There is a problem connectiong to the specified reporting Server SCCM 2012 SSRS

hi,
I'm Trying to install reporting services point SCCM 2012, I configured the
site system role without problems, but when I tried to configure the report options I get this error:
"There is a problem connectiong to the specified reporting, please check the conection and make sure SQL Reporting Service is running on the especified server. "
The reporting service is running on remote server, I'm using SQL SERVER 2008.
Two Questions:
1: Which is the cause of the error?
2: Which right permissions must have the reporting services point account?
Thanks.

Are you allowing port 1433 through the firewall?
Which release of SQL Server are you using and have you applied the relevant minimum CU? Details here
http://sccmentor.wordpress.com/2013/12/31/sql-server-site-database-configuration/
Which version of SRS is installed? If 10.50.1600.1 you will need to get this updated to above 2500 level.
http://www.mssccmfaq.de/2012/05/15/srs-not-detected-as-running/
Cheers
Paul | sccmentor.wordpress.com

Similar Messages

Safari cannot open the page ~ The error was: "There was a problem communicating with the web proxy server (HTTP)

Help! I was cruzing along just fine and went out tonight only to receive the message above:
Cannot open Page
Safari cannot open the page
The error was: "There was a problem communicating with the web proxy server (HTTP)."
I have had all the Apple iPhone phone. Have never encountered anything like this.
All systems are GO as soon as I log on to wifi.
Can anyone help, please.

I am also fixed. I also loaded Onavo, but that was the other day ... this is what I did with the help of online chat with AT&T ...
I went to:
Settings
Wifi
I selected the network I was working on by hitting the blue arrow located on right side
At the detail page of that network I scolled down to the bottom to find HTTP Proxy boxes
I was on Off and changed it to Auto and it worked!
I was soo jazzed!!
Instructions said if it was already on AUTO, to change it to Manual and make your Port = 80 but I didn't have to do that!
YIPPIE!! I'm a new man!!
Go to settings -----> WI-FI -----> select the network you're using ------> hit the blue arrow located on the right-side of the network name (ie: show details of that network), this takes you to another page.
--------> at the bottom of the page you'll see "HTTP Proxy" boxes (located below the "renew lease" button) ---------------> change the proxy to AUTO. Note: if you're already at AUTO, change it to "Manual" and make your Port = 80.

Replacing the primary site server, SCCM 2012 R2

Hi,
Setup is currently SCCM 2012 R2 with the primary site server on Windows 2008 R2 on a Hyper-V VM with a separate physical SQL server on 2008 R2 (Windows and SQL). I'm not making any changes to the SQL server at this stage.
I want to completely replace the primary site server VM completely with a brand new VM using Windows 2012 R2.
I was looking to run the SCCM setup and using the Expand an existing stand-alone primary into a hierarchy option but it wont let me do that due to "The site code you specified should not be the same as the primary site's site code".
So seems this Expand an existing option isn't the right option for me?
Do I just add the new server in the SCCM console and add all roles and test and then delete the roles from the old server?
Thanks
EDIT: I have 7 Secondary sites, so I dont want to just start over by doing some sort of backup and restore to the new server unless someone can tell me that wont break my hierarchy.

a backup and recovery is the correct way to do this, but there are a few things you should keep in mind.
Do a backup of your current environment and shut everything down.
install new vm, ensure the configuration is identical, (dns, hostname, etc...); install the same software and pre-requisites,
do a recovery
check the following links on how to do a backup and restore:
http://www.windows-noob.com/forums/index.php?/topic/7403-how-can-i-backup-system-center-2012-configuration-manager/
and
http://technet.microsoft.com/en-us/library/gg712697.aspx

Since upgrade to Mac OS 10.7.2L , recurring error message: "There was a problem connecting to the server "servername". The server may not exist...etc."

Since upgrade to Mac OS 10.7.2 Lion, on MacBookPro, recurring (every minute or so) error message: "There was a problem connecting to the server "servername". The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network conneection, and then try again." (The server specified is no longer connected or used). The error message must be clicked twice to continue to work on the computer. Time Machine is switched off. No external disks are connected. Keychain entries for "servername" have been removed since the problem arose. Is there any way to prevent this error message?

I am having the same problem; have tried deleting some of the plist files as others suggested but to no avail. Tried turning off time machine - that didn't fix it either. Very dispappointing.

I'm trying to set up my Ipod, but when I go to sign in with an apple ID it says 'Could not sign in: there was a problem connecting to the server'.

I just bought a 3rd generation ipod touch. It was professionally refurbished. I'm trying to set it up, and everything seems to be working fine, until we get to the wifi. I live on campus and our wifi is username and password protected. I signed in and everything seemed to work fine, and in the top left hand corner I have all the bars for wifi. However, when I go to sign in with an apple ID it says 'Could no sign in: there was a problem connecting to the server'. I've tried turning it on and off again, tried signing on to our wifi again, but it all isn't working. What can I do?

I also encountered the same problem. Try using a different email address or try signing in later.

I'm trying to buy a book. The book is made in I-Photo and when I push buy book button it starts to process and than says-- There was a problem communcating wit the apple store " help"

I'm trying to buy a book I made in I-photo. I have made a 20 page book in I-photo and when I push the "buy book" button it starts to process and then pops up a sign that say'es There was a problem commucating with the apple store. Please try again. Help

Are you buying from the correct Print Products Store? If you are using the wrong store, your AppleID may not be valid.
Is the Print Products Store set correctly in iPhoto Preferences > Advanced? It should be set to the same country as your billing address and delivery address, and match the settings of the Apple ID you are using.
And you are using iPhoto '09 or '11, right? you can no longer buy books from earlier versions.
When you reenter your settings as LarryHN described, don't forget to enable Express Checkout. It is required.

There was a problem connecting to the server ... OS 10.8.4 + WD NAS

Dear all,
first my configuration:
iMac from mid 2012, MacOS X Mountain Lion, 10.8.4, iPhoto 09 v. 8.1.2 - all software updates done and up-to-date
MacBook Pro late 2011, MacOS X Mountain Lion, 10.8.4
NAS WD My Book World Edition II (white light), 2 x 1TB (configured RAID : 1TB mirrored), original firmware (01.02.14 with MioNet built on Thu Feb 9 14:11:48 CST 2012 ) NFS, AFP enabled
a win 7 laptop and plenty of other devices
everything on a LAN with GB router + WiFi
I have my iPhoto library on my iMac, but the photos (the originals) stored on the NAS. I have the option "copy photos to library when importing" disabled. So I guess iPhoto has a reference / link in the library to the original files.
Everything used to work fine until some weeks ago. Not sure what happened but suddenly I got the error message "There was a problem connecting to the server ... Check the server name or IP address, and then try again. ..." when I tried to import photos stored on my WD NAS. When I want to display any photo stored on the NAS - same thing.
Now I guess I have a bunch of gray hairs more while trying to get this fixed.
I tried so many of the tips posted everywhere including booting in save mode, deleting the .plist files (first I actually tried to clean them using Xcode first before deleting them), etc. I cleared out KeyChain. I removed all recent entries (folders) and recent servers from the "history". I tried to connect as guest or named user. There are also no "logIn items" pointing to the NAS. I even tried to disable / enable AFP + NFS on the NAS, not to mention countless restarts of all the machines
One other thing I noticed: Before that problem occured I was able to select the NAS in Finder and it would show me all the shares. When I selected one of them it was mounted automatically. When I select it now I get "connecting" for a loooong time and then "Connection Failed". Most of the time (not always!) however I am able to get in via "Go -> Connect To Server - smb://<nas server name>). And suddently after that also selecting the NAS in Finder shows me all the shares! Hoever even this not in 100% of all cases. I can replicate this from the iMac and the MacBook.
I do use an external HD for TimeMachine to back up my data (directly connected via USB). No issues there.
Not I really don't know what to do any more
Do you have any ideas? Did anyone ever get a response from Apple with a useful solution that really hit the core of the issue?
Thank you!

SOLVED!! and I want to share the solution which worked for me with everybody here. Ultimately I had to install nettalk 2.2 on my NAS as described here: http://mybookworld.wikidot.com/netatalk2-2-on-whitelight . A nice description on how to do that can be found here: http://forums.macrumors.com/showthread.php?t=1102423 .
One last remark: When asked about the "DHX2 login process", I opted to install the original version, so I can confirm this one works too.

"There was a problem connecting to the server" in iTunes after migrating to new mac

I have a problem that is driving me crazy with my brand new iMac. I see many other people posting similar issues, but none of the other solutions seem to work for me.
I had a MacPro and bought a new iMac, on which I used Migration Assistant to set up. So the new iMac is virtually the same as my old machine in terms of appearance and installed applications. Both machines have Mountain Lion 10.8.2. All software on both machines has been through Software Update and is fully up to date, as are the connected devices (iPhone and iPad).
The problem is with iTunes. Every time I start iTunes (I think at the moment it checks my two connected devices) I get a pop up dialogue saying:
There was a problem connecting to the server "MacPro".
The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.
This dialogue continues to pop up constantly as long as iTunes is open, interrupting my work and frustrating me no end. The old machine is of course turned off and indeed is not available -- but I can't find what on the new iMac is so desperate to connect to it.
So far I have tried completing erasing my iTunes library, deleting all the preferences, reinstalling iTunes from a fresh download of the dmg, safe rebooting several times with no peripherals connected at all, and deleteing other preferences like the Login Items, iPhone config and iPhoto. I have also cleared Recent Items from the apple menu and opened "Connect to Server" in the finder and cleared all servers from the dropdown menu.
Last night I also completely restored my iPhone from scratch to see if that would clear away the issue and I have connected both iPhone and iPad to go through any apps that have permission to write content to my computer and deleted all of them completely from the devices.
Nothing has changed at all after all that, and I have run out of ideas. Clearly there is something somewhere that has my old machine's name hard coded in it but I can't see any way to search for it. I would grep my Library folder but I think a lot of the files are binary so I'm not sure that would unearth anything. I've seen many posts saying that Apple phone support (which I would qualify for) can't help with this issue and so I have put off phoning them to simply run through all the things I've already tried.
Any advice that anyone could offer would be extremely helpful. I can't use iTunes at all like this as it disrupts everything I try to do on the new machine.
many thanks!!

Nothing at all? Can't anyone help with this issue at all? I would be grateful for any suggstions as it is driving me crazy. It happens every time I open iTunes and also every time I open Mail.

HT4628 my time capsule has stopped working - have a green light but get an error message saying "there was a problem connecting to the server..."

I noticed this week an exclamation mark on the time machine icon on the menu bar.
My Macbook, iPad and iPhone all connect to the network but i get "there was a problem connecting to the server..."
When I open the preferences the time capsule is off but turnign it back on sends me in a loop of selecting the Time Capsule device (which has a nice green light etc) and then getting the error messgae about being unable to connect. I've pulled the plug a couple of times (this has worked in the past) but no change.
Any advice would be welcome before I try a factory reset or have to return to Apple for repair (the one thing they are offering as the thing is only 5 months old)

I also noticed that when I go to finder I see two MacBook Air's that are in my name but have the number (2) and (3) next to the name.
That is a well known bug in Yosemite.
Try open System Preferences (gear icon on the dock)
Open Sharing
Edit back to the correct name for your Mac
This may...or may not help. But, it won't hurt.
The Mac's name may stay stable....or you may see (2), (3), etc again soon.
Be sure to restart both your Mac and the Time Capsule after you do this.

Error: there is a problem connection to the GPRS service in your registered home network, error trying to make data connection. this may be casued by a voice call, a wired activesync connection or inncorrect network setting

like 2 weeks ago i called in to att to see how much is the data plan and it would end up costing $30.
so i was like screw that. well they figured that i got a new phone replacing the LG shine. so they asked
for to call this number so they can recieve data which would updated the system that i have a plam treo 750.
ever since this conflict i can't send picture messages. i get that problem. everytime i attempt to send a picture
i recieve this.
- there is a problem connection to the GPRS service in your registered home network.
- then i get a test that says error trying to make data connection. this may be casued by a voice call,
a wired activesync connection or inncorrect network setting.
please someone help me.
btw. hard reset and soft reset did not work for me.
Post relates to: Treo 750 (AT&T)

problem fix, i had to call in. customer serivce. and when i called to ask about the plan. they blocked it. so i had to unblock my internet.
Post relates to: Treo 750 (AT&T)

It says that "there was a problem connecting to the server". What's wrong with this, and how can I deal with this problem?

I just got my new iPad Mini2, and when I choose "sign in with your apple ID", it says that "there was a problem connecting to the server". What's wrong with this, and how can I deal with this problem?

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

There is a problem communicating with the printer.

I have a Lexmark Interpret S405. I am using a MBP laptop with WiFi, running 10.5.8. I have a cabled (non-wifi) Linsys router. I am using an Airport Express.
I was finally able to get the WiFi light on the Lexmark to be static green after reinstalling the Lexmark WiFi setup and reconfiguring my Airport settings so that both the computer and printer see each other.
In fact, I even updated the driver from Lexmark's Web site last night and I watched the WiFi light on the printer blink green indicating that the installation of the driver update was being communicated to the printer.
However, when I print, it opens the print window and says first "Looking for S300-S400", then it says "Printer is now online". Then after about 10 seconds, I get this error: "There is a problem communicating with the printer. Make sure the printer is powered on and connected to the computer. Delete or hold the job and try again."
I've exhausted Lexmark's technical databases and couldn't find the answer here.
I've read that one possible solution was to delete all the printers from the "Print & Fax" system preferences window and re-add. That didn't work.
Lexmark says for: The printer communicating on a network; however, the printer is not responsive. Possible causes could be:
1. Your printer is associated with a network, router, or access point, but it is not your network.
2. A software process is blocked by a system security firewall preventing network communication.
3. You are logged into Virtual Private Network (VPN).
4. You are connected to a network but have decided to switch to a USB connection.
I don't have a VPN and have removed the USB cable, then restarted both printer and computer, and deleted printers in Sys Prefs, restarted, and still no solution.
I can print directly via USB cable, but want to print wirelessly.
Lexmark also says to enter my PIN (which I have pulled out from the print menu screen on the printer) in the System. That tells me a lot...
Network settings on the print window on the printer also tell me Signal strength is 5 (excellent) and that I am on the network my airport is on.
Message was edited by: Macman17

I bet this is too late but...
Are you trying to print through the airport express wirelessly or the built in wireless of the lexmark? If you want to use the airport express, there is no need to mess with the wireless printing on the lexmark at all. The airport express will be easy to set up, all the wireless setups through the printers are a pain.

I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
I don;t have the drive shared out at all at the moment, is this necessary? How do I do this if so?
I have attached the screen shots of all the settings.
Thanks again for your help.

On submit button type - There was a problem connecting to the server.

Hi,
Please give me a solution for server connection issue. I am new to the adobe live cycle designer ES4.
I created a web form use of adobe live cycle es4 v.11.0 to retrieve the data from web service method. So, I created the WSDL type data connection in data view menu to invoke the .asmx?wsdl service and connection is established successfully. Then, I dragged and drop a button from object library window to invoke the service method and changed the type as submit button. In the submit button URL, I given the web service url as eg. http://<localhost>:<port>/Web_serive.asmx?wsdl. Finally, I saved it has a PDF file.
When I click the submit button, a pop up window is openning as 'preparing for submit..' and 'Receving data..' and finally, it shows a pop up error message as 'An error occured during the submit process. There was a problem connecting to the server'. I tried all possiblities and if any bad english grammer, sorry for that.
Please give me a proper solution for this issue.
With Regards,
G. Prabakaran.

After trying these suggested actions several times success has not been reached.
I understand you are getting unable to connect to server error message on your printer. I would first unplug router and printer for about 1 minute. I would plug router up first then printer. I would then try to enable web services. If not successful and you get same error message. I would follow these steps.
1. Obtain your printer's IP address
a. This can be done by pressing the wireless icon on printer.
2. Enter the printer's IP address in a browser.
3. Select the network tab at the top of the page.
4. On the left select networking.
5. Select Network Address (IP)
6. Select Manual DNS Server
a. Manual Preferred DNS should read 8.8.8.8
b. Alternate DNS Server should read. 8.8.4.4
7. Select apply you might get a warning just select okay.
8. Try again to access ePrint.
Let me know how it goes.
I am able to print wirelessly to the printer, print through eprint, scan, and copy things. The only thing that is not working is the printer itself connecting to the hpeprintcenter.com.
Kyle

Popup window error message on a Mac .....There was a problem connecting to the server 172.17.0.22

I keep getting a popup error message on my mac "There was a problem connecting to the server 172.17.0.22"
How do I fix this problem

That is The moment you go to open a new website it will reappear and then you need to close it before I can access the website I want. …

There is a problem connectiong to the specified reporting Server SCCM 2012 SSRS

Similar Messages

Maybe you are looking for