The Step Result element in the DITA tasks
While creating a task in DITA, the Steps element contains Step > Step Result element. If I insert the Step Result element, the text "Step Result:" is also displayed in my published output. I would like to use the Step Result tag, but I do not want to see the Step Result text being displayed in my output. I have gone through the style guides, edds, dtds, but don't know where the text is coming from. Please help.
Hi ScottPrentice,
Thanks very much for the response. I followed your instructions, but no luck so far. Here's what I did:
1. Opened my task document > View > Reference pages. I could not locate Step Result referenced frame there.
2. Locate the template for this structured application - The template is Task.template. The template file is blank, so I opened the corresponding edd file: Task.edd
3. The First Format Rules and Text format Rules for the Step Result element are as follows:
First Paragraph Rules:
If Context is Step, use Step.result.begin
else use substep.result.begin
Text Format Rules:
If Context is Step, use paragraph format Step.result.begin
4. The Step.paragraph.begin paragraph style is being used here. You asked me to change the referenced file to none, but I did not find such syntax where I can make it none.
The easiest way to determine the right tag to edit is by checking the paragraph definition in the task topic you're editing.
The paragraph definition is step.result.begin. Could you please help me edit and remove the step result text from it?
Similar Messages
-
How can i write to the Step.Result.ReportText of a Sequence callback?
i need to write to the Step.Result.ReportText and step.Result.Status of a sequence callback using a statement but it jus won't work...how can i do this?....
I am not sure what you are asking but will give it a shot.
Only a step has Step.Result.ReportText and Step.Result.Status properties. Therefore you cannot set these properties for a sequence callback. For certain callbacks that are called by a sequence call step, you can set Step.Result.ReportText and Step.Result.Status of the Sequence Call step that called the callback. To do this you can set Runstate.Caller.Step.Result.ReportText and Runstate.Caller.Step.Result.Status within the callback.
If this does not help you then you must provide information as to which callback you are using and for what step you want to set the Step.Result.ReportText and Step.Result.Status properties -
I have photoshop elements 10 and when I put the 1st disc in it will not load it just launches. I have gone through the step and troubleshooting in the manual but no dices please help.
Hi,
You can download Photoshop Elements 10 from the link below and Install with the serial number,
http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
Thank you -
How to control the location of the SOAP:address element in the WSDL
I have an EJB exposed as webservice in WebLogic 10.3. Further, the EJB has been annotated with the WebService annotation as in:
@WebService(name = "S_CALCULATORname", serviceName = "S_CALCULATORserviceName",
targetNamespace = "http://tempuri.org/SCalculator/")
@Stateless(name = "S_CALCULATOR")
public class S_CALCULATOR_Beanxxxxxx
The location attribute of the SOAP:address element in the WSDL document generated by the Test Client facility is of the form
http://host:port/ejb-java-class-name/service-name-attribute-value as in:
<soap:address location="http://123.4.5.678:1234/S_CALCULATOR_Beanxxxxxx/S_CALCULATORserviceName" />
Is there a way to control the value of the context root portion of the URL, ejb-java-class-name in this case, either using annotations or deployment descriptor files?
thanks in advance for any replies,
octavioHi,
While building the WebService Application you can use the following ANT task...
<target name="build-service4">
<jwsc
srcdir="src"
destdir="output/TestEar">
<jws file="examples/webservices/jwsc/TestServiceImpl.java">
<WLHttpTransport contextPath ="TestContext" serviceUri="TestServiceUri" portName="TestServicePortHTTP"/>
</jws>
</jwsc>
</target>
Or if you are developing JAXRPC EJB based WebService in that case you can even define the Context root using *@weblogic.jws.WLHttpTransport* annotation....
@WLHttpTransport(contextPath="simple", serviceUri="SimpleService", portName="SimpleServicePort")
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com (WebLogic Wonders Are Here)
Edited by: Jay SenSharma on Feb 4, 2010 10:22 PM -
I have tried all the steps as suggested by the community partners i.e. uninstall/reinstall itunes (number of times). If I plug my ipad 2 on my office PC which has itunes, it is recognised immediately. My lap top does not show 'NEW HARDWARE FOUND" as iPad. It just says new hardware found and shows scanner and camera hardware recognised. In my opinion there could be programme file which is having conflict with ipad 2 recognisation. I am surprised to find that APPLE has not yet come out with straightforward steps for stting up procedures to avoid this recognition issue. It is waste of time and causing lot of aggravation among iPad 2 purchasers.
Sounds like it could be your computer and not Apple. Sounds like some registry issues and/or other underlying problems.
What are your computer specs? Year? Manufacturer? RAM? Processor (type & speed, # of cores), OS (32 bit? 64 bit? Professional? Standard?) -
Hello All,
What are the steps needed to make the field in the DFF Additional Information for Agent only take numbers, commas & hyphens?
Navigation
Bob Sales manager<Ebiz form<service request tab<SR type<DFF<additional information for agents <cheque number
The field Cheque number Character allowed (, -) in the DFF Additional Information for Agent should only take numbers
Thanks & Regards
AyeshaThanks Sridar
If we use Number we cannot separate the cheque numbers with , or -
We need to enter numbers along with comma and '_' in cheque number field.
Thanks & Regards
Ayesha -
i am trying to unlock my ipod, i have done all the steps, disconnected and held the home button but it keeps saying try again. how do i get it to unlock
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iPod will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by: -
How to avoid the presence of element in the Destination file if the value is empty
Hi,
I am using a map, in which Source is an XML File, Destination is a FlatFile
For Eg:
Input File
<Name>
FirstName>aaa</FirstName>
<LastName>bbb</LastName>
</Name>
Output File
FirstName LastName
aaa bbb
Destination Schema is also the same, but if the Last name value is empty, the LastName element should not be present in the Destination Flat File.
Eg:
Input File
<Name>
FirstName>aaa</FirstName>
<LastName></LastName>
</Name>
OutputFile should be
FirstName
aaa
Please help in making this requirment....
Regards, Vignesh SSet the “Min Occurs” property of the LastName header element in the flat-file schema to “0” (Zero)
Create a map which maps the Schema for the XML file to the flat-file schema.
In the map, use the Logical Existence and Value mapping as shown in the below image. Here Logical
Existence function is used to check the existence of the field LastName in the input XML. If LastName element exist, then using the Value mapping functiod, map the Contant-LastName (this
would be the header). Below image shall help you with thisexplanation.
As you can see, for the detail record, the value is mapped directly and for the header, as per you requirement a check has been made to for the existence of the LastName
field in the XML to populate the LastName header node. If LastName is empty in the XML, header LastName would not be populated.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful. -
Loading the different result sets in the same sequence for the target table
Dear all,
I have 5 tables say A,B,C,D as my source and i made 3 joins P,Q,R .the result sets of these 3 joins are loading into a target table X but with 3 different targets with same table name.
I created one sequence say Y as my target table has primary key and mapped to three different targets for the same target table which i need to load.
But after deployed and executed successfully ,i am able to load the data from three join result sets with differeent sequence numbers.
I am looking to load data like this.
If First Result set P has 10 Records,SEcond Result Set Q Has 20 and the third result set has 30 records then while loading data into first target it creates the seq for the 10 records from 1..10 and while loading the data for second result set ,it creates the sequence from 11 ...20 and while loading the third target with the third result set it creates the sequence from 21 ----30.
But i am looking to load the three result sets in the sequence 1to 10 but not like creating fresh sequence for each result set.
how can we achieve this in owb?
any solution for this will be appreciated.
thank you
kumarMy design is like following
SRC1
---->Join1--------------------------->Target1( Table X)<-----Seq1
SRC2
SRC3
----> Join2----------->Target2(Table X)<----Seq1
SRC4
-----> Join3 -------> Target3(Table X)<-----Seq1
SRC5
Here the three 3 targets are for the same Table X as well sequence is same i.e seq1
If the First Join has 10 rows ,Seq1 generates sequence in 1 to 10 while loading target1
But while loading second target,Same Seq1 is generating new sequence from 11 but i am looking to load target2 and target 3 starting from sequence 1 but not from 11 or so.
As per your comments :
you want to load 3 sources to one target with same sequence numbers?
yes
Are you doing match from the other two sources on first source by id provided by sequence (since this is the primary key of the table)?
No
can you please tell me how to approach for this?
Thank You
Kumar -
to create apple US account i followed all the steps including none in the payment option. i dont have US address how should i fill the fields.
You need to be in a country to use its store - if you are not in the US with a US billing address then you cannot use the US store.
From the US store's terms of use :
The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance. -
Does an iphone4s become locked to the SIM card that you insert after you follow the steps given to unlock the phone?
I just received the steps by email from meteor and I'm moving to OZ in September. I have the OZ SIM card I intend using over there but I don't want to end up locking the whole phone to the OZ network before I go there.
Any help on this matter would be greatly appreciatedThat only happens when you purchase a supposedly unlocked phone from specific stores that say their unlocked but as soon as you insert a sim card they lock to that carrier... a trick (sort of)... that's something totally different than what you are about to do!
-
I have set up an Apple ID for my child who is under 13. I did not get the steps to set up the password for the ID. How do I do that now. The family sharing has sent an email notification to the email by how do I access it to accept.
Thanks.Hey Lori,
You can set or change the password for an Apple ID by following the steps in this article -
Apple ID: Changing your password - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L -
The ToC node is not getting selected although the help result pane displays the correct help page
I have followed steps given below for a merged project system:-
1. I created 3 projects Module_1 and Module_2.
2. Created the CHM output for the above 2 projects.
3. Created a Main project.
4. Merged the above 2 CHM in the project.
5. Created a new window and added Main.hhc in the TOC option under advance properties.
6. Generated html output for entire project Main.chm.
7. Decompile the ‘Main.chm’ and extracted the ToC file ‘Main.hhc’.
8. For each module project, imported ‘Main.hhc’ as a Baggage File, created window definitions same as Main project and with reference to ‘Main.hhc’.
9. Again generated html output for all the modules and copied both the CHM at the same place.
10. Now regardless of my entry point I am able to see entire ToC.
Issue: When I open Module_1.chm, the chm is displayed as follows, but Main book is highlighted instead of module 2 Book. As I have selected both the options, i.e. Auto-synchronize ToC and Always Show Selection option (when generating chm), Module 1 book should get selected.
Is there a way to control the selection in the LHS pane? I am working on a project which has 15 module chms and the chms are integrated with the application. When I press F1 on a module, the default topic is getting displayed and the respective module is not selected in the LHS pane.
Best regards,
/VikasI have followed steps given below for a merged project system:-
1. I created 3 projects Module_1 and Module_2.
2. Created the CHM output for the above 2 projects.
3. Created a Main project.
4. Merged the above 2 CHM in the project.
5. Created a new window and added Main.hhc in the TOC option under advance properties.
6. Generated html output for entire project Main.chm.
7. Decompile the ‘Main.chm’ and extracted the ToC file ‘Main.hhc’.
8. For each module project, imported ‘Main.hhc’ as a Baggage File, created window definitions same as Main project and with reference to ‘Main.hhc’.
9. Again generated html output for all the modules and copied both the CHM at the same place.
10. Now regardless of my entry point I am able to see entire ToC.
Issue: When I open Module_1.chm, the chm is displayed as follows, but Main book is highlighted instead of module 2 Book. As I have selected both the options, i.e. Auto-synchronize ToC and Always Show Selection option (when generating chm), Module 1 book should get selected.
Is there a way to control the selection in the LHS pane? I am working on a project which has 15 module chms and the chms are integrated with the application. When I press F1 on a module, the default topic is getting displayed and the respective module is not selected in the LHS pane.
Best regards,
/Vikas -
How to display the search result without reloading the whole page
HI,
I have separate fragments for Search Box to enter keyword and Search Result to display the result. Also I have different sections within the page to put these fragments. So how could I display the results without reloading the whole page.
Also if I have next button in my search result area, how could I display the search results in next page without reloading all other sections present in our page. Please let me know if any service or idoc function present such that result could be shown in search result section without reloading whole page.
Please let me know how to restrict page reload for every action within a page.
Thanks,
Ramesh
Edited by: Ramesh_Est on May 27, 2010 3:14 AM
Edited by: Ramesh_Est on May 27, 2010 8:39 PMThis is default behaviour of the template of your space. You can create a new page template and than you can create a region for the search results.
Or you can create a custom taskflow were you use the webcenter taskflows to search for the space.
Take a look at this white paper:
Extending webcenter spaces: http://www.oracle.com/technology/products/webcenter/pdf/owcs_r11_extend_spaces_wp.pdf
and this one:
Customizing site templates: http://www.oracle.com/technology/products/webcenter/pdf/owcs_ps1_site_template_wp.pdf
Edited by: Yannick.O on 13-Apr-2010 02:32 -
How to display the Overall result value at the top of work book
Hi,
How can i display the value of Overall result(Sum of the Total) column at the top of the work book in Text field.
Thanks
SreadharGo to Query Global properties in Query designer and you can find a setting to show result rows on top. This setting will show overall result as first row in the report. But I don't think you can show it in Text field in WB.
Maybe you are looking for
-
Contact Form data to Google Docs/Contacts?
In Adobe Muse CC, I want to create a single-line signup form just like the following I have already created using the form widget: However I would like the results to be sent straight to a spreadsheet in Google Docs, or more preferably straight into
-
I used to be able to open a second tab to get to another web site without closing the first one...now I can see the second tab but when I click on it, nothing happens..
-
Hi, i am counting total number of hours for each order type weekiy. in selection screen if i enter 1 month date range then it should calculate for 4weeks . but my program is counting previous week value while calculating next week value. for 1week
-
Relations with Fund Management and Ledger in General Ledger Accounting
We have already defined Leading Ledger in General Ledger Accounting. After activating the Fund Management, Leading Ledger is not displayed. We can not use FB01, FB03. How can we solve this problem? Wbr.
-
Hi, I am wondering if someone has successfully localized portlet contents in 5.0 using java. I created two properties files MessagesBundle.properties with "greetings = Hello." and MessagesBundle_de_DE.properties with "greetings = Hallo." In my portle