The screen on my macbook has malfunction. When I change the brightness to zero and return to the first level of brightness it works briefly but then the screen starts to flicker brightness and quickly extinguished.

The screen on my macbook has malfunction. When I change the brightness to zero and return to the first level of brightness it works briefly but then the screen starts to flicker brightness and quickly extinguished. It seems to be a bad contact, it would not be normal for a quality product that should have, he has less than two years of use. Not because of the bad use or crash. Someone with the same problem or can help me? It's really a contact problem? I've done all the procedures recommended by the online support. Thanks.

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP!  Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process.  Since I did that, my MBP boots up just like normal.  No flashing yellow screen anymore!!   
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

Similar Messages

  • I have an iPhone 6.  For the first two weeks my bluetooth worked fine but then started having issues.  Now, although it shows that it is connected to Bluetooth, I can't hear any of the calls.  The radio continues to play.  Please help!

    I have an iPhone 6.  For the first two weeks my bluetooth worked fine but then started having issues.  Now, although it shows that it is connected to Bluetooth, I can't hear any of the calls.  The radio continues to play.  Please help!

    Hello there, Srushevics.
    It sounds like you may be having issues with the connectivity of your iPhone with the Bluetooth in your vehicle. The following Knowledge Base article offers up some great steps for troubleshooting that Bluetooth connectivity with your iOS device:
    If you can’t use a Bluetooth accessory or car kit
    To resolve the issue, you'll need to first sign in to iCloud and review your devices:
    Sign in to iCloud on your iOS devices and Macs with OS X Yosemite (available this fall).
    On one of your devices, tap Settings > Bluetooth and look under My Devices. You'll see all devices that are connected to Bluetooth, but make sure that you see your Apple devices that are signed in to iCloud and are using iOS 8 or OS X Yosemite.
    Sign out of your iCloud account from any devices that you don't want to use. To sign out of iCloud on an iOS device, tap Settings > iCloud > Sign Out.
    Then, remove any inactive devices from iCloud:
    Sign in to iCloud.com.
    Select Find My iPhone.
    Select any devices that aren't active anymore.
    Wait for Find My iPhone to stop trying to find the inactive device.
    You should see the option to remove this device from your account. Select it to remove the device.
    After following the steps above, restart the device with the issue. Then try to use it with your Bluetooth accessory.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Hello my MacBook is crashing when I watch Youtube videos. Safari and Flash Player are updated.

    Hello,
    My MacBook is crashing when I watch Youtube videos. Safari and Flash Player are updated.
    What is the problem?
    It will be necessary to take him on a technical assistance?
    thank you

    Have you tried an alternate browser to see if the same issue happens? Try Firefox or Chrome. Chrome has Flash embedded in it, so if it doesn't work, it's probably not a Flash issue. FIrefox is at http://www.mozilla.org/en-US/firefox/new/ and Chrome is at https://www.google.com/chrome .
    Another thing to try is to sign up for HTML5 video from Youtube. See http://www.youtube.com/html5

  • When I download and install iTunes it looks it does it, but then it never starts, instead gives an error report and says iTunes encountered some problem and has to close

    When I download and install iTunes it looks it does it, but then it never starts, instead gives an error report and says iTunes encountered some problem and has to close

    i don't know how they solved it, i'm having the same problem on Windows XP
    EventType : BEX
    P1 : iTunes.exe
    P2 : 10.7.0.21
    P3 : 504d85d9
    P4 : unknown
    P5 : 0.0.0.0
    P6 : 00000000
    P7 : 08920740
    P8 : c0000005
    P9 : 00000008

  • I have a macbook connected to LED cinema display. The display started to flicker. The display turns black for a second or two. Sometimes I restart macbook and display. Sometimes it helps.

    I have a macbook connected to LED cinema display. The display started to flicker. The display turns black for a second or two. Sometimes I restart macbook and display. Sometimes it helps.

    same issue, either your wiring or display itself is going bad. for me, it was the display but luckily still under warranty

  • So this morning, the sound on my MacBookPro was working perfectly, but then all of the sudden, the sound didn't work. When i turned the volume up, it showed it turning up, but there was no noise. I also tried plugging in my earphones, and it still didn't

    So this morning, the sound on my MacBookPro was working perfectly, but then all of the sudden, the sound didn't work. When i turned the volume up, it showed it turning up, but there was no noise. I also tried plugging in my earphones, and it still didn't work. I don't know what to do!!

    Go step by step and test.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers / Headphones
        Make sure that Mute is not enabled.
    2.Plug in and  remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.

  • We just moved from the United States to Costa Rica.  The first two days my mac worked great.  Then all of a sudden I was trying to use a game application and the screen went black and there is a white cursor which I can move around, but I can't escape it

    We just moved from the United States to Costa Rica.  The first two days my mac worked great.  Then all of a sudden I was trying to use a game application and the screen went black and there is a white cursor which I can move around, but I can't escape it. When I restart it seems okay and I see my main screen, but only for a second and then it goes black again. 
    This computer was brand new in June.  Is it the humidity???   What can I do.  Please help!!!!

    No guarantess but try smc and pram resets,

  • After successful install, all my adobe cc docs, when open, change pointer arrow, i-beam and window to oversize. When doc closes all return to normal size. I'm on a PC. Screen res set to medium 1920x1200. Any ideas how to fix?

    After successful install, all my adobe cc docs, when open, change pointer arrow, i-beam and window elements to oversize. When doc closes all return to normal size. I'm on a PC. Screen res set to medium 1920x1200. Any ideas how to fix?

    Ok thanks Linxup I would recommend posting in the respective forums for each of those software titles as opposed to the Creative Cloud Download & Install forum.  The relevant forums are as follows:
    InDesign - InDesign
    Illustrator - Illustrator

  • HT3275 My Time Capsule keeps saying "backup failed" due to the network password not being correct. I have not changed my password and every day I have to type the same one in and then it works. But then the same thing happens the next day. Can anyone help

    My Time Capsule keeps saying "backup failed" due to the network password not being correct. I have not changed my password and every day I have to type the same one in and then it works. But then the same thing happens the next day. Can anyone help? This only started doing this about 2 weeks ago.

    Hello,
    Mac OS X 10.4 Help, I forgot a password in my Keychain
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1960.html
    Resetting your keychain in Mac OS X...
    If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
    http://support.apple.com/kb/TS1544
    Open Keychain Access in Utilities, use Keychain First Aid under the Menu item, then either check the Password under that item, change it, or delete it and start over.

  • My screen wont turn on, and the screen is black. It was working fine, but then it just turned off. The only way it will work is if I close my laptop, and pinch the two screens together

    My screen wont turn on, and the screen is black. It was working fine, but then it just turned off. The only way it will work is if I close my laptop, and pinch the two screens together

    You have a hardware problem and you should take it into a apple store to be looked at and fixed.

  • TS1559 i have done all of the above wifi worked briefly but is greyed out again what can i do

    i have followed apples instructions to solve the problem the wifi worked briefly but is greyed out again can anybody help have done ios7 update

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I used this iphone wire for a bit, it worked perfectly but then suddenly i couldnt charge my phone and it stopped working completely. ive tried many other wires but they dont seem to work as well. im starting to get really frustrated

    i used this iphone wire for a bit, it worked perfectly but then suddenly i couldnt charge my iphone 5  and it stopped working completely. ive tried many other wires but they dont seem to work as well. im starting to get really frustrated and im really unsure of whats the case. i really really need help with this. please help asap!!

    Presuming you are using a wall charger - it would seem that your battery needs to be looked at in an Apple store

  • Website turns on but then some features start messing up like i cant scroll or the scroll list gets compacted and i cant see what is on the list etc

    I go to this chat site often and with fire fox when i log on to it it works fine for a bit but then the panel on the right that shows what users are logged on etc gets compacted and i can't see who is online etc. Also my firefox turns black after prolonged use or left unattended. If i type something in the search bar my drop down suggestion menu is all black and if i go to a new site its also all black. I have to close firefox and restart. What is going on here?

    Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app.  I am certain other applications also need this information.  Although lengthy, I could not find a more comprehensive place to retrieve this information.  Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • When i try to click on reply to an email,it usually opens another box,it attempts to but then has a red circle with a line through it

    this has also happened when trying to add pictures on sites and it opens another window.It did not used to do this it is a problem i have come across lately and am not sure if it is since i updated firefox.pop up windows are set to allowed.i think it since i updated but could be a coincidence,as i may have updated some of the other spyware,pop up blocker sites,just never had this problem before?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Hi - my mac mini drops the internet after 30 seconds. If i reset in the diagnosics it works again but then drops it just the same. Its connected to my home network. All other apple devices are fine?

    I have a home network which services:
    Apple TV
    Air port express
    Mac book pro
    I phone
    All the above wrok perfectly.
    I have a mac Mini which will join the network and operates fine but keeps dropping the internet after 30 secods of connection?
    If I reset everything in the diagnostics box it will rejoin the network but then drops it again !!!
    any ideas?
    Chris

    Hi Chris, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.5, 10.6, 10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x/10.8.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.

Maybe you are looking for

  • How to create process variant in process chain

    What is a process variant? i try to add Infocube compression to the fi process chain. To accomplish this task, i have to create process variant. please tell me the step by step process how to create process variant and successfully add the compressio

  • Update of Registers based on Material Group

    HI Gurus        There are  Material groups say A,B,C etc. They require A-A1,A2,A3(Subgroups)                    B-B1,B2(Subgroups)                    C-C1,C2(Subgroups) Now Requiremnt is registers should be updated /extracted (J1I5(Update of register

  • Key code     +      Control Key

    Hi friends, Please tell me what is a Key Code in "Payment Methods" and Control Key in "House Banks Set Up Window". Rgrds Jimmy

  • [svn] 3401: don't include frameworks/projects/air/ ApplicationUpdater directory in the package.

    Revision: 3401 Author: [email protected] Date: 2008-09-29 10:54:59 -0700 (Mon, 29 Sep 2008) Log Message: don't include frameworks/projects/air/ApplicationUpdater directory in the package. -trying to reduce bloat the package has incurred Modified Path

  • LabView 2010 Lockup on opening VI

    I am running LabView 2010 SP1 with about 15 X-Controls on the front panel. When I open the main GUI VI, I get about 750 - 800 VI's in during the Loading phase and then the LabView program locks with one of hte processor cores fully consumed. It seems