The ToC node is not getting selected although the help result pane displays the correct help page

I have followed steps given below for a merged project system:-
1. I created 3 projects Module_1 and Module_2.
2. Created the CHM output for the above 2 projects.
3. Created a Main project.
4. Merged the above 2 CHM in the project.
5. Created a new window and added Main.hhc in the TOC option under advance properties.
6. Generated html output for entire project Main.chm.
7. Decompile the ‘Main.chm’ and extracted the ToC file ‘Main.hhc’.
8. For each module project, imported ‘Main.hhc’ as a Baggage File, created window definitions same as Main project and with reference to ‘Main.hhc’.
9. Again generated html output for all the modules and copied both the CHM at the same place.
10. Now regardless of my entry point I am able to see entire ToC.
Issue: When I open Module_1.chm, the chm is displayed as follows, but Main book is highlighted instead of module 2 Book. As I have selected both the options, i.e. Auto-synchronize ToC and Always Show Selection option (when generating chm), Module 1 book should get selected.
Is there a way to control the selection in the LHS pane? I am working on a project which has 15 module chms and the chms are integrated with the application. When I press F1 on a module, the default topic is getting displayed and the respective module is not selected in the LHS pane.
Best regards,
/Vikas

Similar Messages

I can no longer get to Facebook Via firefox It comes up loading in the tab but does not get any further one minute it was working the next it was,nt should I try uninstalling firefox then reinstall or does anyone know what could of happened thanks

# Question
I can no longer get to Facebook Via firefox It comes up loading in the tab but does not get any further one minute it was working the next it was,nt should I try uninstalling firefox then reinstall or does anyone know what could of happened thanks

* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Default hierarchy not getting selected in the GOTO report.

Hi friends,
I am facing a weird problem in a jump query(GoTo query). I am giving an input for the main query. The input values are week and Organization(it is a hierarchy). I am executing the report and after that i am going into the jump query through the main query.
In the GoTo Query, when i right click on the Organization -> properties -> Chacteristics -> i could find that the hierarchy is not getting selected by default. I need to go and select from the dropdown manually.
If i execute the same GOTO report directly without going through main query, I am able to see the default hierarchy. I would like to see the same in my first case as well(i.e when i run the query through the Main Query).
Can somebody help me in achieving this.
Thank you
Sunil

@ is a default value as per ALV internal process. This is used in icons .
I think this is causing the confusion.
Check in the fieldcat if there is any adjsutment to be made to handle this.
Br,
Vijay

I keep getting the follow error messages when I try to sign into iTunes store or redeem a song code: We could not complete your iTunes store request. The network connection could not be established. There was an error in the iTunes store, please try again

I keep getting the following error messages on my Mac when I try to redeem a song code: "We could not complete your iTunes store request. The network connection could not be established. There was an error in the iTunes store, please try again later." and then, "We could not complete your iTunes Store request. An unknown error occurred (-50)."

Hello, constance132.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I could recommend when receiving error -50.
"Error -50," "-5000," "8003," "8008," or "-42023"
These alerts occur due to timeouts or conflicts trying to write a file during download.
If you encounter this issue while accessing iTunes Store:
See iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store
If you encounter this issue while while downloading something from the iTunes Store:
Delete your iTunes Downloads folder, located in:
Mac OS X:  ~/Music/iTunes/iTunes Media/Downloads Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
Windows Vista:  \Users\username\Music\iTunes\iTunes Media\Downloads\
Windows 7:  \Users\username\My Music\iTunes\iTunes Media\Downloads\
Windows XP:  \Documents and Settings\username\My Documents\My Music\iTunes\iTunes Media\Downloads\
After locating your iTunes Downloads folder:
Quit iTunes.
Delete the Downloads folder on your computer.
Open iTunes.
Choose Store > Check for Available Downloads.
Enter your account name and password.
If you encounter this issue while while downloading Digital Copies using Windows:
Use MSCONFIG (directions for Windows XP and Windows Vista/Windows 7) to disable conflicting software.
If using MSCONFIG steps resolves the issue, you may want to use the System Configuration Utility to turn on the third-party System Services and Startup Items one at a time (restarting your computer after turning on the item or items) to identify which System Service or Startup Item is causing the conflict.
You can turn all of them back on by selecting the Normal Startup option under the General tab of the System Configuration Utility window, but please note that this may cause the issue to reoccur.
If you are able to isolate the issue to a particular third-party software, you may wish to contact them to let them know of the conflict.
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Cheers,
Jason H.

BDC for MM01 - Views not getting selected

Hi,
I have recorded the MM01 transaction and have developed the BDC code. While recording I selected the following views - Basic Data 1, Basic Data 2, Purchasing, Accounting 1 and Accounting 2.
I run the BDC program by call transaction method. I selected the processing mode as 'A'. Now when I execute the program I get the Select view screen. In that Basic data1, basic data2 and purchasing views are getting selected automatically but Accounting 1 and accounting 2 views are not getting selected. When I click ok, the Plant in organization level is not picked up from excel file.
While selecting views when I scroll the views screen then Accounting 1 and accounting 2 views are getting selected and the plant detail is picked from the excel.
Please help.
Regards,
Sriram

Hi,
Use this BDC okcode to get the Accounting tab selected.
                                                     T     MM01
SAPLMGMM          0060          X
BDC_CURSOR     RMMG1-MTART
                                                            BDC_OKCODE     /00
                                                            RMMG1-MTART     FERT
SAPLMGMM     0070     X
BDC_CURSOR     MSICHTAUSW-DYTXT(02)
                                                            BDC_OKCODE     =P+
                                                            MSICHTAUSW-KZSEL(01)     X
                                                            MSICHTAUSW-KZSEL(02)     X
SAPLMGMM     0070     X
BDC_CURSOR     MSICHTAUSW-DYTXT(08)
                                                            BDC_OKCODE     =ENTR
                                                            MSICHTAUSW-KZSEL(07)     X
                                                            MSICHTAUSW-KZSEL(08)     X
Hope this may be useful
Thanks,
Archana

2 days ago i rented The Avengers, beside it took almost 7h to download, at the end it did not get fully downloaded... 20 last minutes were not there. I know is just 5 dollars, but, how can i make a claim for the amount paid?

2 days ago i rented The Avengers, beside it took almost 7h to download, at the end it did not get fully downloaded... 20 last minutes were not there. I know is just 5 dollars, but, how can i make a claim for the amount paid?, what if I buy a movie later? i will get the same problem!!! still I do not know how the avengers ends!! please do not tell me haha, focus on the problem here!

Welcome to the Apple Community.
Apple's policy on sales of digital content is that all sales are final. If however you wish to appeal to Apple, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.
Currently, if your purchase happens to be your most recent purchase you will not be redirected to the report form, in this case use the report a problem option from the invoice that was emailed to you.
I believe your issues are probably a network issue, which unless you resolve are likely to be repeated again.

Running Time Machine for the first time, how that I make sure that some information I have in the external drive does not get erase in the prosess

Running Time Machine for the first time, how that I make sure that some information I have in the external drive does not get erase in the prosess

1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Note: This is now your Library. It's not a Back Up, and you need another disk for backing up.
Regards
TD

Information in the case folder is not getting updated in Oracle Credit Mgt

Hi,
I have created an SO and an Invoice for this SO for a particular customer. Now, when I create a credit application and a case folder in OCM for this customer, Fields like Receivables Balance, Credit Exposure, Days Sales Outstanding etc. in the case folder are not getting updated. These fields are not getting updated even after refreshing the case folder. It means that the information from the 'Receivables Responsibility is not getting updated in the case folder.
I have already run the 'Initialize credit Summaries' concurrent program after creating the Sales Order and Invoice.
PS: The case folder gets updated only when I set the Profile Option: "AR: Allow summary table refresh" to Yes and then running the "Refresh AR Transactions Summary Tables" concurrent program. But once this program runs the Profile Option again becomes 'No' (Which is a Standard functionality).
So this is a manual way to update the case folder. My requirement is that the case folder should get updated automatically and no manual intervention should be required.

Sumit Malik wrote:
Hi,
I have created an SO and an Invoice for this SO for a particular customer. Now, when I create a credit application and a case folder in OCM for this customer, Fields like Receivables Balance, Credit Exposure, Days Sales Outstanding etc. in the case folder are not getting updated. These fields are not getting updated even after refreshing the case folder. It means that the information from the 'Receivables Responsibility is not getting updated in the case folder.
I have already run the 'Initialize credit Summaries' concurrent program after creating the Sales Order and Invoice.
PS: The case folder gets updated only when I set the Profile Option: "AR: Allow summary table refresh" to Yes and then running the "Refresh AR Transactions Summary Tables" concurrent program. But once this program runs the Profile Option again becomes 'No' (Which is a Standard functionality).
So this is a manual way to update the case folder. My requirement is that the case folder should get updated automatically and no manual intervention should be required.Duplicate post -- Information in the case folder is not getting updated in Oracle Credit Mgt

Billing document cancellation (VF11) the cancelled doc. is not getting automatically cleared against the actual billing doc.

Hi All,
In case of billing document cancellation (VF11) the cancelled doc. is not getting automatically cleared against the actual billing doc. no. Each time user has to clear the doc. manually. We have observed this issue after recent patch updation dated 22nd Feb’2014. Till 21st Feb’2014 the cancelled doc. has been cleared automatically against their respective billing documents.
Please guide.
Thank you.

Hi Gopi,
Please chheck SAP Note No. 1259505. It explains two ways in which SAP releases cancellation documents to FI.
OSS NOte 1259505 lists the possible causes from SD side &
OSS Note 309208 lists the possible causes from FI side.
Regards,
Kavita

Hi! I have to update the iPad, and do not get it!

hi! I want to buy about 20€ in apps (keynote, pages, numbers) but for this, I have to update the iPad, and do not get it! in the service have told me that I have to install the update on the Mac lion! you serious!??

If you have iOS 5 already installed on your iPad then you don't need to update the iPad - if you are on iOS 4 or lower then you will need to update if you want those apps as they now have iOS 5 as a requirement.
If you have a Mac then in order to update to iOS 5 you will need iTunes 10.5+ and Mac OS X10.5.8 or higher. If you have a PC then you will iTunes 10.5+ and Windows 7, Vista or XP Home or Professional with Service Pack 3 or later.

An error occured while creating the new dataset Could not get type informat

Uses: Windows XP Pro SP3+; OracleXE; Oracle 8i Client; ODP.NET; Visual Studio 2005 PRO;
I had OracleXE and was using OracleXE's Oracle.DataAccess Version 10.2.0.100 which was located in C:\oraclexe\app\oracle\product\10.2.0\server\BIN. Then to use Oracle Developer Tools for VS, I installed ODAC where the Oracle.DataAccess's version was 2.111.6.20.
Everything connected via SqlPlus and even was able to Oracle XE Home page and was able to loginto it. Further, was even able to create connection with Oracle Dot Net Provider. The problem was created when I tried to create a datasource from DataSource Menu in VS.2005. It was giving an error saying "An error occured while creating the new dataset Could not get type information for dataset". However I wittnessed that Dataset is been created in Solutions Explorer but not in Data Source Tab. Further researching I was able to create Datasets with Microsofts Oracle Data provider with out any issue.
My Path variable list the following:
C:\app\Administrator\product\11.1.0\client_1;
C:\app\Administrator\product\11.1.0\client_1\bin;
C:\oraclexe\app\oracle\product\10.2.0\server\bin;
C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\;
C:\Program Files\Borland\BDS\4.0\Bin;
C:\PROGRA~1\Borland\Delphi5\Projects\Bpl;
C:\PROGRA~1\Borland\vbroker\jre\Bin;
C:\PROGRA~1\Borland\vbroker\Bin;
C:\PROGRA~1\Borland\Delphi5\Bin;C:\orant\bin;
C:\WINDOWS\system32;C:\WINDOWS;
C:\WINDOWS\System32\Wbem;
c:\Program Files\Microsoft SQL Server\90\Tools\binn\;
C:\Program Files\Microsoft SQL Server\80\Tools\BINN;
C:\Program Files\java\jdk1.6.0_07\bin.
Further I got 2 Oracle Homes one which C:\orant and other is located in C:\app\Administrator\product\11.1.0\client_1.
Also noted that while deploying at client site I started gett'n this error:
"Unable to install or run the application. The application requires that assembly Oracle.DataAcces version be installed in Global Assembly Cache First."
Is it due to change in the production machine? Any help in this regard is greatly appreciated.

Hi Pushpa,
Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
Further,suggest you explore if the below resolutions can be adopted in your case.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
Regards,
Pradeepkumar haragoldavar

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out wh

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out what is going on? We have it set on auto renewal so I know its not that we haven't renewed this subscription, because we pay automatically.

Hi olivias,
It sounds like there may be some confusion on your system about what application should be associated with PDF files. You can reset filename associations by following the steps in these articles (depending on your operating system):
How to change the default application for a file type | Macworld
http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
Please let us know if you have additional questions.
Best,
Sara

Cannot upgrade my ipod touch to iOS5.1 - error:"the network connection could not be established" Although I can access the itunes store.

Cannot upgrade my ipod touch to iOS5.1 - error:"the network connection could not be established" Although I can access the itunes store.
Running Mac OS 10.7.3 using itunes 10.6
unplugged other USB devices, disabled security, restarted computer. Next?

Try changing the DNS as described here:
iOS 5 update issues "Network...: Apple Support Communities

After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.

After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.

The warranty says that Apple may restrict service of an iPhone to the country of sale, and any reliable salesperson will tell you that if you tell them that you plan to use the iPhone in another country. Such service restrictions are common with cellphones and are by no means limited to Apple's phones.
Sorry, but if your iPhone requires service, you will need to send it to someone you know in the US who can get it serviced and then send it back to you.
Regards.

I can not get real audio player to record videos from the internet, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.

I can not get real audio player to record videos from the internet i use firefox as my browser on windows 7, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.

dont know what to do

The ToC node is not getting selected although the help result pane displays the correct help page

Similar Messages

Maybe you are looking for