Things that have to do after completing the code.

Hi experts,
I want to know wht the tools we shld use once the coding part is completed like
SE30,ST05 and SLIN. Will all these tools ar enough to check the performance of program , if at all any other tools are there and wht r they... and plz tell the purpose of each tool briefly.
Thanks in advance.

hi,
chk this also.
http://www.erpgenie.com/abap/performance.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
will be helpful for u.
Regards
Anver

Similar Messages

  • HT202157 I updated my 2nd gen apple tv and after completing the downloading and installing the software I got an itunes picture that means i have to connect it to iTunes,, can i skip this ? coz i don't have the mini usb cable

    I updated my 2nd gen apple tv and after completing the downloading and installing the software I got an itunes picture that means i have to connect it to iTunes,, can i skip this ? coz i don't have the mini usb cable

    No, if you have that picture it means the update went wrong and you need to restore via iTunes.
    AC

  • I updated my 2nd gen apple tv and after completing the downloading and installing the software I got an itunes picture that means i have to connect it to iTunes,, can i skip completing the downloading and instais ? because i don't have the mini usb cable

    I updated my 2nd gen apple tv and after completing the downloading and installing the software I got an itunes picture that means i have to connect it to iTunes,, can i skip this ? because i don't have the mini usb cable

    No, if you have that picture it means the update went wrong and you need to restore via iTunes.
    AC

  • How do I access files that have been recovered (after a Mavericks problem) with the .cca file extension

    How do I access files that have been recovered (after a Mavericks problem) with the .cca file extension

    First, to access documents you must use an app designed for that specific Document type. So Pages will not be able to open PDFs. The Documents app by Readdle can handle PDFs though. In the latter case, you'd open the app, click the menu icon at its top left, and click Open to go to your iCloud Drive. With Pages, if you had files outside the main Pages folder, click + then iCloud and navigate to the file's location.
    Matt

  • HT201250 my back up keeps giving me a message that "time machine could not complete the backup folder.  It just keeps popping up and I have to cancel it to continue using my computer.  Any thoughts on my problem would be appreciated.

    My computer keeps getting a message that "Time Machine could not complete the backup.  It continues, "Unable to complete backup.  An error occurred creating the backup folder.  I have to clear the pop up from my screen to continue using the computer.  It is getting very tiresome.  Any thoughts?

    Hi there dean93,
    You may find the troubleshooting steps in the article below helpful.
    Time Machine: Troubleshooting backup issues
    http://support.apple.com/kb/ht3275
    -Griff W. 

  • I installed the new version of iTunes today. It's 12.1.1. After completing the installation, including restarting my computer, I was no longer able to use Windows Internet Explorer. Has anybody else experienced this? If so, how did you fix Explorer?

    I installed the new version of iTunes today. It's 12.1.1. After completing the installation, including restarting my computer, I was no longer able to use Windows Internet Explorer. Has anybody else experienced this? If so, how did you fix Explorer? I was using Explorer 11 and Windows 7, installed on an HP Pavilion g series

    Never heard of that being caused by installing iTunes. Try asking on a Windows forum. This isn't a problem with iTunes or any other Apple product. If you believe it is, uninstall iTunes. If the problem persists, you'll have to seek advice on a Windows forum or contact Microsoft for support.

  • Problems printing a converted PDF which was converted to Word after completing the form

    Problems printing a converted PDF which was converted to Word after completing the form.  I have spent the last 3 hours trying to figure out what I am doing incorrectly.  I can't get it to print in either the PDF or Word file.  Please help, I need to complete this form and sent it NJ Department of Motor Vehicles Commission.

    Hi, make sure you are using the latest release of PDF program.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • Whenever i use pencil tool after completing the fig. the color change ............

    I am new to adobe flash cs3 . whenever i use pencil tool after completing the fig. the color changes to green .. even though the box indicates black  color ..

    See if you have outline mode selected for that layer, or if you have it set for the file.
    For the layer look at the last icon on the layer, the small square icon.  If it appears as a solid it is not in outline mode, if it appears as an outline of a square, click it to change it to be solid.
    For the file level, in the main toolbar choose View -> Preview Mode -> and make sure Outlines is not selected.

  • After completing the OS X Mavericks everything runs slow

    After completing the OS X Mavericks everything runs slow.  Programs, menus and files.  When I click on them it is like they hesitate to open.  Programs are slow at opening and working with them.

    First, back up all data immediately, as your boot drive might be failing.
    Step 1
    This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|timed? ?o' | tail | open -ef
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
    Step 2
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Reset the System Management Controller.
    Run Software Update. If there's a firmware update, install it.
    If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
    If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
    Step 3
    When you notice the problem, launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the View menu or the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
    Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
    Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
    Step 4
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • Dashboard Designer Error - You do not have sufficient permissions to complete the request.

    Hi all
    I have created a PerformancePoint Data Source library and a PerformancePoint Reports list on a SharePoint site. The PerformancePoint site collection and site features are also both activated. The data source library is in
    the 'trusted data soruces' list in administration. Existing reports I have created show OK on the site.
    When user, who has full control of the entire site, clicks "add a new item" in the BI Reports list, SharePoint launches Dashboard Designer OK.
    The problem is when Dashboard Designer loads, it does not load the existing data sources & reports. Clicking on the refresh icon results in the error:
    You do not have sufficient permissions to complete the request.
    If I add this user to the Site Collection Administrators list, the user can refresh and view the data sources & reports OK. Is this a requirement to create reports in Dashboard Designer? It is not acceptable to set all
    our report designer users as the site collection administrator.
    Cheers
    Tyson

    Hi,
    Have you also tried to assign rights using the technique mentioned in the above given document (i.e. using Dashboard Designer):
    Important To assign or change user permissions for dashboard items, you must have
    Full Control permissions. Although you can create and publish dashboard items with
    Design permissions, you cannot assign or change permissions for dashboard items unless you also have
    Full Control (Site) or Site Collection Administrator permissions.
    Use the SharePoint Permissions dialog box to assign or change user permissions for a dashboard item. You can open the
    SharePoint Permissions dialog box from Dashboard Designer or from the SharePoint list or document library that contains the dashboard item. The following sections describe both methods.
    Edit user permissions in Dashboard Designer
    In the Workspace Browser, click PerformancePoint Content or
    Data Connections, depending on the item that you want to modify. Then, in the center pane, double-click the dashboard item to open it for editing.
    In the ribbon, click the Home tab, locate the Item group, and then click
    Permissions. A browser window opens, which enables you to view or change the SharePoint permissions for the dashboard item that you opened.
    Use the SharePoint permissions dialog box to modify the user permissions for your dashboard item, and then save your changes.
    Edit user permissions in a SharePoint list or document library
    Locate the dashboard item that you want to modify in its SharePoint list or document library.
    Select the check box that is next to the name of the dashboard item. At first glance, you might not see a check box next to your dashboard item. The check box is visible when you put your cursor next to the
    Title column, which is located next to the name of the dashboard item. The ribbon appears in the SharePoint site.
    In the SharePoint ribbon, click List Tools, and then click
    Items. Locate the Manage section, and then click
    Document Permissions. A SharePoint Permissions dialog box opens. This enables you to view and change the user permissions for the item that you selected.
    Use the SharePoint Permissions dialog box to modify user permissions for your dashboard item, and then save your changes.
    Please tell us if this approach shows different permissions assigned and solves your problem.
    Thanks and best regards,
    Martin
    Martin W. Angler, MCTS
    Blog angler.wordpress.com
    Twitter: Follow me on twitter

  • Getting a 404 message for pages that the menus that have a french accent in the menu name, other pages display fine.

    Hello, Using muse June 2014 release. After uploading all files to Godaddy web hosting, all menu that have a french accent in the menu name are giving a 404 message page not found, whereas all my other pages that do not have french accents are displaying normally. For the time being, I have removed accents in 3 of the menus, but would prefer to show them. In earlier version of muse everything was working fine. I've also been getting this message: "MuseJSAssert: Error calling selector function:TypeError: $(...).toBrowserWidth is not a function" ; the header of the page shifts to the left of the screen whereas the body items stay centered.
    I've deleted everything on the web hosting ftp site and re uploaded everything but does not fix the problem.
    Thank you Dorene.

    I uploaded it within Muse "Upload to FTP hose".
    However, this morning when I was getting the error message "MuseJSAssert: Error calling selector function:TypeError: $(...).toBrowserWidth is not a function" ; my header was shifting left on some pages and not all and at this time I was not getting the 404 error yet. So I deleted everything from the root of the Godaddy web host and re uploaded and thats when it started giving me the error messages of page not found only on the pages with french accents in the menus. Could I have deleted something in the root that should stay there, but I'm thinking if it should not be deleted it would be locked. Thank you Zak for keeping with and and helping me find this problem. I'm helping out some friends with the new campground they purchased and I look pretty bad with these pages not showing up.

  • HT201442 My iPhone 4s hasnt been used in over 6 months. Everytime I plug it into my computer and iTunes, it says it requires a restore and update. It then comes up with an error after completing the download for the restore and update (takes around 10 min

    My iPhone 4s hasnt been used in over 6 months. Everytime I plug it into my computer and iTunes, it says it requires a restore and update. It then comes up with an error after completing the download for the restore and update (takes around 10 minutes).Someone help me as I'm using the original iPhone 3 at the moment and it won't even take an ios 7 update!

    Just to confirm on the screen of the iPhone do you see the itunes symbol with a cable pointing up to it?. If you do then your iPhone is inrecovery mode and would require you to restore it.
    Now first you want to make sure iTunes is up to date and the cable you are using is not damaged. You also want to make sure iTunes is up to date.
    Now if you get an error message then follow the article below to find out what causes the issue:
    http://support.apple.com/kb/TS3694
    In terms of the iPhone 3G that is definitely not able to update to iOS 7. Only the iPhone 4 and larter can update to iOS 7.

  • Why are events that have passed being erased in the calendar

    WWhy are events that have passed being erased in the calendar. I like to keep a record of what I have done on any given day, and the calendar keeps erasing things like doctor appointments, etc.

    Setting
    Mail, contacts and calendars
    scroll to the calendar part
    'sync events'. You can go back up to 6 months or 'all events'
    Just be aware that those events contribute to the 'other' that uses up your device's memory, so you'll want to balance the data you keep with the space you want to use

  • One thing that confuses me about contribute is the license

    One thing that confuses me about contribute is the license. I
    have a client who I am doing a website for and I want to recommend
    contribute. However I don't want them to have to buy 2 copies of
    the program because they are a man and wife who will both be
    editing the website. Is it ok for both of them to use it if it is
    installed on a PC and a laptop?

    The EULA suggests that it's OK to have it installed on two
    computers (office, home/laptop) for one user. How your client
    solves this is their case of course, but I think they will be
    creative enough to make it work without buying two licences
    :)...

  • AE what are those things that turns on and off in the Project

    AE what are those things that turns on and off in the Project

    I had was $1,000 credit in September of 2014.  In October, I called Digital Juice, because I had a stroke 25 years ago and I told him I would be foolish to give up $1,000 and join Platinum Account.  He agreed with me. He then said why don’t you join Platinum Account, and he can update the $1,000 to the account.  I said, OK.  Then about January 2, $1,000 was in the Platinum Account.  I am starting to do some Wedding videos, and I just noticed that the $1,000 credit wasn’t there. What happened to my $1,000?  Oh by the way, your Update Status only goes back to December and not back to July.
    Rich
    "Todd_Kopriva" <[email protected]> said:
    AE what are those things that turns on and off in the Project created by ( https://forums.adobe.com/people/Todd_Kopriva ) in After Effects - ( https://forums.adobe.com/message/7122815#7122815 )
    I don't understand the question. Please explain in more detail.

Maybe you are looking for

  • How to configure a full JMS Sender Adapter Scenario

    Hi guys, I have to do a JMS -> PI (7.1) -> File scenario, I never used JMS Adapter, and I'd like to tell you what I have done, and what I think is missing. First I went to the NetWeaver Administrator ->Configuration Management ->Infrastructure ->JMS

  • Problem with a resultset before a delete in a stored procedure

    We have been using the Microsoft provider in the past. However, we now need to use CLOBs, so we would like to move to the Oracle provider. However, we have several stored procedures that select some data out of a table, compile a result set, and then

  • How do I check if I need SAP GUI 7.10 Patch-Level 7?

    Hi, I have installed SAP GUI 7.10 client. After restarting the PC, I tried to install the Patch-Level 7 but I got the message: This SAP Front End Patch cannot be applied. Either this patch is already installed or the components to be patched are not

  • CA issue - Workstation signin "There was a problem verifying the certificate from the server"

    Hi, We have issues with all workstations on our domain. I just recently setup Lync 2013 server on a windows 2012 OS. When I went to test sign-in, I received a message "There was a problem verifying the certificate from the server". To fix this issue,

  • Trouble with Adobe Flash

    Hi Folks, The videos I get in my emails don't play. You tube does and some of the ones in my emails.it drives you nutsy!! Is anyone out there having this problem?