Third party IS provider

Hi people.
I'm working for a midsize company and we need a new IS.
I think that an IS that can handle process like billing, inventory, collecting, etc could be a start and then customize it to allow all the requirement of the company.
The policy for IT in our company require that the new system should be created in Oracle Developer.
Could anyone suggest me a few options?.
Thanks

How about looking at Oracle E-Business suite.
A list of the modules here:
http://www.oracle.com/applications/
I think the one you are looking for is:
http://www.oracle.com/applications/B2B/OrderManagement/index.html?intro.html

Similar Messages

AccessControlException with third party JCE provider

Hi,
I have a third party cryptographic provider that I must use.
I can't tell if the provider is failing to load or if actual operations are denied. All I do know is that everytime it tries to actually do anything it fails with (the class that subclasses Provider is called IAIK):
Caused by: java.security.AccessControlException: access denied (java.security.SecurityPermission putProviderProperty.IAIK)
at java.security.AccessControlContext.checkPermission(AccessControlContext.java:270)
at java.security.AccessController.checkPermission(AccessController.java:401)
at java.lang.SecurityManager.checkPermission(SecurityManager.java:542)
at java.lang.SecurityManager.checkSecurityAccess(SecurityManager.java:1698)
at java.security.Provider.check(Provider.java:341)
at java.security.Provider.put(Provider.java:303)
at iaik.security.provider.IAIK.a(Unknown Source)
at iaik.security.provider.IAIK.<init>(Unknown Source)
It seems to me that the provider is trying to programmatically load and register itself. Obviously I have to grant permission to do this, but I don't know how, because I don't know exactly what its trying to do.
I did find something in the JDK docs mentioning doing something like this to the server.policy:
grant codeBase "file:C:/Sun/AppServer7/domains/domain1/server1/lib/*" {
permission java.security.SecurityPermission "putProviderProperty.IAIK"
But this not only doesn't work, I also need to understand it.
I've tried using it as a standard extension and it still doesn't work.
Would appreciate any pointers here
Thanks
Sam

Hi ,
I am using SUN ONE application server and I have a third party cryptographic provider that I must use(BouncyCastleProvide). I've modified server.policy, java.policy files but nothing helped.
// These permissions apply to the RD application
grant codeBase "file:C:/Sun/AppServer7/domains/domain1/server1/lib/*" {
permission java.security.AllPermission;
Please help.
Thanks
INFO: CORE3282: stdout: [02/Mar/2005 14:22:08:866] error: |AESEncryption|prepareMap|1|oSecretKey_file: /WEB-INF/config
/secret_asn1.key
INFO: CORE3282: stdout: [02/Mar/2005 14:22:08:866] error: |AESEncryption|prepareMap|1|oGenrateKeys: no
INFO: CORE3282: stdout: [02/Mar/2005 14:22:08:897] error: |AESEncryption|AESEncryption::Constructor|1|java.security.Ac
cessControlException: access denied (java.security.SecurityPermission putProviderProperty.BC)
INFO: CORE3282: stdout: at java.security.AccessControlContext.checkPermission(AccessControlContext.java:270)
INFO: CORE3282: stdout: at java.security.AccessController.checkPermission(AccessController.java:401)
INFO: CORE3282: stdout: at java.lang.SecurityManager.checkPermission(SecurityManager.java:542)
INFO: CORE3282: stdout: at java.lang.SecurityManager.checkSecurityAccess(SecurityManager.java:1698)
INFO: CORE3282: stdout: at java.security.Provider.check(Provider.java:384)
INFO: CORE3282: stdout: at java.security.Provider.put(Provider.java:339)
INFO: CORE3282: stdout: at org.bouncycastle.jce.provider.BouncyCastleProvider.<init>(BouncyCastleProvider.java:52)
INFO: CORE3282: stdout: at com.sp.fwk.golden.encryption.AESEncryption.<init>(AESEncryption.java:48)
INFO: CORE3282: stdout: at com.sp.fwk.golden.encryption.AESEncryption.getInstance(AESEncryption.java:71)
INFO: CORE3282: stdout: at com.sp.fwk.golden.presentation.FwkServlet.init(FwkServlet.java:72)
INFO: CORE3282: stdout: at javax.servlet.GenericServlet.init(GenericServlet.java:258)
INFO: CORE3282: stdout: at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:921)
INFO: CORE3282: stdout: at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:658)
INFO: CORE3282: stdout: at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:229)
INFO: CORE3282: stdout: at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
INFO: CORE3282: stdout: at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
INFO: CORE3282: stdout: at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
INFO: CORE3282: stdout: at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:203)
INFO: CORE3282: stdout: at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
INFO: CORE3282: stdout: at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:157)
INFO: CORE3282: stdout: at com.iplanet.ias.web.WebContainer.service(WebContainer.java:598)

Can you specify third party JMS Provider in Weblogic appserver configuration

          Can you specify third party JMS Provider in Weblogic appserver configuration ???
          Only place i know of is that you can specify third party JMS Provider in MDB configuraion.
          DOES Weblogic has some kind of configuration files where you specify JMS Provider
          info (Like you can do that in JBOSS)


You can also specify a third-party JMS provider using the Messaging Bridge,
          which transfers messages from one queue or topic to another.
          And in general, inside WLS you can use any JMS provider you wish anywhere
          that you can also use WLS JMS. In an upcoming release, there will also be
          some support to make foreign JMS providers a little easier to configure.
          But why would you want to use another JMS provider anyway? ;-)
          greg
          "Neeru Munjal" <[email protected]> wrote in message
          news:[email protected]..
          >
          > Can you specify third party JMS Provider in Weblogic appserver
          configuration ???
          >
          > Only place i know of is that you can specify third party JMS Provider in
          MDB configuraion.
          > DOES Weblogic has some kind of configuration files where you specify JMS
          Provider
          > info (Like you can do that in JBOSS)

Third-party push provider server

Hi there!
Does anyone know a good third-party push provider server?
I'm going to implement custom (with text) push notifications for my DPS applications.
Currently I have short list of push providers
urbanairship.com
parse.com
flurry.com
http://www.pushwoosh.com/programming-push-notification/
http://quickblox.com/developers/SimpleSample-messages_users-ios
Please help if you already have experience of implementing custom push notifications.
Thank you!
Topic:
http://www.adobe.com/devnet/digitalpublishingsuite/articles/dps-push-notification.html

I used QuickBlox push notifications. At the moment i'm developing iOS ChattAR based application http://quickblox.com/developers/Chattar. From iOS side, it's quite easy to integrate quickblox push notifications into application. About pricing - http://quickblox.com/pricing/ - my 2.5 year iOS developer expirience tells me that 1 000 000 pushes per month for application (QuickBlox Free plan) - it's very much (common AppStore application produce ~10 000 push notification per day -> 300 000 notifications per month).
DPS application can not use native iOS SDK, but there is REST API - http://quickblox.com/developers/Messages - you can use push notifications through REST API as well. Some month ago i was developing custom Android application & i integrated quickblox push notifications through REST API, it's real.

Who is the favorite third party storage provider?

Who can you recommend as a third party storage provider for my very large I-Photo file?

If the collection of Photos is indeed "very large", then online storage (simply for Backup purposes) is impractical. It takes too long to transfer the files.
If you want to provide ACCESS to the files for others, the features provided by the service outweighs all other considerations.

Problem in configuring third party JMS provider

Hi,
I am having a problem in configuring Sun MQ 4.4 JMS provider with weblogic 10.3.I tried the following method:-
1. Created a new outbound connection pool.
2.In the properties for the connection pool :-
ConnetionFactory Location :- myTestCF (this is the remote connection factory JNDI)
Factory properties :- java.naming.factory.initial=com.sun.jndi.fscontext.RefFSContextFactory;java.naming.provider.url=file:/C:/my_object_store;java.naming.security.principal=admin;java.naming.security.credentials=admin
3.Provided the username and password also.
But when I am testing it from a SOA composite through a JMS adapter, it is giving me an exception indicating it could not locate the connection factory.I am clueless why this is happening.I've also tried with putting the sun mq jar files inside the <%wl_home%>/user_projects/domains/<%my_domain%>/lib folder.But it did not work.Please help.
Thanks,
Rahul

In third party process SO / PR / PO should be in integrity. Your manual modification violates this I think (you are making one PO item from two SO item...).
http://help.sap.com/erp2005_ehp_04/helpdata/EN/dd/560287545a11d1a7020000e829fd11/frameset.htm
Processing Third-Party Orders in Purchasing
When you save a sales order that contains one or more third-party items, the system automatically creates a purchase requisition in Purchasing. Each third-party item in a sales order automatically generates a corresponding purchase requisition item. During creation of the requisition, the system automatically determines a vendor for each requisition item. If a sales order item has more than one schedule line, the system creates a purchase requisition item for each schedule line.
Purchase orders are created from purchase requisitions in the usual way. For more information about creating purchase orders, see the Purchasing documentation. During creation of the purchase order, the system automatically copies the delivery address of your customer from the corresponding sales order. In a sales order, you can enter purchase order texts for each third-party item. When you create the corresponding purchase order, the texts are automatically copied into the purchase order. The number of the purchase order appears in the document flow information of the sales order.
All changes made in the purchase order are automatically made in the sales order as well. For example, if the vendor confirms quantities and delivery dates different from those you request and enters them in the purchase order, the revised data is automatically copied into the sales order.
Regards,
Csaba

Third party logistics provider

hi ,
Has any one worked on third party logistics ?
Can any one explain what are 'Interfaces u2013 figuring about 10 on 3rd party logistics provider side and 21 on the customer side' .
Are they like interface to send some data from some other system to saP ?
In that case any one explain what is 10 on third party system? and 21 on our side ?
Regards,
KB
Edited by: kamala bhavani on Feb 18, 2010 10:44 PM

Hi,
Will you explain your requirement in detail???
Kapil

Third Party Service Provider

Does AM 6.3 acting as the Identity Provider, support any third party software that could potentially be installed on the service provider side and that can communicate with AM using SAML? Please let us know if anyone has successfully implemented using any such software.
Thanks

Thanks for getting back to me Bernhard.
1. All that I knew about Liberty ID-FF and SAML 1.1 is that they are two different protocols for now and they merge into one as SAML 2.0. I didn't know that Liberty ID-FF uses SAML 1.1 as a transport vehicle ( first of all I will need to read into seeing what this means from saying using plain SAML 1.1 ).
2. We just heard about source-id and we are looking into this. The main criteria for us for now to choose one over the other is dependent on the following factors:
a) Which is easier and quicker to develop and deploy( AM or sourceid) on the Service Provider side assuming we have very little knowledge of SAML..
b) If we end up choosing sourceid on the Service Provider side will it be compatible with AM on the IP side?
Thanks

Using Weblogic MDB to consume message using a XA transaction with third party JMS Provider

          I understood from the WebLogic documentation that we can invoke a third party JMS
          using its XA interface from within a MDB where transaction-type is Container and
          trans-attribute is Required. Also we will need to specify its XAConnection factory
          name as connection-factory-jndi name. It that sufficient ?? Or do i need to set
          up some other attributes also ??.


          Hi Neeru,
          I understand u were able to solve this issue.
          I am using similar kind of configuration but instead of tibco i am using Webmethods.
          Could u please let me know what did u do to solve the problem?
          -thanks and regards.
          Praveen
          "Neeru Munjal" <[email protected]> wrote:
          >
          >Hi Rob,
          >I used the same whitepaper and tried to use TIBCO JMS with Weblogic server),
          >I
          >started with MDB example specified in Weblogic 7.0 release in examples/ejb20/message
          >and modified it to use trans-attribute as Required. Also I used connection
          >factory
          >which supports XA, but my MDB does not get called.
          >
          >Thanks & Regards
          >Neeru
          >
          >Rob Woollen <[email protected]> wrote:
          >>Here's a white paper about integrating 3rd party JMS providers with
          >WLS:
          >>
          >>http://dev2dev.bea.com/resourcelibrary/whitepapersdetail.jsp?highlight=whitepapers&filePath=components%2Fdev2dev%2Fresourcelibrary%2Fwhitepapers%2Fwp_jmsproviders.htm
          >>
          >>-- Rob
          >>
          >>Neeru Munjal wrote:
          >>> I understood from the WebLogic documentation that we can invoke a
          >third
          >>party JMS
          >>> using its XA interface from within a MDB where transaction-type is
          >>Container and
          >>> trans-attribute is Required. Also we will need to specify its XAConnection
          >>factory
          >>> name as connection-factory-jndi name. It that sufficient ?? Or do
          >i
          >>need to set
          >>> up some other attributes also ??.
          >>>
          >>
          >

Using Swiftmq as the third-party Jms provider in Weblogic11

Hi, I am using swiftmq as 3rd-party jms provider in wls, however when I am trying to deploy a MDB listening on the queue configed in swiftmq.rar (resource adapter) in wls, it warns that ***MDB is unable to connect to the JMS destination: myforeigndestination.
The Error was:
weblogic.jms.common.InvalidDestinationException: Foreign destination
, so do I need to configure a foreign connection factory and config the mdb to refers to this foreign connection factory? thx

Hi, I am using swiftmq as 3rd-party jms provider in wls, however when I am trying to deploy a MDB listening on the queue configed in swiftmq.rar (resource adapter) in wls, it warns that ***MDB is unable to connect to the JMS destination: myforeigndestination.
The Error was:
weblogic.jms.common.InvalidDestinationException: Foreign destination
, so do I need to configure a foreign connection factory and config the mdb to refers to this foreign connection factory? thx

Publishing an Adobe Muse site to a third party hosting provider?

Hi Guys,
I'm trying to find instructions as to how to go about publishing my completed Adobe Muse site which is hosted with a third party hosting company, there are videos for publishing to business catalyst alright.
Any help would be greatly appreciated...
Thanks
Have a nice Saturday :-)

I am having a problem trying to FTP my site created in Muse, too. I am using "Upload to FTP host" (Found under File) and after several tries I am still getting a different error message each time: "Error uploading (a certain file which happens to be a jpg this time!). Click Resume to try again. If this problem persists, try again later.
[426 Failure reading network stream.]."
I tried again and again and again. So I called the host company and I checked to see if am using all the correct settings that they have.They verified that I had the proper settings.
Still no success.

Urgent..................External third party security provider

Hello!
I am trying to deploy a web module in home OC4j on Oracle application server v.10.3.1.0 using Windows 2003 Active Directory.
Knowing that in active directory I have a group whose DN is :CN=Administrators,CN=Builtin,DC=SWSERVER,DC=DGET,DC=COM
and a user whose DN is CN=Administrator,CN=Users,DC=SWSERVER,DC=DGET,DC=COM
the giving user is a member of the Group Administrators .
In Security provider page, I add users and groups settings
LDAP Group Name Attribute: cn
LDAP Group Object Class: group
LDAP Group Member Attribute:member
LDAP User Name Attribute:name
LDAP User Object Class :user
I also map roles between Web application and Security provider.
When I browse to the application in IE, I am prompted to enter user name and password. I entered Administrator password but not authenticated!!!!!!
What should i put in security provider page????????? what should be the settings?????????????
N.B: winodws people are encouraged to reply!!!!
thank you in advance!!!

several things could have gone wrong. Can you increase the logging level. Set it to TRACE:32 instead of NOTIFICATION:1 to see what is going on with your authentication.
../j2ee/home/config/jps-config.xml:
<logger name='oracle.j2ee.security' level='TRACE:32'
useParentHandlers='false'>
<handler name='oc4j-handler'/>
</logger>
After restarting OC4J, you would monitor log.xml in your j2ee/home/log/oc4j directory to analyze what is going on.

Sip trunk between CUCM7.0 and third party VOIP provider

Hi all,
I'm looking for a solution/howto configuration for setting up a SIP trunk between CUCM7.0 and a SIP-VoIP provider.
Got SIP username, password and SIP-proxy IP from the provider.
I've done such a setup on CUCME a couple of times, but never on the CUCM.
Who can put me on right way?
Can it be done on the CUCM, or must an IOS-Device be used (got a PSTN-GW connected through H323 with CUCM)?
THanks for the hint,
Greets Norbert

Here we go.....
CONFIG (Version=7.1)
=====================
Version 7.1
Cisco Unified Communications Manager Express
! Calling nr. incoming
voice translation-rule 40
rule 1 /\(.*\)/ /0\1/
! Discard prefix (calling nr.)
voice translation-rule 190
rule 1 /^0\(.*\)/ /\1/
rule 2 /^9\(.*\)/ /\1/
! Mapping, internat to external nr.
voice translation-rule 191
rule 10 /^[1-9].*/ /xxxxEXTERNALxxxx/
! for call-forwarding
rule 15 /^0\(.*\)/ /\1/
! Mapping external to internal nr.
voice translation-rule 192
rule 2 /^xxxxxEXTERNALxxxx/ /4xx/
voice translation-profile TP_IN_SIP
translate calling 40
translate called 192
voice translation-profile TP_OUT_SIP
translate calling 191
translate called 190
dial-peer voice 2001 voip
corlist outgoing dialCORnoFax
description *** SIP-TRUNK (OUT) ***
translation-profile incoming TP_IN_SIP
translation-profile outgoing TP_OUT_SIP
max-conn 2
destination-pattern 9.T
session protocol sipv2
session target ipv4:2xx.xxx.xxx.xxx
session transport udp
! customer external nr. range (one dot at the and -> 0-9)
incoming called-number xxxxxxxx.
dtmf-relay rtp-nte
codec g711alaw
no vad
gateway
timer receive-rtp 1200
sip-ua
keepalive target ipv4:2xx.xxx.xxx.xxx
authentication username xxEXTERNAL NR.xxxxx password 7 111111111111111111111
calling-info pstn-to-sip from number set xxEXTERNAL NR.xxxxx
retry invite 2
retry response 2
retry bye 2
retry register 2
retry options 1
registrar ipv4:2xx.xxx.xxx.xxx expires 60
host-registrar
Greets,
Norbert
Hope this help......Please rate if helpful

11g Forms and SSO Third-party / custom identity provider

For 11g Forms, we currently use database accounts to authenticate users.
With a custom written identity provider, I was wondering if anyone knew the high-level of how a user could be SSO authenticated with a Forms session.
Here are some questions:
Do you need other Oracle products (OAM or OID) to use Weblogic / Forms SSO authentication with a third-party identity provider?
If you continue to use unique database accounts, don’t you need OID to bridge the link between an SSO account and an oracle database user account?
If you don’t use unique database accounts (i.e. only use schema name for all users), what products are need to allow Webgate / Forms to use a third-party identity provider to launch a forms database session? i.e would the SSO name be passed to the database layer for user auditing.
I would appreciate if anyone had concepts of what products/techniques are needed.

For 11g Forms, we currently use database accounts to authenticate users.
With a custom written identity provider, I was wondering if anyone knew the high-level of how a user could be SSO authenticated with a Forms session.
Here are some questions:
Do you need other Oracle products (OAM or OID) to use Weblogic / Forms SSO authentication with a third-party identity provider?
If you continue to use unique database accounts, don’t you need OID to bridge the link between an SSO account and an oracle database user account?
If you don’t use unique database accounts (i.e. only use schema name for all users), what products are need to allow Webgate / Forms to use a third-party identity provider to launch a forms database session? i.e would the SSO name be passed to the database layer for user auditing.
I would appreciate if anyone had concepts of what products/techniques are needed.

Integrating As a Third-Party Provider

I work for a third-party application provider that is considering the feasibility of integrating with Oracle Portal. Does registration as a third-party provider require the transference (delivery) of all of only our meta-data our all of our content onto Oracle's servers? Is there any way we can be integrated as a third-party application into Oracle Portal, but still be able to host our content? Thanks for any information you can provide. This is an urgent request. Thanks!
Jack

Thanks for your interest! To answer your first question: No, transferring metadata or data to Oracle servers certainly isn't typical, nor is it at all a requirement in order to become a third-party provider! You can certainly host your content directly from your firm..
Is your company planning to provide portlets to the community of Oracle9iAS Portal customers? If so, then feel free to learn more about how your firm can join The Oracle Portal Partners Initiative.
On the other hand, if you are just thinking of hosting content for your own intranet for display thru your own installation of Oracle9iAS Portal, you won't need to have any of Oracle's own servers involved at all! To test things out, we do, however have a site available called portalstudio.oracle.com, which allows customers to test and present how one might integrate web content into an Oracle 9iAS Portal installation.

Third party IS provider

Similar Messages

Maybe you are looking for