The sound on my laptop is locked, cant plug in my headphone jack and there is no red light, The laptop is retina display and I am on panic mode?
The sound on my laptop is locked, cant plug in my headphone jack and there is no red light, The laptop is retina display and I am on panic mode.
I have researched the whole subject and the closest thing to my case is one with a red light. I tried the toothpic manoevre suggested by pany with no results. Please help me.
System Preference > Sound > Output > Internal Speakers
Make sure Mute is not enabled.
Reset PRAM. http://support.apple.com/kb/PH4405
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.
Similar Messages
-
I'm on the phone with my Husband and I take the phone from my face and there is this red light. It's creepy, when I put my headphones in it went away.
You might be seeing the proximity sensor. It is how the phone tells when it's near your face and blanks the screen so you don't accidentally touch things with your cheek. It's near the front facing camera.
-
I put my volume on mute a few weeks ago, and I don't know if I have used it again since then or not, but now the volume will not unmute. There is a red light glowing out of the headphone jack. Sound through headphones works. I've tried updating and restarting my computer. Help?
No, not forceful - gentle.
A PRAM-reset might also help:
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
Try this a few times.
Stefan -
Any suggestions of what could be wrong? or how it can be fixed. I have not updated it or anything. this just randomly happened about 2 hours ago. I tried looking for answers but nothing has worked so far.
I tried all of the fixes above and quite a few others like resetting the pram and nvram and what finally worked for me was resetting my sound card from Terminal. Open Terminal and enter the command sudo kill -9 `ps ax|grep 'coreaudio[a-z]' | awk '{print $1}'`. It will ask for your password, enter in your password and press enter. The sound card will be reset and your audio and volume control should be restored..
-
Sound isn't working on my MBP and there is no red light
Ok, so today my sound suddenly stopped working and i have no idea why. I looked for a red light in the headphone hole and i see nothing. I tried turning the sound up (not all the way) and nothing happened. I also tried doing it in settings...nada. When i try changing the sound there is no weird sign on the sceen either. I don't know what to do and i was hoping someone did.
Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
Highlight Internal Speakers.
Make sure that Mute is not enabled.
2. Reset PRAM. http://support.apple.com/kb/PH4405
3. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
4. Applications > Utilities > Audio MIDI Setup
Audio Devices window
Side Bar
Click the Built-in Output.
Under Mute any of the boxes checked? If so, uncheck it. -
Hi, i have an iPad4 and for the last two days it has been stuck with the iCloud Backup pop up. I cant click on OK or turn it off. It has been connected to a wifi network and left locked and plugged in all day. Any one got any ideas please?
Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.
-
I have no sound in my computer, only with headphones, i tried the software update but it still doesn't work, and i have a red light on in my computer. How to resolve that ?
Plug and unlpug the headphone jack with some intention to get the mechanical switch to flip.
You can google for more intrusive methods.
ex. Read through all the many approachs: http://www.ifixit.com/Answers/View/8797/Audio+jack+problem,+no+speaker+sound,+re d+light -
ive got an issue, i cant download anything because it says my disc space is all used.. ive only just bought this macbook.. i go to disc utility and there is macintosh HD at the top, it says i have no spece, there is another available macintosh HD that i can click on and that tell me i have only used 39GB out of the 500. to make this abit more confusing, the one that tells me i have no space says its type says its a logical volume group, the other with space tells me the .
You've encrypted the boot volume with FileVault, so the reading in your first screenshot is normal. The reading in your last screenshot shows that you have plenty of disk space.
A false "disk full" warning can result from moving a Safari download between folder while it's in progress. Is that what you did? -
I cant slide to unlock my ipad, because theres a notification about unable to download application...and the button done and retry will not perform
Try a reset:
Hold the Sleep and Home button down until you see the Apple logo. -
My MacBook Pro 13" (2012) is running Windows 7 on Bootcamp and there is an issue with the headset I'm using. I use a cheap Logitech Stereo Headset H130, but since there is only on audio plugin on the computer, I purchased a 3.5 mm 4-pin smartphone audio adapter thingy. That allowed me to put both my the sound coming to my headset & the microphone on my headset onto one wire. Everything worked wonderfully when running the Mac OS since they probably have support for that kind of stuff. The problem is though that once I try to use the same method in Windows 7, the OS doesn't recognize my headset microphone at all, but, instead when recording my voice decides to use the built-in mac microphone. Using this adapter still allows me to hear from my headset, but not use the microphone and that becomes a problem. It might be so that Windows 7 doesn't have support\drivers for that... How should I continue from here on out? Any advice?
From what I have read from others on here you may be out of luck. You would need the appropriate Windows drivers for the Cirrus chip in the Mac and no one has been able to successfully locate them. Apple wouldn't support this since Windows is an optional install.
Sorry to bring the bad news. -
Where is the hyphen on the apple TV? I am trying to set up my network and there is a hyphen in the password for the network
A few options to try:
They hyphen should be next to the + on the character map.
If you are still having issues, provided your ATV software is up to date, you can now connect an Apple Wireless Keyboard through bluetooth connections.
Change your network password so it does not use a hyphen
Good luck! -
My setup: iMac hardline to Canon i960 printer. Issue: endless printing of the same document. The printer window states that the pinter is in use and there is nothing listed in the Print Queue. How can I stop printing the document?
Soution: Delete the printer and add the same printer back in, therefore creating a new print queue.
-
on my itunes library my albums are all sorted but when i put onto my ipod touch (4th Gen) it seems to duplicate i have checked everything and there are no spaces in the information my question is how do isort it because these things drive me mad i would be most gratefully if you could find a way to help
thatnksNever mind, got it to work. I stumbled around on Google for a while and somehow ended up reading things from the 'jailbroken' community. They had easy instructions to get out of Recovery mode. Thanks anyway though!
P.S. For anyone who experiences this, here is the fix: Hold Power and Home in unison for 6 seconds, then power on as normal. -
As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.
Do you think this product is possible?In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt -
Hello everyone
I've recently messed up my Mac OS X Lion by deleting Aperture, but I need to get my data out of the computer. I've tried to repair it using DU, but it said I needed to backup all my data and reinstall the OS. How do I backup my data to an external drive?
And by the way, I've got an important project in Final Cut Pro X. Is there any way I can back it up (including fxs and positions of the clip) ?
Hope you guys can help me!You need to back up 2 folders, Final Cut Events and Final Cut Projects which by default are located on your Movies Folder. You can always check by clicking on a clip inside Fianl Cut X and selecting Show in Finder in the contextual menu for the selected clip.
Maybe you are looking for
-
My husband and I both have an i phone. When I send him a message it also sends it back to my phone. The same happens when he messages me. His messages are also picked up on my i pad.How can we correct this?
-
IPod Touch is not charging or recognized when plugged in
Hi, Almost a year ago, I bought an iPod Touch 2nd gen 8gig. Everything has been working fine except for in the past month or two. First, the cable that came with my refurbished iPod stopped working; if I positioned my iPod in a very awkward position
-
ICloud problems - multiple apple ids, ids in non-email format , bugs
There is a major bug involving AppleIDs. I searched the web and contacted tech support and gave up after hours on the phone of them trying things that didn't fix the problem. The bug has to do with AppleIDs - I had an appleID, "myname" that I
-
IPad goes straight to app store - help!
iTunes on my iPad goes straight to app store. How can I get my music list to appear? I have already tried resetting and restarting the iPad. I have tried turning off WiFi and then restarting iTunes but it just says I need WiFi for the app store. I ca
-
Hi, Win Serv 2003 PowerCenter 8.6.1 downloaded from edelivery. MS Windows Latin 1 (ANSI), superset of Latin1 Repository Service start sucsesfull. Integrate service with message "The service did not start. Check the log for more information. " the log