Themes Applied via GPO Not Working in Build 9926?

I've built 2 machines side by side, one using build 9879 and the other using 9926.  They were both built using the exact same process.  They are both in the same OU and have the exact same GPOs applied.
The custom theme that I apply using Group Policy works correctly on the 9879 machine, but I've got nothing on the 9926 machine.  Just a black screen.
Build 9879:
Build 9926:

For what it's worth, after multiple reboots (3x) the custom theme and wallpaper were correctly applied.
Still, the GPO settings were applied correctly and immediately on build 9879 but it took 3 reboots for it to apply on build 9926.

Similar Messages

  • Installing Flash Player 11.8.800.94 via GPO not working properly

    Hello,
    i've installed Flash Player 11.8.800.94 via GPO.
    Installation works fine, but there is no flash player available in Firefox or Internet Explorer.
    Deployed both Flash Players.
    Tried to reinstall Flash Player 11.8.800.94 for Firefox, but it's still not active.
    Windows 7, 64bit
    Greetings,
    Michael

    Hello Comvel.
    RE:
    Hello,
    i haven't fixed it yet.
    I've deployed the last few version of flash player without any problems.
    I haven't found any new things in the admin guide.
    The plugins don't show up in both browsers. I can't enable them.
    On the most importent clients, i've installed flash player manually.
    I know it has been a few months since your post but, I was wonderingif you were able to find a solution for this that didn't involve manual installations. I've recently deployed 11.8.800.175 and am running into the same problems. Some work stations are just fine. But others, (both windows 7 and xp, all IE8) are not working. When navigating to a site like youtube, theres a banner that says update is needed. When you go to manage add-ons there is no shock object/add on.

  • Setting NTFS Folder ACLs via GPO not working on 2012 R2

    I have configured some NTFS folder persmissions using a GPO in
    Computer configuration/Windows Settings/Security Settings/File System/
    Configure this file or folder then: Propagate inheritable permissions to all subfolders and files
    This works great on all my Server 2008R2 boxes. But it has no effect on my 2012R2 boxes! 
    gpresult /z indicates that the policy is read and applied.   
    Why doesn't this work for 2012 R2 servers? 
    Many thanks.

    > This works great on all my Server 2008R2 boxes. But it has no effect on
    > my 2012R2 boxes!
    check %windir%\security\logs\winlogon.log - that's where file system
    permissions are logged.
    In addition, it might be that SYSTEM hasn't full access to the folder
    you want to modify?
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • HT201272 To whom it may concern, This morning I purchased an album, on listening to it three of the tracks are not playing correctly. I read on an apple discussion board that I should delete them and re-download them. This did not work as I was asked to p

    To whom it may concern, This morning I purchased an album, on listening to it three of the tracks are not playing correctly. I read on an apple discussion board that I should delete them and re-download them. This did not work as I was asked to pay for them, and one of the tracks was an album only track.

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • MetaTrader 4 does not install on Build 9926

    Hello,
    MetaTrader 4 does not install on Build 9926 how can I fix it?
    Best,
    Max

    Contact the author of the software and ask them if they have an update forthcoming for installation on Windows 10.
    Carey Frisch

  • Flash Player deploy by GPO - not working

    I've been attempting to get Flash Player 10 (distributable verision, install_flash_player_10_active_x.msi) to deploy accross our network - three sites, around 100 computers total.
    I've assigned it to Group Policy, the client machines pull it down and install successfully (it even shows up in Add/Remove programmes).
    However it doesn't work. Whenever any user goes to a flash-based website they get a message telling them to download and install flash.
    Has anyone else experienced this?
    All our clients are running Win XP and IE8

    In case this might help someone else - I've now given up with installing flash via GPO, and decided to try
    to install via a vbscript computer start up script that I knocked together this morning. In case it might help someone else, copy is included below:
    Basically - put msizap.exe from windows installer sdk + the adodb flash uninstaller/msi file in the directory (strNetworkPath)
    Script then does the following:
    1) Calls adobe's uninstaller exe in silent mode to clean up what adobe can - then what it leaves behind we do ourselves:
    2) removes c:\windows\temp\installax.exe if it exists
    3) searches for and deletes from registry any Managed applications references containing (Adobe Flash Player 10 ActiveX) - in our case, i've already told GPO's to remove flash player - so it's erroring on uninstall at the moment)
    4) Search for any installed msi applications  called 'adobe flash player 10 activex' and runs MSIZAP on them ( seems adobe uninstaller doesn't completely remove the local msi references ;/)
    5) copies MSI down frmo network to windows temp
    6) msiexec /qb msi
    7) delete the msi file
    Sub InstallFlashPlayer()
        ' Network Path to:
        ' msizap.exe
        ' flash installer
        ' flash uninstaller
        strNetworkPath = "\\path\to\flash"
        strFlashVersion = "flash10k.ocx"
        strTempFolder = "C:\WINDOWS\temp"
        strFlashMSI = "install_flash_player_10_1_85_3_active_x.msi"
        On Error Resume Next
        Set WshShell = WScript.CreateObject("WScript.Shell")
        Set fso = WScript.CreateObject("Scripting.FileSystemObject")
        file1 = fso.FileExists ("C:\WINDOWS\system32\Macromed\Flash\" & strFlashVersion)
        if file1 = true then exit sub
        WshShell.Run strNetworkPath & "\uninstall_flash_player.exe -uninstall",7, true
        file1 = fso.FileExists (strTempFolder & "\installax.exe")
        if file1 = true then fso.DeleteFile strTempFolder & "\installax.exe"
        Const HKEY_LOCAL_MACHINE = &H80000002
        strComputer = "."
        Set oReg=GetObject("winmgmts:{impersonationLevel=impersonate}!\\" & _
            strComputer & "\root\default:StdRegProv")
        strKeyPath = "SOFTWARE\Microsoft\Windows\CurrentVersion\Group Policy\AppMgmt"
        oReg.EnumKey HKEY_LOCAL_MACHINE, strKeyPath, arrSubKeys
        For Each subkey In arrSubKeys
    strName = WshShell.RegRead("HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Group Policy\AppMgmt\" & subkey & "\Deployment Name")
            Select Case Err
                Case 0:
                    ' Key successfully read
                    If strname = "Adobe Flash Player 10 ActiveX" Then
                        strProduct = WshShell.RegRead("HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Group Policy\AppMgmt\" & subkey & "\Product ID")
                        'Error Handling if any? - resume next
          WshShell.RegDelete "HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Group Policy\AppMgmt\" & subkey & "\"
          WshShell.RegDelete "HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Group Policy\AppMgmt\" & strProduct
                    End If
               Case Else:
                   ' Some error - skip
                   Err.clear
            End Select
        Next
      Dim installer : Set installer = Nothing
      Set installer = Wscript.CreateObject("WindowsInstaller.Installer") : CheckError    
      Dim product, products, info, productList, version
    On Error Resume Next
    Set products = installer.Products : CheckError
    For Each product In products
      guid  = product
                    name = installer.ProductInfo(product, "ProductName")  : CheckError
      if name = "Adobe Flash Player 10 ActiveX" Then
                        WshShell.Run strNetworkPath & "\MsiZap.Exe TWA! " & guid, 7, true
                        WshShell.Run strNetworkPath & "\MsiZap.Exe TW! " & guid, 7, true
                    end if
    Next
    Set products = Nothing
        fso.CopyFile strNetworkPath & "\" & strFlashMSI, strTempFolder & "\" & strFlashMSI, true
        WshShell.Run "C:\WINDOWS\system32\msiexec.exe /I """ &  strTempFolder & "\" &strFlashMSI & """ /qb-!", 7, true
        fso.DeleteFile strTempFolder & "\" & strFlashMSI
        On Error Goto 0 
    End Sub
    Sub CheckError
    Dim message, errRec
    If Err = 0 Then Exit Sub
    message = Err.Source & " " & Hex(Err) & ": " & Err.Description
    If Not installer Is Nothing Then
      Set errRec = installer.LastErrorRecord
      If Not errRec Is Nothing Then message = message & vbNewLine & errRec.FormatText
    End If
    Wscript.Echo message
    Wscript.Quit 2
    End Sub
    InstallFlashPlayer

  • Custom lock screen GPO not working for domain users

    I have a WS2012 standard server with W8 Pro clients. I'm trying to force the lock screen to a .jpg however it's not working, it leaves the users with just a standard blueish screen.
    I have the "force a specific default lock screen image" enabled with the path \\MRS-DC\WP\mrc_lock_screen.jpg
    The GPO is being applied according to the results wizard, however no image. What gives?

    Hi,
    Please refer to the below articles:
    Win8: How to Manage the Lock Screen Image on Windows 8 and Windows Server 2012
    http://support.microsoft.com/kb/2787100
    Here is a similar thread:
    Change default logon/startup/lock screen in windows 8 pro
    http://social.technet.microsoft.com/Forums/windows/en-US/2590f111-7709-40b9-acee-c2aeaa9a48f8/change-default-logonstartuplock-screen-in-windows-8-pro
    In addition, please check your below policy:
    Prevent changing lock screen image under Computer Configuration\Administrative Templates\Control Panel\Personalization
    Disable it and check the result also.
    Regards,
    Yan Li
    Cataleya Li
    TechNet Community Support

  • Outlook Safe Senders List GPO not working

    Hi
    I followed These instruction
    https://social.technet.microsoft.com/Forums/office/en-US/c0714d7d-2a42-4b0f-9f1d-63234c7278a0/appending-outlook-safe-senders-list-via-gpo
    but my Safe Senders List still not applied
    Any ideas?
    My Environment Office 2010,Exchange 2010, Windows 7x64

    Hi Ben,
    Please close Outlook and only use OWA (Outlook Web Access) to receive the messages from
    [email protected] and check whether the messages are going to Junk E-mail folder or not. If it is listed in junk e-mail folder in OWA, it indicates the message is marked as Spam by Exchange server
    instead of Outlook side.
    If it is marked as Spam by Exchange server, please add this email address to the server safe sender list.
    Create a domain or user-based safe sender or blocked sender list using transport rules
    http://technet.microsoft.com/en-us/library/dn198251(v=exchg.150).aspx
    Safe sender and blocked sender lists FAQ
    http://technet.microsoft.com/en-us/library/dn133608(v=exchg.150).aspx
    Regards,
    Winnie Liang
    TechNet Community Support

  • Javascript calls via getURL not working anymore

    After upgrading to flash player 9,0,115,0 a simple call like
    getURL("javascript(alert'message')); doesn't work anymore on
    Internet Explorer (it fails without any error in policyfiles.txt,
    but it still work on Firefox). My IE version is 7.
    I can't use ExternalInterface 'cause i need to publish as
    Flash Player 7 AS2.0.
    Any comment or suggestion?

    I have a similar problem. When running a local HTML file,
    using IE7 and FP 9,0,115,0, all the getURL function calls cease to
    work.
    If I downgrade to FP8, still using IE7, everything works.
    If I downgrade to IE6, still using FP9.0.115.0, everything
    works.
    If I load the HTML via HTTP (instead of local), using IE7 and
    FP9.0.115.0, everything works.
    If I use Firefox, with FP9.0.115.0, everything works.
    So, the function calls fail only when the swf is contained on
    a
    local HTML file, using
    IE7, and
    FP9.0.115.0. The problem is, most of our customers have that
    software profile, and all of them need to load the content locally
    (its very heavy for network transmission).
    All the getURLs are like this:
    getURL("javascript:someFunction()");
    We're setting the 'allowScriptAccess' to 'always'.
    Also, if we put the OBJECT tag inside the HTML (instead on an
    external JS file), the function calls still do not work.

  • Screensaver GPO not working

    Hi all,
    I did not found answer for my problem in the topics discussed for ScreenSaver GPO for Windows 7.
    I have to create e GPO for Windows 7 SP1 machines which enables screen saver after certain amount of inactivity. Domain controllers are Windows 2008R2. So I go to
    User\Administrative Templates\Control Panel\Personalization and I set the following things here:
    Enabled ScreenSaver
    Password Protect the ScreenSaver
    ScreenSaver time out
    Force specific screen saver - I put Ribon.scr
    The GPO is applied correctly. I check it via GPresult and rsop.msc. I see that there is a configured screensaver which I cannot change because of the policy but after the configured time out of inactivity the screen saver does not start!!!
    If I set the screensaver localy it starts after the time out.
    What could be the reason the screensaver not to start when it applied via a GPO!? Any help would greatly appreciated!

    > Force specific screen saver - I put Ribon.scr
    There is no Screen Saver called "Ribon.scr"...
    20.11.2010  22:29           878.592 Bubbles.scr
    20.11.2010  22:29           221.184 Mystify.scr
    20.11.2010  22:29           413.696 PhotoScreensaver.scr
    20.11.2010  22:29           220.672 Ribbons.scr
    14.07.2009  02:14            10.240 scrnsave.scr
    20.11.2010  22:29           293.888 ssText3d.scr
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • GPO not working for new Users (Background)

    Terminal Server 2012 in a hosted environment
    I've set the below policy to set a default background wich can be changed by the users after this.
    The target is an networkdrive. (The Reason behind this is that we have multiple resellers that all have the same networkdrive but pointing to a different store) Lets just say for this example that is P:/Background/ResellerBackground.jpg
    The policy is Linked to the Resellers OU.
    This works perfectly for all the existing users.
    For new users this is not working at all. It does run the policy but it create the profile after running the policies.
    So the above setting gets overruled by the default windows server 2012 background. The RunOnce atribute is set now, so it will not load it again.
    I have read a lot of different sollutions so far, but none are working in this environment. (From changing the default Hive to changing the default picture etc)
    One sollution came close, but not working perfectly either, this is removing the RunOnce atribute from the register, and letting the new users log in again. You do not wanna let new users login twice.
    Before Windows 7/8/2012, in XP it just copied the default user and then the policies ran. So here the problem does not exist. Now it makes the profile after running the policies.
    Anyone having an idea to resolve this issue? 

    Hi,
    Before going further, what’s the value in the wallpaper registry entry
    value data for new users?
    >>One sollution came close, but not working perfectly either, this is removing the RunOnce atribute from the register, and letting the new users log in again. You
    do not wanna let new users login twice.
    If we choose this solution, we can try running cmd command
    gpupdate/force to see whether it can work.
    Another workaround is we can do it from scratch. We can create a new GPO to deploy wallpaper for these new users. The steps are the same as previous ones, just using
    Security Filtering to apply this new GPO to new users, and unlinking and deleting the GPO after the policy getting updated.
    Best regards,
    Frank Shen

  • Connection to server via smb not working

    hi,
    i have an old G4 iBook 10.3.9 that i'm using for school. to connect to our school server for course material, we were given smb log-in instructions from our it dept. when i put in the ip address, i get a prompt for the id and password, but i cannot get access. we tried logging on with my professor's macbook pro (10.5) and it worked flawlessly.
    i've done all software updates and rechecked the procedure dozens of times, but i can't figure out why it's not working. if anyone has an idea, i'm all ears.
    thanks,

    created in my UTF-8 Mysql DB your table and inserted a record; the select shows:
    SQL> select * from "movieclass"@mysql;
    idClass
    ClassName
    123
    H e l l o
    As you can see the content is there, the "space" between the letters is related to unicode. Each character is interpreted by 2 bytes and SQL*Plus wrongly displays both. Using iSQLPLus or SQLDeveloper does not show the "space" between the letters.
    Here the data type mapping:
    SQL> desc "movieclass"@mysql;
    Name Null? Type
    idClass NUMBER(3)
    ClassName NOT NULL NVARCHAR2(50)
    What's the exact version of DG4ODBC you're using? 11.1.0.7?
    According to the listener file you're using DG4ODBC on Windows. There was a high/low byte issue in DG4ODBC for Windows. This issue is fixed in 11.1.0.7 and a certain patch. So I recommend you to get first the 11.1.0.7 patchset (if you don't already have it installed):
    6890831 Oracle Database Family: Patchset
    11.1.0.7.0 PATCH SET FOR ORACLE DATABASE SERVER 11.1.0.7.0
    and then please apply also the latest patch:
    8689191 Oracle Database Family: Patch
    ORACLE 11G 11.1.0.7 PATCH 16 BUG FOR WINDOWS 32 BIT 11.1.0.7.0
    There was a high/low byte issue
    Edited by: kgronau on Aug 11, 2009 10:28 AM

  • Program does not work after build

    Hi,
    I have built a program today that builds fine (no errors or warnings) but it fails when running the exe.  I am using drivers for a spectrum analyzer (Rohde & Schwarz FSG) and when one of these drivers is called, it returns an error.  Other drivers are run before this particular vi.  Anyone have any idea how to troubleshoot this?  I'm going to try and build the vi on its own and see if it works.  In the mean time, if anyone has any suggestions, please let me know.
    UPDATE: I built the file on its own and it still does not work.  Again, when I run it in developer mode, it works fine.
    VISA Write in rsspecan_core_write.vi->rsspecan_core_attribute_wr​ite_int.vi:3->subrsspecan_core_attribute_express.v​i:2->rsspecan Configure Averaging Type.vi:Instance:Instance           1 41Saved   rsspecan Configure Averaging Type .vi:1->rsspecan Configure Averaging Type.vi
    Thanks.

    I've decided to post the vi since it is free to download.  If anyone has an FSG and wants to build this file and see if they can run it, please do so.
    Attachments:
    rsspecan Configure Averaging Type.vi ‏31 KB

  • MS office report function does not work after building the appication

    I use the MS office report function  with a custom excel template my application.
    It works properly in de developstate, but after building the application it does not work .
    I use office 2000  and Windows XP

    jmq wrote:
    I use the MS office report function  with a custom excel template my application.
    It works properly in de developstate, but after building the application it does not work .
    What error message if any did you get? It could be a couple things:
    1. Did you include the Report Toolkit's dynamic vis in the app's build process?
    Ref: Error 7 when Running an .EXE Using VIs from Report Generation Toolkit for MS Office
    2. How are you giving the path to you custom template, as a relative or an absolute path? The path will be different for the .exe. You have to strip twice.
    Ref: Why Can't My Executable Load My Included File When I Use Relative Path Encoding?
    =====================================================
    Fading out. " ... J. Arthur Rank on gong."

  • Video is not working with build in camera - HP 856...

    Hello,
    the video is not working since Skype 6.3
    I have HP 8560p with Windows 7 32bit
    Also Skype 6.6 is not able to see build in camera.
    All the drivers are updated.
    Do you have any solution for that?
    J.

    Please, run the DirectX diagnostics tool.
    Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Info on all installed devices should be available in this file.
    Be aware that you will have to zip this file before attaching it here.

Maybe you are looking for

  • Help !!! freeze and stuck on grey screen, difficult to reboot, here is my EtreCheck report

    Help !!! I experienced more and more issues since I upgraded to mavericks and i brought my MBP 15" (from 2011, out of warranty) to the Apple genius bar a couple of days after my computer started to freeze and crash on a grey screen with less and less

  • Need help about PDF conversion

    I have red words in a text box using publisher. How come the text show up as black after PDF conversion in Adobe?

  • JSP Servlet and convert the result set of an SQL Query To XML file

    Hi all I have a problem to export my SQL query is resulty into an XML file I had fixed my servlet and JSP so that i can display all the records into my database and that the goal .Now I want to get the result set into JSP so that i can create an XML

  • Opening an .xlsx file

    Newer Microsoft Office files are sent to me from my PC friends and arrive as a .xlsx file. I can't open these, If they save them back to .xls, then they open on my Mac. Do I need to upgrade my Appleworks file?

  • Photoshop Elements 13 Editor not loading

    I have downloaded and installed Elements 13, and imported images into the organiser. When I try to load the editor, the message displays that it's loading, but does not go further than this.