Third party sale-how to GI GR simultaneously in outbound delivery

VA01 - Item cat:TAS/ sch.line cat- CS- with which automatic PR will be created,
schedule line- bussiness data :item category =blank , acct assgt cat. =M .movement type =601 .
item category; special stock = E.
ME21N wrt: PR generated in step-1
vl01n - assignment of Purchase order in outbound delivery
vl02n - carry out at the same time a goods issue (referred to the delivery) and a goods receipt (referred to the PO).
MIRO - verifying vendor invoice.
VF01- wrt: sales order created in step-1
in this case, my process is not like the stander third party sale.
How to config the sap to GI and GR simultaneously in the the t-code "vl02n"?
and GI and GR is all related to the "E" stock?
thanks a lot.
Edited by: cai_yu on Mar 21, 2010 12:38 PM

Hi,
In third party sales there is no outbound delivery take place, our vendor ships material to our customer,
Process :
Create sales order >> PR >> P.O >> Invoice reciepts >> Invoice to customer
Still if you want to carry our that goods you recieved & want to perform outbound delivery then you can still able to configure it, but simplest way is just Determine item category TAB instead of tas in sales order
Process
Sales order >> PR >> PO >> Goods reciepts - MIGO >> Invoice reciepts - MIRO >> Outbound delivery >> Invoice to customer.
Kapil

Similar Messages

Third party sales how customer address copied to Purchase Requisition

Dear All,
Third party sales customer address copied to Purchase Requisition, How this is happening and Where is the confirugation setting, Is it MM or SD related.
Regards
Sudarshan

Hi,
configuring thrid partyIt is related to MM, but its significance is there in SD as well.
The address of the customer is copied from the coustomer master data, through sales ordeer.
reagrds.
DSR
Edited by: D.Srinivasa Rao on Nov 7, 2011 1:48 PM

Third Party Sales Order - Complete Upon Partial Invoicing

We have a third party sales order that creates a purchase order (No delivery is used). If there are 2 lines items and we completely invoice one of the line items and partially invoice the other, the sales order is showing in a complete status.
We are using an item category of: TAS
Billing Type: F2
Note: Completion rule on TAS is blank.
Does anyone have an idea of why the order would be going to a complete status when it is not fully invoiced?
Thanks,
Mark

Shiva,
Perfect answer. Thanks !
Mark

In third party sales order process how business come to know that the vend

Hi SD Gurus,
In third party sales order process how business come to know that the vendor has delivery the goods to the customer?
Where Business will check whether Vendor has delivered the goods or not to the customer?
Thanks & Regards,
Nivas

Hi,
Process
VA01 - Create sales order (Schedule line CS and item category TAS) >> ME52N - PR is generated after save of sales order >> ME21N - Convert PR in to P.O >> Then vendor will send goods to customer and will send invoice to our company >> MIRO - Invoice receipt from vendor >> VF01 - Final invoice to customer
When you enter vendor invoice then you come to know that vendor sent qty. same will be billed to customer(Billing relevance in item category should be F)
Kapil

How to raise customer invoice in case of third party sale from PS

Dear All,
In case of third party sale from project systems module, PR is raised which is further converted to PO and once the material reaches at client place GRN is done.Based upon the GRN the actual cost is booked to the project.How should I raise the customer invoice against the materials received by the customer?
I went through the Forum and based upon the threads there, I came to know that one option is to create sales order for the same items and do order based billings.But for this I have to enter the same materials items again in the Sales order which is nothing but duplicacy of data.
Is there any alternative to this? Or some other way by which the PO line items be copied to sales order so that I can save time while creating sales order.
Regards,
B P Singh

Hi Virendra,
Business scenario is like this.
I have created project and activities.Have assigned materials as 3rd party sale in NWA. I have released the project.PR are getting followed by PO.On doing the GR the actual costs are getting booked on NWA.
My concern is how to bill the Items(the same material components) which are assigned to activity.
As per your input I need to do Resource Related billing.Thanks for the input.It is no longer required to assign materials in DIP to Carry out RRB.
To carry out RRB do I need to create Sales Order first ? If No then how to do RRB? If Yes I need to create a Sales Order with all the material components which I have assigned at activity level. So I was looking for some alternative so that SO creation becomes less tedious.
Regards,
B P Singh

In Third Party sales order processing how we come to know that the customer

Hi SAP SD Gurus,
In Third Party sales order processing how we come to know that the customer is recived the Goods from the vendor?
Thanks & Regards,
Sreenivas.P

From a high level view, the behavior should work like this:
- Sales order placed from customer PO via Tcode VA01. Purchase Requisition created upon saving the order
- Purchase order created with reference to Purchase Requisition via Tcode ME21N
- Receive confirmation from vendor that goods have shipped via EDI
- Create invoice receipt to vendor via Tcode MIRO
- Create billing document to bill customer via VF01

How to configure purchase requistion in third party sale pls send me detail

dear expert
how to configure purchase requistion in third party sale pls send me details. waiting your valuable reply
vicky

you can find the details in the below links
Re: THird party sales complete scenario
http://wiki.sdn.sap.com/wiki/display/ERPLO/PROCEDURETOCREATETHIRDPARTY+SALES
http://www.sap-img.com/sap-sd/process-flow-for-3rd-party-sales.htm
Regards

How automatic po generated in third party sales

In third party sales an automatic puchase order is generated along with the purchase requisition....kindly help how can i get the automatic po generated
Regards
Anindya Das Gupta

Hi,
A new PO is created for a 3rd-party sales order item when indicator Create purchase order automatically (V_TVAP-ALEKZ) is set for schedule line category and the Event PUR_ORDER_CHANGE_VIA_SD_EVENT is activated (SWFDVEVTY1-ENABLED field is marked). Please see information in note 332475 for more information.
Kind Regards,
Suneet

How Billing doc.created from purchase invoice in Third Party Sale

Hi All
Our client requirement has been mapped as sap third party sales process .
But if the vendor is delivering less qty . than the qty. for which Sales ordered has been created, How to create the Sales billing Doc. according to the purchase invoice so that Sales Billing Doc. should be created for the delivered qty. only .
Please suggest the configuration & how the data is flowing from the Purchase Invoice to the Sales Invoice.
Thanks in advance
Ashok

Hi
you can achieve your requirement by following
T-Code VTFA (copy control Order to Billing)
use you Third party order type and billing type
Go to Item category (if Standard use TAS)
there is a option "BILLING QUANTITY"
user there "E" Goods receipt quantity less invoiced quantity"
Hope it will solve your problem
Cheers
Shambhu Sarkar

How to configure a new third party sales document type?

Hi SAP SD gurus,
I am new to the SAP world, I need your help in configuring a new third party sales document type for a site.
There are existing third party document types being used in the region, but the client wants an entirely new third party document type that is activated for CREDIT MANAGEMENT.
I just need your inputs, as how to go about it. If I copy from an existing third party sales doc. What additional steps do I need to follow? Like Item category config, copy control settings, and credit management.
Is there a need to create new billing types?
Also as per process, by creating a new document type, how will it affect the logistic processes, if any?
Thanks a lot in advance for your valuable inputs.

Hello,
You can create new document type under following customization path
SPRO>>Sales and Distribution>>Sales>>Sales Documents>>Define Sales Document Types
Now create new document type by copying the standard document type OR
Now go to
SPRO>>Sales and Distribution>>Sales>>Sales Documents>>Sales Document Item>>Define Item Categories
which is already defined for third party sales (TAS)
Now assign this iteme category to your new document type
SPRO>>Sales and Distribution>>Sales>>Sales Documents>>Sales Document Item>>Assign Item Categories
Assignment needs to be done in combination of sales document type and item category group (BANS)
Now
SPRO>>Sales and Distribution>>Sales>>Sales Documents>>Schedule Lines
Assignment of schedule line is already done as you are using the standard one.
Lastly, you may need to maintain copy control for your newly created sales document type for this go to
SPRO>>Sales and Distribution>>Sales>>Maintain Copy Control for Sales Documents
(Copying Control: Sales Document to Sales Document)
Here you can define copy control requirements.
BR,
Tushar

How will i configure third party sales order

pls tell me how will i configure for third party sales order

dear,
prasanta,
the configuration of third party sales order is given below
Process Flow for 3rd Party Sales
Customize the third party sales in summary:
1. Create Vendor XK01
2. Create Material Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing *-- Seema Dhar
SD - 3rd party sales order Create Sales Order
VA01
Order Type
Sales org, distr chnl, div
Enter
Sold to
PO #
Material
Quantity
Enter
Save
SD - 3rd party sales order View the PR that is created with a third party sales order
VA01
Order Number
Goto Item Overview
Item ->Schedule Item
SD - 3rd party sales order View the PR that is created
ME52N
Key in the PR number
Save
SD - 3rd party sales order Assign the PR to the vendor and create PO
ME57
Key in the PR number
Toggle the "Assigned Purchase Requisition"
Execute
Check the box next to the material
Assign Automatically button
Click on "Assignments" button
Click on "Process assignment"
The "Process Assignment Create PO" box , enter
Drag the PR and drop in the shopping basket
Save
SD - 3rd party sales order Receive Goods
MIGO_GR
PO Number
DN Number
Batch tab , click on classification
Serial Numbers tab
Date of Production
Flag Item OK
Check, just in case
Post
Save
SD - 3rd party sales order Create Invoice
MIRO
Invoice Date
Look for the PO , state the vendor and the Material
Check the box
Clilck on "Copy"
Purchase Order Number (bottom half of the screen)
Amount
State the baseline date
Simulate & Post
Invoice Number
*Invoice blocked due to date variance
SD - 3rd party sales order Create a delivery order
VL01N
In the order screen , go to the menu Sales Document , select "Deliver"
Go to "picking" tab
State the qty and save
SD - 3rd party sales order Create a billing document
VF01
Ensure that the delivery document is correct in the
Enter
Go to edit -> Log
Save
in third-party order processing, your company does not deliver the items requested by a customer. Instead, you pass the order along to a third-party vendor who then ships the goods directly to the customer and bills you. A sales order may consist partly or wholly of third-party items. Occasionally, you may need to let a vendor deliver items you would normally deliver yourself.
Process Flow
the processing of third-party orders is controlled via material types. Material types define whether a material is produced only internally can be ordered only from third-party vendors, or whether both are possible. For example, a material that is defined as a trading good can only be ordered from a third-party vendor. However, if you manufacture your own finished products, you may also want, from time to time, to be able to order the same type of product from other vendors.
Processing Third-Party Orders in Sales
Third-party items can be created automatically by the system, depending on how your system is set. However, you can also change a standard item to a third-party item during sales processing manually.
Automatic third-party order processing:-
if a material is always delivered from one or more third-party vendors, you can specify in the material master that the material is a third-party item. During subsequent sales order processing, the system automatically determines the appropriate item category for a third-party item: TAS. To specify a material as a third-party item, enter BANS in the Item category group field in the Sales 2 screen of the material master record.
Manual third-party order processing
In the case of a material that you normally deliver yourself but occasionally need to order from a third-party vendor, you can overwrite the item category during sales order processing. For a material that you normally deliver yourself, you specify the item category group NORM in the material master.
If, as an exception, you use a third-party material, change the entry TAN to TAS in the ItCa field when processing the sales document. The item is then processed as third-party item.
If address data for the ship-to party is changed in the sales order in third-party business transactions, the changed data will automatically be passed on to purchase requisition and also to the purchase order ,if one already exists. In the purchase order, you can display the address data for the ship-to party in the attributes for the item.
You can only change the address data for the ship-to party in the sales order for third-party business transactions, and not in the purchase order.
Processing Third-Party Orders in Purchasing
when you save a sales order that contains one or more third-party items, the system automatically creates a purchase requisition in Purchasing. Each third-party item in a sales order automatically generates a corresponding purchase requisition item. During creation of the requisition, the system automatically determines a vendor for each requisition item. If a sales order item has more than one schedule line, the system creates a purchase requisition item for each schedule line.
Purchase orders are created from purchase requisitions in the usual way. For more information about creating purchase orders, see the Purchasing documentation. During creation of the purchase order, the system automatically copies the delivery address of your customer from the corresponding sales order. In a sales order, you can enter purchase order texts for each third-party item. When you create the corresponding purchase order, the texts are automatically copied into the purchase order. The number of the purchase order appears in the document flow information of the sales order.
All changes made in the purchase order are automatically made in the sales order as well. For example, if the vendor confirms quantities and delivery dates different from those you request and enters them in the purchase order, the revised data is automatically copied into the sales order
you process third-party items by creating a normal sales order. In overview for the order, you can then overwrite the default item category (TAN in the standard system) with the special item category for third-party items: TAS
Billing Third-Party Orders
If relevance for billing indicator for the item category has been set to B (relevant for order-related billing on the basis of the order quantity) in Customizing, the system includes the order in the billing due list immediately. If, however, the indicator has been set to F (relevant to order-related billing on the basis of the invoice quantity), the system does not include the order in the billing due list until an invoice from the vendor has been received and processed by the purchasing department. In the standard system, item category TAS (third-party order processing) has been given billing-relevance indicator F.
In the first case, the third-party order is considered to be completely billed only when the invoiced quantity equals the order quantity of the sales order item. In the second case, each time a vendor invoice is received, a customer invoice is created for the quantity in the vendor invoice and the order is considered to be fully invoiced until the next vendor invoice is received.
If you have activated billing-relevance indicator F for item categories in Customizing, billing can refer to the goods receipt quantity instead of the incoming invoice quantity.
You can control whether the invoice receipt quantity or the quantity of goods received is relevant for billing in Customizing for copying control for billing at item level.
FOR YOUR PROCESS Individual Purchase Orders WELL GIVE THE RIGHT SOLUTION
Individual purchase orders are used when your customer orders goods from you that are not in stock and must be ordered from one or more external vendors.
Process Flow
During sales order entry, the system automatically creates a purchase requisition item. The purchasing department creates a purchase order based on the requisition and the vendor ships the goods directly to you (unlike third party order processing, where the vendor ships directly to your customer). You then ship the goods to your customer. While the goods are part of your inventory, you manage them as part of the sales order stock. Sales order stock consists of stock that is assigned to specific sales orders and cannot be used for other purposes.
Process Flow for 3rd Party Sales
Customize the third party sales in summary:
Prerequisites for 3rd party sales,
Purchasing org,
purchasing group,
assign the Purchase org to company code
assign Purchase org to plant,
should not maintain the stock in material, it should be trading goods,
1. Create Vendor XK01
2. Create Material Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing *--
i think it will fulfill your requirement if so plz reward point.
ambarish

How can we get purchase req. no in third party sales order

Hi,
I am creating third party order scenario, where i can get purchase req. no in third party sales order.
Regards,
M B Raju

HI
Once you save the Sale order then go to VA02
Double click on the Line item , click on the schedule line tab
under Schedule line tab you can see the Purchase Req. number
Regards,
Prasanna

How Third-party sales issue PO without PR?

Dear Master,
I am doing with CS schedule line for third-party sale, my client doesn't want to generate PR, they want to generate PO directly. Is there anyway to do it? Could you pls help me on that! Thks a lot in advance!
Best regards,

Hi
As per my knowledge it is not possible through standard ,i will suggest work around solution for the above issue
1. Kindly maintain the tick mark Automatic P.O in the purchasing view of the material master record through t code - MM02
2. Then Run the t code ME57 to assign the purchase requistion automaticallt prior to this maintain the source list and schedule the program in the back ground with selection parameters .
By doing the above sales order created purchasing requisition will be generated in turn P.O will be created automatically
THis is the overview solution what i can suggest.
Regards
Damu

How to know Delivery Note no. for Third Party sales

Hello Experts,
I am configuring Third party sales process.and got the suffcient help from old posts.But i got stuck in MIGO step.While doing MIGO we have to enter PO and Delivery Note No so where to find delivery note no.?
Another confusion is, In some of the posts in community,for third party sales configuratuion MIGO is one of the step while in other similar posts there is no MIGO step instead they have shown direct MIRO after PO creation so which i should follow ?
Thanks in advance
Regards,
Vikal

Do you really just follow what others have posted and do not double check with the SAP documentation and even more important with your business needs and some logical thoughts?
In all our >750 plants is a guy who receives the material that is coming in, he compares the paperwork with the goods and then enters the receipt in SAP.
This is the normal and logical process of a receipt in your warehouse.
And now compare this with a 3rd party sales, where the goods are shipped from your vendor directly to your customer.
The warehouse guy does not get any papers from a truck driver, he can't count any goods before he could do something in SAP, he does not even know about this order. And exact this situation is the basis for the standard design: no goods receipt, just invoice.
And any deviation is made because of some special requirements (legal and country specific, or just because of an almighty finance department which can't understand that some of their requirements do not make much sense in logistics. e.g. mandatory 3way matches PO - GR - IR which is not worth the name if you force warehouse people to make theoretical receipts which physically never happened and cannot be verified.

How to create third-party sales and delivery

please provide tcode of third-party sales Sales and delivery

Hi,
There is no Tcode for Third Party Sales.
You need to configure the scenario for the same. Following link will help you to do the necessary configuration settings.
http://help.sap.com/bp_bblibrary/600/html/J54_EN_DE.htm
I hope this will be helpful to you.
Regards,
Shailendra

Third party sale-how to GI GR simultaneously in outbound delivery

Similar Messages

Maybe you are looking for