Which TMG in the farm you are connected to

Hello,
I have website published through MS TMG2010 which is array of 4 servers, sometimes  i face issues with the website and at the end its related to TMG, so i need to know how to configure TMG or IIS to know which TMG server i am connected to.
in IIS you can do this by configure the HTTP response but i dont know how to do so in TMG
any help plz ?

Hi,
Thank you for your post here.
As far as I know, TMG has no option for us to do that. You may capture the packets and distinguish them based on IP.
Best Regards
Quan Gu 

Similar Messages

  • Internet Security Warning - The Server you are connected to is using security certificate that...

    Mail Client on Laptop is Windows Live Mail.  Mail server outgoing.yahoo.verizon.net.  DSL Internet.  Long time Verizon customer.  Client configuration settings correct according to Verizon.  I now get an Interenet Security Warning message whenever I start up the Live Mail Client and send an e-mail.  Only happens on sending e-mails.  The warning message comes back looking for a YES or NO answer.  The message is
    "The server you are connected to is using a security certificate that could not be verified."
    "A certificate chain processed, but terminated in a root certificate which is not trused by the trust provider."
    "Do you want to continue using the server?"      "YES    or   NO"
    I click YES in order to successfully send e-mail messages which I do not like to do.  I only have to press YES on the first e-mail message that I send.  The rest outgoing e-mail work correctly after that first one. 
    What has Verizonn done to cause the problem on my client software?  I have done nothing to change configurations on my Windows 7 and Windos Live Mail laptop.  I have done some research, and verified that my computer time and time zone is correct.  I am looking for an explanation on why this is happening from Verizon. 
    HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    If no one has a better idea you may want to unlink Yahoo from VZ. http://forums.verizon.com/t5/Verizon-net-Email/Unlinking-Verizon-email-from-Yahoo-portal/td-p/413475 It is possible to lose data as pointed out in the linked thread.
    OR Did you get any indication that your mail server settings were going to change at the end of Sept 2013? A mass email went out for "standard" verizon users earlier this year.  I am not sure if this effects Yahoo/VZ settings.
    If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
    http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

  • The server you are connected to is using a security certificate that CAN NOT BE VERIFIED.

    First we have changed nothing, we have not done anything to our Yahoo or Outlook 2003 and suddenly this starts popping up all the time.
    We have Windows 7, Office Pro. 2003 and use Outlook 2003 with Verizon Fios and Yahoo is our email server. This message started popping up yesterday out no where, does anyone have any thoughts about it? I have posted it on the Verizon site, however I have more faith in the help I receive here thank you.
    The server you are connected to is using a security certificate that CAN NOT BE VERIFIED.
    A certificate chain processed but terminated in a root certificate which is not trusted by the trust provider.
    Do you want to continue using this server?
    Solved!
    Go to Solution.

    Did you get any email notification of a change to your email servers? So far I only found these settings from 2010
    Incoming Server: incoming.yahoo.verizon.net
    Server Requires Authentication: Yes
    Username: fakeacct
    Password: fakepassword
    Requires a Secure Connection (SSL): No
    Port: 110
    Outgoing Server: outgoing.yahoo.verizon.net
    Server Requires Authentication: Yes (You can set it to use the same settings as incoming, or manually enter the username and password.)
    Requires a Secure Connection (SSL): No
    Port: 25
    (Big thanks to SomeGirl for this info)
    Are these the settings configured in outlook?  If these are the setting they may need to be updated
    If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
    http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

  • When I go on a song on my music on my iPod touch 4th gen I can no longer get the bar across the top of the screen which allows you to change which part of the song you are up to, how do I get it back?

    when I go on a song on my music on my iPod touch 4th gen I can no longer get the bar across the top of the screen which allows you to change which part of the song you are up to, how do I get it back?

    hello, please install the search reset addon - it will revert the most common customizations those adware programs do in firefox back to the default: https://addons.mozilla.org/firefox/addon/searchreset/

  • I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says -  'the version of the server you are trying to connect to is not supp

    I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says -  'the version of the server you are trying to connect to is not supported. pls contact your system administrator to resolve the problem'. MB-Air uses maverick downloaded yesterday - upgrade from mountain lion. MB uses snow leopard still, as i am quite used to it and am thinking of upgrade if mavericks work fine on air. Also have parallel on snow leopard but it is no longer supported according to mac website - if i upgrade am i going to lose my parallel and will have to buy a new one!!!

    Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
    In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

  • HT201210 I have tried to update to IOS6 and it has prompted me to connect to ITunes but when I do I keep getting the message ' There is no sim card inserted in the Iphone you are trying to activate'.  My phone is now locked on the IOS6 update screen!

    I have been without mu IPhone 4 since yesterday now as I tried to do the IOS6 update and since then it has messed up my phone and I am unable to access any of it's functions as it is locked on the update screen. 
    My phone was bought through Vodfone and have been on their network ever since, never had any problems like this.
    It prompts me to connect to ITunes and when I do it will not go any further as stating 'No sim card is inserted in the IPhone you are trying to activate'.  Well there is a sim in there and I have removed it and reinserted it on many occasions today.  I am also not trying to activate my phone as all I did was try to the update which I was prompted to do in my setting!
    I have seen many people on the net today with the same or similar problems but as yet I am to find a solution!
    Help, please as it is driving me crazy!!!

    Try a Hard Reset.....
    Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds.  Ignore the swipe to turn off message.

  • I have noticed an issue with utilizing the "stream" function on iOS 7. If you choose to just stream the movie by hitting the play button it seems to actually start downloading (which is fine) but if you are say halfway thru the movie and stop you can clea

    I have noticed an issue with utilizing the “stream” function on iOS 7. If you choose to just stream the movie by hitting the play button it seems to actually start downloading (which is fine) but if you are say halfway thru the movie and stop you can clearly see that storage has been reduced under the usage, yet under the “videos” tab it still states “No Data” the only way to delete what you have partially downloaded is to fully download the video, which is fine but there is no way to tell what videos have been partially downloaded (I.e which occurs a lot when your child switches between movies using the so called “stream” function). This becomes troublesome once the capacity of the ipad is almost met and you have no way to delete this data since you may have several videos that have started to be viewed (hence partially downloaded). Apple needs to somehow make it truly streaming or provide an update so the storage can be managed. The only way I have been able to remove partially downloaded videos is by doing a total software restore. (The video data that is in question when connected to my MacBook shows up in iTunes as “other”) if you have any insight into this issue it would be greatly appreciated. Thanks.

    Here are the screenshots for what it's worth.
    Not sure why I can't post them in the original post.<br>
    <sub><b>Mod edit: See [https://bugzilla.mozilla.org/show_bug.cgi?id=718813 bug 718813]</b></sub>
    '''Again, when I set my DNS server to automatically detect the servers both problems disappear and I have no issues at all.'''
    IMO opendns is either doing this on purpose (unlikely) or they're under some sort of attack/being used to attack the specific torrent sites although I'm open to other explanations. I believe using the automatic setting for DNS is using my own ISP's DNS servers (which again, work fine... but still...)
    I'd rather not use Google's public DNS servers as Google is to commercial these days and I think there's potential privacy issues.
    '''Again I have changed the setting for DNS servers back and forth several times to duplicate/verify the issue(s)... and the issues only happen with the opendns servers.'''

  • EFax: "Registration was unsuccessful. Check that you are connected to the Internet, then try again."

    Trying to use eFax, I am required to register first, but when trying to register, I get to a screen that says "Registration was unsuccessful. Check that you are connected to the Internet, then try again."
    The printer is connected to the Internet: it recognizes the Wifi, the Wireless Network Test checks out OK, and all the other functions which require an Internet connection still work.
    So it is only registration for eFax that does not recognize the printer as being connected to Wifi.
    Thank you, anyone who reads this, for your attention to this matter and time.

    Hello brianspears1776,
    I understand that the Photosmart 7510 will not connect to the Internet to setup eFax, and the issue is only present when trying to use eFax. On this Thread: efax for 7510, I have given the link to troubleshooting issues with sending and receiving, worth a look. Also, JDCorral as mentioned a problem with his series of printer and eFax a couple posts down from the troubleshooting.
    More information regarding eFax can be reviewed here: eFax users - please read.
    I know this is not the technical support you had been looking for, but I hope it is still helpful.
    Regards,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • I really need help. I try to contact support to no avail. There simply is no option on the site, You are always referred to a further topic which has notihing to do with my problem. I bougnt a full master pack CS6 which I had installed on a mac for one ye

    I really need help. I try to contact support to no avail. There simply is no option on the site, You are always referred to a further topic which has notihing to do with my problem. I bougnt a full master pack CS6 which I had installed on a mac for one year. Then, I decided to change it to another computer, so I sisintalled it according to instructions. In the meantime I got a free trial of creative cloud on that computer, but I gave up and decided to reinstall my cd-roms. However, everytime I try to use acrobat for instance it says that my trial period ran out! I disinstalled my cloud products, I am using my registered full master series items, they have nothing whatsoever to do with my creative cloud FREE subscription. If I try to cancel my free membership, it is to no avail, there simply is no such possiblity. I want to use the software I paid dearly for, not the cloud items I disinstalled and which do not interest me. How can I contact Adobe to fix it? It was no fault of mine, I did all I was supposed to, disintalling items before installing the right ones, but the system must have some error i am not responsible for.

    open an app and click help>activate.
    if you try to open an app and see a 'your trial has expired" window, click license this software and enter your serial number.
    if you can't do either, run the cleaner and make sure cc is cleaned from your computer, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.

    AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.
    Has anybody come across this error and found a fool-proof solution? I have found some stuff on the web but nothing seems to work. In particular this one on the Apple Help doesn't:
      http://support.apple.com/kb/HT4700
    I have a W2K3  server where the volume is. It's a new Mac with OSX 10.8 and is connecting with AFP (I don’t want to move to SMB yet). There are older Macs with lower OS and all of them work fine. I have checked all the basic stuff and it is set-up correctly (hosts file on Mac, network, etc.).
    Any help greatly appreciated,
    Cheers,
    Ian

    This may work for you:
    http://www.zdnet.com/mavericks-smb2-problem-and-fixes-7000022519/

  • HT1414 I got my iPhone 4 unlocked from AT&T but whenever i try to connect my phone to iTunes for restoring,  iTunes say me "there is no sim card installed in the iphone you are attempting to activate."

    I got my iPhone 4 unlocked from AT&T but whenever i try to connect my phone to iTunes for restoring,  iTunes say me "there is no sim card installed in the iphone you are attempting to activate."

    sorry. you cannot discuss and find solution about the jailbroken phones in this forum.

  • I get the message 'You are not connected to the internet.  Online functionality is not available'  But I am connected to the Internet

    I get the message'You are not connected to the internet.  Online functionality is not available'  I am connected so what can I do?

    Try:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset Network Settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - DId the iPod ever successfully connect to the network?
    - Does the iPod successfully connect to other networks?
    - Do other devices successfully connect with your network?

  • Fix for "The version of the server you are trying to connect to is not supported."

    Like many of you, I experienced the following problem with Lion:
    "The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem."
    I googled and found a workaround for that. It worked for me, maybe worth a try:
    http://www.alexanderwilde.com/2011/04/os-x-lion-connection-error-with-afp-and-wo rkaround/
    Koos

    Same problem here, and the above fixes do not work. I'm running 10.7.5, and the defaults write commands do not appear to work: the plist reverts to its default state after each connection attempt.
    I can confirm that the correct values are entered in the plist immediately after performing the defauts write commands (while logged in as root) described in those links, by opening the plist file in xcode. But regardless of rebooting or not, the file immediately reverts to its default values as soon as an afp connection is made. Extremely frustrating. The "defaults write" simply doesn't stick.
    I desperately need to pull some data off of a Mac IIci that is running Shareway IP under System 7.5.5. This always worked seamlessly in 10.4 though 10.6: I really need a working solution for 10.7. Thanks for any help...

  • Problem "The version of the server you are trying to connect to is not supported."

    Hi,
    I connected a portable hard drive to my Airport Extreme. I can see the hard drive in Airport Utility / Disks but I'm getting an error when I try to connect this disk from Finder / Network / Airport Extreme. I googled and didn't find a solution.
    How can I connect the portable disk from Yosemite?
    There was a problem connecting to the server “Airport Extreme”.
    The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem.

    First image
    Second image

  • "Help" menu always says "The current topic is currently unavailable. Make sure you are connected to the internet. I am connected to the internet.

    "Help" menu always says: "The current topic is currently unavailable." " Make sure you are
    connected to the internet." I am connected to the internet.

    Please restart your machine and try again.
    Thanks

Maybe you are looking for