my trial-and-error process. Once I get this figured I'll return it to a DateTime.)
I'm trying to include everything here that will help you help me (see attached image). I had to obfuscate a few things (not sure if that is necessary).
See attached image:
Created Shared Data Source in SQL Report Services
Create Report Parameter (matching Web Method parameter)
Created a data set in Report Builder (with Query, and parameter - matching Web Method parameter)
Query in Data Source
<Query>
<Method Name="GetDueDateAging" Namespace="http://zzz.com/vvv">
<Parameters>
<Parameter Name="cutoffDate">
<DefaultValue></DefaultValue>
</Parameter>
</Parameters>
</Method>
<SoapAction>http://zzz.com/vvv/GetDueDateAging</SoapAction>
<ElementPath IgnoreNamespaces="true">*</ElementPath>
</Query>
This is where I needed the most help, and I don't totally understand it. But again, the parameter-less Method worked. I've tried adding different things in the <DefaultValue> tag (like @cuttoffDate and constant values), with no success.
WebMethod Code
[WebMethod]
public List<AgingInvoice> GetDueDateAging(string cutoffDate)
DateTime cd = DateTime.MinValue;
if (!DateTime.TryParse(cutoffDate, out cd))
cd = DateTime.Now;
Shared.DueDateAging aging = new Shared.DueDateAging();
return aging.GetDueDateAging(cd, Settings.Default.ConnectionString);
I've looked at every online resource that I could find, but I'm striking out right now. Any help or hints would be greatly appreciated.
Thanks.
DerrickHi Derrick,
In your case, please refer to the following method to troubleshooting this problem:
We can use Fiddler2 to monitor the HTTP post, and check whether the parameter is being sent. The Fiddler tool can helps us debug web applications by capturing network traffic between the Internet and test computers. If the parameter is being sent, please
debug the web service to ensure the method has values return.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support -
Using Web Service as Data source (Pluggable Data Source) in Oracle Reports
Anyone using Webservice as a pluggable data source in oracle 10g reports.(Report builder version:10.1.2.0.2)? We need to be able to use web service as one of the data source to create reports.Tried the following and ran into issues:
Imported the wspds.jar fle from oracle plugin exchage. When tried using it received the following error in oracle reports trace file.
04/26 22:27:22 java.lang.NoSuchMethodError: oracle.xml.parser.schema.XSDBuilder.build([Loracle/xml/parser/v2/XMLDocument;Ljava/net/URL;)Ljava/lang/Object;
By troubleshooting issue found out that xmlparserv2.jar in 10g is newer than xmlparserv2.jar in 9i. wspds.jar is using xmlparserv2.jar in 9i as it was developed and tested for 9i only. Believe there is no newer wspds.jar file developed specifically for 10g?
Is there a better/standard solution to use webservice as data source in oracle 10g reports? Does later version of oracle reports supports webservice as a data source without any additional plugins? Any suggestion would be helpful.Please provide support for the above request.
It appears that Oracle 10g reports doesn't support Web Service as pluggable data source. Is this option is available in Oracle 11g Reports or Oracle Discoverer Or OBIEE? -
Crystal Report 8.5 with SQL SERVER 2005 problems
Post Author: AREVA
CA Forum: Data Connectivity and SQL
Hi All !We have some problems with Crystal Reports version 8.5 with SQL Server 2005: 1) When we want to generate a report (using data in SQL Server 2005) we have a popup message error : "impossible to loaded pdssql.dll".2) If we want to use SQL Server 2005, which Crystal Reports version we must used ? Is there any restrictions with this connectivity with 8.5 version ?Please, let me known, all informations about SQL Server 2005 and Crystal Report 8.5.Thanks for all !Best regards AnthonyHello Kamlesh,
There is no expectation that the ActiveX viewer (RDC?) from CR8.5 will work in any version of Visual Studio .NET. There is also no expectation that the ActiveX viewer from CR8.5 will work on a machine with a 64 bit operating system.
You're using VS2008. You should migrate to the bundled edition of CR for VS2008 (v10.5), the ReportDocument object, and the .NET Windows form viewer or Web form viewer.
Sincerely,
Dan Kelleher -
Error (IES 10901) (WIS 10901) when using Excel 2010 file as data source..
Hello,
I have a annoying issue with using an excel 2010 file as a data source for a universe. Here is the background information.
Setup.
Client: Laptop running Win XP 32bit, Client tools installed with SP2 v9 (latest)
Server: Win 2008 x64, BOE 4.0 SP2 v9 (latest)
Task:
1. On Client, with information design tool, created Project, DB Connection, Data foundation using an excel source on a share
server\share\data.xlsx
2.. Published everything to Repository
3. Try to load univerise in Web Intelligence via creating a new report. I Drag accross the dimensions. When i go to preview data recieve error
Database error: [Microsoft][ODBC Excel Driver] External table is not in the expected format.. (IES 10901) (WIS 10901)
4. If i change the excel file to a 2003 format *.xls it all works correctly. Issue being that 2003 cannot hold as much data as a 2010 file so i need to use 2010.
Extra Notes:
1. Both the client and server have the latest Access drivers http://www.microsoft.com/download/en/details.aspx?id=13255
2. Both client and server have a system DSN setup using the 32bit ODBC, same DSN names to the network share.
3. The data excel source sits on the server on a share.
4. I am believing that the isssue is within the area of BOE as when you connect to the excel file via ODBC using crystal 2011, you need to right click on the connection and tick "System Tables" to be able to use the excel 2010 file. The BOE Information design tool does not seem to have this option??
Any advice with this would be great?
thanks
davidIssue Resolved:
Install
Access Database Engine 2010 Service Pack 1 on the server
http://support.microsoft.com/kb/2460011
Reboot server once completed. -
TNS: connection closed error with SQL*net
Hi all,
I've got a new installation of Oracle 11.1.0.6.0 enterprise (Linux). It works fine with direct sqlplus connections but I'm having problems with SQL*net and JDBC thin client connections.
The database is built correctly and works fine:
user@cthulhu bash[61]: sqlplus user/pwd
SQL*Plus: Release 11.1.0.6.0 - Production on Mon Aug 4 12:59:53 2008
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE 11.1.0.6.0 Production
TNS for Linux: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
SQL>
but if I try to connect using SQL*net I get errors. I have my TNS listener configured and it starts without errors, reporting the database as a service, and tnsping is fine:
user@cthulhu bash[62]: tnsping cthulhu_mar
TNS Ping Utility for Linux: Version 11.1.0.6.0 - Production on 04-AUG-2008 13:02:07
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=TCP)(HOST=192.168.2.30)(PORT=1521)) (CONNECT_DATA=(SID=mar)))
OK (10 msec)
user@cthulhu bash[63]: sqlplus user/pwd@cthulhu_mar
SQL*Plus: Release 11.1.0.6.0 - Production on Mon Aug 4 13:02:41 2008
Copyright (c) 1982, 2007, Oracle. All rights reserved.
ERROR:
ORA-12537: TNS:connection closed
Enter user-name:
In listener.log:
Mon Aug 04 13:02:41 2008
04-AUG-2008 13:02:41 * (CONNECT_DATA=(SID=mar)(CID=(PROGRAM=sqlplus)(HOST=cthulhu)(USER=marbur))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.2.30)(PORT=41754)) * establish * mar * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Linux Error: 32: Broken pipe
This is a new instance of Oracle so there is no problem with listener.log being too large (as I've seen elsewhere). I've also tried increasing PROCESSES and SESSIONS in the initSID.ora file without any impact. The listener ports are open through the firewall (and disabling it temporarily makes no difference).
Any suggestions?!
Thanks, MattThis means nothing to me, but it could to someone else......
from listener trace:
2008-08-04 16:19:05.135381 : nlpcaini:env[161] = OLDPWD=/u01/app/oracle/product/11.1.0/db_1
2008-08-04 16:19:05.135407 : nlpcaini:env[162] = ORA_NET2_DESC=12,15
2008-08-04 16:19:05.135432 : nlpcaini:env[163] = ORACLE_SPAWNED_PROCESS=1
2008-08-04 16:19:05.135465 : nlpcaini:exit
2008-08-04 16:19:05.135498 : nsc2addr:normal exit
2008-08-04 16:19:05.135536 : nsbeqaddr:entry
2008-08-04 16:19:05.135566 : nsbeqaddr:connecting...
2008-08-04 16:19:05.135603 : nsopen:entry
2008-08-04 16:19:05.135633 : nsmal:entry
2008-08-04 16:19:05.135667 : nsmal:1012 bytes at 0x81a8538
2008-08-04 16:19:05.135694 : nsmal:normal exit
2008-08-04 16:19:05.135722 : nsopenmplx:entry
2008-08-04 16:19:05.135749 : nsmal:entry
2008-08-04 16:19:05.135779 : nsmal:2020 bytes at 0x81a8930
2008-08-04 16:19:05.135804 : nsmal:normal exit
2008-08-04 16:19:05.135831 : nsiorini:entry
2008-08-04 16:19:05.135861 : nsbal:entry
2008-08-04 16:19:05.135889 : nsbgetfl:entry
2008-08-04 16:19:05.135918 : nsbgetfl:normal exit
2008-08-04 16:19:05.135966 : nsmal:entry
2008-08-04 16:19:05.135995 : nsmal:84 bytes at 0x81b3dd8
2008-08-04 16:19:05.136020 : nsmal:normal exit
2008-08-04 16:19:05.136057 : nsbal:normal exit
2008-08-04 16:19:05.136085 : nsiorini:exit (0)
2008-08-04 16:19:05.136112 : nscpxget:entry
2008-08-04 16:19:05.136139 : nscpxget:normal exit
2008-08-04 16:19:05.136168 : nsopenalloc_nsntx:nlhthput on mplx_ht_nsgbu:ctx=81a8538, nsntx=81a8930
2008-08-04 16:19:05.136196 : nsopenmplx:normal exit
2008-08-04 16:19:05.136225 : ntpcon:entry
2008-08-04 16:19:05.136253 : ntpcon:toc = 6
2008-08-04 16:19:05.136283 : ntpcon:exit
2008-08-04 16:19:05.136313 : nsopen:opening transport...
2008-08-04 16:19:05.136341 : ntpcon:entry
2008-08-04 16:19:05.136367 : ntpcon:toc = 1
2008-08-04 16:19:05.136404 : sntpcall:entry
2008-08-04 16:19:05.157048 : sntpcall:detaching from parent with additional fork
2008-08-04 16:19:05.157304 : sntpcall:hdl[IR]=17, hdl[IW]=16
2008-08-04 16:19:05.157350 : ntpcon:exit
2008-08-04 16:19:05.157390 : nserror:entry
2008-08-04 16:19:05.157428 : nsoptions:entry
2008-08-04 16:19:05.157459 : nsoptions:lcl[0]=0x0, lcl[1]=0x2006, gbl[0]=0x0, gbl[1]=0x0, cha=0x0
2008-08-04 16:19:05.157488 : nsoptions:Vectored IO not supported.
2008-08-04 16:19:05.157518 : nsoptions:lcl[0]=0xf4ffe9ff, lcl[1]=0x6016, gbl[0]=0xe881, gbl[1]=0x0
2008-08-04 16:19:05.157545 : nsoptions:normal exit
2008-08-04 16:19:05.157574 : nsnainit:entry
2008-08-04 16:19:05.157603 : nsnainit:normal exit
2008-08-04 16:19:05.157642 : nsopen:global context check-in (to slot 6) complete
2008-08-04 16:19:05.157675 : nsopen:lcl[0]=0xf4ffe9ff, lcl[1]=0x6016, gbl[0]=0xe881, gbl[1]=0x0, tdu=4096, sdu=8192
2008-08-04 16:19:05.157706 : nsfull_opn:entry
2008-08-04 16:19:05.157735 : nsfull_opn:cid=6, opcode=65, bl=0, what=0, uflgs=0x0, cflgs=0x0
2008-08-04 16:19:05.157761 : nsfull_opn:nsctx: state=7, flg=0x4001, mvd=0
2008-08-04 16:19:05.157790 : nsfull_opn:normal exit
2008-08-04 16:19:05.157816 : nsopen:normal exit
2008-08-04 16:19:05.157854 : nsevreg:entry
2008-08-04 16:19:05.157884 : nsevreg:begin registration process for 6
2008-08-04 16:19:05.157912 : nsevregPrePost:entry
2008-08-04 16:19:05.157940 : nsevregPrePost:normal exit
2008-08-04 16:19:05.157968 : nsevreg:sgt=0, evn=1, evt[2]=0x0
2008-08-04 16:19:05.157996 : nsevreg:begin notification process for 6
2008-08-04 16:19:05.158022 : nsevregAffectNotif:entry
2008-08-04 16:19:05.158050 : nsevregAffectNotif:exit (0)
2008-08-04 16:19:05.158078 : nsevreg:rdm=0, sgt=0, evt[0]=0x800, [1]=0x800, [2]=0x0, nrg=0
2008-08-04 16:19:05.158105 : nsevreg:registering for 0x800
2008-08-04 16:19:05.158135 : ntpctl:entry
2008-08-04 16:19:05.158162 : ntpctl:exit
2008-08-04 16:19:05.158203 : nsevreg:normal exit
2008-08-04 16:19:05.158260 : nsbeqaddr:error exit
2008-08-04 16:19:05.158289 : nsbequeath:error exit
2008-08-04 16:19:05.158342 : nsglhe:exit
Maybe you are looking for
-
PSE 8 upgrade album conversion issue
I upgraded my system to Windows 7 and since I was going to have to reload everything anyway, I upgraded to PSE 8 at the same time. Before the upgrade I saved my catalog files to my external drive and then moved them back to the C:\Program Files\Adobe
-
Dynamic coloring in interactive form
Hi I'm developing a PDF using Interactive form UI element. My requirement is to dynamically change the colour of values (based on the same values) that appear in text input fields as well as of the values that appear in table rows. Is this possible?
-
"Software upgrade" not shown in general settings....trying to upgrade to ios 6.0 or better but can't.
-
G5 Dual 1.8 does not go to sleep after 10.4.3
Hi I need to ask for help with my G5. I have had serious problems with it, where I cannot press certain links online, so I did a new OS and archive install from the 10.4 DVD. Then when I had to update, I updated with the combo, something I don't usua
-
One of mail accounts do not keep my password, what can I do?
I have several mail accounts in my device, iPod 5th gen, but specially one of them dos not keep the password so I have to write over and over every time I review this account. I tried erasing this account and then sign in it again and remains the sam