The top of the browser isn't being colored by windows 7

It is simple. The top of the browser isn't being colored as the rest of the programs (i.e Internet Explorer) by Windows 7 windows coloring option, it remains light blue.
== This happened ==
Every time Firefox opened
== Since I started using the broweser.

Hi Andy,
Thanks for the assistance.  I have opened up a support with NI for this case (request #: 7334780) and Tori W. has asked me to send in a MAX Technical Support file and Device Manager screen cap.  It seems like I am missing something from device manager.  I don't have NI-VISA appearing under device manager and the page you linked to suggests that I should have it.  I did a VISA install yesterday (5.1.1) so I'm not sure why NI-VISA doesn't appear under device manager.  Any suggestions?
I unfortunately do not have another PCI slot to try out but I don't think the slot is the problem.  If I rebooted the computer with the PXI-1042 chassis turned off, then the unknown PCI bridge device does not show up in device manager.
When Window's auto driver installation failed it said something like "Windows could not find driver software for your device"   If the driver for this device is installed with VISA, then is there a driver file for it that I can feed to device manager to use as a driver for the unknown PCI bridge device?
Thanks for your help!
Attachments:
Device Manager.png ‏86 KB

Similar Messages

  • The browser has a green color at the top of the page. This green also appears inside the page with certain sites. I'm unable to change it-it's ugly and annoying since I do not know it happened.

    The browser has a green color at the top of the page. This green also appears inside the page with certain sites. I'm unable to change it-it's ugly and annoying since I do not know it happened.

    Read the article below:
    iPhone: Troubleshooting activation issues

  • Recently, iTunes upgraded.  My 7th generation iPod is now not recognized and I cannot sync.  The troubleshooting talks  about being visible in Windows (iPod is invisible)  No other options and nothing about windows 8

    Recently, iTunes upgraded.  My 7th generation iPod is now not recognized and I cannot sync.  The troubleshooting talks  about being visible in Windows (iPod is invisible)  No other options and nothing about windows 8

    I have had similar issues with mine, happens mainly if I transfer songs and then decide to disconnect my iPod to listen to them with my IEMs (I use Interenet Explorer in my case and it is not neccessarely up when this happens, so I seriously doubt it is an issue conencted to the web browser). I have no patience for this so my trick is I try to eject it from iTunes, if that does not work, then I bring Windows explorer up, right mouse click on the iPod mounted drive and select Eject. It gives me the same warning but there is a third button selection called Continue. When I choose that it just disconnets the drive anyway and the iPod is finally disconnected. It seems to work each and every time I do it so this solution is fine for me. Would be intersting to see what the real root cause of this is because I started getting this problem with the newer iTunes 11.

  • In Firefox, I cannot access web links to PDF files. I'm told the browser isn't compatible. I have recent versions of both Firefox and Acrobat, and the pages open fine in IE.

    Any website that send me to a .pdf file will not open if I'm using firefox. In order to print postage from usps.com, for example, an Acrobat window has to open, and it won't.

    Pat, thanks for your reply. I finally had some time to look further into this problem and still trying to figure out. First to answer your questions:
    what is your operating system & version? Windows 7 Professional
    on what browser(s) does that happen? Google Chrome, Firefox, IE
    does it happen for any PDF link, e.g. this? Yes, any link with a pdf extension
    does it still hapen with the latest Reader version 10.1.4? Yes, just downloaded it last week and still the same.
    Another thing I noticed is afer unsuccessfully trying to access the pdf link, the resulting blank page reads "Could not load Adobe Acrobat" (could not load plug-in).
    I do have Adobe Creative Suite 3 installed, which of course provides for Adobe Acrobat; I'm not sure if there is a conflict there, but I might uninstall everything and then just try with Adobe Reader to see from there.
    I hope some of this helps. I appreciate your efforts in trying to assist.
    Cheers,
    Vinnie.

  • When replying to a message in iMail, the message isn't being marked as "replied"

    I am running OS X Lion 10.7.4 on a new MacBook Pro (mid 2012). I am noticing that when I reply to a message in iMail, often times the message is not marked as being replied to. This stays true if I forward the message also.
    Any thoughts?
    Mike

    There is a way to turn off reply quoting.
    Tools menu > account settings > composition and addressing and turn off "Automatically quote the original message when replying."
    There is no option to just drop components of a message selectively, either you quote it in the reply or you do not.

  • I have three apple is accounts. one i set up for my daughter and I am trying delete it, but we can't because the password isn't being recognized. how do i delete my daughtyersd account with out knowing her password?

    i have three apple aqccounts and want tp delete one. how do i do this w/o knowing the password (my daughters)?

    Hi, Fugalltadowivu.  
    Thank you for visiting Apple Support Communities.
    This sounds like Activation Lock has been enabled on this device.  Here is some helpful information regarding this feature.
    Find My iPhone Activation Lock
    http://support.apple.com/en-us/HT201365
    If you purchased your device from a third party, this device may be locked to their Apple ID.  If this is the case you may want to check out the article below.
    Find My iPhone Activation Lock: Removing a device from a previous owner’s account
    http://support.apple.com/en-us/HT201441
    Cheers,
    Jason H.

  • Running 3.6.23 on Ubuntu 10.10. worked fine on Nationwide's site last week. Now they have a new site and there are many problems. Can I make the browser tell their site its on windows not linux?

    changes since new site running All of which worked fine before:
    clicking back button now asks if I really want to leave the current page and logs me out.
    They report my browser is not supported.
    Times out even though I am actively using the site.
    When I try to send a secure message it wipes out what I am still typing and says it is not the right sort of thing to put in a message.

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • I have a mac computer and since it did the updates, my browser isn't working. How do I fix this?

    My mac computer did an update with the Lion software, since then, the browser isn't working at all. How do I fix this?

    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • Firefox Icon does not appear in the top left corner of the Browser on a Mac Desktop

    I have an Intel iMac with OSX version 10.6.7. I downloaded Firefox 4.0 and do not have the Firefox icon in the upper left hand corner of the browser. It appears on my Windows 7 machine but not my Mac.

    You get the orange Firefox menu button if the menu bar is hidden.
    See:
    *https://support.mozilla.org/kb/how-do-i-get-firefox-button
    *https://support.mozilla.org/kb/Menu+bar+is+missing

  • Extending div's across the width of the browser

    I wan't to extend some div's across the width of the browser, for eg: background colors. My container has a max width, so its not straightforward. If I remove that constraint, I lose the ability to demonstrate the max width behavior, which I don't want either.

    Yeah, the grid in reflow is really just a visual and snap aid, it doesn't have any implications except for the min/max width in relation to the breakpoints. We use a lot of full width background images which don't really snap to the area outside the grid unless they're set to body, but want full page or at least much wider than half a gutter (via show outer gutter) content images and bgs. 
    So it really depends on the min col grid you need and the hard 16 col limit is an issue for a grid that that has a higher common multiple for it's column variations. I.e. a 5 and 3 column design would need 15 for the content and 2 for the outside margin but that's over the limit.
    For simplicity's sake we've moved to mostly 2-4 column designs which we can make work with a max 12+2 cols, but you have to figure out multiples that work out cleanly while maintaining a natural looking relationship of content to margins.
    For that reason, and because of the platform on which we build most projects (NationBuilder) requiring a sidebar,  we've gone heavily to 3,2,1 col layouts which we can break into just six layout cols.
    But another workaround we're using is to flop the grid and gutters so that we have 7 gutters of 12% and 6 cols of 4%. The grid is largely just a visual aid so it doesn't seem to have any implications so far. The issue we were having was that the outside gutters are only half width which doesn't work for our designs which tend to have a lot of common match ups and lineups. In that case you have the larger gutters which have a central snap guide as well which you may be able to repurpose to many more cols if you can come up with a clean grid is a lot of experimentation or a spreadsheet, the only way we were able to calculate all our variables into nice round numbers…
    The simplest fix though is probably a lifting of the arbitrary limit on number of columns. I saw on another thread the devs were willing to consider that, they just needed a solid usecase to do so. A grid that accounts for a design with both 4 and 5 columns in it would require at least 20 cols, and 2 extra on the outside would probably be pretty useful so a 24 col max should allow for almost all contingencies…

  • Finish to Finish isn't Being Enforced - Why?

    Hi All,
    I'm struggling...I have a task that needs to have a Finish to Finish (FF) relationship to a prior task because the task cannot finish before the first one finishes.  It was working fine until Actual Hours were entered. now the FF isn't being enforced
    and I don't understand why.   It is allowing the task to finish months prior to the first task finishing.
    Task Inspector doesn't show anything useful I can find, but if I delete the predecessor and then add it again, I get a warning:
    but I don't think there's any conflict.  The task has no constraints on it, nor does the predesscor task.  Row 41 is the one I am speaking of specifically, it should have a FF with task 35, but you can see it's not enforced like the other tasks
    that also have a FF with 35.  The difference are the Actual Hours on 41, which I understand will effect the Start, but shouldn't effect Finish.
    What am I missing?
    Thanks!

    RichPM,
    Yes, that's correct, once a task has started, the predecessor link still exists but it is as I said, null-and-void. Keep in mind that task dependencies define the dynamics of a schedule - how things will play out according to the original plan. The plan
    remains dynamic until actual data drives a stake in the ground. Network logic continues to drive the schedule for any tasks that have not actually started.
    I was going to use your tasks as an example but you apparently have some custom calendars that make it difficult to replicate your dates so I'll use a simple example. Let's say we have two tasks A and B that are set up with a finish-to-finish dependency.
    Task A has a start date of 8/18/14 with a duration of 10 days and task B has a start date of 8/25/14 with a duration of 5 days. The start date of task B is driven by the finish-to-finish predecessor with task A so both tasks have a planned finish date of 8/29/14.
    Task A starts on plan (i.e. 8/18/14). The resources were available to go ahead and start task B so an actual start of 8/20/14 is entered for task B. Since there is nothing that changed the duration of task B, it remains at 5 days, and that then pulls the finish
    date back to  8/26/14, three days earlier than the finish date of Task A (8/29/14). Oops.
    If both tasks must finish together, how do we fix this? There are a few ways, but trying to set up a finish-no-earlier-than constraint isn't one of them. We could simply extend the duration to 8 days but that will increase the work content. If the work content
    must remain unchanged, we can edit the work or resource assignment level such that the desired finish date of 8/29/14 is maintained.
    Note that if task A has a delayed start date, and task B has not been started, then the schedule dynamics will still be in effect and task B will slide out such that it still shows a finish date the same as task A.
    Hope this helps.
    John

  • 360 wireless received not being detected by Windows 7 64bit

    Greetings, I bought this controller a couple of years ago and it's worked fine with Win7 until now. Now the receiver isn't being detected by 2 different computers. This makes it sound like the receiver has failed, but because it's not really and active
    device how often do they really fail? There doesn't appear to be anyway to force Windows to detect something, the "find new device" wizard never finds it's and never even returns from looking. Any advice is appreciated.

    Windows 7 is an Operating System.  It is not a diagnostic tool and it has no capability to compensate for defective hardware!
    You need to contact your service provider or the manufacturer for diagnostic assistance with your defective hardware.  All hardware fails at some point.  Some may be fully functional for years while others will fail within a very short period time. 
    The is now way to forecast when a piece of hardware will fail.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • Excel Output is being displayed as HTML in the browser

    Hi All,
    I am using PeopleSoft XML Publisher 5.6.2 to generate an Excel report using RTF template. The report runs successfully.
    However, when I click the Output file link in the View Log page of process scheduler, the file is being displayed as a HTML page, though the extension of the file is .xls.
    Also when I try to save the file by using 'Save Taget as' option, the browser prompts me to save the file as 'mhtm' file and not 'xls' file.
    The following is an extract from the output file.
    <html>
    <!-- Generated by Oracle XML Publisher 5.6.2 -->
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8"/>
    <title>IM Top 10 Surplus &amp; Deficit Locations</title>
    After doing some research on Internet, I found the following blog post(dated back in 2008) to describe my situation and a workaround to the problem.
    http://peoplesofttipster.com/2008/04/16/xls-xmlp-output-opening-in-browser-not-excel/
    http://peoplesofttipster.com/2008/04/18/xls-xmlp-output-opens-in-browser-workaround/
    Workaround described in the above blog post is to update the charset to us-ascii replacing UTF-8. This seems to work. But with limited file processing capabilities of peoplecode, this workaround is not a simple solution.
    I also verified the mime-type mapping in the web.xml file in the webserver. Please find below the .xls mime-type mapping in the web.xml file.
    <mime-mapping> <extension> xls </extension> <mime-type> application/vnd.ms-excel</mime-type></mime-mapping>
    Question:
    1.How do I force the browser to open the excel output file using either Excel plugin or Excel Application instead of displaying it as HTML page?
    2.If not the above, how can I force the system to promt the user to save the file as Excel file instead of mhtml?
    Additional details :
    work enivronment
    PeopleSoft FSCM 8.9
    PeopleTools 8.48.17
    Oracle 10g
    Windows NT
    Any help would be greatly appreciated.
    Thanks & Regards,
    Vamsi Krishna

    Please try this by Open windows explorer, Click Tools -> Folder Options ->,Click on File Types and Select XLS from the list, Click Advanced, select "Open" and Make sure the “Browse in same window” is not selected.
    Hope this helps,
    Ramesh

  • How to create an MenuBar that stays at the top of the browser windows?

    We are trying to develop a screen in WDA. It has a menu (UI element MenuBar) at the top. Based on the menu selection it calls a WDA to display below the menu. The requirement is to have the menu bar be stationary. The bottom container (TransparentContainer) with the WDA object is allowed to scroll, but the menu on top should not move. The scrolling should be dynamic based on the browser window. The bottom WDA can have more data then can fit on the screen.
    How can we make the menu stationary and the called WDA scrollable? The scroll bars should automatically update due to different browser window sizes.

    Hi,
    Thanks for your response. Our system is functioning on SAP Ver. 7.00, Service Pack 16. I do not know when or if we will be getting the upgrade to 7.01 or 7.02.
    As far as separating the menu and the actual view, each menu selection leads to the loading of a different WDA view inside the TransparentContainer by dynamically linking the ViewContainerUIElement to different WDA views. The trouble here is that when the View becomes too large, we will have to scroll off to the right or down to see additional content. This results in the menu not being accessible unless we scroll back. The requirement is to have the menu stay at the top of the page no matter how the user scrolls through the secondary view container below the MenuBar element.
    So far our best solution was to place an arbitrary pixel size to the TransparentContainer of the view, generating in-window scroll bars for the menu-controlled view. The MenuBar always stays visible because it is on top of the scrollable container. However, with varying screen sizes, set-pixel-size is not an ideal solution. I am hoping that there is a more elegant solution than set pixel size since % does not work with height size setting.
    Are there any ways to achieve this via 7.00 layout settings? Or perhaps a method to detect browser window size? Any ideas are greatly appreciated.

  • I upgraded to 4.0, but I don't have a Firefox button at the top of my browser, I have the standard links (File, Edit, etc.)

    After I upgraded to 4.0, I expected to see the new Firefox button on top of the browser; it simply isn't there and I can't figure out why.

    To get new UI you need to hide the menu bar. To do that in the View menu select Toolbars, then click on the "Menu Bar" entry.
    If you need access to the menus you can press either Alt or F10 to temporarily display them.

Maybe you are looking for