The style 'borderColor' is only supported by type 'mx.controls.Button' with the theme(s) 'halo'.

Hi All,
  Can anybody please let me know about this error in detail ?
Thanks

Hi,
Please go through the following link. May be the solution mentioned in the blog will resolve your issue.
http://gauravj.com/blog/2009/12/styles-themes-and-the-stricter-compiler/
Thanks and Regards,
Pooja Kuber | [email protected] |http://www.infocepts.com

Similar Messages

  • The style 'dropShadowVisible' is only supported by type 'mx.controls.List' with the themes(s) 'spark

    I'm still plagued by these warnings in my Flex project:-
    The style 'dropShadowVisible' is only supported by type 'mx.controls.List' with the themes(s) 'spark'
    Clicking on the warnings doesn't take me to the code.
    The project started as SDK3.5.  I've made it into an SDK4.0 project.  It uses old Halo components throughout.  I've chosen a Halo theme.
    I can get rid of these warnings if I "Use Flex 3 compatibility mode".  BUT, If I use that mode, I get also Run Time Errors - so I decided against this compatibility, and just edited the styling, deprecated syntax, and a few issues to make the app work.
    I tried the solution someone suggested editing the flex-config.xml file, but it didn't work for me.
    The application begins...
    <mx:Application
    xmlns:fx="http://ns.adobe.com/mxml/2009"
    xmlns:mx="library://ns.adobe.com/flex/mx"
    xmlns:s="library://ns.adobe.com/flex/spark"
    (I've obviously tried clean).

    Yes, very irritating. "Only a warning" isn't the whole story, it's more than just an annoyance, it can potentially make all warnings useless.
    Imagine cases where you have multiple warnings (often FB warnings turn up for EACH component resulting in many repeats, design mode is particularly bad with this).  Having a ton of warnings that "aren't really warnings" obscures REAL warnings that we'd want to do something about (and makes errors harder to notice at first--you're so used to always seeing lines under the problems tab that you don't always notice a new error that just popped up).  In the worst case scenario a valid warning that would have prevented a bug is missed and something goes to QA or production that should have been caught at compile time...
    This wouldn't be nearly as annoying if we had some decent way of filtering these warnings from the problems tab. The current filter isn't good enough and only seems to allow you to filter out one message due to the way it works, but sometimes we see more than one type of "bogus" warning.
    Voted and added to comments.  I wonder if there's a feature request out there to improve warning filter capabilities?  I also wonder why nobody complained about this before, it seems pretty easily visible.  Is it the norm for people to just always ignore warnings?  This isn't a good practice, warnings tend to exist for a reason.
    (Btw, this is part of my reasoning for the claim that Halo seems to have become a "second class citizen" component set - hopefully Adobe can do something about this.)

  • BackgroundColor is only supported by type 'mx.containers.Box' with the theme 'halo, spark'

    Hello:
    I just upgrade from Flash Builder Burrito to 4.5. After importing my Burrito project into 4.5, I got like 30 errors saying the following:
    The style 'backgroundColor' is only supported by type 'mx.containers.Box' with the theme(s) 'halo, spark'.
    I have been using backgroundColor through the project to set colors ... Is there a new property name? Do I have to start using CSS?
    The only option I had for theme was "Mobile Theme".
    I would like to be able to use backgroundColor with out rewritting all that code. Is there a way?
    Thanks
    Paul

    I used to have the prerelease "burrito" which I coded all the background colors using the "backgroundColor" property. I just bought the release version from the store and after I unstalled it I started getting the compiler errors releated to "backgroundColor".
    Where do I locate the "use flex 3 compatability" box?

  • Why did i get a different headphone from the one in the pic? It has no volume control button.

    I am really dissapointed with my order. I bought an apple headphone with remote and mic online, and i received a headphone that doesnt look and function the same as the one advertised. It has no volume control button with the + and - signs. This is the second pairs i bought the headphone and this one definitely looks different from the pairs i had previously. I hope someone can clarify this thing, and it's really troublesome if i wanted to return the headphone.

    Are you sure you ordered the earphones WITH remote and volume control? Look at your bill; does it say something like "with remote and mic"? I think you should contact Apple Store for their assistance. Perhaps they really made a mistake and shipped you some old stock item. I agree, shipping and reshipping takes time and is troublesome. Hope you'll find a solution though. 

  • I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been dama

    I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged.  To create a PDF document, go to the source application then print the document to .pdf"  I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file.  After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared.  How do I resolve this problem?

    I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
    the log says the bellow details...what's the problem and how can i resolve it? thanks.
    %%[ ProductName: Distiller ]%%
    %%[Page: 1]%%
    %%[Page: 2]%%
    Cambria not found, using Courier.
    %%[ Error: invalidfont; OffendingCommand: show ]%%
    Stack:
      %%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

  • How do I view downloaded content when the error message, not a supported file type or because the file has been damaged, shows up?

    I trying to download a book as a pdf to view through my adobe reader. But every time I do I keep getting the same error message saying that the file is not a supported file type or because the file has been damaged it can't be opened or viewed. What do I do and how do I get it to work. Because as of now I only have one option of downloading the book and I've tried to download the app notable pdf to see it that worked but it didn't either. As of right now I'm using google chrome but I also tried using Safari but it's still not working. I have a Mac with a Mac OS X updated system. I need an answer ASAP. Can anyone help me?

    I have the same issue.  Almost none of the PDFs I download from Safari browser can be opened. Same message about the file being damaged or not really a true PDF.  Neither of these are the issue here. Size of file is not an issue. I have Acrobat Reader XI so I believe that's pretty up to date.  If I open with Text Editor the file is blank.  any ideas?

  • Does the final Release 5.1 Support ear type deployment in Weblogic

    I down loaded final Release 5.1 and trying to find deploying different
    modules using using ear (Enterprise Archieve), I can not find
    any documents.
    Does the final Release support ear type deploying or not.
    Regards
    Krishna

    No, it supports war and jar deployments only.
    -- Rob
    Krishna Chaganti wrote:
    I down loaded final Release 5.1 and trying to find deploying different
    modules using using ear (Enterprise Archieve), I can not find
    any documents.
    Does the final Release support ear type deploying or not.
    Regards
    Krishna

  • [svn:fx-trunk] 13366: Ensuring that AFEFontManager, if it is available, overrides the lookup for embedded fonts for all supported font types, including TTF, when embedding legacy DefineFont3 fonts.

    Revision: 13366
    Revision: 13366
    Author:   [email protected]
    Date:     2010-01-07 22:15:50 -0800 (Thu, 07 Jan 2010)
    Log Message:
    Ensuring that AFEFontManager, if it is available, overrides the lookup for embedded fonts for all supported font types, including TTF, when embedding legacy DefineFont3 fonts. BatikFontManager will remain a backup in the event that AFEFontManager is not found though BatikFontManager;s support is limited to TTF for legacy DefineFont3 fonts.
    QE notes: Remember that bitmap comparisons could change slightly
    Doc notes: N/A
    Bugs: N/A
    Reviewer: For Gaurav
    Tests run: checkintests, QE had run local tests
    Is noteworthy for integration: Yes
    Modified Paths:
        flex/sdk/trunk/frameworks/flex-config.xml

    I got again a total system freeze today when I wanted to launch firefox using only the openbox menu, without wbar running.
    So I decided to try now the 'nouveau.noaccel=1' kernel command line parameter, and to use again wbar for my frequently used applis.
    In the Xorg log, the differences are:
    without 'nouveau.noaccel=1'
    [ 30.761] (II) UnloadModule: "nv"
    [ 30.761] (II) Unloading nv
    [ 30.761] (--) Depth 24 pixmap format is 32 bpp
    [ 30.762] (II) NOUVEAU(0): Opened GPU channel 0
    [ 30.765] (II) NOUVEAU(0): [DRI2] Setup complete
    [ 30.765] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
    [ 30.765] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
    [ 30.776] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 30.777] (II) EXA(0): Driver registered support for the following operations:
    [ 30.777] (II) Solid
    [ 30.777] (II) Copy
    [ 30.777] (II) Composite (RENDER acceleration)
    [ 30.777] (II) UploadToScreen
    [ 30.777] (II) DownloadFromScreen
    [ 30.777] (==) NOUVEAU(0): Backing store disabled
    [ 30.777] (==) NOUVEAU(0): Silken mouse enabled
    with 'nouveau.noaccel=1'
    [ 1191.621] (II) UnloadModule: "nv"
    [ 1191.621] (II) Unloading nv
    [ 1191.621] (--) Depth 24 pixmap format is 32 bpp
    [ 1191.621] (EE) NOUVEAU(0): Error creating GPU channel: -19
    [ 1191.621] (EE) NOUVEAU(0): Error initialising acceleration. Falling back to NoAccel
    [ 1191.621] (==) NOUVEAU(0): Backing store disabled
    [ 1191.621] (==) NOUVEAU(0): Silken mouse enabled
    [ 1191.621] (==) NOUVEAU(0): DPMS enabled
    So now 3D acceleration is disabled.
    I will see now if the system is stable enough for my daily usage and gives satisfactory performances.
    I am almost sure that the mesa nouveau dri driver is the cause of the freezes.
    Last edited by berbae (2013-03-27 10:07:42)

  • "the file has an un-supported compression type"  appears today after updating Premiere Pro CC

    Started computer, Opened up TX ATTO project today and portions of an existing project is off line after project opens, and does not ask you to relink as it is opening.
    A segment of a sequence in the timeline is Off Line. Go to Relink, then find clip, select, then “the file has an un-supported compression type” appears as you select the correct clip to “relink”. Will not let you relink. Fun Fun
    I did nothing but edit yesterday and e-mail. Nothing new or opened, except update CC PP. The clips that it need to link with are there.

    MTS files, from a SONY FS100 camera. First time we have seen this occurrence with multiple boxes running PP CC.
    I tried some just basic tests.
    It was only one clip. So I copied it to the desk top, renamed it something different and it relinked that specific clip thru the entire timeline. Weird. Something with the clip name with in the project got corrupt, because even the specific back up  of the RAW media clip on our server said the exact same error.
    Problem solved.
    Thank you for responding!

  • The keyboard on my macbook air has stopped working. It was fine at lunch time now the up and down arrows move the page and the left and right take me into dashboard and out. The keys beep if pressed the only way to type is to use bluetooth keyboard.

    The keyboard on my macbook air has stopped working. It was fine at lunch time now the up and down arrows move the page and the left and right take me into dashboard and out. The keys beep if pressed the only way to type is to use bluetooth keyboard.please help

    "If none of the keys work, your computer may be showing a low battery alert that you can’t see.
    Connect your computer to an electric outlet or an external keyboard to see the alert".
    http://support.apple.com/kb/PH10680
    http://support.apple.com/kb/ts1381
    Reset PRAM.  http://support.apple.com/kb/PH4405
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • Every time I download anything I get an error message stating ...could not open ....dmg because it is either not a supported file type or the file has been damaged." What do I need to do to fix this problem?

    For the last month or so, every time I download anything I get an error message stating "........could not open ...... .dmg because it is either not a supported file type or because the file has been damaged...." I do not know what to do to fix this issue. Any ideas?

    hmmm.... try this
    basic troubleshooting:
    Repair Disk Permissions http://support.apple.com/kb/PH5821
    Repair Disk http://support.apple.com/kb/ht1782
    reset ACLs http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/

  • Mac won't open some files MasterPlan.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

    I had this problem of not being able to open some files a couple of years ago and eventually was able to fix it but i can't remember how. Any help would be grateful.

    The following document should help: Error: Adobe Reader could not open '*.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and was not correctly decoded.)
    Please update this thread if your issue is resolved.
    Thanks,
    Shashi

  • I have a macbook pro with the latest update, and any Pdf file I have opened online or downloaded and I try to print it gives me this message Adobe Reader could not open 'April-15th-2014-Messenger.pdf' because it is either not a supported file type or beca

    Adobe Reader could not open 'April-15th-2014-Messenger.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

    Most likely http://helpx.adobe.com/acrobat/kb/pdf-error-1015-11001-update.html

  • I bought an ebook but when I  try to download it I receive a message stating 'Adobe reader could not open .....acsm because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wa

    Can anyone assist me? I keep receiving this message when I download my ebook ''Adobe reader could not open .....acsm because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't decoded).'
    Much appreciated

    I think you should ask in the Digital Editions forum, Adobe Digital Editions

  • How to make a only one spectified type object running at the same time ?

    I want to run specified function with java program in unix,AIX environment.But i want only one specified type object can run at this time when i make command "java xxx &" several times at this time.I had used thread but it can not work. I think there are two processes for system so it can not work. Which class or way in java can i use for this problem ? or I use thread in the wrong way.
    please help me . thank you everybody !!!
    ps:the command "java xxx &" mentioned above,xxx is name of java program ,
    & means command run in background.

    RMI is a good option you can think of. There is one registry and only one object can be bound to it with a specified name. But if your application is large, RMI calls can really slow down your application.
    Another option is to use Sockets. When you load the application check if you can start a server socket on a particular port. If you can, then start the program. If not, another application is already running. So exit your program. The socket you have created will be used only to bind to a particular port. In any system, there can be only one socket bound to a port and this guarantees the single instance running. When your application closes, close the socket too.

Maybe you are looking for