There is a compatibility range mismatch between the Web server and database

HI,
Taken backup form production environment through TSM backup utility and restore same db on UAT environment by TSM Utility, after restore got below issue, past i had done many time but working fine this time
it’s not working. Production environment have SP2010 and sql server 2008 ,UAT have same thing also.
Server Error in '/' Application.
There is a
compatibility range mismatch between the Web server and database "Portal_Contain", and connections to the data have been blocked to due to this incompatibility. This can
happen when a content database has not been upgraded to be within the compatibility range of the Web server, or if the database has been upgraded to a higher level than the web server. The Web server and the database must be upgraded to the same version and
build level to return to compatibility range.
Description: An unhandled exception occurred during the execution of the current
web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.SharePoint.Upgrade.SPUpgradeCompatibilityException:
There is a compatibility range mismatch between the Web server and database "Portal_Contain", and connections to the data have been blocked to due to this incompatibility. This can happen when a content database has not been upgraded to be within
the compatibility range of the Web server, or if the database has been upgraded to a higher level than the web server. The Web server and the database must be upgraded to the same version and build level to return to compatibility range.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack
trace below.
Stack Trace:
[SPUpgradeCompatibilityException: There is a compatibility range mismatch between the Web server and database "Portal_Contain", and connections to the data have been
blocked to due to this incompatibility. This can happen when a content database has not been upgraded to be within the compatibility range of the Web server, or if the database has been upgraded to a higher level than the web server. The Web server and the
database must be upgraded to the same version and build level to return to compatibility range.]
   Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.ValidateBackwardsCompatibility() +542
   Microsoft.SharePoint.SPSite.PreinitializeServer(SPRequest request) +63
   Microsoft.SharePoint.SPWeb.InitializeSPRequest() +258
   Microsoft.SharePoint.WebControls.SPControl.EnsureSPWebRequest(SPWeb web) +365
   Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext context) +520
   Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.GetContextWeb(HttpContext context) +27
   Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea) +918
   System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +80
   System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +171
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| Twitter

Hi Bhavik,
UAT Portal_Contain DB version given below:
Version ID
Version
id
00000000-0000-0000-0000-000000000000
12.0.0.4518
1
00000000-0000-0000-0000-000000000000
12.0.0.6219
3
00000000-0000-0000-0000-000000000000
12.0.0.6327
4
00000000-0000-0000-0000-000000000000
12.0.0.6421
5
00000000-0000-0000-0000-000000000000
12.0.0.6510
6
00000000-0000-0000-0000-000000000000
12.0.0.6514
7
00000000-0000-0000-0000-000000000000
14.0.6123.5006
9
1A707EF5-45B2-4235-9327-021E5F9B8BB0
4.1.6.0
8
6333368D-85F0-4EF5-8241-5252B12B2E50
4.1.18.0
2
Production Version given below:
00000000-0000-0000-0000-000000000000
12.0.0.4518
00000000-0000-0000-0000-000000000000
12.0.0.6219
00000000-0000-0000-0000-000000000000
12.0.0.6327
00000000-0000-0000-0000-000000000000
12.0.0.6421
00000000-0000-0000-0000-000000000000
12.0.0.6510
00000000-0000-0000-0000-000000000000
12.0.0.6514
00000000-0000-0000-0000-000000000000
14.0.6123.5006
1A707EF5-45B2-4235-9327-021E5F9B8BB0
4.1.6.0
6333368D-85F0-4EF5-8241-5252B12B2E50
4.1.18.0
I have matched both are the exact same.
Run the below command on App server:
Upgrade-SPContentDatabase
cmdlet Upgrade-SPContentDatabase at command pipeline position 1
Supply values for the following parameters:
Identity: Portal_Contain
Confirm
Are you sure you want to perform this action?
Performing operation "Upgrade-SPContentDatabase" on Target "Portal_Contain".
[Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help
(default is "Y"):y
WARNING: Database [SPContentDatabase Name=Portal_Contain] cannot be upgraded.
Kindly suggest
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| Twitter

Similar Messages

How to mirror between the production server and the multiple local servers.

I am currently looking for the best way to correspond between our production server and the multiple local servers. Because the production server is the only server that holds the latest updating applications, and our local servers are located for each developer’s local machines where the all modifications and creations are done. So when the developer locally makes changes for assets or files, he creates a patch archive first, then accesses to the production side Administration console screen and imports them from Application Management screen.
We tried to find a way to see the imported date before (so we know which one has been imported as new.), but there is no show in the Administration console Application Management screen. There is Creation date but it’s set as we initially imported the full archive files, but not patch files. Since between applications have some types of the dependencies (like fragments or image files), what is the best way to keep mirroring between the production server and local servers? Or we should simply not use patch file for updating server?
Thanks,

Check out this utility : http://blogs.adobe.com/livecycle/2013/03/adobe-livecycle-configuration-migration-utility.h tml
Thanks,
Wasil

Setting up SSO between Sun Web Server and MS6.0

Hi,
I want to set up a trusted SSO between Sun Web server 6.1 and the MS6.0.The document does not give enough information about this.Any one done this before?
Thanks,
Ramnath

I'd recommend to cross-post your inquiry to the Security

Thunderbird stopped downloading emails from the web server and now when I try to add a new account I get a message to say it cannot find the email server.

Thunderbird was working and then for no reason it stopped downloading emails from the web server. I can access my emails in the web server okay. I have tried to remove my account and then add it again as a new account but I get a message saying that Thunderbird cannot find the email server. I have also tried to uninstall and reinstall Thunderbird but with the same result. I have also tried to remove the default mail server but have been unable to do so. How can I fix this?

I figured out a workaround.... Since I can get e-mails to populate via iSync and my other computer is running Leopard (it's a powerpc chip and can't run Snow Leopard), I added the account on the other computer and got the new account to populate into my SL machine with iSync. I don't like that I can't actually add the account directly, but at least this got me working.

Communication problem between external web server and SAP WebAS

Hello Experts,
We are having a serious problem over here where we had one external server is pushing XML string using a HTTP-POST request to our SAP WebAS server (a BSP application is handling this request). We are not able to see the request coming to SAP i.e. SAP-BSP is not receiving XML.
Also we found that, if request is routed through another proxy server (apache tomcat server redireting the request) connected through VPN to our network, it works but if the the same server is inside our network it doesn't. Rather in that case it never hits the Apache-Tomcat server itself.
We tried to identify the network issue but it seems it is not the network or any firewall issue. When we had a small Echo server (itu2019s a small Java server) running on our SAP machine, we could see the request coming in. So it is definitely reaching the SAP server but the SAP Web AS is not picking up. Rather what we found that if the URL is simple e.g. http://<hostname>:<port> it works but if the URL is complex like something generated by SAP incase of BSP application it doesn't.
Any idea what is causing this issue?
I tried to look at SMICM trace files but got nothing. Any idea where would find the trace of incoming HTTP requests to SAP WebAS?
Thanks in advance.
regards
rajeev

Hi Rajeev,
Pelase find the below link. i am not sure this is the exactly one for you. But i hope it'll help you.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417800)ID0350917650DB11174011760851503410End?blog=/pub/wlg/10285
http://www.sap-img.com/basis/basis-faq.htm
Regards,
CSK.

Create dev and test instances of Apex on the same server and database

I have a dev and prod instances of Apex on different servers. I want a test instance on the same server as the dev instance.
I am using workspace export/import so all instance workspaces have the same workspace id. The application ID is the same on each instance, in the same workspace. This allows pages to be exported/imported in the differenct instances.
My question is (I am sure it is obvious) can I have more than one instances of Apex on the same database (dev and test) and have each instance have identical Workspace IDs, etc.
Sam

Hi Sam,
But you can have more than one database on the same server.
What we do is create a separate database for each APEX versions we are supporting (we still have a customer using APEX 2.0).
All the databases are accessed with the same APACHE config. All you have to do is change the DAD and have a separate dad for each database (i.e. each APEX versions).
ex : /pls/apex_dev /pls/apex_test
This way , I can run different APEX versions on the same server.
Francis.
http://insum-apex.blogspot.com/

Mismatch between the bean code and generated code

Hello all,
I am running WL7.0Sp2 on Winnt4.0Sp6 connecting to Oracle 8.17. I have been running
my app on this server for a while (all my beans deployed ok, WL started up fine,
no problems). From last week, all of a sudden, I am getting the error attached
when I am trying to deploy just one bean (?). The weird thing is it deploys fine
in every other env. except fine (so I am guessing something must have gone awry
in my class path) but I cant figure this out?
Any ideas? suggestions?
Thanks
Sury
[deploy_error.txt]

To be sure, I'd recompile the jar and also make sure that
none of the Bean related interfaces are reachable from the
server's CLASSPATH.

Connection from the web server to the database which is situated in another machine.

Thanks for the reply.
I need to know, whether there shold be a physical connection between the web server and database machine? or can we connect to the database machine through the web, if the database machine has a domain name? if there is a physical connection, we can use the jdbc/odbc connection. but if we are connecting through the web, how can I estblish the connection using a JDBC/ ODBC connection?
Regards,
George

As long as there's a network connection between the two machines, you should be able to make the connection. I'm not sure what the difference between a 'direct connection' and a 'connection through the web' is-- are you actually running a network cable from one machine to another?
When you cannot make the connection, are you able to do a 'tnsping' on the target database?
When you say 'connecting through the web', is it possible that you're going through a firewall? If so, the firewall may be blocking the ports you need to communicate on.
Justin Cave
ODBC Development

Output mismatch between BEx query output and WebI Report output

Hi All,
I have a BEx query in which there are only characteristics placed in rows.
There are combinations of the values of the characteristics giving different records in the query output.
Date is one of the characterisctics in the query output.
There is an output mismatch between the query output and the WebI report output in the following case:
When there are 'Not Assigned' or '#' or blank values, there are additional entries(rows) in the WebI report, giving repeating or wrong entries in the Date field. This is incorrect data.
Is this because of the 'Not Assigned' or '#' or blank values of the Characteristics or is there any other reason?
How do I fix this?
Please helo me with this.
Thanks and Regards,
Srilakshmi B

Hi Rajesh,
I need to verify the WebI report output for records with # and 'Not assigned' values for the cHracteristics in the report.
So I cannot check the WebI report by hiding the # or Not assigned values.
The problem is that in the Query output the records are like these shown below:
Char1                    CHar2                          CHar3                       Date field
A                             B                                 C                                Date1
#(Not assgined)      #(Not assgined)      #(Not assgined)             No value
Where as the WebI report output is as below:
Char1                    CHar2                          CHar3                       Date field
A                             B                                 C                                Date1
#(Not assgined)      #(Not assgined)      #(Not assgined)            Date1
As shown here, there are wrong/repeating entries for the Date field in the WebI report output.
Please check this and let me know what could be the issue and how do I fix it.
Thanks and Regards,
Srilakshmi B

Encrypt communication between SharePoint Web App and SSRS

Hi
I have SharePoint 2010 in multi server farm. The SharePoint web app has SSL enabled. The Reporting Server (SSRS) is http URL.
So when the Report Viewer web part is used, the communication between SharePoint web server and SharePoint Reporting Server is unsecured. The existing SSL has hard coded hostnames and for business reasons we prefer not to modify it.
Does anyone know how can I make that communication secured? Do I need to apply new SSL for SP Reporting Services? Is there any other option?

This should get you off and running on SSL
http://technet.microsoft.com/en-us/library/ms345223(SQL.100).aspx
and if you haven't go SQL on SSL - ->
http://technet.microsoft.com/en-us/library/ms189067(v=sql.100).aspx
Stacy Anothersharepointblog.blogspot.com

Load balancing between application server and database

Hi,
is there any load balancing between the application server and the database? Consider we have a single instance of an application server that sends database queries from different clients to the database. Are the requests queued in some way at the application server, allowing to control the flow of the queries (e.g. queries from "more important" clients might be sent with a higher priority)?
Thanks for your help!

Hi Victor/Jim/Volker,
Thanks a lot for all the responses..
Just wanted to let you guys know that my installation finished successfully.
The thing which confused me was that my Qtime, Qdate and everything else was showing correct values..
Well, my problem I set the environmental variable PASE_TZ to the EST time zone on a SYS level using WRKENVVAR>F4>SYS and added the variable. I logged off and the sidofr logged off, but one user which should have logged off and didn't was the "SAPINST"(my installation user) which was logged in the subsystem TMKSVR00.
Even when I had closed the SAPINST installlation program, the user doesn't log off...it just sits there until and unless u shut him out of the system using the option 4 on wrkactjob for ending the JOB(SAPINST logged in the system below the TMKSVR00 subsystem)
So since the SAPISNT user never logged of, his environmental variables were not initilized properly, even after the changes...
This thought came to me almost after a 6 hours of wasting my time searching for notes here and there...
I think when u end/stop the install in SAPINST, the SAPINST user should log off the AS400 system, but I have noticed, it never does...although when u restart the installation, if u have noticed it shows you the log on for the SAPINST user in the TMKSVR screen...
Its kind of buggy, I would say...
I have noticed, that even when I log on to AS400 from home or from a remote PC using Emulator, it shows me logged in the subsystem and even after i have logged of, it still shows me there...
Anyway, thanks a lot guys...for all your responses..
Just wanted to let you know all.
Thanks
Abhi

Connection between BO Mobile Server and BOE

Hi All,
I have installed BO Mobile on the same machine which as Business Objects Enterprise.
Have the following questions
1. How the mobile server connect to the enterprise server? Let me know what are the steps needs to be done for the connection between the mobile server and enterprise.
2. How the connection between mobile server and proxy server
I gone through the installation and deployment guide of businessobjects mobile but it not clearer to me.
Kindly, help me out.
Thanks and Regards,
Yuvaraj.

Hello,
I have a similar scenario to that you have described, in order to test;
BOE and BO Mobi deployed on the same machine, no proxy. I am also using a BB simulator in order to test connecting.
I have installed the client s/w to the simulator device, but am unable to connect to BOE from the device.
Below is the info from each of the config files and device.
Can you tell me if there is a needed change?
1. VMS
$Id: server.config 28982 2008-01-03 21:52:21Z hmak $
config for VMS Server instance
VERSION = 6.0
[server]
SERVER_ID=VMS_SERVER
[comm]
BINDTO_PORT=11711
MANAGEMENT_PORT=11712
EXTERNAL_HOSTNAME=<BOE machine Name>
common across all VMS servers
INCLUDE_CONFIG_FILE = config/cluster.config
vim:noet
2. VAS:
$Id: server.config 27498 2007-10-01 19:12:19Z hmak $
config for Authentication Server (VAS) instance
VERSION = 6.0
[server]
SERVER_ID=AUTH_SERVER
[comm]
BINDTO_PORT = 11011
MANAGEMENT_PORT = 11012
EXTERNAL_HOSTNAME=<BOE machine Name>
common across all auth servers
INCLUDE_CONFIG_FILE = config/cluster.config
vim:noet
3. Handheld Connection Settings:
Mobile Server: <server IP Address>
Port Number: 11011
CMS Name: <BOE machine Name>
Auth Method: Enterprise

Selective Cache-control in the web server

I am using weblogic 8.1 as the app server and Sun one 6.1 as the web server
In my obj.conf of the web server we have this
PathCheck fn="set-cache-control" control="private"
This caches all the pages.
But I don't want some pages to be cached in our site.
For this, I tried setting "no-cache" for the "Cache-control " of the response hedear, in corresponding jsps. But the webserver configuration is overriding this.
This configuration set in the webserver should be applicable for all the modules except for some urls .
can anybody tell me how to make this selective cache-control configuration in the obj.conf of sun one web server.
or if there is any way to prevent the set up in jsp from being overridden this webserver ?
Also it would be great if anybody can explain, what are the services handled by the web server and the the app-server and how they interact with each other....

It's unfortunate that JSPs running in WebLogic can't override the default Cache-Control directives in Web Server. That's probably a bug in the WebLogic plugin. (It is possible for JSPs running directly on Web Server to override the default Cache-Control directives.)
As with any obj.conf directive, you can configure Cache-Control directives on a path-by-path basis. For example, the following would set Cache-Control: no-cache for /foo/*.jsp and Cache-Control: private for all other URIs:<Object ppath="/foo/*.jsp">
PathCheck fn="set-cache-control" control="no-cache"
</Object>
<Object name="default">
PathCheck fn="set-cache-control" control="private"
</Object>Information on obj.conf syntax, including how to configure separate objects for separate paths, can be found in the Syntax and use of obj.conf chapter of the NSAPI Programmer's Guide at http://docs.sun.com/source/817-6252/npgobjcn.html.
I'm not sure what you mean by "what are the services handled by the web server and the the app-server and how they interact with each other". However, it's worth noting that Sun ONE Web Server 6.1 is fully capable of running JSPs by itself; there's no need for a separate WebLogic server.

Want to initiate a batch job in the web server

Hello all!
I am using a tomcat server, Mysql database and jsp to perform some data manipulation. I would like to create a java class which could be initiated at specific intervals. My question is, even if we create a class which makes use of Java timer, where to keep the file(which folder in the web server) and what is the syntax to make sure that the file gets invoked without any user/administrator interaction?

Is anyone listening???????????????????????????????????????????????????????????????????????

Can I do automatic page refresh? How many of them can the web server take?

I'd like to ask this question in both short and (if you be so kind) in long form:
Short: Can a portion of my APEX page be set to refresh automatically ones every few minute? Not the whole page, just a portion. Would I have to use frames for that? Can they be invisible?
Long: I'd like to create a web interface, which would allow multiple users to track duration of some tasks. More importantly it has to allow other users to see each other's progress (which task somebody is on, how long he has been on it down to several minutes). I understand to server side of it. However, the client side presents a problem of information refresh. I want users to be able to sit without touching their mouses or keyboard and see changes for other users as they happen.
What do I mean by "as they happen?" Ideally, I'd like to present changes in real time. My brief research of Push HTTP technology, pointed toward Comet or Flash. However, I don't know much about web development and as of now, cannot commit too much time to learning new technologies.
The second best option, is to update information every couple of minutes. Two question arise here. First is the "short" question - please see above.
Let's say the page sections can be refreshed automatically. Then I have a question about the load. If I potentially get thousands of simultaneous users, each sending a refresh request every 2-3 minutes, how bad would be the load on the web server and on the network throughput. The amount of data passed can be small, but I am very concerned about the load on web server and the traffic. (I am planning to do virtual hosting with a web hosting company). Somehow I am not concerned about the load on the database (maybe I should be). All calculations will be put in a stored procedure, at least I can optimize it.
Any other suggestions on how to approach this client refresh issue?
Thanks a lot.

These answers are helpful but I still need more info. The first answer suggests putting html refresh tag. But that would refresh the whole page, wouldn't it? I just need to refresh one region. Can it be done with html tag?
I reviewed the Javascript code in the example referenced in the second answer. It showed that I can refresh a region using Javascript. It looks very nice. However, I need to refresh with data pulled from the database. I am not familiar with AJAX (need to lear JavaScript first) and I know that JavaScript cannot query database on its own. So I am not sure that this example is relevant.
What I need is: Only 1 region of the page needs to be refreshed every 5 minutes. The rest should "stay put." Everytime the refresh is performed the database will be queried for new data by means of stored db procedure. Do I need to jump through hoops to do that or is it fairly straightforward thing to do?
Thank you for your time.

There is a compatibility range mismatch between the Web server and database

Similar Messages

Maybe you are looking for