There are colors on the screen when I try to take a picture. Please help.

Hi, I'm not sure if I'm in the right community but when I try to take a picture I look at the screen and it has a white line going through the top part of the screen. There are white spots all over the lens. There is blue and red parts in the camera. When you move the phone the colors move around. The camera is very blurry and is not focusing.

Sounds like software - Hope you have a recent back up already as with this issue do not really want to make a back up of the device now.
Will want to restore the iPhone and after restore 1st set up as New and test the camera after setting up as new.
If good then can try to restore from a back up. If still good, good. If notice same thing with camera after restoreing from a back up when that back up is no good, will have to erase all content and settings and continue with set up as new.
Good luck!

Similar Messages

Hello i have Iphone 5 but reccently it found the problem on lcd . there are somelines on the screen and i have a probelm with sms and dial No.s

Hello i have Iphone 5 but reccently it found the problem on lcd . there are somelines on the screen and i have a probelm with sms and dial No.s

Then you have to bring it back to the country you bought it from. Warranty is not International.

The screen on my powershot a2500 is black when I try to take a picture.

The screen on my powershot a2500 is black when I try to take a picture. Is there a fix?

Several items to check:
Are the batteries fully charged? Low batteries can display photos, but may not have enough charge to snap a shot.
Are you using flash? If the batteries are low, it may take some time for the flash to charge up and display the scene on the screen. The screen will stay black until the flash is ready.
Are you outside on bright sunny day with polarized sunglasses on? Try without sunglasses on if this is the case.
Has the camera been dropped at all? Even a soft drop can loosen up the ribbon cable that goes to the LCD screen.
Are you able to see the menus? If you can, try a camera reset to defaults in the tools menu to see if that clears it up. You may have accidentally changed a setting that turned the screen when shooting. If not, remove the batteries for a few minutes then press the shutter button for a few seconds. Reinstall the batteries and see if that cleared it up.
If none of these work, you may need to send it in for repair. You will need to decide if it would be worth it or not if it is out of warrranty.
Steve M.

I have an IPad 4. After updating the system, when I try to look at picture on Facebook and make it larger, there is just a "circle" in the middle of the page instead of the picture. Can anyone help me?

I have an IPad 4. After updating the system, when I try to look at picture on Facebook and make it larger, there is just a "circle" in the middle of the page instead of the picture. Can anyone help me?

Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

I have adobe15.8 safari Mac i Life and I now get the blocked plug-in on the screen when I try to play video. Very frustrating

I have adobe15.8 safari Mac i Life and I now get the blocked plug-in on the screen when I try to play video. Very frustrating

Hello audreyt92616051,
The 'Blocked plug-in' message is from Safari (Apple), not Flash Player. This either means you have an older version of Flash Player, or internet plug-ins are disabled in the browser. To verify internet plug-ins are enabled, Go to the Safari Preferences > Security and make sure the 'Internet Plug-ins' checkbox is marked. The exact location and wording may differ depending on your version of Safari.
To install the latest version of Flash Player, go to https://get.adobe.com/flashplayer and download the installer, taking note of the download location. After the download completes, exit out of Safari (and any other app you have that may use Flash Player), go to the 'saved to' location, launch the installer, and follow the prompts to install Flash Player.
Maria

I have adobe15.8 safari Mac i Life and I now get the blocked plug-in on the screen when I try to play video. Very fustrating

I have adobe15.8 safari Mac i Life and I now get the blocked plug-in on the screen when I try to play video. Very frustrating. What am I doing wrong??

Could you please visit https://get.adobe.com/flashplayer and follow the instructions to get the latest version? Once installed, please visit the Flash Player Help page and click the "Check Now" button. Your Flash Player version should now be 17.0.0.134 which is the latest version. That should fix the blocked plugin issue that you're running into.
Thanks,
Chris

I am having trouble bouncing and creating an aiff file that plays back. I've checked my output settings, and although I am able to create MP3s, the aiffs are blank. The happens when I try to export a track as an aiff file - it's blank.

I am having trouble bouncing and creating an aiff file that plays back. I've checked my output settings which appear to be correct. Although I am able to create MP3s, the aiffs are blank. The happens when I try to export a track as an aiff file - it's blank.

When bouncing, do you use the Key Command or the button on the Output Channel Strip? The Key Command only bounces from the Stereo Output. The bounce button bounces from the Channel Strip it is on. So if you want to bounce out outputs 3-4 or higher, don't use the key command, but the button.
The strange thing here is that Logic, when it bounces an MP3, first bounces an AIFF, which at the end of the bounce process is being converted to MP3, so I can't imagine how you can get a silent AIFF and a normal MP3.
How have you listened to those bounces? iTunes? Quicklook? Quicktime?

Ipod Nano 6th generation setting issue - hi, when i am listening music and the screen goes to sleep my music stop playing.Please help with settings

hi, when i am listening music and the screen goes to sleep my music stop playing.Please help with settings

No problem. And no worries, several people have made this same mistake!
Either way enjoy the iPod!
Brock

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

Hi Leo22,
Does this error occur if you use any of the example programs that come shipped with LabVIEW? I would try opening one of the examples that write data to Word and see if those give you an error. Also, have you tried just putting down a New Report.VI and change the report type to Word? If this simple vi (that's all you need to open Word) breaks, I would check to see if there are any instances of Word still open. Check the task manager to see if any word processes are still open. There should not be a problem accessing Word 2003 from LabVIEW 7.0. If neither of these solutions work, please give some more detail about your application and we can research further. Thanks!
Jeremy L.
National Instruments
Jeremy L.
National Instruments

I have a 4s and the camera keeps shutting down when I try to take a picture. What's going on? What is the solution?

I have a 4s and the camera keeps shutting down when I try to take a picture. What's going on? What is the solution?

Delete all data from following location on your machine and try updating again.
Mac OS: ~/Library/Application Support/Adobe/AAMUpdater/1.0/
Let me know if it works for you.
Regards,
Ashutosh

My illustator crashes when i try to save can you please help?

My illustator crashes when i try to save can you please help? im using Cs6

Archelass,
If the crashing happens when placing from/saving to new location with Yosemite, you maybe able to get round it by using the Adobe Dialog instead of the OS Dialog in the Place window (similarly for Save As in the Save As window).
If crashing happens when moving objects, the issue may be caused by the Chrome Pushbullet extension, see this post #3 by Matt with the solution,
https://forums.adobe.com/message/6984777#6984777
or by the Adobe Color extension, see this post #2 byhexxstatic with the solution,
https://forums.adobe.com/message/7095368#7095368
or by the cache on the computer, see post #5 in this thread by Booklover with the solution,
https://forums.adobe.com/thread/1696375
Or, when issues start to appear in general you may try the list.
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible), for CS3 - CC you may find the folder here:
https://helpx.adobe.com/illustrator/kb/preference-file-location-illustrator.html
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall (ticking the box to delete the preferences), run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

HT5035 I have a balance on my account from an ITunes card, but i cannot redeem it when I try to purchase music. Please help!

I have a balance on my account from an ITunes card, but i cannot redeem it when I try to purchase music. Please help!

Welcome to the Apple Community.
The total value of your purchase including any taxes needs to be less than the credit available or your credit card will be charged.

HT1199 Hai, i tried to open itunes on my windows 8 laptop but it comes out with 'iTunes has stop working' notification and need to close the program everytime i try to load it. Please help! thanks.

Hai, i tried to open itunes on my windows 8 laptop but it comes out with 'iTunes has stop working' notification and need to close the program everytime i try to load it. Please help! thanks.

Hi ajay-9,
Thanks for visiting Apple Support Communities.
The steps in this article can help if iTunes is quitting unexpectedly on your PC:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Cheers,
Jeremy

App crashes when I try to take a picture

I try to take a picture using google chrome or Instagram(it may also happen with other picture taking apps, it might have to do with the camera app?) and it crashes
Anyone experiencing this too?
I've already tried refreshing these apps and the camera app but ehh still closes

If the unit has NEVER been jailbroke, first try a system reset. It cures many ills and it's quick, easy and harmless... Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

Why can't my pics match color of the screen when printed?

Hi there.... Please help me with my frustation. I am using LR 2.6 and printing on a HP Photosmart B8550 on a MacBook laptop. I can't get the colors on the printer to match the screen. I have tried several profiles in the Color Management section of the Print Module (including Manage by Printer). The prints are all darker and not as vivid as the monitor shows. Although the levels in the histogram are OK, in order to get 'decent' color prints I have to increase the levels distorting the screen image.

so I have to assume its a basic flaw with lightroom
Actually it is certainly possible to print correctly with Lightroom. Almost all printers will just work. If they don't, you are either not setting up the driver right with the correct settings for ink density and paper type and/or are not using the correct color profile, or you have a really badly written driver for your printer that does not conform to standards. You can hack your way around the latter if you know what you are doing and get reasonable prints, but a new printer might simply be in order. In its quest for the best print quality and 64-bit compatibility with the latest Apple and MS operating systems, the Lightroom folks had to dump some of the old ways of doing things. The same thing happened with PS CS4. This unfortunately leaves some older and consumer oriented printers at the wayside.
Now all this is excacerbated by some bugs in the printing systems of both Apple's OS and Microsoft's, where printer drivers will often simply refuse to give up color managing prints, resulting in dark weird colors. I doubt this is your problem though as it mostly manifests itself when you are using your own printer profiles for different papers instead of the standard ones.

There are colors on the screen when I try to take a picture. Please help.

Similar Messages

Maybe you are looking for