Third party dlls and jars with in jars.

Hi,
I have a application which uses several 3rd party jars and dlls.I want to create a executable jar for the application .I added the external jars using fat jar eclipse plugin. Iam able to run the jar on my system successfully.But on other systems the application doesnot launch as the dlls are not avaiable which is fairly understandable. It gives the following exception 'JarClassLoader: Warning: Unable to load native library: java.lang.NullPointerException'.Now i need to include these dlls into the jar so that i can distribute the application as a single jar and launch double clicking it.I know expecting dlls ignores the cross platform nature of java but i need it.please give me some idea on how this can be done.
Thanks in advance

Similar Messages

Using a third-party card and gateway with PowerBook Pismo

Hi,
My birthday present this year was an Apple PowerBook Pismo - the G3 400 model (full spec. below). It runs the latest version of Mac OSX (10.4.6 as below). Before I got the Pismo, I bought a Linksys WPC54G wireless card for my original laptop, a ThinkPad T23. This works fine with my Linksys WAG354G gateway, but I'm wondering if I can do the same with the Pismo, since original AirPort cards are still hovering at £70-£90.
My Linksys card is the revision-3 ie 'v3' version. It seems to be detected by my Pismo - running the AirPort setup wizard means it is detected and the access point is found. My network is protected with WPA (I think it's version 2) encryption, and AirPort asks me for the network password during setup. However, the next screen is blank - the screen that asks about base stations. Clicking 'Scan Again' does nothing, and I cannot continue. This was all with the original verison of Mac OS 10.4, by the way. I updated the Pismo last night, so I'll have a go with it. Since it is detected by AirPort, would I be correct in thinking the card has the Broadcom chip that is AirPort-compatible? It shows up in Apple System Profiler as 'Third-Party Wireless Adaptor,' if that helps.
Thanks in advance for your help,
Rob Johnson

You're quite welcome zwarbo.
Should you need it, the procedure (as I remember it, my Pismo's out of action at the moment) is as follows:
Insert the card into the 'Book and allow Mac OS to find it. Once the 'PC Card' symbol appears beside the clock, click on the symbol and read the drop-down menu. If it says something like 'Unknown brand - Network Controller,' the Pismo has found your card. Next, open 'System Profiler' (Hard Drive -> Applications -> Utilities). Point to 'Network.' If your card is working as expected, it should display 'AirPort Extreme.' If not, you may have a card using another brand of chip, since only cards using BroadCom chips are supported natively by Mac OS. It's hit-and-miss what chip you get in your card - there doesn't seem to be a general trend. My card has the FCC ID 'Q87-WPC54GV3' and the IC ID '3839A-WPC54GV3,' if this helps.
If it does show up as AirPort Extreme, here is the full procedure for setting up the card for your network:
- Open 'System Preferences'
- Head to 'Network'
- There should be an option, possibly in the drop-down box, to select 'AirPort.'
- You will then have the option of switching AirPort on.
- Select 'Only Join Preferred Networks'and either search for your access point, or manually input your router's details (the default IP address for the WAG354G is 192.168.1.1).
- Now, when you insert your card, AirPort should automatically switch on and connect to your network. Naturally, if you want to use your Pismo on the move, you'll have to uncheck the above and try another way. Enabling the 'Show AirPort Status' is useful, while you're there.
Take this as a rough guide. My Pismo has a battery problem, so I'm having it sorted. As such, I can't actually use it, so when the 'Book is back in action, I'll double-check the procedure (I don't posess another Mac other than an ancient iMac G3, long before wireless). The Mac should remember your WEP or WPA key, unlike the Linksys Windows utility, which is tempermental at best.
Hope this helps,
Rob Johnson

Anyone else have difficulty using third party software and websites with the new MacBook Pro with retinal display?

I just returned my new Mac book pro with retinal display after three very disappointing three weeks of trying to use certain websites and other third party programs (Quickbooks, Raintree) that would not function properly. My husband own the previous MacBook Pro version with the built in CD rom and I was able to use those above mentioned websites and problems with the no difficulties. Did I just happen to get a lemon or is this a function of the computer being too new for third party software?

Programs such as Quickbooks pro for Mac, I was able to import my previous data and I was able to enter about 5 new transactions before it stopped being able to save transactions. Other programs ( Raintree ) that I use via VM software as a windows based program I was able to access and use some features but not others. On the web browsers (both safari and Mozilla) I use a website that has an analyzer feature and it would pull up a blank screen in the place where I would enter pertinent information. They tried pulling this website at the apple store today and the same issue happened. All these programs and website I am able to access and run smoothly with no issues on my husbands MacBook Pro , which is why I returned my MacBook. I just wondered if others were experiencing similar issues with their MacBook with retinal display.

My wife has been having problems with Safari, and many third party software and malware programs infecting her Mac Book Pro.

My wife has been having problems with Safari, and many third party software and malware programs infecting her Mac Book Pro. I have tried to reset Safari but it keeps coming back, taking over Safari, changing defaults, start pages, and search engines, Etc.
Is it safe to use programs like MacKeeper, who keeps send my wife's computer message and alerts, or should I just wipe the drive and start over?
Skip

I am having lot's of lag time with Safari, etc..
I'll type in a website.. and it will take 15-20 seconds to start..
Start time: 17:51:37 12/02/14
Model Identifier: MacBookPro11,3
System Version: OS X 10.10.1 (14B25)
Kernel Version: Darwin 14.0.0
Time since boot: 14 days 3:02
USB
   My Passport 07B8 (Western Digital Technologies, Inc.)
Diagnostic reports
   2014-11-13 QuickLookSatellite crash x2
   2014-11-21 com.apple.WebKit.Plugin.64 crash
Log
   Nov 30 21:32:39 PM notification timeout (pid 345, Adobe CEF Helper)
   Nov 30 21:32:39 PM notification timeout (pid 99018, CEPHtmlEngine)
   Nov 30 21:32:39 PM notification timeout (pid 99019, CEPHtmlEngine He)
   Dec 1 09:09:03 [[0xffffff802bfa4000] OpCode 0x0C01 (Set Event Mask) from: kernel_task (0) Synchronous status: 0x00 (kIOReturnSuccess) state: 2 (BUSY) timeout: 5000] Bluetooth warning: An HCI Req timeout occurred.
   Dec 1 09:52:03 PM notification timeout (pid 266, Creative Cloud)
   Dec 1 09:52:03 PM notification timeout (pid 346, Adobe CEF Helper)
   Dec 1 09:52:03 PM notification timeout (pid 345, Adobe CEF Helper)
   Dec 1 10:04:37 process WindowServer[114] caught causing excessive wakeups. Observed wakeups rate (per sec): 170; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 12755007
   Dec 1 10:31:08 ALF: ifnet_get_address_list_family error 12
   Dec 1 10:59:17 process Meeting Center[2921] caught causing excessive wakeups. Observed wakeups rate (per sec): 647; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45104
   Dec 1 12:24:35 process com.apple.WebKit[4567] caught causing excessive wakeups. Observed wakeups rate (per sec): 297; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 76962
   Dec 1 14:31:01 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 397; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 53188
   Dec 1 14:43:52 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 224; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 150084
   Dec 1 14:47:34 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 332; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 222103
   Dec 1 15:03:29 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 214; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 370572
   Dec 1 16:38:03 SIOCPROTODETACH_IN6: utun2 error=6
   Dec 1 16:38:08 SIOCPROTODETACH_IN6: utun2 error=6
   Dec 1 20:08:30 jnl: disk3s2: replay_journal: from: 112328704 to: 113115136 (joffset 0x3a38000)
   Dec 1 20:08:30 jnl: disk3s2: journal replay done.
   Dec 1 20:27:11 com.adobe.acc.AdobeCreativeCloud.75292.UUID: Service exited with abnormal code: 5
   Dec 2 08:23:00 process com.apple.WebKit[11891] caught causing excessive wakeups. Observed wakeups rate (per sec): 161; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 527508
   Dec 2 09:29:37 firefox (map: 0xffffff80317c5960) triggered DYLD shared region unnest for map: 0xffffff80317c5960, region 0x7fff9ae00000->0x7fff9b000000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
   Dec 2 10:04:39 SIOCPROTODETACH_IN6: utun2 error=6
   Dec 2 10:04:44 SIOCPROTODETACH_IN6: utun2 error=6
   Dec 2 16:42:24 process com.apple.WebKit[26151] caught causing excessive wakeups. Observed wakeups rate (per sec): 153; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45002
Swap (MiB): 41556
Activity
   Net: 210 in, 20 out (KiB/s)
Memory: kernel_task (UID 0) is using 1632 MB
kexts
   com.cisco.kext.acsock (1.1.0)
   com.wdc.driver.USB.64.10.9 (1.0.1)
Daemons
   com.cisco.anyconnect.vpnagentd
   com.oracle.java.JavaUpdateHelper
   com.apple.installer.osmessagetracing
   com.microsoft.office.licensing.helper
   com.google.keystone.daemon
   com.wdc.WDSmartWareService
   com.oracle.java.Helper-Tool
   com.adobe.fpsaud
   com.wdc.SmartwareDriveService
Agents
   com.adobe.AdobeCreativeCloud
   com.zimbra.desktop
   com.citrix.ServiceRecords
   com.google.keystone.system.agent
   com.apple.photostream-agent
   com.genieo.completer.download
   com.genieo.completer.update
   com.cisco.anyconnect.gui
   com.citrix.ReceiverHelper
   com.citrix.AuthManager_Mac
   com.citrix.FMDAgent.14800.UUID
   com.oracle.java.Java-Updater
   com.fiplab.MailTabProHelper
   com.adobe.PDApp.AAMUpdatesNotifier.74724.UUID
   com.citrixonline.GoToMeeting.G2MUpdate
   com.apple.AirPortBaseStationAgent
   com.microsoft.SyncServicesAgent
Startup items
   /System/Library/StartupItems/ciscod/ciscod
   /System/Library/StartupItems/ciscod/StartupParameters.plist
Bundles
   /System/Library/Extensions/hp_fax_io.kext
   - com.hp.kext.hp-fax-io
   /System/Library/Extensions/hp_Inkjet1_io_enabler.kext
   - com.hp.print.hpio.Inkjet1.kext
   /System/Library/Extensions/hp_Inkjet4_io_enabler.kext
   - com.hp.print.hpio.Inkjet4.kext
   /System/Library/Extensions/hp_Inkjet8_io_enabler.kext
   - com.hp.print.hpio.inkjet8.kext
   /System/Library/Extensions/JMicronATA.kext
   - com.jmicron.JMicronATA
   /System/Library/Extensions/WD1394_64_109HPDriver.kext
   - com.wdc.driver.1394.64.10.9
   /System/Library/Extensions/WDUSB_64_109HPDriver.kext
   - com.wdc.driver.USB.64.10.9
   /Library/Extensions/hp_io_printerclassdriver_enabler.kext
   - com.hp.hpio.hp-io-printerclassdriver-enabler
   /Library/Internet Plug-Ins/AdobeAAMDetect.plugin
   - com.AdobeAAMDetectLib.AdobeAAMDetect
   /Library/Internet Plug-Ins/CitrixICAClientPlugIn.plugin
   - com.citrix.citrixicaclientplugIn
   /Library/Internet Plug-Ins/Flash Player.plugin
   - N/A
   /Library/Internet Plug-Ins/googletalkbrowserplugin.plugin
   - com.google.googletalkbrowserplugin
   /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
   - com.oracle.java.JavaAppletPlugin
   /Library/Internet Plug-Ins/npg.plugin
   - npg.graphon.com
   /Library/Internet Plug-Ins/o1dbrowserplugin.plugin
   - com.google.o1dbrowserplugin
   /Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
   - com.microsoft.sharepoint.browserplugin
   /Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
   - com.microsoft.sharepoint.webkitplugin
   /Library/Internet Plug-Ins/Silverlight.plugin
   - com.microsoft.SilverlightPlugin
   /Library/Internet Plug-Ins/SlingPlayer.plugin
   - com.slingmedia.slingplayer.plugin.nspapi
   /Library/PreferencePanes/Flash Player.prefPane
   - com.adobe.flashplayerpreferences
   /Library/PreferencePanes/FMDSysPrefPane.prefPane
   - Citrix.FMDSysPrefPane
   /Library/PreferencePanes/JavaControlPanel.prefPane
   - com.oracle.java.JavaControlPanel
   /Library/PreferencePanes/WDQuickViewPrefsPane.prefPane
   - com.westerndigital.quickview.prefpanel
   /Library/PreferencePanes/Zimbra.prefPane
   - com.zimbra.prefpanel
   /Library/ScriptingAdditions/Adobe Unit Types.osax
   - N/A
   Library/Address Book Plug-Ins/SkypeABDialer.bundle
   - com.skype.skypeabdialer
   Library/Address Book Plug-Ins/SkypeABSMS.bundle
   - com.skype.skypeabsms
   Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
   - com.citrixonline.mac.WebDeploymentPlugin
   Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
   - com.Google.GoogleEarthPlugin.plugin
   Library/Internet Plug-Ins/WebEx.plugin
   - com.webex.WebEx
   Library/Internet Plug-Ins/WebEx.plugin/Contents/Resources
   - com.webex.WebEx
   Library/Internet Plug-Ins/WebEx64.plugin
   - com.cisco_webex.plugin.gpc64
dylibs
   /usr/lib/libaudioc.dylib
   /usr/lib/libclipc.dylib
   /usr/lib/libcs.dylib
   /usr/lib/libdc.dylib
   /usr/lib/libfilec.dylib
   /usr/lib/libMonoPosixHelper.dylib
   /usr/lib/libpbr.dylib
   /usr/lib/libprintc.dylib
   /usr/lib/libsc.dylib
   /usr/lib/libSFFileMonitor.32.dylib
   /usr/lib/libSFIPC.32.dylib
   /usr/lib/libSFIPC.I.dylib
   /usr/lib/libSFsqlite3.7.4.dylib
   /usr/lib/libSFSyncEngine.I.dylib
   /usr/lib/libupc.dylib
App extensions
   it.bloop.airmail.beta10.Airmail-Today-Beta
   it.bloop.airmail.beta10.Airmail-Composer-Beta
   com.wunderkinder.wunderlistdesktop.sharingextension
   com.wunderkinder.wunderlistdesktop.todayextension
   com.readitlater.PocketMac.AddToPocketShareExtension
   com.stylemac.instadesk.Photodesk-Feed
   it.bloop.airmail.beta10.Airmail-Share-Beta
Apps
   /Applications/Uninstall IM Completer.app
Contents of /Library/LaunchAgents/com.cisco.anyconnect.gui.plist (checksum 1087717482)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>KeepAlive</key>
    <dict>
    <key>PathState</key>
    <dict>
    <key>/opt/cisco/anyconnect/gui_keepalive</key>
    <true/>
    </dict>
    </dict>
    <key>Label</key>
    <string>com.cisco.anyconnect.gui</string>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>ProgramArguments</key>
    <array>
    <string>open</string>
    <string>--wait-apps</string>
    <string>/Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app</string>
    </array>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.citrix.AuthManager_Mac.plist (checksum 1591517921)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>ServiceIPC</key>
    <true/>
    <key>MachServices</key>
    <dict>
    <key>com.citrix.AuthManager_Mac</key>
    <true/>
    </dict>
    <key>Label</key>
    <string>com.citrix.AuthManager_Mac</string>
    <key>WaitForDebugger</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/local/libexec/AuthManager_Mac.app/Contents/MacOS/AuthManager_Mac</ string>
    </array>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>Disabled</key>
    <false/>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.citrix.ReceiverHelper.plist (checksum 676087606)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.citrix.ReceiverHelper</string>
    <key>RunAtLoad</key>
    <true/>
    <key>KeepAlive</key>
    <dict>
    <key>SuccessfulExit</key>
    <false/>
    </dict>
    <key>WaitForDebugger</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/local/libexec/ReceiverHelper.app/Contents/MacOS/ReceiverHelper</st ring>
    </array>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>Disabled</key>
    <false/>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.citrix.ServiceRecords.plist (checksum 1445213025)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>ServiceIPC</key>
    <true/>
    <key>MachServices</key>
    <dict>
    <key>com.citrix.Beacons</key>
    <true/>
    <key>com.citrix.ServiceRecords</key>
    <true/>
    </dict>
    <key>Label</key>
    <string>com.citrix.ServiceRecords</string>
    <key>RunAtLoad</key>
    <true/>
    <key>KeepAlive</key>
    <true/>
    <key>WaitForDebugger</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/local/libexec/ServiceRecords.app/Contents/MacOS/ServiceRecords</st ring>
    </array>
   ...and 8 more line(s)
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 3453356730)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.oracle.java.Java-Updater</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
    <string>-bgcheck</string>
    </array>
    <key>StandardErrorPath</key>
    <string>/dev/null</string>
    <key>StandardOutPath</key>
    <string>/dev/null</string>
    <key>StartCalendarInterval</key>
    <dict>
    <key>Hour</key>
    <integer>9</integer>
    <key>Minute</key>
    <integer>57</integer>
    <key>Weekday</key>
    <integer>3</integer>
    </dict>
   </dict>
   ...and 1 more line(s)
Contents of /Library/LaunchDaemons/com.cisco.anyconnect.vpnagentd.plist (checksum 2630047092)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC -//Apple Computer//DTD PLIST 1.0//EN
   http://www.apple.com/DTDs/PropertyList-1.0.dtd >
   <plist version="1.0">
   <dict>
        <key>Label</key>
        <string>com.cisco.anyconnect.vpnagentd</string>
        <key>ProgramArguments</key>
        <array>
             <string>/opt/cisco/anyconnect/bin/vpnagentd</string>
             <string>-execv_instance</string>
        </array>
        <key>KeepAlive</key>
        <true/>
        <key>RunAtLoad</key>
        <true/>
        <key>AbandonProcessGroup</key>
        <true/>
        <key>EnableTransactions</key>
        <false/>
   </dict>
   </plist>
Contents of /Library/LaunchDaemons/com.wdc.SmartwareDriveService.plist (checksum 2733252498)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.wdc.SmartwareDriveService</string>
    <key>Program</key>
    <string>/Library/Application Support/WD SmartWare Services/SmartwareDriveService</string>
    <key>RunAtLoad</key>
    <true/>
    <key>StandardErrorPath</key>
    <string>/dev/null</string>
   </dict>
   </plist>
Contents of /Library/LaunchDaemons/com.wdc.WDSmartWareService.plist (checksum 1153517838)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.wdc.WDSmartWareService</string>
   
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/WD SmartWare Services/SmartwareServiceApp.app/Contents/MacOS/SmartwareServiceApp</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StandardErrorPath</key>
    <string>/dev/null</string>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.genieo.completer.download.plist (checksum 1894818845)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.genieo.completer.download</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
    <string>-trigger</string>
    <string>download</string>
    <string>-isDev</string>
    <string>0</string>
    <string>-installVersion</string>
    <string>15886</string>
    <string>-firstAppId</string>
    <string>19340001</string>
    </array>
    <key>WatchPaths</key>
    <array>
    <string>/Users/USER/Downloads</string>
    </array>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.genieo.completer.update.plist (checksum 2339121592)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.genieo.completer.update</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
    <string>-trigger</string>
    <string>update</string>
    <string>-isDev</string>
    <string>0</string>
    <string>-installVersion</string>
    <string>15886</string>
    <string>-firstAppId</string>
    <string>19340001</string>
    </array>
    <key>StartInterval</key>
    <integer>86400</integer>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.microsoft.LaunchAgent.SyncServicesAgent.plist (checksum 3051698494)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>KeepAlive</key>
    <false/>
    <key>Label</key>
    <string>com.microsoft.SyncServicesAgent</string>
    <key>OnDemand</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Microsoft Office 2011/Office/SyncServicesAgent.app/Contents/MacOS/SyncServicesAgent</string>
    </array>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.zimbra.desktop.plist (checksum 3676173668)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
           <key>Label</key>
           <string>com.zimbra.desktop</string>
           <key>ProgramArguments</key>
           <array>
                   <string>/Users/USER/Library/Zimbra Desktop/bin/zdesktop</string>
                   <string>start</string>
                   <string>-w</string>
           </array>

Problems with third party package and file access

I am using a third party package that allows me to decode
multipart forms that I use to upload files to our server.
I have been able to write my own code (JSP) that both reads and
writes to our filesystem. However, when I try to upload a file
using the third party package the method I am using fails with
the following IO exception: The error message is "access is
denied." But the files get written and are usable (even binary
files). I have checked the directories and all the dirs I am
writing to have read, write and execute permission.
I have access to the code so when I duplicate the actual
methods used for writing (FileOutputStream.write(foo)) in my
JSP, it writes fine without exceptions. In fact, I use
FileOutputStream.write() in other code and it works fine. My
question is: why would FileOutputStream work in packages we have
developed and not in a third-party package. I have added the
codebase and filePermissions to <weblogic_home>\weblogic.policy
without any changes.
I am running WLS 5.1 and NT 4.0 with SP5.
Does this problem sound familiar to anyone?
thanks for any and all help,
saulj

HI Mike,
If you have third party Document Management System, then you can post two different message, i.e. service order in transaction details of the third party tool with link to document which would be posted to third party Document management server.
If you don't have third party document management system and what to use sap infrastructure, then you don't need to maintain attachment, maintain the link between the third party tool and SAP document repository, with some login utilities.
Best Regards,
Pratik Patel.
Reward with points if it is of any help to you!

How to integrate third party API and DLL

Dear sir/Madam
How can i integrate the third party high level API and DLL into my DLL, project keeping in view that all their functions and their definitions kept hidden. i have tried it but when importing the functions in the DLL and export the high level functions, compiler demands their declarations and prototypes.
Is their a way to hide all these high level functions and still utilize them.
thanks, regards
Zafar

Hi Matrix39,
The compiler will still need the proper prototypes for the functions called in the third party DLL to compile your DLL whether you are using explicit or implicit linking to call the functions. Declaring these prototypes in your DLL does not mean they will be exported by your DLL. The functions exported by your DLL can be configured by navigating to Build»Target Settings in CVI. From here you can configure what functions your DLL exports by clicking the Change... button in the Export section. There are several options for specifying the functions including using header files and manual export declarations. See the CVI Help for more information.
Justin D
Applications Engineer
National Instruments
http://www.ni.com/support/

Where is the right path to deploy third party DLL? "Support Files"?

Hi, After Effetcs developers:-)
Here is question about install path of DLL for After Effects plug-in.
I'm developing Effects plug-in run with CUDA, so I have to deploy third party DLL to client PC.
So where is the right path to put DLL such as cudart32_30_14.dll?
I think it's under "Support Files", because my plug-in runs with cudart32_30_14.dll
in "C:\Program Files\Adobe\Adobe After Effects CS4\Support Files"
Am I right?

well... that depends.
when you rely on an external library, the external dll is expected to be somewhere along the path, as it appears in the command prompt.
places like win32, and sxs folders are in that path.
you could also put the support dll in the same folder as your plug-in. any process automatically includes it's own directory in the search path.
if you don't want to put it in any of these pre-set locations, then you have to program the path into the dll loading function.
if you choose to do that, you can put the support dll anywhere you like.

How to add third party dll in our installer using application builder?

Hello friends,
I have one application (VI) which is using some third party dll of protocol and now I want to make a installer which should install dll along with application exe. Please suggest the way ..
Thanks
Solved!
Go to Solution.

Hi,
I placed it in project file and included it in category of "Always Included" in exe creation. Then after i created installer with needed NI drivers. But this installer didn't registered the dlls in project file. I registered it manually using regsvr32 command..
Any help to do it automatically during installation..
To brief my words, I need help to understand the process of third party dll registration during installation of installer created by application builder..
Thanks

Deploying third party dll from solution

Hi,
I am creating a visual webpart in which i have added the Telerik RadGrid.
I have added the Telerik.web.UI dll in the Reference and is refered from the GAC. I have build the solution and grid works fine in my local dev environment.
I would like to know how to package the solution, so that the third party dll is also added to the GAC and to the safe controls.
How to achieve this? If possible, please elaborate the steps.
Thanks

Hi Mahindrakar,
I have used the right name of the dll in my code. I didn't understand, what you are saying about readme file ?
I getting the following error with
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
Certification.VisualWebPart1.VisualWebPart1UserControl.Page_Load(Object sender, EventArgs e) +187
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +24
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +41
System.Web.UI.Control.OnLoad(EventArgs e) +131
System.Web.UI.Control.LoadRecursive() +65
System.Web.UI.Control.AddedControl(Control control, Int32 index) +349
Certification.VisualWebPart1.VisualWebPart1.CreateChildControls() +154
System.Web.UI.Control.EnsureChildControls() +145
System.Web.UI.Control.PreRenderRecursiveInternal() +60
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3393
One thing, i know very well, only problem in adding reference only.
The above thing may helpful for you, giving me solution.
Thanks
Aasai.

Third party apps and peripherals to blame?

I am wondering what applications and external add-ons are working and which ones are not?
It appears to me a lot of people are having problems with external hard drives and previously installed applications.
I did a clean install and have only added Apple programs so far (iLife, iWork). I am hesitant to add any other programs for fear of messing up my install, or worse... my Macbook.
The big question is who did the research and development (lack of) on Leopard.
It is beginning to look more and more like Apple focused all it's attention on perfecting the OS and left all the responsibilities for software compatibility to the third party software developers.
Bad idea. Companies that make software for Apple computers are catering to a far smaller market than our PC brothers, which leads me to believe they do not have the resources to insure 100% compatibility. Apple should have anticipated this and performed more testing.
When I installed Roxio Toast 7 I could not burn a disk image. Shortly thereafter my superdrive stopped working completely. I found out from other posts, that you need version 8, or an older version of 7 to get it to work. On Roxio's website there is no mention of this at all. No a peep.
Apple had a few years to check compatibility and work software engineers to make sure their products worked on Leopard.
I further confirmed my suspicions when I visited the apple store today. I was there because my superdrive stopped working. After I installed Leopard and started to re-install my applications (Office, Toast), the drive quit accepting disks. They replaced the drive while I was at the store. By the way they said it was a coincidence. Mmmm.
While I waited (Fantastic customer support by the way, even on a Sunday) I noticed all the computers in the store happily running Leopard without a hitch. I looked deeper and found little or no third party software installed. External hard drives and cameras appeared to be working fine, but with no added software.
My suggestion is be real careful with what you install.
To Apple... Pleeeaaase test your products more thoroughly before sending them out the door. It may not be your responsibility, but if there are known issues then they should be disclosed.
On the other hand how sad it that... Imagine- "To install our software you must take the weekend off, back up all your data, delete all third party apps, and hope you hardware works with our new OS. Some of you will be lucky and others will not. Meeting our system requirements does not really guarantee anything... Good luck".

It seems they deleted my post from discussions. Thanks.

Third Party Wall and Car Chargers for ZV

Hi all. I was wondering if anyone has had any experience with the third-party wall and car chargers that are available on Ebay? I just purchased a Vision: M yesterday and was wondering if I should purchase a bundle pack off of Ebay with a case, chargers, TV cables, and sync cable? Or if I should only purchase the skins off Ebay and get a genuine Creative charger? I love the unit already (I have been a Creative customer for 6 years) but fi've hours via USB is too long a charge cycle for me...
Any help is greatly appreciated.
Regards,
Fenian

encase makes a combo unit. can be used with USB port, with cigar lighter in vehicle, or 120V wall plug. Quality stuff!

Third-Party Licensing and Activation Toolkit for Labview 8.5

There is any Third-Party Licensing and Activation Toolkit for Labview 8.5 as LV2010. PLS help..
Solved!
Go to Solution.

I know what you are asking and in the other thread, you were told it was for 2010 only. There is some support for 2009 but not for your old version. Go with the dongle suggested or upgrade your version of LabVIEW.

Third party shipment and dropship differences

Dear all,
I have several questions on the following and it is always confused me:
1 - Is there a difference btw the Third Party Shipment and the Third Party Dropship? or are they actually means the samething? if not, please tell me the differences?
2 - May I know in what step of the above two processes does the MM functional come into the picture? (i.e. what part of the above process are own by MM).
Thanks.
tuffy

Hi Tuffy,
In Third party dropship scenario, customer give an order from your e-trade site or online sales site. after receiving the order, your contracted company with you will deliver the order, not you. you are adding your profit to the list pricing. Process is going below:
customer >> shopping from you >> payment to you >> getting the amount of profit after sales >>> sending of order and delivery information about customer to contracted company >> contracted company will deliver th order to the customer.
But in other type of third part sales, we sould create purchase order additionally.
I hope these will clarfy your confussion.
Regards,

Third Party Items and Receiving Calendar

Hi Gurus,
I have a question about third-party items and receiving hours. I've searched this forum, OSS, and other sources, but I'm stumped.
First some background: our company ships product from stock and third-party items. For each customer we maintain a single unloading point, and the receiving hours for this unloading point are the days the customer is open.
For stock items, we have transportation scheduling switched on. SAP determines the delivery date for these items based on the route and the receiving calendar.
For example, assume an order is placed on Monday 9/24, we are using a 1-day route, and the customer is only open on Fridays. The system will schedule the delivery for Friday 9/28 - based on the customer's receiving calendar.
For third-party items we have a committed 1-day delivery time from our vendors. My problem is that in this case SAP does NOT consider the receiving calendar. For example, if an order is placed on Monday 9/24 and the customer is only open on Fridays, the system will schedule delivery for Tuesday 9/25.
This is a big issue for us because we drop-ship refrigerated product to the customer. If the product arrives on a day the customer isn't open, it will be damaged.
Does anyone know how to get SAP to consider the customer's receiving calendar for third-party items?
Thanks
Rick

Hi Navneetha,
Thanks for d reply.
I hv checked d mentioned tables and Itm Categories nothing is +ve there. All 3 itms hv TAS itm category. Also I agree with ur MIRO statement.
I found one thing which might b d cause plz check.
As we knw dat we cant change the schedule ln date and quantity once the Pur. Requisition created. and we cant make changes in sales order itm line if the PO is created for that Pur. Requisition. Bcoz afteward the PO wont be updating the Pur Requsition and sales order automatically.
But here the schedule line date at d schedl ln category for itm 2 is changed by a certain Batch job after the PO cration.
Therefore I think this wd b d reason that the item line 2nd is not getting updated in sales order from the PO and looks open.
The change of schedule line dates is not maintained in the PO manually ever.
So would it b d reason for the inconsistent doc flow updates and 2nd item being open as not invoiced yet?
regards,
Sandesh

Procurement cycle in third party order and stock transport order.

please provide me in steps the procurement cycle in third party order and stock transport order.

Hi,
STO Process: -
1.Create a vendor for the company code of receiving plant, using account group :0007 using T-Code XK01.
2. Assign this vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
3. Create internal customer with the sales area of the vendor. Go To XD01
4. In Pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
5. Maintain condition records for the relevant pricing condition.
6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
Assign the document type NB to supplying plant and receiving plant
10. After all settings , Create the STO using T-Code:ME21N and maintain pricing conditions of freight and Save.
11. Create Delivery :VL10G
Click on the Background Button after selecting line item
A message is flashed : See log for information> next Click on Log for delivery creation Button >click on line item>click on document button to get Delivery document No
12. Picking, PGI:VL02N
13. Billing:VF01
Save the document and its done
14. J1IIN - Outgoing Excise Invoice
15. MIGO - Goods Receipt against outbound Delivery
16. J1IEX - Capture & Post Excise Invoice
Pricing configuration for STO: -
In SPRO > MM > Purchasing > Conditions > Define Price Determination Process > Define Schema Determination > Determine Schema for Stock Transport Orders > Here assign Calculation Schema "RM2000" i.e. Stock Transfer Document to Schema Grp Pur. Org, STO Type (For e.g. UB) and Supplying Plant.
Calculation Schema "RM2000" has condition type P101 which will pick up the MAP of supplying plant automatically during creation of STO in ME21N ("Conditions" Tab).
You can create new freight / delivery cost conditions in M/06 and assign in pricing procedure "RM2000" in M/08 and also assign the Accrual Key to this and do the Account Determination for this Accrual Key in OBYC
At the time of PGI, following accounting entry will get generated;
Stock A/c - Dr - 110 INR (Receiving Plant)
Stock A/c - Cr - 100 INR (Supplying Plant)
Freight Clearing A/c - Cr - 10 INR (Supplying Plant)
Third Party Process Flow: -
1) MM01 - General Item category Group should be BANS in basic view of material master.
2) VA01 - Creation of sales order with VA01 transaction in SD module
3) When sales order is created system automatically creates a PR for the material with item category as "S"--> Third Party Item
4) ME21N - Directly PO with item category as "S" and delivery address as customer address
5) MIGO - Statistical GR by MM ( When it is made goods are received and delivered)
6) MIRO - Invoice by MM for vendor
7) VF01 - Billing by SD on Customers

Third party dlls and jars with in jars.

Similar Messages

Maybe you are looking for