"This disc does not allow more burns" message - iPhoto bug

A strange behavior in iPhoto 6 :
Easy to reproduce, it happens all the time (on my machine at least).
* Select a couple of pictures (+/- 150 MB)
* Go to Share > Burn
* Insert a blank CD
* Burn.
OK, it burns nicely. But ...
* Eject the CD
* Put that CD back in the computer to read the pictures.
* I have the message "This disc does not allow more burns. Insert a Blank CD"
* Then iPhoto ejects the CD.
Workaround ?
* Quit iPhoto
* Insert the CD again
* It reads and works OK.
Anyone the same trouble ?

I just encountered that problem this morning. I quit iPhoto and put the burned disc back in and saw in the finder that the burn worked. I did not try opening iPhoto again.
But ... I did just try to put that disc into another Mac. While the disc loaded in iPhoto, it did not show any thumbnails. I had to manually drag the photo originals from the disc into iPhoto to import them.
Anyone else like to chime in on this?

Similar Messages

  • HT5225 "This disc does not use the GUID Partition Table Scheme...". I keep getting this message when I try to install OSXLion. It has something to do with a repair Apple performed last year. I use a 17" MacBookPro. Any suggestions?

    "This disc does not use the GUID Partition Table Scheme. Use Disc Utility to change the partition scheme". I keep getting this message when I try to install OSX Lion so that I can upgrade my 17" MacBookPro to move to iCloud. My harddrive was replaced last year by Apple because of a fault by the manufacturer and I think this is the cause of the problem. What can I do so that I don't lose my content.

    When you click the partion tab. There is option on the bottom of the window. Click on that there there are these options.

  • HT1277 I am unable to Quit Mail and this then does not allow me to shut down my desktop apple.

    I am unable to Quit Mail and this then does not allow me to shut down my desktop apple.

    Welcome to the Apple Support Communities
    Open  > Force Quit and close Mail

  • Forgot name/password and install disc does not allow me to reset it

    I forgot the Name and Password I set up to log into my imac. It is an older imac, from 2006 and I can't remember which version operating system. I have tried to use the install disc to reset the password, but it does not allow me to do so. Is there a way to reset the name and password without the install disc? For as long as I can remember whenever I would turn on my mac there would be an image that I had chosen and then a field to enter password. Just recently I turned on my mac and the image or avatar was no longer coming up and it asked for Name and Password. I have tried every combination I can think of and nothing works. I have tried to reset using my install disc, but it says that I do not have a password to reset. 

    Before giving up try the following technique to determine the user account names, and reset their passwords if necessary.
    1. Shut down your Mac and turn it back on while holding down the ⌘ and S keys at the same time until your see a black screen with white text. This is known as Single User mode.
    2. You can skip the following step, but it is recommended that you do not because it will check your boot volume for errors and correct what it can:
    At the :/ root# prompt, type fsck -fy and press Return or Enter. It will take a few moments to complete. If you are concerned that nothing is happening just press the Return key until you see the :/ root# prompt again. Once the file system check is complete and the prompt returns, type mount -uw / and press Return / Enter.
    3. Type the following
    launchctl load /System/Library/LaunchDaemons/com.apple.opendirectoryd.plist
    and press Enter. If you get an error message you may ignore it.
    4. Type ls /Users and press Enter. All of the usernames on the computer will be listed, which is helpful if you don’t know or remember what these are. You can skip the next step if you found the user name you recall and know its password.
    5. Type dscl . passwd /Users/username password while replacing username with one of the users displayed in the previous step and replacing Password with the new password of your choice. Press Enter. You may get an error message about a file or directory not being found. You may ignore this.
    6. Type reboot and press Enter.

  • jsp:useBean, oc4j does not allow more than one???

    Hi,
    I have a jsp in which i access a bean class.In the same jsp i have another included jsp in which i use one more bean class.The error i get is: "Tag attempted to define a bean which already exists:2nd bean id". Does oc4j not support more than one bean class?Can anybody suggest where i am going wrong?

    Hi Shilpa,
    Is this a Z module pool or you are talking about the standard.
    If it is Z module pool create a new lock object of type exclusive or look out for standard lock object for purchase order in SE11.
    after generating the custome lock object SAP would generate 2 function modules 1) Enqueue_<lock object name> (Request lock) 2) Dequeue_<lock object name>(Release lock).
    call these lock FM'S in your module pool likely in the PBO call the Enqueue FM and process your transaction and finally by the end of the transaction call the Dequeue FM to release the lock locked.
    I believe you can try with the lock object 'EMEKKOE'
    Hope this helps you.
    Thanks and Regards,
    Ranjith Nambiar

  • Warning ,message: "Security Block - In safe reading mode, this document does not allow connection to (URL). Check Trust Manager to change out of safe reading mode." How do I do this???

    Can't give you any more details except the URL is:
    http://powerretouche.com/Tutorials_pdf/Black-white_plugin_tutorial.pdf

    That is not a Firefox setting, it is a setting in Foxit. See http://techdows.com/2010/06/how-to-enabledisable-safety-reading-mode-in-foxit-reader.html

  • Add_dim  does not allow more than 1 member - Important

    Hi,
    Im performing correctly some data copy to another app.
    The problem is that when I use  add_dim  it is not possible  to input more than 1 member per dim.
    How can i fix this?
    I.e. 
    Conceptos.vap (all this members) -->   account 40000 (destination member)
    Conceptos "toner"  --->  account 50010 (destination member)
    I wanted to simplfy my script  by typing this (to me this is supposed to work, is very simple, also running a script separately works for both Conceptos)
    *select(%conceptos%,"id","conceptos","vap='i'")
    *xdim_memberset conceptos=%conceptos%
    *xdim_memberset moneda=mxn,usd
    *xdim_memberset lob=servicios_out
    *xdim_memberset metrica=importe_p
    *xdim_memberset consumibles=consumibles_dummy
    *xdim_memberset tiempo=%tiempo_set%
    **WHEN conceptos
    **IS %conceptos%,toner*
    WHEN metrica
    *IS importe_p,importe_r
    *REC(FACTOR=1,metrica="dummy_metrica")
    *ENDWHEN
    *ENDWHEN
    *COMMIT
    *DESTINATION_APP= ALLDORA_FINANZAS
    *xdim_memberset moneda=mxn,usd
    *xdim_memberset lob=servicios_out
    *xdim_memberset metrica=dummy_metrica
    //*xdim_memberset oi <> oi_dummy
    *xdim_memberset tiempo=%tiempo_set%
    *skip_dim = conceptos
    *skip_dim = consumibles
    *add_dim ceco=A010ops001
    *add_dim cuenta=40000, 50010  --->  ERROR !!!!
    *add_dim empleado=empleado_dummy
    *WHEN conceptos
    *IS %conceptos%
    *REC(FACTOR=1,cuenta="40000")
    *IS toner
    *REC(FACTOR=1,cuenta="50010")
    *ENDWHEN
    *commit
    If I just type separately the logic for each one WITHIN the same script, the Account destination member taken is the one found at the bottom of the script, i mean, it is not performing the input in the final Account (40000 and 50010), just for one of them.
    However... since i have to do 14 different logics, it is very awkward to execute 14 scripts... in order for this logic to work,
    Thanx
    Velázquez

    Hi Velázquez,
    The *ADD_DIM statement only allows you to assign one new dimension and one new dimension member to your destination application.
    from the documentation:
    *ADD_DIM {dimension name}=[,{dimension name}=,u2026]
    Sorry this is a limitation.
    Instead of skipping and then adding the following:
    skip_dim = consumibles
    *add_dim ceco=A010ops001
    *add_dim cuenta=40000, 50010 ---> ERROR !!!!
    Maybe you could try renaming:
    i.e.
    *RENAME_DIM consumibles=cuenta
    And then add that dim to REC statement:
    *WHEN conceptos
    *IS %conceptos%
    *REC(FACTOR=1,consumibles="40000")
    *IS toner
    *REC(FACTOR=1,consumibles="50010")
    *ENDWHEN
    You may need to play around with your logic and see what works.
    Thanks,
    John

  • HTTP GET Error - PI does not allow more than 200 chars in the dynamic URL

    Hi Everyone,
    Scenario RFC <-> PI <-> HTTP (GET).
    PI 7.1, Service Pack 05.
    HTTP Setup > URL Address
    The response comes back from the target server when stuffing the URL path in the communication channel "Path" field.
    /rest?&xml_request=......................................................
    The requirement is to dynamically create the URL in the mapping program. While doing this the interface error out saying the URL exceeds the character limit of 200.
    Any thoughts on this would be highly appretiated.
    Thanks,
    AJ

    Please check Mark's reply
    http://forums.sdn.sap.com/thread.jspa?threadID=1944129

  • I have an Ipad 2 and are having problems sending out emails in one of my email address. I always get a message reading the email was not sent because the server does not allow relaying. This is an email account POP3. I have no such problem with gmail.

    I have an Ipad 2 and are having problems sending out emails in one of my email address. This is a POP3 email Account? I always get a message reading that the email was not sent because the server does not allow relaying. I have no such problem with gmail. What could be the problem and how do I resolve this. Is it about settings?
    Richard.

    Welcome to the Apple community.
    If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
    The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
    The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
    Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
    Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
    Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

  • My Iphone 4  will not let me send an email or reply to an email.  The message states it has put it in my outbox  and it is rejected by the server because it does not allow relaying???   I can't seem to find an answer to fix this.  Any help?

    My Iphone 4 will not let me send an email or reply to an email.  The message states that it has put my email in my outbox and that my server does not allow for relaying.   Can anyone help with this?    I have read some other answers and nothing has worked   Thanks

    Your email provider has blocked the standard mail port 25 for sending emails and is requiring a different port. This is to avoid mail relays that use mail clients to send spam. You need to find the port that is used by your provider for sending outgoing mail. Then change the settings in your email account on your phone to match the port. You will also have to provide some security credentials for the account.
    You can also try deleting the email account from your iphone, and the adding the email account back as this will many times set the correct port for sending emails.
    You could also do a Google search on the the settings for your device with your email provider. That will provide you with the proper settings.

  • TS4291 I can't send mail from my iPad apps, I just get the error message, 'The recipient- was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.

    I can't send mail from my iPad apps, I just get the error message, 'The recipient… was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    eMail Groups - You can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email  -  https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • When I try to reply to an e-mail, Iget the message that the recipents e-mail address was rejected by the server because it does not allow relaying. How do I fix this?

    When I try to reply to an e-mail, I get the message that the recipents e-mail address was rejected by the server because it does not allow relaying. How do I fix this?

    Try this. Sometimes this is all that you need to do to fix that issue. Check the outgoing mail server setting. Make sure that your username and password are in there.
    Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

  • I try to 4 message keeps coming back recipient was rejected by server because it does not allow relaying what can i do to rectify this

    i try to send e.mail off iphone 4 and message keeps coming back" recipient was rejected by the server because it does not allow relaying"

    This means that you did not enter a valid user ID and/or password for the Outgoing (SMTP) mail server when setting up the account. You must enter information for both the incoming and outgoing mail servers; they are separate settings.

  • I am trying to email from my iphone and the message comes up it is rejected by server, it does not allow relaying. I am receiving emails ok. How do I fix this

    I am trying to email from my iphone and the message comes up it is rejected by server, it does not allow relaying. I am receiving emails ok. How do I fix this

    What's the model number of your Lexmark printer?

  • Every time I try to send an email, I get an error message which says "The recipient was rejected by the server because it does not allow relaying" How can I fix this?

    My email is not working properly, I can receive emails but I cannot send them. Every time I try to send an email an error message appear saying "The recipient was rejected by the server because it does not allow relaying". There used to be no problem with my email it has only come up recently. Also, my Internet works fine. I have tryed restoring my iPad to factory settings but it still doesn't work. Does anyone know how to fix it?

    try to check the email id   of the guy you are trying to send the email to as i had the same problem i had written yahoo.com when it was yahoo.in 

Maybe you are looking for