This screen comes up when I'm editing my vista web site it says th3gallery requires jquery v1.2.2 or later you are using v1.4.1 my vista web site loads fine on Explorer browser, it has studdenly started to do this ? what do I need to do?

works ok on window explorer but not Fireox, it has been fine for months just started showing this recently

Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)

Similar Messages

SWF Files do not work in Firefox. My sites work fine in Explore & Safari? Why is this? I have updated all my plugins, reinstalled yet still nothing?

SWF Files do not work in Firefox. My sites work fine in Explore & Safari? Why is this? I have updated all my plugins, reinstalled yet still nothing?

Can you post a link?
Does that only happen on that website or do you have that problem with all Flash content?
Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

When I try to open the EOS digital solution disk ver 24.1 for my new Canon Rebel T3i camera on my Mac 10.5.8 a notice "this software is not supported by the CPU you are using" comes up. What gives?

When I try to open the EOS digital solution disk ver 24.1 for my new Canon Rebel T3i camera on my Mac 10.5.8 a notice "this software is not supported by the CPU you are using" comes up. Do I need this software? Can I just download the pictures to my Mac without using the Canon software?

When I try to open the EOS digital solution disk ver 24.1 for my new Canon Rebel T3i camera on my Mac 10.5.8 a notice "this software is not supported by the CPU you are using" comes up
You need to contact Canon - or read the software specs - it sounds like the software you got form them is not supported by your computer
Do I need this software?
Probably not - exactly what about it do you want?
Can I just download the pictures to my Mac without using the Canon software?
Probably - if you are shooting JPEG - launch iPhoto and in the iPhoto preferences set action when a camera is connected to launch iPhoto and connect your camera - iPhoto should launch and you should be able to import
Some cameras need to be set to mass storage mode - read your camera manual for details and procedures
If you are using RAW then your camera needs to be on this list and you need the versions of software noted - http://support.apple.com/kb/HT4757 - for older OS versions you can use google to find the list of supported cameras
LN

Blank screen comes up when I tap iTunes or App Store icon on my iPad. Am connected to wi-fi

Blank screen comes up when I try to open the iTunes Store or the App Store on my iPad. I am connected to wi-fi and just synced my iPad to my laptop.

Blank screen comes up when I try to open the iTunes Store or the App Store on my iPad. I am connected to wi-fi and just synced my iPad to my laptop.

The feature: "The edition of Reporting Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database." is not supported in this edition of Reporting Services.

Hello all,
I have SQL express 2014 advance edition installed ..
and i am connecting SQl server 2008 r2 instance which is in network
while creating datasource in Reportserver which has Express installed ..
got this error ..
please help me how to connect to remote server
Dilip Patil..

Error message says it all.
With SQL Express, Data source should be local SQL DB.
With SQL Enterprise, Standard, BI edition, you can create Data soruce which are hosted on other servers.
Please refer similar thread:
https://social.msdn.microsoft.com/Forums/en-US/c0468e3f-bad7-47a7-a695-75c13762280a/the-feature-the-edition-of-reporting-services-that-you-are-using-requires-that-you-use-local-sql?forum=sqlreportingservices
Cheers,
Vaibhav Chaudhari
[MCTS],
[MCP]

When ı update firefox 7 to 8 I can not enter the facebook site, when I try it, it says Uyumsuz bir internet tarayıcısı kullanıyorsun. ( it means in english : you are using an unsuportted web browser) how I can solve this problem?

when ı update firefox 7 to 8 I can not enter the facebook site, when I try it, it says Uyumsuz bir internet tarayıcısı kullanıyorsun. ( it means in english : you are using an unsuportted web browser) how I can solve this problem?

Step by step, how did you arrive at seeing this agreement?

Nintendo WII uses OPERA Browsers. The WII system should load the best opera browser. The problem is

Nintendo WII uses OPERA Browsers. The WII system should load the best opera browser. The problem is that it does not load flash player 8. [email protected] 619-366-9707

That's probably more a problem to ask Nintendo or Opera Software?
Mylenium

After purchasing the Export PDF Online software when I attempt to perform a "File/Save As" when viewing a document on the web it locks up windows explorer. I receive "FIle Save As - Not Responding"

After purchasing the Export PDF Online software when I attempt to perform a "File/Save As" when viewing a document on the web it locks up windows explorer. I receive "FIle Save As - Not Responding"

I think you may be correct. It is coincidental with my upgrade to Adobe Reader 11.0.10.
I have installed IE 11 (11.0.9600.17690)
It may be an Adobe Reader problem in that the "tools/file save as" dialog is completely empty. No local directories are displayed for saving to. When I try to Close(X) the "File Save As" box it pops up a message box on top that says "Adobe Reader is not Responding" It locks up all of my IE windows, not just the one with the PDF doc.
I need to go go Task Manager and stop the IE task. All my browser windows are then closed.
That is the only way to recover from the "Adobe Reader is Not Responding" message.

When I try to load Indesign, an error message appears: "the exploitation system you are using is no longer taking responsibility with Indesign". What can I do to load the software?

When I try to load Indesign, an error message appears: "the exploitation system you are using is no longer taking responsibility with Indesign". What can I do to load the software?

Do you have a license for InDesign?

"you are using an illegal copy of this application"

My iMac crashed last night. I powered it off and restarted it. From that point on, Civ V won't run. I installed it from the app store, paid for all the extra content, but now it says "You are using an illegal copy of this application" when I get to the screen where I would launch Civilization V: Campaign Edition. Clicking the Restore Purchases button gives me an Apple ID login prompt, but it never completes.
Any ideas how to get this fixed?

The App Store, iTunes and other Apple connection problem seem to have been corrected.
https://www.apple.com/support/systemstatus/

How can you manage data usage when cellular data is off, but you are using WiFi where your WiFi provider charges for data use?

I spend quite a few months each year in Canada where I use a Telus Cellular Hub device which is also my WiFi Router. My iPhone 5 has Cellular Data set to "Off" which insures I won't be charged via my Verizon Wireless Service Provider for charges while in Canada. Trouble is Telus, Rogers and all the Canadian Internet Providers charge for all Data going through their Systems. Again, My Cellular Data on the iPhone 5 is turned off, but I use WiFi for such things as checking the Weather, or FaceBook, or searching the Web.
I believe that things may be happening in the background from various Apps that use quite a lot of Data. It could be that iCloud is part of the issue with things being backed up automatically. It also could be that Apps like AP or other News Apps are sending large amounts of Data in the photos associated with their New Stories, etc. I typically turn off the App Store "Updates" such that they don't automatically load. The FaceBook works now posted videos play when you are just scrolling through the News Feed.
I have been trying to fine an article somewhere which focuses on this specific problem but unfortunately many if not most articles are about folks worried about using Cellular Data while in a WiFi environment when their Cellular Data is turned on.
Does anyone know of a fairly comprehensive article about what settings on which Apps might reduce the Data Usage when Cellular Data is turned "Off" but you are going through a Service Provider who charges for all Data Accessed even when you are using WiFi?

Thanks for your comments, it is clear you understand my plight. The trouble is fully understanding what Apps and App Features are transferring data in the background any time you happen to turn WiFi to on (even if you have had it off most of the day or night). Obviously things like Location Services can constantly be sending and receiving data from my iPhone without any action on my part. Also if you have things like photo backup on the iCloud then each time you take a photo you are sending a copy out. All App Updates if set to Automatic also can add up to quite a bit of Data. Reading the News on AP or scrolling through FB News Feed is actually adding up to a lot of Data. There could be other culprits that I am not even thinking of. I don't want to turn Apps like Find My Phone off or turn iCloud off due to loosing the value of such a program entirely. Again thanks for your quick response.

The version of GroupWise you are using cannot access this post office

I built a new Server and added it to my PCSD Tree. The new server name is
GroupWise and has an IP Address of 10.10.0.13.
I followed the GroupWise 7 Installation Guide and installed GroupWise to
this server. At no point did I find any place to enter the GroupWise
License.
During the install I discovered that 4 of my long time employees were not
able to be assigned to this new GroupWise server. It appears that a one
time (Long time ago) these 4 employees were part of an old GroupWise Mail
server that must have been removed. I can not find any reference to this
old GroupWise server. My thought is to delete the accounts for there 4
users and recreate the accounts.
However the larger problem is this: I can not login to the GroupWise
Server. Below are two screen shots of what I’m getting when I
launch the GroupWise 7 Client. When I look at the .NLM loaded on the
Server for GroupWise MTA 7.0 it shows Domain Total=1 Closed=0, Post
Offices Total=1 Closed=1, Gateways Total=0 Closed=0.
On the Client, when I launch GroupWise, The Novell GroupWise Startup has a
message in the message window “The version of GroupWise you are
using cannot access this post office”. Then after clicking OK three
times, the following message appears on the screen “GroupWise did
not initialize successfully, Please run GroupWise Setup, or contact your
system administrator. Unspecified error OLE Error 80004005

*During the install I discovered that 4 of my long time employees were not
able to be assigned to this new GroupWise server. It appears that a one
time (Long time ago) these 4 employees were part of an old GroupWise Mail
server that must have been removed. I can not find any reference to this
old GroupWise server. My thought is to delete the accounts for there 4
users and recreate the accounts.
**You need to disassociate these four NDS users from any GW attributes.
Right-click each user in C1, GroupWise Utilities->GW / eDirectory
Association->Disassociate GroupWise Attributes.
*** When I do as instructed I get the following error:
[username] is missing the following attribute: NGW: Post Office
~~~~~~~~~~~~~~~~~~~~~~~~
*GroupWise MTA 7.0 it shows Domain Total=1 Closed=0, Post
Offices Total=1 Closed=1, Gateways Total=0 Closed=0.
**If the post office is closed, you need to determine why this is. On the
MTA, hit F10, Configuration Status, highlight your PO and hit enter,
select details, then look at the last closure reason.
*** Last Closure Reason= Missing or incomplete address information
[ When I installed GroupWise, I wanted all the e-mail to be stored on the
EMAIL Volume. During the install, I Changed the Install Directory to
\Groupwiseemail. After the install I have two directories in this volume.
One called DOMAIN and the other called PCAM (PCAM is name of my domain).
~~~~~~~~~~~~~~~~~~~~~~~~
*On the Client, when I launch GroupWise, The Novell GroupWise Startup has
a message in the message window 'The version of GroupWise you are
using cannot access this post office'.
**What version of GroupWise is on the server and what version client are
you
using? Also, if you pull up the properties of both the domain and post
office in C1 what is the database version listed as?
*** I installed GroupWise 7 both Server and Client. I'm thinking this is
due to the Post Office being closed. I only have 1 Post Office.
Thank You;
Lewis

"You are using a browser (SAFARI 4.0.4) that is no longer supported"

I have a iMac (20-inch, Early 2009). I am currently running Yosemite OS X 10.10.2, and my Safari is the Version 8.0.4 (10600.4.10.7). My question is this, when I log into various secure accounts I get the following message "You are using a browser (SAFARI 4.0.4) that is no longer supported by its vendor. Beginning in October 2014, PenFed will no longer support this browser version. You are strongly encouraged to update your browser to ensure your data is protected while using the Internet."
Since the Lion release. all my updates have been on line through apple. Any thoughts and advice?
Thanks
<Re-Titled By Host>

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Iphone 4S, recently updated to IOS 7.0.2 When I try to sync with my Mac window pops up saying iphone requires itunes version 11.1 or later. Disconnected, switched both off and back on, no change. Any ideas?

I have an iphone 4S, recently updated to IOS 7.0.2. Tried syncing with my Mac but window pops up saying iphone requires itunes version 11.1 or later. Tried updateing itunes but it says it's up to date. Tried disconnecting, switching both phone and mac off and back on, no change. Any ideas?

bristles wrote:
... the version I'm on is 10.5.8.
If possible... you need to Upgrade to Snow Leopard = OS X 10.6.x (which will Run iTunes Version 11)
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard and iTunes.
Be sure to make a Backup of your Current System Before Upgrading...
NOTE:
You should also consider more RAM... Get the Maximum you can for your Mac...
It is important to get the Correct and Matching RAM
See Here > OWC RAM > http://www.macsales.com
The above site also has videos on how to Install RAM should you need it...

HT5622 Actually um trying to update new iOS 7 for my iphone 4 but when i press the button to install new software suddenly it appears why " iOs 7 failed verification because you are no longer connected to the internet " even my phone is already connected

hie there Actually um trying to update new iOS 7 for my iphone 4 but when i press the button to install new software suddenly it appears why " iOs 7 failed verification because you are no longer connected to the internet " even my phone is already connected to net

I tried powering down and re-starting the iPhone (as suggested at http://support.apple.com/kb/TS1275). This seems to have cleared the "...not connected to the Internet" problem, and iOS 6.1 is now in the process of downloading.
Thanks very much for your feedback.

This screen comes up when I'm editing my vista web site it says th3gallery requires jquery v1.2.2 or later you are using v1.4.1 my vista web site loads fine on Explorer browser, it has studdenly started to do this ? what do I need to do?

Similar Messages

Maybe you are looking for