This is about issues with the approval of product registration.

Hi. 
This is about issues with the approval of product registration. 
In the absence of category for my problem dealing with Office 2007, I had to choose one of the enlightened choice categories. My proglem. Office 2007 is all well installed and functioning satisfactorily, except Picture Manager section. Every time I choose the
display of an image through Microsoft Picture Manager, I asked about registration. Several times I answered yes, and license code, implementation of tracing the proceeds smoothly. The problem is that by next preliminary to display images with Picture Manager
and it does not hsuker that I am registered and authenticated user. 
What to do and what can I check out? 
In advance thank you.

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
As the question is off topic here, I am moving it to the
Where is the Forum... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Similar Messages

  • Through auto update on the OS to 10.6.8, my Konica printer no longer working, anybody knows if this is an issue with the latest OS?

    My Konica Minolta printer BizHub Pro1200 is no longer printing after the update of the latest OS 10.6.8, the print queue is just sitting there with the Paused message, it won't print even when you try to resume the print, keeps getting back into the paused mode. Anybody out there with the same printer model has this problem. I was told by Konica that this is Apple's OS problem.

    The only OSX update that you have available is Snow Leopard (10.6) which you can purchase from the Apple online store and it comes on a disk.  In order to install subsequent OSX's such as Lion, Mt. Lion and Mavericks (which can be downloaded and do not require a disk) it requires that the MBP have 10.6.8 installed.
    That of course assumes that your unidentified MBP qualifies for those operating systems.
    In short, to proceed any further, you will have to accommodate Snow leopard.
    Ciao.
    ashleyanndarcy wrote:
    Also, I am wondering if you have any tips to speed up streaming speeds on videos without installing an update. I can no longer watch Netflix or Hulu due to how slow my computer streams videos now. Besides updating my Mac, is there any way to solve this? What may be causing this issue?
    In regard to the above, please read this article:
    https://discussions.apple.com/docs/DOC-3521
    Message was edited by: OGELTHORPE

  • All this talk about problems with the iphone 4

    But everyone keeps it, complaints is all i see, companys only understand sale's that's why you have not heard any more response from apple, iphone 4 is selling like wildfire, even with it's problems.

    My goes back this Friday, just in time for my HTC Desire to be delivered. Loads of reviews claim the HTC Desire is just as good (some say better than the iPhone 4). Unless you are 100% happy then there is no point in keeping it. A software update is not going to help a hardware problem. My main gripe was with emails, o.k that can be resolved in an update but now I'm too ****** off waiting for an update, which should have come 2 weeks ago

  • Issue with the presence indicator in list/library web part.

    When viewing a user field (Created By, Modified By or a custom People column) through the list web part (either through the default page /Forms/AllItems.aspx or a custom web part page using a list/library) the presence indicator always says presence unknown.
     However if I go to the Site Permissions on the same site, or My Site or a custom page using a modified core search results web part I wrote the presence indicator works fine.  I can't find any errors being reported on the server.  
    Looking at the rendered code the list web part generates:
    <IMG name=imnmark width=12 height=12 title="" class=ms-imnImg id=imn_48683,type=smtp alt="No presence information" src="/_layouts/images/blank.gif" border=0 sip="[email protected]">
    Locations where the presence indicator works the code is:
    <IMG name=imnmark width=12 height=12 title="" class=ms-imnImg id=imn{20140822-1752-098D-8C11-188AD0B8B8B6},type=sip alt=Available src="http://portal.mydomain.com/_layouts/images/imnon.png" border=0 sip="[email protected]" valign="middle">
    It appears that the List web part is not detecting that the users have a sip address and they appear to be rendered using smtp instead.  It's also odd that the list web part is pulling the correct sip address while the one that works is pulling the
    email address, not the sip address stored in the user profile.  I spent considerable time going through the xslt to try and figure how the tag is rendered but I haven't been able to figure it out.
    We are using Cisco Jabber 9.2.3 for IM, I don't know if that should make a difference or not. It's working fine in other parts of SharePoint and in Outlook. Running SharePoint Dec 2011 CU (14.0.6114.5000) with MS Office 2010 SP2 installed on the client. Tested
    in IE 9.0/10/11.
    Any ideas?

    We don't have a Lync server and I don't have the software available.  Are you saying just having Lync installed even though it won't work might help?
    I did some more digging and believe that this is an issue with the XsltListViewWebPart.  If I go to the UserInformationList the web part used to render the list is the ListViewWebPart and the presence indicator works there.  Also our environment
    was migrated from 2007 and there are a number of pages that are using the old ListViewWebPart and the presence indicator works fine in this part.  If edit the page and add the same list library to it, it's added as a XsltListViewWebPart and the presence
    indicator does not work.
    The presence control is not rendered by the xsl files used by the webpart.  I modified the xsl to display the raw xml and the html code for the presence is part of the xml.  I'm guessing this can't be changed and is part of how SharePoint is rendering
    the data for the XsltListViewWebPart.  You can see the Editor and CheckoutUser lines have the html code embedded in the data.
    <Row
    ID="60"
    PermMask="0x7fffffffffffffff"
    HTML_x0020_File_x0020_Type=""
    File_x0020_Type="xlsx"
    HTML_x0020_File_x0020_Type.File_x0020_Type.mapall="icxlsx.png|Microsoft Excel|SharePoint.OpenDocuments"
    HTML_x0020_File_x0020_Type.File_x0020_Type.mapcon="SharePoint.OpenDocuments"
    HTML_x0020_File_x0020_Type.File_x0020_Type.mapico="icxlsx.png"
    serverurl.progid="1http://myparkersdev.domain.com/sites/BPIT/_layouts/xlviewer.aspx?id=/sites/BPIT/Shared%20Documents/Database%20Sizes.xlsx"
    ile_x0020_Type.progid="SharePoint.OpenDocuments.3"
    File_x0020_Type.url="FALSE"
    FSObjType="0"
    FileRef="/sites/BPIT/Shared Documents/Database Sizes.xlsx"
    FileRef.urlencode="%2Fsites%2FBPIT%2FShared%20Documents%2FDatabase%20Sizes%2Exlsx"
    FileRef.urlencodeasurl="/sites/BPIT/Shared%20Documents/Database%20Sizes.xlsx"
    FileLeafRef="Database Sizes.xlsx"
    FileLeafRef.Name="Database Sizes"
    FileLeafRef.Suffix="xlsx"
    CheckoutUser="&lt;span class=&quot;ms-imnSpan&quot;&gt;&lt;a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'&gt;&lt;img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_77,type=smtp'/&gt;&lt;/a&gt;&lt;a onclick=&quot;GoToLink(this);return false;&quot; href=&quot;/sites/BPIT/_layouts/userdisp.aspx?ID=526&quot;&gt;Ian Howe&lt;/a&gt;&lt;/span&gt;"
    CheckoutUser.id="526"
    CheckoutUser.title="Ian Howe"
    CheckoutUser.span="&lt;nobr&gt;&lt;span&gt;&lt;a onclick=&quot;GoToLink(this);return false;&quot; href=&quot;/sites/BPIT/_layouts/userdisp.aspx?ID=526&quot;&gt;Ian Howe&lt;/a&gt;&lt;img border=&quot;0&quot; height=&quot;1&quot; width=&quot;3&quot; src=&quot;/_layouts/images/blank.gif&quot;/&gt;&lt;a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'&gt;&lt;img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_78,type=smtp'/&gt;&lt;/a&gt;&lt;/span&gt;&lt;/nobr&gt;"
    CheckedOutUserId="526"
    IsCheckedoutToLocal="0"
    Created_x0020_Date="0;#2014-08-22 09:47:01"
    Created_x0020_Date.ifnew=""
    ContentTypeId="0x0101000AE0EC76CD0DB743B42D2FE022EAA6DC"
    Modified="8/22/2014 10:51 AM"
    Editor="&lt;span class=&quot;ms-imnSpan&quot;&gt;&lt;a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'&gt;&lt;img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_79,type=smtp'/&gt;&lt;/a&gt;&lt;a onclick=&quot;GoToLink(this);return false;&quot; href=&quot;/sites/BPIT/_layouts/userdisp.aspx?ID=526&quot;&gt;Ian Howe&lt;/a&gt;&lt;/span&gt;"
    Editor.id="526"
    Editor.title="Ian Howe"
    Editor.span="&lt;nobr&gt;&lt;span&gt;&lt;a onclick=&quot;GoToLink(this);return false;&quot; href=&quot;/sites/BPIT/_layouts/userdisp.aspx?ID=526&quot;&gt;Ian Howe&lt;/a&gt;&lt;img border=&quot;0&quot; height=&quot;1&quot; width=&quot;3&quot; src=&quot;/_layouts/images/blank.gif&quot;/&gt;&lt;a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'&gt;&lt;img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_80,type=smtp'/&gt;&lt;/a&gt;&lt;/span&gt;&lt;/nobr&gt;"
    ecb.dispex="return DispEx(this,event,'TRUE','FALSE','FALSE','SharePoint.OpenDocuments.3','0','SharePoint.OpenDocuments','','1http://myparkersdev.domain.com/sites/BPIT/_layouts/xlviewer.aspx?id=/sites/BPIT/Shared%20Documents/Database%20Sizes.xlsx','526','526','1','0','0x7fffffffffffffff','','')" />
    I just find it strange that the old ListViewWebPart works.  Our SP environment has not been patched to the latest version, I'll try that next and see if it makes a difference.

  • Has anyone had issues with the charger mine says i need to use the original charger and it is the original charger

    my charger stopped charging says I need to use the original charger which I am Verizon says Samsung is aware of this and is working on it

    Try using these directions on this link: http://support.apple.com/kb/HT1926 or http://support.apple.com/kb/HT1923
    This resolved my issue with the new update on Vista.
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)

  • Has anyone had issues with the latest i-tunes update 11.1.4 on Windows Vista

    I downloaded the update on 24th Jan, and when I tried to open i-tunes after that it failed to start and the message was MSVCR80.dll and the window suggested that I remove and re-install i-tunes.
    I did this and then my CD/DVD drive was not recognised. I then decided to go for a system restore prior to the update. When I did this i-tunes worked again but a window opens every 30seconds saying 'Mobile device helper is not working'  At one point I had 116 windows open. Has anyone else had this problem or can offer any advice please? I have an i-pod classic and my system is windows vista which is approx 8yrs old. I have never had any problem with i-tunes updates before.

    Try using these directions on this link: http://support.apple.com/kb/HT1926 or http://support.apple.com/kb/HT1923
    This resolved my issue with the new update on Vista.
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)

  • Does anyone have issues with the instrument library?

    I've installed iLife 08 and then added all the jam packs. Now when I open GB the default track is an accordion (not a piano) and when adding loops to the timeline they take on a different instrument sound (e.g. drum loop sounds like raindrops, etc.)
    I've searched high and low for similar problems and have found nothing that resembles this, I've cleared my preferences and repaired permissions and still nothing helps, I've contemplated reinstalling but I have no guarentee that that will help and I'm reluctant to invent the 3 hours it will take to do all that if it is all for nothing...
    Bottom line is...is this really an issue with the instrument library and is there any way for me to fix this without reinstalling?

    Just loaded the 6.0.2 update a few days ago.  I was hoping it would fix the dropping of wifi where the 4g and 3g always kept.  I have restored the router and I have even switched towers through AT&T's help, but to no avail.  I still am dropped and sometimes it spins and spins looking to connect and then says, Cannot connect at this time. Sometimes it connects, and when the phone goes to sleep, it disconnects and then it is heck connecting again.   I am very upset for I do not have unlimited data and my data has soared over 270 mg which I usually always kept way below 200 as  being in my home most of the time.  I am planning to take into AT& T store for a new one, just not happy with the wifi situation.  It is sad that this cannot be fixed with an update.  I saw earlier that some Iphone 5 made in China were the cuprits, and maybe I got one of those.  I hope At&T and Apple are reading these dialogs.  Please let me know if fixes are on the way!

  • We run an iMac 3.4 GHz I7 for our church worship service; we haven't upgraded to Mavericks because we heard about issues with multiple screens crashing.  Has this issue been resolved?  Thank you!

    We run an iMac 3.4 GHz I7 in our church worship service; we have front screens and a stage display monitor ; we haven't upgraded to Mavericks because we heard about issues with multiple screens crashing.  Has this issue been resolved?  Now that we are 2 upgrades behind, I'm getting little concerned.  Thank you!

    Oh, well that was a whole other kettle of fish:
    Oh the G4 I attempted to install iLife '08 before Lepoard was available. About the only thing that installed cleanly was iPhoto. I ended up reinstalling everything back to iLife '06, and then upgrading back to the current stable version of the iLife '06 version. I didn't attempt a reinstall until after I upgraded to Leopard.
    When I did reinstall, I made a iLife '06 folder, copied all iLife apps into it, and upgraded. Seemed to work, except for the part where iMovie gets left behind and iDVD is only mostly functional.
    When I installed on the other 2 machines, it was after installing Leopard and all upgrades. On those 2 machines, I didn't bother with the copy, I just moved everything to the iLife '06 folder I created, and did a fresh install.
    I didn't have to do anything with the iPhoto Libraries, that I can recall.
    I always do an upgrade, never an archive and install. I've never had a problem with this back to 10.1 or 10.2.

  • I cannot get decent reception on my 4s from Sprint.  I understand there is a known WiFi issue with the 4s as well as antenna issues.  Is this true and is it resoved in the 5 series?

    I cannot get decent reception on my 4s from Sprint.  I understand there is a known WiFi issue with the 4s as well as antenna issues.  Is this true and is it resoved in the 5 series?

    I am aware that Sprint has network issues. I have learned that Apple does have reception issues with the 4s.  The 5 series has more antenna area and a different protocol. I have owned at least 6 iPhones personally and over 30 as a company.  The 4s is junk. Apple's attitude toward customer service is much more of a problem than Sprint's network.  Apple sent me your non-answer to my questions instead of anything real. I asked about the iPhone, not about Sprint.

  • I am having trouble connecting to my network all of a sudden. It is not an issue with the service/router. I keep getting kicked off and getting a ! in my airport... anyone know what's up with this?

    I am having trouble connecting to my network all of a sudden. I am able to connect to other networks but not my own. It is not an issue with the service/router because other devices connect fine. I keep getting kicked off and getting a ! in my airport. Last time it happended I called apple and the suggested I wipe my HD and reinstall everything. I did and it did not work. One day I turned my laptop on and it connected no problem. Now it has kicked me off again. I tried resetting my IP address but that does not work either! Has anyone had this problem?

    Try this:
    Apple menu / System Preferences / Network.
    Click Location: and select Edit Locations..
    Click + (plus sign), and enter a name for the new location - anything will do.
    Apply this.

  • I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?

    I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?

    What is the make & model of your home Wi-Fi router that you are attempting to connect your G5 iMac to? Which exact model of iMac do you have?
    What wireless security type is your router using: WEP, WPA, or WPA2? If you temporarily disable wireless security, can the iMac connect to it now?

  • Computer won't start up after recent version of mountain lion.  My power Mac was running extmely slow this morning, so i shut down to restart.  As it is starting the screen goes black, says something about debugging with the word panic in parentheses. was

    I upgraded to latest version of mountain lion yesterday, this morning my power Mac was running extremely slowly (while typing, had to wait a second or two for words to appear), I shut down to see if problem would clear up.  When starting up, screen went black with programming jargon, something about debugging with the word panic in parentheses.  Screen then goes back to gray, says Mac encountered a problem and has to restart once I push a key.  Apple logo comes on gray screen, icon keeps circling and nothing happens.  This has happened three times in a row after shutting down and trying to restart.  Any thoughts?

    When verifying disk, said could not repair disk, back up as many files as possible then re format disk.  Computer now doing Internet recovery. Should I. Do the following in this order
    1 restore from back up on time machine
    2 re install osx
    These are the options coming up on osx utilities window

  • I am still having issues with the TOC. I finally got several chapters and sections to show different pictures in the TOC, but have spent hours trying to figure out how to repeat it. This should be so simple. Is there an update? Please help us Apple.

    I am still having issues with the TOC pictures. I got several chapter/section photos to show up, but can't seem to repeat this success. It is some mystery that happened during a time that I had practically given up. This should be such a simple thing. Drag and place a picture into the placeholder and it shows up in the TOC....right? Help, help help! want to get this thing done and it's taken two days of work just get some of the photos to show up. I am going to have to publish this ibook with no photos in several sections.....why can't this be simple? I have even had someone else spend hours trying to figure this out. This software is such a GREAT idea....come on...help with this little part of it.

    I had the same problem myself. I got to the point where I couldn't replace the photo, of a new chapter, in the TOC. What I did was to duplicate an existing chapter that was working and was able to replace it's TOC's photo. I also found that if you try different areas of the photo you can sometimes get it to replace correctly. For example, instead of dragging the new photo to the middle of an existing photo, try dragging it to the right top corner.

  • Why does FF save files to desktop, when I have "downloads" checked in options? This is a new issue with the latest version 3.6.3 Windows XP Thanks.

    Why does FF save files to desktop, when I have "downloads" checked in options? This is a new issue with the latest version 3.6.3 . Using Windows XP Driving me nuttier! Thanks.
    (Is is that MicroNetFrame Asst thing?)
    == This happened ==
    Every time Firefox opened
    == When I installed latest version

    Thanks for your reply. I appreciate your help.
    It was just a hunch that MircoNetFrame was causing the problem. I disabled it as you suggested, and I still have the problem.
    I just changed under Tools>Options> General - had checked "ask me every time" under downloads, so instead of asking me, FF saved the download to I know not where. It no longer saves it to the desktop, leaving a duplicate in "my documents".
    In windows, I have found unless one knows the entire name of the document, one can never find anything. It isn't listed under recent ''''''__. I can't recall the nomenclature, but the
    capability is ridiculous. So, I don't know where that file I just downloaded is!
    I downloaded a PDF file, but this happens with all DL's. It was so easy to have them all stacked in one place and I could recall
    what I had and when I downloaded it easily.
    Do you have any other suggestions other that going back to the old version of FF, which I would rather not do?
    Thanks again for your time, it is very considerate to help a complete stranger, I must say. Sounds like something I might do! Cheers!

  • HT204053 The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert ano

    sir have this error so what can i do The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.

    It looks like the iPhone is locked to a carrier that is not the one you are trying to use.
    You need to determine which carrier it is locked to and then contact them to see if they are willing to authorise the unlocking of your iPhone.  As ManSinha mentioned, many carriers will only authorised the unlock if requested by the customer who had the contract with them for this iPhone.
    Remember that only the carrier who owns the lock on your Iphone can authorise Apple to unlock the iPhone in their servers.  You need to contact the carrier or have the previous owner of the iPhone request the unlocking.

Maybe you are looking for

  • Security-Kerberos Event ID 9 - Smart Card not working for Login due to CRL download failure

    We have 8 computers that users were able to login with a Smart Card on one day. The next day they couldn't. Everyone else can login with a Smart Card without issue. These users can login with their smart card on other systems without issue. No users

  • Open a new tab in ios7?

    How do I open a new tab in ios7 without going via favourites or home page? There isn't a +sign on right of tab toolbar as previously.

  • Probem attaching OWSM Policy to OSB Proxy Service

    Hi all, I am working with OSB 11g R1 and I am trying secure one proxy service by attaching one OWSM predefined policy. However, the "OWSM Policy Binding" is disabled in the Policy section of the proxy service. I found this thread in the forum [1] wic

  • Wily Introscope Manager

    Guys, I have some questions about Wily Introscope Manager. What is the difference between Wily Introscope Manager Workstation and WebView? I noticed that some data are not collected from Wily Agents, for instance: CPU, Servlets and so on..How can I s

  • Album Info Application or Script?

    A few months ago I messed up royally by erasing all the track numbers on my entire library, but just the track numbers. This of course put all the tracks out of order in their respective albums. Does anyone know of an application or a script that wou