Thread: Process exit code 1073741819
I am using JDeveloper 10.1.3 and specifically JSF technology to build a web application. Lately some pages stopped working or displaying with the command line of JDeveloper displaying the following error: "Process exit code 1073741819". Where can I find a reference for such codes and their meanings? I also need to know the meaning of this error and how it can be solved.
Thank you in advance for your help
Hi,
I have encountered a similar issue in one of my SSIS packages. The package performed the following tasks.
Check for the PSV files in the source directory. These files are of two types *phone*.psv format and *lead*.psv
Convert the new files into .xlsx files and then log the processed file names into another table
The file processing for the two types of files was being done in two different For Each Containers, which processed the files parallel'y if both the type of files were found.
The package ran fine when only one of the file types were found, but if both the types of files were found then the package failed with the same error.
"The return value was unknown. The process exit code was -1073741819. The step failed."
On checking up the details provided on this thread i found the culprit was the parallel file processing causing a conflict in the cache usage, thereby causing this error. (Refer
http://support.microsoft.com/kb/924016?wa=wsignin1.0 )
I then changed the package execution process in a manner that the two for each containers executed one after other even if both the types (phone, lead) of files were found. I basically made the control flow sequential from parallel.
The issue didn't reoccur a single time after that.
So the point here is to try and make the file processing tasks as serial (in CONTROL FLOW) as possible in the sequence of execution, thereby bypassing any instance where the two different operations doing similar job (thereby using the same cache) do not
create a conflict in package execution.
Hope this helps to clear the Air on this issue to some extent.
Thanks
Suvrat
Similar Messages
-
I am using JDeveloper 10.1.3 and specifically JSF technology to build a web application. Lately some pages stopped working or displaying with the command line of JDeveloper displaying the following error: "Process exit code 1073741819". Where can I find a reference for such codes and their meanings? I also need to know the meaning of this error and how it can be solved.
Thank you in advance for your helpHi,
I have encountered a similar issue in one of my SSIS packages. The package performed the following tasks.
Check for the PSV files in the source directory. These files are of two types *phone*.psv format and *lead*.psv
Convert the new files into .xlsx files and then log the processed file names into another table
The file processing for the two types of files was being done in two different For Each Containers, which processed the files parallel'y if both the type of files were found.
The package ran fine when only one of the file types were found, but if both the types of files were found then the package failed with the same error.
"The return value was unknown. The process exit code was -1073741819. The step failed."
On checking up the details provided on this thread i found the culprit was the parallel file processing causing a conflict in the cache usage, thereby causing this error. (Refer
http://support.microsoft.com/kb/924016?wa=wsignin1.0 )
I then changed the package execution process in a manner that the two for each containers executed one after other even if both the types (phone, lead) of files were found. I basically made the control flow sequential from parallel.
The issue didn't reoccur a single time after that.
So the point here is to try and make the file processing tasks as serial (in CONTROL FLOW) as possible in the sequence of execution, thereby bypassing any instance where the two different operations doing similar job (thereby using the same cache) do not
create a conflict in package execution.
Hope this helps to clear the Air on this issue to some extent.
Thanks
Suvrat -
I am working in Sqlserver 2008 R2, SSIS 64 bit version
I am getting the below error while scheduling the job in the development server Database.
The return value was unknown. The process exit code was -1073741819. The step failed.
The SSIS front end execution runs fine.
Have anyone faced this issue before?Hi Venkat,
If you already changed to 64bit and still doesn't work then create proxy account..
To create a proxy account
In Object Explorer, expand a server.
Expand SQL Server Agent.
Right-click Proxies and select New Proxy.
On the General page of the New Proxy Account dialog, specify the proxy name, credential name, and
description for the new proxy. Note that you must create a credential first before you create a proxy if one is not already available. For more information about creating a credential, see How
to: Create a Credential (SQL Server Management Studio) or CREATE CREDENTIAL (Transact-SQL).
Check the appropriate subsystem for this proxy.
On the Principals page, add or remove logins or roles to grant or remove access to the proxy account.
Thanks -
Process exited with exit code -1073741819+jdeveloper 9.0.5.1
Hi,
I am using JDeveloper 9.0.5.1 version.When i am compiling the java file it is compiling fine. But when I am running it it is throwing the error
Process exited with exit code -1073741819.
What is that error code means........?Hello,
It could mean that the cause is a StackOverflowError.
It could be that you are not running against your JDeveloper 9.0.5.1
embedded OC4J, but without noticing it, you are running your program
against another OC4J which would be incompatible!
May be you are running several JDevelopers on your machine, or
having a standalone OC4J and deployed your application against
such a different OC4J.
Try shutting down all the OC4J listeners on your machine, restart JDev
and run your java code again.
Hope this can help you.
Stephan -
Hi guys
Trying to run this package on SQL 2012 agent and getting below error . No more details I could find so far.
The step did not generate any output. The return value was unknown. The process exit code was -1073741819. The step failed.
About Package - Its connecting to different version (2000,2005,2008,2008R2,2012) servers and putting Jobs information into one Database table.
Any workaround or fix ?
Thanks
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to TeachNew package or one that used to work? Connecting how? How does it poll?
On the surface it is an error from a memory space of the binary/non-managed code, so nothing can be really concluded based on what you decided to share with us.
Arthur My Blog
So Same package is working fine from my local machine which has SQL 2008 R2 and SQL 2012 installed. I am trying to push the package on server which has sql server 2012 Installed .
I don't see any error .
I ran package manually from server using SQL Data tools and ran successfully...
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach -
System Update 5.06 won't install: MCSDKSetupRed.exe Process exit code: 1157
Win 7 x64 on Thinkpad W510. Original OS install from 2 years ago with multiple updates. Most recently, System Update 5.05. Manually downloaded and tried to install 5.06. Failed to uninstall old version, so I did a manual uninstall (deleted directories and searched all entries in registry and deleted). Now 5.06 no longer stalls at uninstall of ver 5.05, but fails to complete the install of 5.06 with the log entry
Filename: C:\ProgramData\Lenovo\tvsuinstaller\MCSDKSetupRed.exe
2014-07-05 20:16:57.243 Parameters: /S /qn /V/qn
2014-07-05 20:16:59.558 Process exit code: 1157
2014-07-05 20:16:59.561 -- Run entry --
2014-07-05 20:16:59.561 Run as: Current user
2014-07-05 20:16:59.561 Type: Exec
2014-07-05 20:16:59.561 Filename: C:\ProgramData\Lenovo\tvsuinstaller\UninstallSU.exe
2014-07-05 20:16:59.587 Need to restart Windows? No
2014-07-05 20:16:59.594 Deinitializing Setup.
2014-07-05 20:16:59.606 Log closed.
Solved!
Go to Solution.Hi,
What follows is guesswork on my part...
That 1157 error code translates to:
One of the library files needed to run this application cannot be found.
On the TVSU 5.06 page (here) under software requrements I see:
Microsoft .NET Framework version 1.1 with Service pack 1 or Microsoft .NET Framework version 2.0 is required for System Update to work Correctly. Use Microsoft Windows Update to ensure that Microsoft .NET Framework 1.1 or 2.0 is installed on your system.
Do you have an appropriate .NET installed?
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
I have a SSIS package that fails when running via sql server agent. I can successfully run it from BIDS. I have created a proxy account that is in the local server administrators group and is sysadmin. SQL Server Agent and SQL
Server Integration Services are running under the same account,
following the the error message:
Error: 2014-02-07 10:29:12.59
Code: 0xC0029151
Source: Execute De-linking Execute Process Task
Description: In Executing "d:\cie\files\working\9426\PowerpointConsole.exe" " 60.ppt" at "d:\cie\files\working\9426", The process exit code was "-532459699" while the expected was "0".
End Error
This package ran successfully on a different server running windows 2003 and sql server 2008 r2. The new environment is windows 7 with sql server 2008 r2.Hi Gaileg,
As Abhinav said, to check whether it is a 32-bit/64-bit issue, please check whether the package runs in 32-bit runtime mode or 64-bit runtime mode in BIDS by checking the Run64bitRuntime property of the project. Then, make sure the package runs in the same
runtime mode in the SQL Server Agent job by checking or unchecking the “Use 32 bit runtime” option for the Execution options of the job step.
If it is not the issue, please create another job that uses a CmdExec type job step to call the executable “D:\cie\files\working\9426\PowerpointConsole.exe”. If this job also fails, the issue is actually occurs because of the issue between executable and
SQL Server Agent rather than the SSIS package itself.
Regards,
Mike Yin
TechNet Community Support -
Ssis execute process task error: process exit code was 1 while the expected was 0
Hi Sir,
in my SSIS Package(2012) i am using Execute Process Task which will call bat file. bat file is located on UNC Path.i am having the below script in the batch file.
del \\servername\foldername\name.txt
rcmd \\servername D:\name1.bat
del \\servername\foldername\name2.txt
xcopy \\servername\foldername\file.txt \\server\foldername\outfilefolder
i am getting the below error message:
ssis execute process task error: process exit code was 1 while the expected was 0
i want know at what cases error exit code was 1?
Thanks for your time.Hi prasad.alm,
The error is generic and can be caused by various factors. Here are some suggestions for your reference:
Manually run the executable to execute the batch file so that we can check whether the command lines in the batch file are correct or not.
Check there are no duplicate/existing files in the destination folder.
Try to run the package in 32-bit or 64-bit runtime mode.
If the issue occurs when running a job, try to create a CmdExec type job step to call the excutable. If this job also fails, it might be an issue between executable and SQL Server Agent rather than the SSIS package itself.
If the issue persists, enable logging for the package, and check if we can obtain more detailed error message for further analysis.
Regards,
Mike Yin
TechNet Community Support -
Failed to initialize MSDB database for tuning (exit code: -1073741819). (DTAClient)
Hello,
This is the first time I am using this forum. I am stuck and need some help. I received this error message both on SQL 2005 and 2008. I am currently using SQL 2008 DEV for testing purposes and I am experiencing this error message when trying to connect to Database Engine Tuning Advisor. I am using the SA account so I should not have any security issues. Also this is a fresh install of SQL 2008 DEV on a fresh install of Windows XP Pro with all SP. Can some please help.
Error:
"Failed to initialize MSDB database for tuning (exit code: -1073741819). (DTAClient)"
===================================
Failed to open a new connection.
===================================
Failed to initialize MSDB database for tuning (exit code: -1073741819). (DTAClient)
Program Location:
at Microsoft.SqlServer.Management.DTA.Client.TuningServer.InitializeTuningParametersDatabase()
at Microsoft.SqlServer.Management.DTA.Client.TuningServer.InitializeConnection()
at Microsoft.SqlServer.Management.DTA.Client.TuningServer.Connect()
at Microsoft.SqlServer.Management.DTA.Shell.SessionMonitor.AddServerInternal(SqlConnectionInfo connectionInfo, SqlConnection connection)
at Microsoft.SqlServer.Management.DTA.Shell.SessionMonitor.AddServer(SqlConnectionInfo connectionInfo, SqlConnection connection)
at Microsoft.SqlServer.Management.DTA.Shell.SessionMonitor.OnConnect(Object sender, EventArgs e)I created the below MSDB SP and Tables. Now the issue is resolved.
http://www.devnewsgroups.net/sqlservertools/t67379-database-engine-tuning-advisor.aspx
USE [msdb]
GO
/****** Object: StoredProcedure [dbo].[sp_DTA_start_xmlprefix] Script
Date: 12/31/2008 10:56:11 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
create procedure [dbo].[sp_DTA_start_xmlprefix]
as
begin
declare @startTags nvarchar(128)
set @startTags = N'<DTAXML><DTAOutput><AnalysisReport>'
select @startTags
end
GO
/****** Object: Table [dbo].[DTA_input] Script Date: 12/31/2008 10:56:59
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_input](
[SessionName] [sysname] NOT NULL,
[SessionID] [int] IDENTITY(1,1) NOT NULL,
[TuningOptions] [ntext] NOT NULL,
[CreationTime] [datetime] NOT NULL DEFAULT (getdate()),
[ScheduledStartTime] [datetime] NOT NULL DEFAULT (getdate()),
[ScheduledJobName] [sysname] NOT NULL DEFAULT (''),
[InteractiveStatus] [tinyint] NOT NULL DEFAULT ((0)),
[LogTableName] [nvarchar](1280) NOT NULL DEFAULT (''),
[GlobalSessionID] [uniqueidentifier] NULL DEFAULT (newid()),
PRIMARY KEY CLUSTERED
[SessionID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_progress] Script Date: 12/31/2008
10:57:29 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_progress](
[ProgressEventID] [int] IDENTITY(1,1) NOT NULL,
[SessionID] [int] NULL,
[TuningStage] [tinyint] NOT NULL DEFAULT ((0)),
[WorkloadConsumption] [tinyint] NOT NULL,
[EstImprovement] [int] NOT NULL DEFAULT ((0)),
[ProgressEventTime] [datetime] NOT NULL DEFAULT (getdate()),
[ConsumingWorkLoadMessage] [nvarchar](256) NULL,
[PerformingAnalysisMessage] [nvarchar](256) NULL,
[GeneratingReportsMessage] [nvarchar](256) NULL
) ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_output] Script Date: 12/31/2008
10:57:10 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_output](
[SessionID] [int] NOT NULL,
[TuningResults] [ntext] NOT NULL,
[StopTime] [datetime] NOT NULL DEFAULT (getdate()),
[FinishStatus] [tinyint] NOT NULL DEFAULT ((0)),
PRIMARY KEY CLUSTERED
[SessionID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_tuninglog] Script Date: 12/31/2008
11:01:21 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_tuninglog](
[SessionID] [int] NOT NULL,
[RowID] [int] NOT NULL,
[CategoryID] [nvarchar](4) NOT NULL,
[Event] [ntext] NULL,
[Statement] [ntext] NULL,
[Frequency] [int] NOT NULL,
[Reason] [ntext] NULL
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_reports_database] Script Date:
12/31/2008 10:57:56 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_reports_database](
[DatabaseID] [int] IDENTITY(1,1) NOT NULL,
[SessionID] [int] NOT NULL,
[DatabaseName] [sysname] NOT NULL,
[IsDatabaseSelectedToTune] [int] NULL,
PRIMARY KEY CLUSTERED
[DatabaseID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_reports_query] Script Date: 12/31/2008
10:59:42 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_reports_query](
[QueryID] [int] NOT NULL,
[SessionID] [int] NOT NULL,
[StatementType] [smallint] NOT NULL,
[StatementString] [ntext] NOT NULL,
[CurrentCost] [float] NOT NULL,
[RecommendedCost] [float] NOT NULL,
[Weight] [float] NOT NULL,
[EventString] [ntext] NULL,
[EventWeight] [float] NOT NULL,
CONSTRAINT [DTA_reports_query_pk] PRIMARY KEY CLUSTERED
[SessionID] ASC,
[QueryID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_reports_querydatabase] Script Date:
12/31/2008 11:00:04 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_reports_querydatabase](
[QueryID] [int] NOT NULL,
[SessionID] [int] NOT NULL,
[DatabaseID] [int] NOT NULL
) ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_reports_table] Script Date: 12/31/2008
11:00:52 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_reports_table](
[TableID] [int] IDENTITY(1,1) NOT NULL,
[DatabaseID] [int] NOT NULL,
[SchemaName] [sysname] NOT NULL,
[TableName] [sysname] NOT NULL,
[IsView] [bit] NOT NULL DEFAULT ((0)),
PRIMARY KEY CLUSTERED
[TableID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_reports_partitionfunction] Script Date:
12/31/2008 10:58:57 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_reports_partitionfunction](
[PartitionFunctionID] [int] IDENTITY(1,1) NOT NULL,
[DatabaseID] [int] NOT NULL,
[PartitionFunctionName] [sysname] NOT NULL,
[PartitionFunctionDefinition] [ntext] NOT NULL,
PRIMARY KEY CLUSTERED
[PartitionFunctionID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_reports_partitionscheme] Script Date:
12/31/2008 10:59:19 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_reports_partitionscheme](
[PartitionSchemeID] [int] IDENTITY(1,1) NOT NULL,
[PartitionFunctionID] [int] NOT NULL,
[PartitionSchemeName] [sysname] NOT NULL,
[PartitionSchemeDefinition] [ntext] NOT NULL,
PRIMARY KEY CLUSTERED
[PartitionSchemeID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_reports_tableview] Script Date:
12/31/2008 11:01:02 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_reports_tableview](
[TableID] [int] NOT NULL,
[ViewID] [int] NOT NULL
) ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_reports_querytable] Script Date:
12/31/2008 11:00:33 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_reports_querytable](
[QueryID] [int] NOT NULL,
[SessionID] [int] NOT NULL,
[TableID] [int] NOT NULL
) ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_reports_index] Script Date: 12/31/2008
10:58:24 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_reports_index](
[IndexID] [int] IDENTITY(1,1) NOT NULL,
[TableID] [int] NOT NULL,
[IndexName] [sysname] NOT NULL,
[IsClustered] [bit] NOT NULL DEFAULT ((0)),
[IsUnique] [bit] NOT NULL DEFAULT ((0)),
[IsHeap] [bit] NOT NULL DEFAULT ((1)),
[IsExisting] [bit] NOT NULL DEFAULT ((1)),
[Storage] [float] NOT NULL,
[NumRows] [int] NOT NULL,
[IsRecommended] [bit] NOT NULL DEFAULT ((0)),
[RecommendedStorage] [float] NOT NULL,
[PartitionSchemeID] [int] NULL,
[SessionUniquefier] [int] NULL,
PRIMARY KEY CLUSTERED
[IndexID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_reports_column] Script Date: 12/31/2008
10:57:42 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_reports_column](
[ColumnID] [int] IDENTITY(1,1) NOT NULL,
[TableID] [int] NOT NULL,
[ColumnName] [sysname] NOT NULL,
PRIMARY KEY CLUSTERED
[ColumnID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_reports_queryindex] Script Date:
12/31/2008 11:00:19 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_reports_queryindex](
[QueryID] [int] NOT NULL,
[SessionID] [int] NOT NULL,
[IndexID] [int] NOT NULL,
[IsRecommendedConfiguration] [bit] NOT NULL
) ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_reports_querycolumn] Script Date:
12/31/2008 10:59:50 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_reports_querycolumn](
[QueryID] [int] NOT NULL,
[SessionID] [int] NOT NULL,
[ColumnID] [int] NOT NULL
) ON [PRIMARY]
GO
/****** Object: Table [dbo].[DTA_reports_indexcolumn] Script Date:
12/31/2008 10:58:39 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[DTA_reports_indexcolumn](
[IndexID] [int] NOT NULL,
[ColumnID] [int] NOT NULL,
[ColumnOrder] [int] NULL,
[PartitionColumnOrder] [int] NOT NULL DEFAULT ((0)),
[IsKeyColumn] [bit] NOT NULL DEFAULT ((1)),
[IsDescendingColumn] [bit] NOT NULL DEFAULT ((1))
) ON [PRIMARY]
GO
/****** Object: StoredProcedure [dbo].[sp_DTA_check_permission] Script
Date: 12/31/2008 10:53:21 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
create procedure [dbo].[sp_DTA_check_permission]
@SessionID int
as
begin
declare @retcode int
declare @dbname nvarchar(128)
declare @sql nvarchar(256)
declare @dbid int
set nocount on
-- Check if SA
if (isnull(IS_SRVROLEMEMBER(N'sysadmin'), 0) = 1)
begin
return(0)
end
-- if not yukon return
if (patindex('%9.00.%',@@version) = 0)
begin
return (1)
end
-- declare and open a cursor and get all the databases specified in the input
declare db_cursor cursor for
select DatabaseName from DTA_reports_database
where SessionID = @SessionID and IsDatabaseSelectedToTune = 1
-- open
open db_cursor
-- fetch first db name
fetch next from db_cursor
into @dbname
-- loop and get all the databases selected to tune
while @@fetch_status = 0
begin
-- build use db string
select @dbid = DB_ID(@dbname)
-- In Yukon this masks the error messages
set @sql = N'begin try
dbcc autopilot(5,@dbid) WITH NO_INFOMSGS
end try
begin catch
set @retcode = 1
end catch'
execute sp_executesql @sql
, N'@dbid int output, @retcode int OUTPUT'
, @dbid output
, @retcode output
-- if caller is not member of dbo
if (@retcode = 1)
begin
-- close and reset cursor,switch context to current
-- database and return 1
close db_cursor
deallocate db_cursor
return(1)
end
fetch from db_cursor into @dbname
end
-- close and reset cursor,switch context to current
-- database and return 1
close db_cursor
deallocate db_cursor
return(0)
end
GO
/****** Object: StoredProcedure [dbo].[sp_DTA_index_usage_helper_xml]
Script Date: 12/31/2008 10:54:29 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
create procedure [dbo].[sp_DTA_index_usage_helper_xml]
@SessionID int,
@IsRecommended int
as
begin
select 1 as Tag,
NULL as Parent,
'' as [IndexUsageReport!1!!ELEMENT],
case when @IsRecommended = 1 then 'false'
else 'true' end as [IndexUsageReport!1!Current],
NULL as [Database!2!DatabaseID!hide],
NULL as [Database!2!Name!ELEMENT] ,
NULL as [Schema!3!Name!ELEMENT] ,
NULL as [Table!4!TableID!hide],
NULL as [Table!4!Name!ELEMENT],
NULL as [Index!5!IndexID!hide],
NULL as [Index!5!Name!ELEMENT],
NULL as [Index!5!NumberOfReferences!ELEMENT],
NULL as [Index!5!PercentUsage!ELEMENT]
union all
select 2 as Tag,
1 as Parent,
NULL as [IndexUsageReport!1!!ELEMENT],
NULL as [IndexUsageReport!1!Current],
D.DatabaseID as [Database!2!DatabaseID!hide],
D.DatabaseName as [Database!2!Name!ELEMENT] ,
NULL as [Schema!3!Name!ELEMENT] ,
NULL as [Table!4!TableID!hide],
NULL as [Table!4!Name!ELEMENT],
NULL as [Index!5!IndexID!hide],
NULL as [Index!5!Name!ELEMENT],
NULL as [Index!5!NumberOfReferences!ELEMENT],
NULL as [Index!5!PercentUsage!ELEMENT]
from [msdb].[dbo].[DTA_reports_database] as D
where
D.SessionID = @SessionID and
D.DatabaseID in
(select D.DatabaseID from
[msdb].[dbo].[DTA_reports_queryindex] as QI,
[msdb].[dbo].[DTA_reports_index] as I,
[msdb].[dbo].[DTA_reports_table] as T,
[msdb].[dbo].[DTA_reports_database] as D
where
QI.IndexID = I.IndexID and
I.TableID = T.TableID and
T.DatabaseID = D.DatabaseID and
D.SessionID = @SessionID and
QI.IsRecommendedConfiguration = @IsRecommended
GROUP BY D.DatabaseID)
union all
select 3 as Tag,
2 as Parent,
NULL as [IndexUsageReport!1!!ELEMENT],
NULL as [IndexUsageReport!1!Current],
D.DatabaseID as [Database!2!DatabaseID!hide],
D.DatabaseName as [Database!2!Name!ELEMENT] ,
R.SchemaName as [Schema!3!Name!ELEMENT] ,
NULL as [Table!4!TableID!hide],
NULL as [Table!4!Name!ELEMENT],
NULL as [Index!5!IndexID!hide],
NULL as [Index!5!Name!ELEMENT],
NULL as [Index!5!NumberOfReferences!ELEMENT],
NULL as [Index!5!PercentUsage!ELEMENT]
from [msdb].[dbo].[DTA_reports_database] as D,
select D.DatabaseID,T.SchemaName from
[msdb].[dbo].[DTA_reports_queryindex] as QI,
[msdb].[dbo].[DTA_reports_index] as I,
[msdb].[dbo].[DTA_reports_table] as T,
[msdb].[dbo].[DTA_reports_database] as D
where
QI.IndexID = I.IndexID and
I.TableID = T.TableID and
T.DatabaseID = D.DatabaseID and
QI.IsRecommendedConfiguration = @IsRecommended and
D.SessionID = @SessionID
GROUP BY D.DatabaseID,T.SchemaName
) R
where
D.SessionID = @SessionID and
D.DatabaseID = R.DatabaseID
union all
select 4 as Tag,
3 as Parent,
NULL as [IndexUsageReport!1!!ELEMENT],
NULL as [IndexUsageReport!1!Current],
D.DatabaseID as [Database!2!DatabaseID!hide],
D.DatabaseName as [Database!2!Name!ELEMENT] ,
R.SchemaName as [Schema!3!Name!ELEMENT] ,
R.TableID as [Table!4!TableID!hide],
T.TableName as [Table!4!Name!ELEMENT],
NULL as [Index!5!IndexID!hide],
NULL as [Index!5!Name!ELEMENT],
NULL as [Index!5!NumberOfReferences!ELEMENT],
NULL as [Index!5!PercentUsage!ELEMENT]
from [msdb].[dbo].[DTA_reports_database] as D,
[msdb].[dbo].[DTA_reports_table] as T,
select D.DatabaseID,T.SchemaName,T.TableID from
[msdb].[dbo].[DTA_reports_queryindex] as QI,
[msdb].[dbo].[DTA_reports_index] as I,
[msdb].[dbo].[DTA_reports_table] as T,
[msdb].[dbo].[DTA_reports_database] as D
where
QI.IndexID = I.IndexID and
I.TableID = T.TableID and
T.DatabaseID = D.DatabaseID and
D.SessionID = @SessionID and
QI.IsRecommendedConfiguration = @IsRecommended
GROUP BY D.DatabaseID,T.SchemaName, T.TableID
) R
where
D.SessionID = @SessionID and
D.DatabaseID = R.DatabaseID and
R.TableID = T.TableID and
T.DatabaseID = D.DatabaseID
union all
select 5 as Tag,
4 as Parent,
NULL as [IndexUsageReport!1!!ELEMENT],
NULL as [IndexUsageReport!1!Current],
D1.DatabaseID as [Database!2!DatabaseID!hide],
D1.DatabaseName as [Database!2!Name!ELEMENT] ,
T1.SchemaName as [Schema!3!Name!ELEMENT] ,
T1.TableID as [Table!4!TableID!hide],
T1.TableName as [Table!4!Name!ELEMENT],
I1.IndexID as [Index!5!IndexID!hide],
I1.IndexName as [Index!5!Name!ELEMENT],
R.Count as [Index!5!NumberOfReferences!ELEMENT],
CAST(R.Usage as decimal(38,2)) as [Index!5!PercentUsage!ELEMENT]
from
[msdb].[dbo].[DTA_reports_database] as D1 ,
[msdb].[dbo].[DTA_reports_index] as I1,
[msdb].[dbo].[DTA_reports_table] as T1,
select D.DatabaseID,T.TableID ,
I.IndexID ,SUM(Q.Weight) as Count,
100.0 * SUM(Q.Weight) /
( 1.0 * ( select CASE WHEN SUM(Q.Weight) > 0 THEN SUM(Q.Weight)
else 1
end
from [msdb].[dbo].[DTA_reports_query] as Q
where Q.SessionID = @SessionID ))
as Usage
from
[msdb].[dbo].[DTA_reports_index] as I
LEFT OUTER JOIN
[msdb].[dbo].[DTA_reports_queryindex] as QI ON QI.IndexID = I.IndexID
LEFT OUTER JOIN
[msdb].[dbo].[DTA_reports_query] as Q ON QI.QueryID = Q.QueryID
JOIN
[msdb].[dbo].[DTA_reports_table] as T ON I.TableID = T.TableID
JOIN
[msdb].[dbo].[DTA_reports_database] as D ON T.DatabaseID = D.DatabaseID
and Q.SessionID = QI.SessionID and
QI.IsRecommendedConfiguration = @IsRecommended and
Q.SessionID = @SessionID
GROUP BY I.IndexID,T.TableID,D.DatabaseID) as R
where R.DatabaseID = D1.DatabaseID and
R.TableID = T1.TableID and
R.IndexID = I1.IndexID and
D1.SessionID = @SessionID and
R.Count > 0
order by
[Database!2!DatabaseID!hide],[Schema!3!Name!ELEMENT],[Table!4!TableID!hide],
[Index!5!NumberOfReferences!ELEMENT] , [Index!5!IndexID!hide]
FOR XML EXPLICIT
end
GO
/****** Object: StoredProcedure
[dbo].[sp_DTA_index_usage_helper_relational] Script Date: 12/31/2008
10:54:26 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
create procedure [dbo].[sp_DTA_index_usage_helper_relational]
@SessionID int,
@IsRecommended int
as begin select D1.DatabaseName as 'Database Name' ,T1.SchemaName as
'Schema Name' ,T1.TableName as 'Table/View Name' ,I1.IndexName as 'Index
Name' ,R.Count as 'Number of references' ,CAST(R.Usage as decimal(38,2)) as
'Percent Usage' from
DTA_reports_database as D1 ,
DTA_reports_index as I1,
DTA_reports_table as T1,
select D.DatabaseID,T.TableID ,
I.IndexID ,SUM(Q.Weight) as Count,
100.0 * SUM(Q.Weight) /
( 1.0 * ( select CASE WHEN SUM(Q.Weight) > 0 THEN SUM(Q.Weight)
else 1
end
from [msdb].[dbo].[DTA_reports_query] as Q
where Q.SessionID = @SessionID ))
as Usage
from
[msdb].[dbo].[DTA_reports_index] as I
LEFT OUTER JOIN
[msdb].[dbo].[DTA_reports_queryindex] as QI ON QI.IndexID = I.IndexID
LEFT OUTER JOIN
[msdb].[dbo].[DTA_reports_query] as Q ON QI.QueryID = Q.QueryID
JOIN
[msdb].[dbo].[DTA_reports_table] as T ON I.TableID = T.TableID
JOIN
[msdb].[dbo].[DTA_reports_database] as D ON T.DatabaseID = D.DatabaseID
and Q.SessionID = QI.SessionID and
QI.IsRecommendedConfiguration = @IsRecommended and
Q.SessionID = @SessionID
GROUP BY I.IndexID,T.TableID,D.DatabaseID) as R
where R.DatabaseID = D1.DatabaseID and
R.TableID = T1.TableID and
R.IndexID = I1.IndexID and
D1.SessionID = @SessionID and
R.Count > 0
order by R.Count desc end
GO
/****** Object: StoredProcedure [dbo].[sp_DTA_database_access_helper_xml]
Script Date: 12/31/2008 10:53:31 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
create procedure [dbo].[sp_DTA_database_access_helper_xml]
@SessionID int
as
begin
select 1 as Tag,
NULL as Parent,
'' as [DatabaseAccessReport!1!!ELEMENT],
NULL as [Database!2!Name!ELEMENT] ,
NULL as [Database!2!NumberOfReferences!ELEMENT],
NULL as [Database!2!PercentUsage!ELEMENT]
union all
select 2 as Tag, 1 as Parent,NULL,D1.DatabaseName ,
R.Count ,
CAST(R.Usage as decimal(38,2)) from
[msdb].[dbo].[DTA_reports_database] as D1 ,
select D.DatabaseID,SUM(Q.Weight) as Count,
100.0 * SUM(Q.Weight) /
( 1.0 * ( select CASE WHEN SUM(Q.Weight) > 0 THEN SUM(Q.Weight)
else 1
end
from [msdb].[dbo].[DTA_reports_query] as Q
where Q.SessionID = @SessionID ))
as Usage
from
[msdb].[dbo].[DTA_reports_database] as D
LEFT OUTER JOIN
[msdb].[dbo].[DTA_reports_querydatabase] as QD ON QD.DatabaseID =
D.DatabaseID
LEFT OUTER JOIN
[msdb].[dbo].[DTA_reports_query] as Q ON QD.QueryID = Q.QueryID
and Q.SessionID = QD.SessionID and
Q.SessionID = @SessionID
GROUP BY D.DatabaseID
) as R
where R.DatabaseID = D1.DatabaseID and
D1.SessionID = @SessionID and
R.Count > 0
order by Tag,[Database!2!NumberOfReferences!ELEMENT] desc
FOR XML EXPLICIT
end
GO -
Execute Process Task - Error :The process exit code was "2" while the expected was "0".
I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.
For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
I am using the Execute Process Task and the process parameters I am providing are:
WorkingDirectory : C:\Program Files (x86)\Microsoft SQL Server\90\COM
Executable : C:\SQL_bat_Files\SQL5\TC_CTI\customer.bat
The customer.bat file will have the following code:
tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:\SQL_bat_Files\sql5\TC_CTI\sql_files\customer1"
the .sql file will be generated at: C:\SQL_bat_Files\sql5\TC_CTI\sql_files\customer1.
The Problem:
The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
[Execute Process Task] Error: In Executing "C:\SQL_bat_Files\SQL5\TC_CTI\package_occurrence.bat" "" at "C:\Program Files (x86)\Microsoft SQL Server\90\COM", The process exit code was "2" while the expected was "0". ]
Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
Can anyone help ?Jwelch,
Thanks for the input,
"Change the SuccessValue property of the Execute Process task from 0 to 2 (which means that you will get a failure if there are no differences, since TableDiff returns 0 in that case)."
-- Not possible b'coz if there is no difference in the tables, which is also a possiblility, the job will fail.
"FailTaskIfReturnCodeIsNotSuccessValue to FALSE (which means it won't fail regardless of the code returned)."
-- Does this mean the job will never fail? Lets say the target table doesnt exist, then, by setting "FailTaskIfReturnCodeIsNotSuccessValue to FALSE " will the job fail? I guess my question is, how is what you've suggested different from setting "ForceExecutionResult = Success". Both the cases will show the task status "Success" even if there is an error.
Is there a way to keep the property of job 'Failure' if there is any generic errors like target table not found or say, the path given for .sql file output is not valid etc.
Thanks again,
Little_Birdie. -
SSIS fails with error : The process exit code was -1073741701
Hello All,
I am having issues with SSIS packages running from SQL agent job.
The server we are running the job is used for SSIS and there are lot of other SSIS jobs that are running.
We were able to run the job once successfully and the later runs are failing with the below error.(nothing has been changed)
The step did not generate any output. The return value was unknown. The process exit code was -1073741701. The step failed.
Nothing is being logged in the [catalog].[operations] or operation_messages view. When tuned the profiler ON we do not see the job trying to connect to SSISDB at all. I am assuming that the job is failing much before if does any thing.
I have moved the package to a different server and ran it with the same proxy account and it works fine there.
Any help or suggestion on this issue would be helpful.
Thanks !Hi SQL_Help,
You can run the job once successfully and the later runs are failing with the below error ran it as a Job. “The step did not generate any output. The return value was unknown. The process exit code was -1073741701. The step failed.” It
was really a generic error message with no information with it.
We can use Process Monitor and Event Viewer to capture the detail error message. Then based on the error message to fix this issue. The following similar issue is for your reference:
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2014/05/22/ssis-package-fails-with-error-the-step-did-not-generate-any-output-the-return-value-was-unknown.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
IE 11 ERROR: Neutral package installation failed (exit code = 0x00003715 (14101)).
Below is the log.
00:00.000: ====================================================================
00:00.063: Started: 2014/05/29 (Y/M/D) 16:48:19.266 (local)
00:00.094: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds)
00:00.125: Command line: "C:\Windows\SoftwareDistribution\Download\Install\IE11-Windows6.1-x64-en-us.exe" /WU-SILENT
00:00.156: INFO: Setup installer for Internet Explorer: 11.0.9600.16428
00:00.203: INFO: Previous version of Internet Explorer: 8.0.7601.17514
00:00.234: INFO: Checking if iexplore.exe's current version is between 11.0.9600.0...
00:00.266: INFO: ...and 11.1.0.0...
00:00.297: INFO: Maximum version on which to run IEAK branding is: 11.1.0.0...
00:00.312: INFO: iexplore.exe version check success. Install can proceed.
00:00.328: INFO: Operating System: Windows Workstation: 6.1.7601 (Service Pack 1)
00:00.344: INFO: Trying to extract ID: SetupDownloadList.txt (0) as "SetupDownloadList.txt"
00:00.359: INFO: Trying to extract ID: HardwareBlockingList.xml (0) as "HardwareBlockingList.xml"
00:00.390: INFO: Trying to extract ID: 7006 (0) as "IE11-neutral.Extracted.cab"
00:00.671: INFO: Trying to extract ID: 5501 (1033) as "Spelling_en.msu"
00:00.780: INFO: Extracted Spelling dictionary for en to C:\Windows\TEMP\IE1299F.tmp\Spelling_en.msu.
00:00.796: INFO: Trying to extract ID: 5502 (1033) as "Hyphenation_en.msu"
00:00.812: INFO: Extracted Hyphenation dictionary for en to C:\Windows\TEMP\IE1299F.tmp\Hyphenation_en.msu.
00:00.843: INFO: Trying to extract ID: 7128 (1033) as "IE11-support.cab"
00:03.276: INFO: Updated Download list, Hardware Blocking list, and no reboot policy files successfully downloaded and extracted for use.
00:03.323: INFO: Launched program to check hardware: "C:\Windows\TEMP\IE1299F.tmp\IE11-SUPPORT\IEXPLORE.EXE" /CheckHardware "C:\Windows\TEMP\IE1299F.tmp\IE11-support\HardwareBlockingList.xml"
00:03.573: INFO: Hardware support check succeeded. Installation will continue.
00:03.588: INFO: Windows 7 operating system detected.
00:03.604: INFO: Service pack major: 1
00:03.620: INFO: Service pack minor: 0
00:03.635: INFO: Service pack name: Service Pack 1
00:03.713: INFO: Version Check for (KB2834140) of C:\Windows\System32\d3d11.dll: 6.1.7601.17514 >= 6.2.9200.16570 (False)
00:03.869: WARNING: Checking version for C:\Windows\System32\api-ms-win-downlevel-user32-l1-1-0.dll. The file does not exist.
00:03.900: INFO: Version Check for (KB2639308) of C:\Windows\System32\Ntoskrnl.exe: 6.1.7601.17514 >= 6.1.7601.17727 (False)
00:03.932: INFO: Version Check for (KB2533623) of C:\Windows\System32\api-ms-win-security-base-l1-1-0.dll: 6.1.7600.16385 >= 6.1.7601.17617 (False)
00:03.963: INFO: Version Check for (KB2731771) of C:\Windows\System32\conhost.exe: 6.1.7601.17514 >= 6.1.7601.17888 (False)
00:03.978: INFO: Checking for correct version of C:\Windows\Fonts\segoeui.ttf.
00:04.010: INFO: Version Check for (KB2786081) of C:\Windows\System32\taskhost.exe: 6.1.7601.17514 >= 6.1.7601.18010 (False)
00:04.056: INFO: Version Check for (KB2888049) of C:\Windows\System32\drivers\tcpip.sys: 6.1.7601.17514 >= 6.1.7601.18254 (False)
00:04.119: INFO: Version Check for (KB2882822) of C:\Windows\System32\tdh.dll: 6.1.7600.16385 >= 6.1.7601.18247 (False)
00:07.052: INFO: IE Setup prerequisite package for KB2834140 included: C:\Windows\TEMP\IE1299F.tmp\KB2834140_amd64.cab
00:07.083: INFO: IE Setup prerequisite package for KB2834140 included: C:\Windows\TEMP\IE1299F.tmp\KB2834140_amd64.cab
00:07.114: INFO: A local copy of the KB2834140 installation package has been copied to KB2834140_amd64.MSU.
00:07.130: INFO: IE Setup prerequisite package for KB2670838 included: C:\Windows\TEMP\IE1299F.tmp\KB2670838_amd64.cab
00:07.145: INFO: IE Setup prerequisite package for KB2670838 included: C:\Windows\TEMP\IE1299F.tmp\KB2670838_amd64.cab
00:07.176: INFO: A local copy of the KB2670838 installation package has been copied to KB2670838_amd64.CAB.
00:07.192: INFO: IE Setup prerequisite package for KB2639308 included: C:\Windows\TEMP\IE1299F.tmp\KB2639308_amd64.cab
00:07.223: INFO: IE Setup prerequisite package for KB2639308 included: C:\Windows\TEMP\IE1299F.tmp\KB2639308_amd64.cab
00:07.239: INFO: A local copy of the KB2639308 installation package has been copied to KB2639308_amd64.CAB.
00:07.270: INFO: IE Setup prerequisite package for KB2533623 included: C:\Windows\TEMP\IE1299F.tmp\KB2533623_amd64.cab
00:07.286: INFO: IE Setup prerequisite package for KB2533623 included: C:\Windows\TEMP\IE1299F.tmp\KB2533623_amd64.cab
00:07.317: INFO: A local copy of the KB2533623 installation package has been copied to KB2533623_amd64.MSU.
00:07.348: INFO: IE Setup prerequisite package for KB2731771 included: C:\Windows\TEMP\IE1299F.tmp\KB2731771_amd64.cab
00:07.364: INFO: IE Setup prerequisite package for KB2731771 included: C:\Windows\TEMP\IE1299F.tmp\KB2731771_amd64.cab
00:07.395: INFO: A local copy of the KB2731771 installation package has been copied to KB2731771_amd64.CAB.
00:07.410: INFO: IE Setup prerequisite package for KB2729094 included: C:\Windows\TEMP\IE1299F.tmp\KB2729094_amd64.cab
00:07.442: INFO: IE Setup prerequisite package for KB2729094 included: C:\Windows\TEMP\IE1299F.tmp\KB2729094_amd64.cab
00:07.473: INFO: A local copy of the KB2729094 installation package has been copied to KB2729094_amd64.MSU.
00:07.488: INFO: IE Setup prerequisite package for KB2786081 included: C:\Windows\TEMP\IE1299F.tmp\KB2786081_amd64.cab
00:07.520: INFO: IE Setup prerequisite package for KB2786081 included: C:\Windows\TEMP\IE1299F.tmp\KB2786081_amd64.cab
00:07.535: INFO: A local copy of the KB2786081 installation package has been copied to KB2786081_amd64.CAB.
00:07.566: INFO: IE Setup prerequisite package for KB2888049 included: C:\Windows\TEMP\IE1299F.tmp\KB2888049_amd64.cab
00:07.613: INFO: IE Setup prerequisite package for KB2888049 included: C:\Windows\TEMP\IE1299F.tmp\KB2888049_amd64.cab
00:07.629: INFO: A local copy of the KB2888049 installation package has been copied to KB2888049_amd64.MSU.
00:07.691: INFO: IE Setup prerequisite package for KB2882822 included: C:\Windows\TEMP\IE1299F.tmp\KB2882822_amd64.cab
00:07.800: INFO: IE Setup prerequisite package for KB2882822 included: C:\Windows\TEMP\IE1299F.tmp\KB2882822_amd64.cab
00:07.832: INFO: A local copy of the KB2882822 installation package has been copied to KB2882822_amd64.MSU.
00:07.863: INFO: IE Setup Language pack included: C:\Windows\TEMP\IE1299F.tmp\IE-Spelling-en.cab
00:07.894: INFO: IE Setup Language pack included: C:\Windows\TEMP\IE1299F.tmp\IE-Hyphenation-en.cab
00:08.066: INFO: Waiting for 9 prerequisite downloads.
00:08.081: INFO: Prerequisite download processes have completed. Starting Installation of 9 prerequisites.
00:08.128: INFO: Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1299F.tmp\KB2834140_amd64.cab /quiet /norestart
00:38.049: INFO: Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
00:38.080: INFO: Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1299F.tmp\KB2670838_amd64.cab /quiet /norestart
02:22.117: INFO: Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
02:22.164: INFO: Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1299F.tmp\KB2639308_amd64.cab /quiet /norestart
02:59.199: INFO: Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
02:59.230: INFO: Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1299F.tmp\KB2533623_amd64.cab /quiet /norestart
03:38.074: INFO: Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
03:38.121: INFO: Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1299F.tmp\KB2731771_amd64.cab /quiet /norestart
04:24.765: INFO: Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
04:24.796: INFO: Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1299F.tmp\KB2729094_amd64.cab /quiet /norestart
04:56.652: INFO: Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
04:56.683: INFO: Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1299F.tmp\KB2786081_amd64.cab /quiet /norestart
05:01.972: INFO: Process exit code 0x00000000 (0) [The operation completed successfully. ]
05:02.003: INFO: Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1299F.tmp\KB2888049_amd64.cab /quiet /norestart
05:38.164: INFO: Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
05:38.179: INFO: Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1299F.tmp\KB2882822_amd64.cab /quiet /norestart
06:22.702: INFO: Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
06:22.749: INFO: The neutral pack was successfully downloaded from the internet. Installation will continue using the downloaded package.
06:22.780: INFO: Waiting for 0 language pack downloads.
06:22.796: INFO: Language pack downloads completed. (exit code = 0xffffffff (4294967295)).
06:23.030: INFO: No reboot logic message NrApiStart(0), lParam=0x000227e8 returned 0x00000000.
06:24.184: INFO: No reboot logic message NrApiScan(1), lParam=0x00000001 returned 0x00000000.
06:24.200: INFO: No reboot logic message NrApiStartInstall(4), lParam=0x00000001 returned 0x00000014.
06:24.231: INFO: Installing with the downloaded package. C:\Windows\TEMP\IE1299F.tmp\IE11-neutral.Downloaded.cab
06:24.246: INFO: Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1299F.tmp\IE11-neutral.Downloaded.cab /quiet /norestart
07:49.860: INFO: Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
07:49.922: INFO: Setting registry to check if Internet Explorer is the default browser on first run: SUCCESS.
07:49.953: INFO: Preparing to install Spelling_en.msu using C:\Windows\TEMP\IE1299F.tmp\Spelling_en.msu
07:50.031: INFO: Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1299F.tmp\Spelling_en\Windows6.3-KB2849696-x86.cab /quiet /norestart
08:41.933: INFO: Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
08:41.964: INFO: Preparing to install Hyphenation_en.msu using C:\Windows\TEMP\IE1299F.tmp\Hyphenation_en.msu
08:42.042: INFO: Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1299F.tmp\Hyphenation_en\Windows6.3-KB2849697-x86.cab /quiet /norestart
09:32.758: INFO: Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
09:32.789: INFO: Preparing to install IE-Spelling-en.cab using C:\Windows\TEMP\IE1299F.tmp\IE-Spelling-en.cab
09:32.820: INFO: Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1299F.tmp\IE-Spelling-en.cab /quiet /norestart
09:49.372: INFO: Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
09:49.388: INFO: Preparing to install IE-Hyphenation-en.cab using C:\Windows\TEMP\IE1299F.tmp\IE-Hyphenation-en.cab
09:49.419: INFO: Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1299F.tmp\IE-Hyphenation-en.cab /quiet /norestart
10:05.565: INFO: Process exit code 0x00000BC2 (3010) [The requested operation is successful. Changes will not be effective until the system is rebooted. ]
10:05.581: INFO: No reboot logic message NrApiInstallDone(7), lParam=0x00000bc2 returned 0x00000000.
10:05.596: INFO: No reboot logic message NrApiStartFinish(11), lParam=0x00000000 returned 0x00000000.
10:05.752: INFO: No reboot logic message NrApiFinish(12), lParam=0x00000000 returned 0x00000016.
10:05.799: INFO: Verifying that the Internet Explorer Optional Component is enabled.
10:05.893: INFO: Setup exit code: 0x00000BC2 (3010) - Installation Succeeded. Reboot required.
10:05.986: INFO: Cleaning up temporary files in: C:\Windows\TEMP\IE1299F.tmp
10:06.033: INFO: Unable to remove directory C:\Windows\TEMP\IE1299F.tmp, marking for deletion on reboot.
10:06.095: INFO: Released Internet Explorer Installer Mutex
00:00.000: ====================================================================
00:00.047: Started: 2015/04/08 (Y/M/D) 16:31:22.090 (local)
00:00.063: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds)
00:00.078: Command line: "C:\Windows\ccmcache\8\IE11-Windows6.1-x64-en-us.exe" /passive /quiet /norestart
00:00.094: INFO: Setup installer for Internet Explorer: 11.0.9600.16428
00:00.125: INFO: Previous version of Internet Explorer: 8.0.7601.18404
00:00.141: INFO: Checking if iexplore.exe's current version is between 11.0.9600.0...
00:00.156: INFO: ...and 11.1.0.0...
00:00.172: INFO: Maximum version on which to run IEAK branding is: 11.1.0.0...
00:00.203: INFO: iexplore.exe version check success. Install can proceed.
00:00.250: INFO: Operating System: Windows Workstation: 6.1.7601 (Service Pack 1)
00:00.297: INFO: Trying to extract ID: SetupDownloadList.txt (0) as "SetupDownloadList.txt"
00:00.312: INFO: Trying to extract ID: HardwareBlockingList.xml (0) as "HardwareBlockingList.xml"
00:00.328: INFO: Trying to extract ID: 7006 (0) as "IE11-neutral.Extracted.cab"
00:00.702: INFO: Trying to extract ID: 5501 (1033) as "Spelling_en.msu"
00:00.936: INFO: Extracted Spelling dictionary for en to C:\Windows\TEMP\IE1AD8.tmp\Spelling_en.msu.
00:01.092: INFO: Trying to extract ID: 5502 (1033) as "Hyphenation_en.msu"
00:01.155: INFO: Extracted Hyphenation dictionary for en to C:\Windows\TEMP\IE1AD8.tmp\Hyphenation_en.msu.
00:01.233: INFO: Trying to extract ID: 7128 (1033) as "IE11-support.cab"
00:02.184: INFO: PauseOrResumeAUThread: Successfully paused Automatic Updates.
00:05.632: INFO: Updated Download list, Hardware Blocking list, and no reboot policy files successfully downloaded and extracted for use.
00:05.663: INFO: Launched program to check hardware: "C:\Windows\TEMP\IE1AD8.tmp\IE11-SUPPORT\IEXPLORE.EXE" /CheckHardware "C:\Windows\TEMP\IE1AD8.tmp\IE11-support\HardwareBlockingList.xml"
00:06.162: INFO: Graphics Device Information: Intel(R) HD Graphics 4000
00:06.178: INFO: Hardware support check succeeded. Installation will continue.
00:06.194: INFO: Windows 7 operating system detected.
00:06.225: INFO: Service pack major: 1
00:06.240: INFO: Service pack minor: 0
00:06.256: INFO: Service pack name: Service Pack 1
00:06.443: INFO: Version Check for (KB2834140) of C:\Windows\System32\d3d11.dll: 6.2.9200.16570 >= 6.2.9200.16570 (True)
00:06.490: INFO: Version Check for (KB2670838) of C:\Windows\System32\api-ms-win-downlevel-user32-l1-1-0.dll: 6.2.9200.16492 >= 6.2.9200.16426 (True)
00:06.537: INFO: Version Check for (KB2639308) of C:\Windows\System32\Ntoskrnl.exe: 6.1.7601.18741 >= 6.1.7601.17727 (True)
00:06.615: INFO: Version Check for (KB2533623) of C:\Windows\System32\api-ms-win-security-base-l1-1-0.dll: 6.1.7601.18229 >= 6.1.7601.17617 (True)
00:06.662: INFO: Version Check for (KB2731771) of C:\Windows\System32\conhost.exe: 6.1.7601.18229 >= 6.1.7601.17888 (True)
00:06.677: INFO: Checking for correct version of C:\Windows\Fonts\segoeui.ttf.
00:06.693: INFO: Version Check for (KB2786081) of C:\Windows\System32\taskhost.exe: 6.1.7601.18010 >= 6.1.7601.18010 (True)
00:06.833: INFO: Version Check for (KB2888049) of C:\Windows\System32\drivers\tcpip.sys: 6.1.7601.18438 >= 6.1.7601.18254 (True)
00:06.974: INFO: Version Check for (KB2882822) of C:\Windows\System32\tdh.dll: 6.1.7601.18247 >= 6.1.7601.18247 (True)
00:33.509: INFO: Waiting for 0 prerequisite downloads.
03:00.993: INFO: The neutral pack was successfully downloaded from the internet. Installation will continue using the downloaded package.
03:01.180: INFO: Waiting for 0 language pack downloads.
03:01.195: INFO: Language pack downloads completed. (exit code = 0xffffffff (4294967295)).
03:01.273: INFO: No reboot logic message NrApiStart(0), lParam=0x00531188 returned 0x00000000.
03:02.412: INFO: No reboot logic message NrApiScan(1), lParam=0x00000001 returned 0x00000000.
03:02.459: INFO: No reboot logic message NrApiStartInstall(4), lParam=0x00000001 returned 0x00000014.
03:02.475: INFO: Installing with the downloaded package. C:\Windows\TEMP\IE1AD8.tmp\IE11-neutral.Downloaded.cab
03:02.521: INFO: Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1AD8.tmp\IE11-neutral.Downloaded.cab /quiet /norestart
03:29.556: INFO: Process exit code 0x00003715 (14101) [The identities of the manifests are identical but their contents are different. ]
03:29.619: ERROR: Neutral package installation failed (exit code = 0x00003715 (14101)).
03:29.634: INFO: No reboot logic message NrApiInstallDone(7), lParam=0x00009c59 returned 0x00000000.
03:29.650: INFO: No reboot logic message NrApiStartFinish(11), lParam=0x00000000 returned 0x00000000.
03:29.759: INFO: No reboot logic message NrApiFinish(12), lParam=0x00000000 returned 0x00000016.
03:29.775: INFO: Waiting for Active Setup to complete.
03:29.806: ERROR: Couldn't create setup troubleshooting shortcut on the desktop. HRESULT: 0x80070002,
03:29.837: INFO: PauseOrResumeAUThread: Successfully resumed Automatic Updates.
03:29.853: INFO: Setup exit code: 0x00009C59 (40025) - The neutral cab failed to install.
03:29.900: INFO: Cleaning up temporary files in: C:\Windows\TEMP\IE1AD8.tmp
03:29.962: INFO: Unable to remove directory C:\Windows\TEMP\IE1AD8.tmp, marking for deletion on reboot.
03:30.040: INFO: Released Internet Explorer Installer Mutex
00:00.000: ====================================================================
00:00.109: Started: 2015/04/08 (Y/M/D) 16:52:25.541 (local)
00:00.156: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds)
00:00.219: Command line: "C:\Windows\ccmcache\8\IE11-Windows6.1-x64-en-us.exe" /passive /quiet /norestart
00:00.328: INFO: Setup installer for Internet Explorer: 11.0.9600.16428
00:00.375: INFO: Previous version of Internet Explorer: 8.0.7601.18404
00:00.421: INFO: Checking if iexplore.exe's current version is between 11.0.9600.0...
00:00.484: INFO: ...and 11.1.0.0...
00:00.546: INFO: Maximum version on which to run IEAK branding is: 11.1.0.0...
00:00.640: INFO: iexplore.exe version check success. Install can proceed.
00:00.718: INFO: Operating System: Windows Workstation: 6.1.7601 (Service Pack 1)
00:00.796: INFO: Trying to extract ID: SetupDownloadList.txt (0) as "SetupDownloadList.txt"
00:00.874: INFO: Trying to extract ID: HardwareBlockingList.xml (0) as "HardwareBlockingList.xml"
00:00.936: INFO: Trying to extract ID: 7006 (0) as "IE11-neutral.Extracted.cab"
00:03.916: INFO: Trying to extract ID: 5501 (1033) as "Spelling_en.msu"
00:03.994: INFO: Extracted Spelling dictionary for en to C:\Windows\TEMP\IE1C0CE.tmp\Spelling_en.msu.
00:04.010: INFO: Trying to extract ID: 5502 (1033) as "Hyphenation_en.msu"
00:04.041: INFO: Extracted Hyphenation dictionary for en to C:\Windows\TEMP\IE1C0CE.tmp\Hyphenation_en.msu.
00:04.056: INFO: Trying to extract ID: 7128 (1033) as "IE11-support.cab"
00:04.883: INFO: PauseOrResumeAUThread: Successfully paused Automatic Updates.
00:06.272: INFO: Updated Download list, Hardware Blocking list, and no reboot policy files successfully downloaded and extracted for use.
00:06.412: INFO: Launched program to check hardware: "C:\Windows\TEMP\IE1C0CE.tmp\IE11-SUPPORT\IEXPLORE.EXE" /CheckHardware "C:\Windows\TEMP\IE1C0CE.tmp\IE11-support\HardwareBlockingList.xml"
00:07.052: INFO: Graphics Device Information: Intel(R) HD Graphics 4000
00:07.067: INFO: Hardware support check succeeded. Installation will continue.
00:07.083: INFO: Windows 7 operating system detected.
00:07.098: INFO: Service pack major: 1
00:07.114: INFO: Service pack minor: 0
00:07.145: INFO: Service pack name: Service Pack 1
00:07.176: INFO: Version Check for (KB2834140) of C:\Windows\System32\d3d11.dll: 6.2.9200.16570 >= 6.2.9200.16570 (True)
00:07.208: INFO: Version Check for (KB2670838) of C:\Windows\System32\api-ms-win-downlevel-user32-l1-1-0.dll: 6.2.9200.16492 >= 6.2.9200.16426 (True)
00:07.223: INFO: Version Check for (KB2639308) of C:\Windows\System32\Ntoskrnl.exe: 6.1.7601.18741 >= 6.1.7601.17727 (True)
00:07.254: INFO: Version Check for (KB2533623) of C:\Windows\System32\api-ms-win-security-base-l1-1-0.dll: 6.1.7601.18229 >= 6.1.7601.17617 (True)
00:07.301: INFO: Version Check for (KB2731771) of C:\Windows\System32\conhost.exe: 6.1.7601.18229 >= 6.1.7601.17888 (True)
00:07.317: INFO: Checking for correct version of C:\Windows\Fonts\segoeui.ttf.
00:07.332: INFO: Version Check for (KB2786081) of C:\Windows\System32\taskhost.exe: 6.1.7601.18010 >= 6.1.7601.18010 (True)
00:07.410: INFO: Version Check for (KB2888049) of C:\Windows\System32\drivers\tcpip.sys: 6.1.7601.18438 >= 6.1.7601.18254 (True)
00:07.473: INFO: Version Check for (KB2882822) of C:\Windows\System32\tdh.dll: 6.1.7601.18247 >= 6.1.7601.18247 (True)
00:30.140: INFO: Waiting for 0 prerequisite downloads.
00:32.277: INFO: The neutral pack was successfully downloaded from the internet. Installation will continue using the downloaded package.
00:32.339: INFO: Waiting for 0 language pack downloads.
00:32.355: INFO: Language pack downloads completed. (exit code = 0xffffffff (4294967295)).
00:32.417: INFO: No reboot logic message NrApiStart(0), lParam=0x00351188 returned 0x00000000.
00:33.119: INFO: No reboot logic message NrApiScan(1), lParam=0x00000001 returned 0x00000000.
00:33.197: INFO: No reboot logic message NrApiStartInstall(4), lParam=0x00000001 returned 0x00000014.
00:33.213: INFO: Installing with the downloaded package. C:\Windows\TEMP\IE1C0CE.tmp\IE11-neutral.Downloaded.cab
00:33.244: INFO: Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1C0CE.tmp\IE11-neutral.Downloaded.cab /quiet /norestart
00:52.370: INFO: Process exit code 0x00003715 (14101) [The identities of the manifests are identical but their contents are different. ]
00:52.401: ERROR: Neutral package installation failed (exit code = 0x00003715 (14101)).
00:52.417: INFO: No reboot logic message NrApiInstallDone(7), lParam=0x00009c59 returned 0x00000000.
00:52.463: INFO: No reboot logic message NrApiStartFinish(11), lParam=0x00000000 returned 0x00000000.
00:52.573: INFO: No reboot logic message NrApiFinish(12), lParam=0x00000000 returned 0x00000016.
00:52.744: INFO: Waiting for Active Setup to complete.
00:52.900: ERROR: Couldn't create setup troubleshooting shortcut on the desktop. HRESULT: 0x80070002,
00:53.009: INFO: PauseOrResumeAUThread: Successfully resumed Automatic Updates.
00:53.072: INFO: Setup exit code: 0x00009C59 (40025) - The neutral cab failed to install.
00:53.150: INFO: Cleaning up temporary files in: C:\Windows\TEMP\IE1C0CE.tmp
00:53.290: INFO: Unable to remove directory C:\Windows\TEMP\IE1C0CE.tmp, marking for deletion on reboot.
00:53.353: INFO: Released Internet Explorer Installer Mutex
00:00.000: ====================================================================
00:00.031: Started: 2015/04/08 (Y/M/D) 17:01:40.023 (local)
00:00.062: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds)
00:00.093: Command line: IE11-Windows6.1-x64-en-us.exe
00:00.109: INFO: Setup installer for Internet Explorer: 11.0.9600.16428
00:00.140: INFO: Previous version of Internet Explorer: 8.0.7601.18404
00:00.171: INFO: Checking if iexplore.exe's current version is between 11.0.9600.0...
00:00.218: INFO: ...and 11.1.0.0...
00:00.249: INFO: Maximum version on which to run IEAK branding is: 11.1.0.0...
00:00.280: INFO: iexplore.exe version check success. Install can proceed.
00:00.296: INFO: Operating System: Windows Workstation: 6.1.7601 (Service Pack 1)
00:00.312: INFO: Trying to extract ID: SetupDownloadList.txt (0) as "SetupDownloadList.txt"
00:00.343: INFO: Trying to extract ID: HardwareBlockingList.xml (0) as "HardwareBlockingList.xml"
00:00.358: INFO: Trying to extract ID: 7006 (0) as "IE11-neutral.Extracted.cab"
00:00.826: INFO: Trying to extract ID: 5501 (1033) as "Spelling_en.msu"
00:00.889: INFO: Extracted Spelling dictionary for en to C:\Windows\TEMP\IE1AF41.tmp\Spelling_en.msu.
00:00.951: INFO: Trying to extract ID: 5502 (1033) as "Hyphenation_en.msu"
00:00.982: INFO: Extracted Hyphenation dictionary for en to C:\Windows\TEMP\IE1AF41.tmp\Hyphenation_en.msu.
00:01.014: INFO: Trying to extract ID: 7128 (1033) as "IE11-support.cab"
00:02.199: INFO: PauseOrResumeAUThread: Successfully paused Automatic Updates.
00:03.837: INFO: Updated Download list, Hardware Blocking list, and no reboot policy files successfully downloaded and extracted for use.
00:04.258: INFO: Launched program to check hardware: "C:\Windows\TEMP\IE1AF41.tmp\IE11-SUPPORT\IEXPLORE.EXE" /CheckHardware "C:\Windows\TEMP\IE1AF41.tmp\IE11-support\HardwareBlockingList.xml"
00:05.335: INFO: Graphics Device Information: Intel(R) HD Graphics 4000
00:05.351: INFO: Hardware support check succeeded. Installation will continue.
00:05.382: INFO: Windows 7 operating system detected.
00:05.413: INFO: Service pack major: 1
00:05.475: INFO: Service pack minor: 0
00:05.507: INFO: Service pack name: Service Pack 1
00:05.663: INFO: Version Check for (KB2834140) of C:\Windows\System32\d3d11.dll: 6.2.9200.16570 >= 6.2.9200.16570 (True)
00:05.694: INFO: Version Check for (KB2670838) of C:\Windows\System32\api-ms-win-downlevel-user32-l1-1-0.dll: 6.2.9200.16492 >= 6.2.9200.16426 (True)
00:05.741: INFO: Version Check for (KB2639308) of C:\Windows\System32\Ntoskrnl.exe: 6.1.7601.18741 >= 6.1.7601.17727 (True)
00:05.803: INFO: Version Check for (KB2533623) of C:\Windows\System32\api-ms-win-security-base-l1-1-0.dll: 6.1.7601.18229 >= 6.1.7601.17617 (True)
00:05.850: INFO: Version Check for (KB2731771) of C:\Windows\System32\conhost.exe: 6.1.7601.18229 >= 6.1.7601.17888 (True)
00:05.865: INFO: Checking for correct version of C:\Windows\Fonts\segoeui.ttf.
00:05.897: INFO: Version Check for (KB2786081) of C:\Windows\System32\taskhost.exe: 6.1.7601.18010 >= 6.1.7601.18010 (True)
00:06.037: INFO: Version Check for (KB2888049) of C:\Windows\System32\drivers\tcpip.sys: 6.1.7601.18438 >= 6.1.7601.18254 (True)
00:06.146: INFO: Version Check for (KB2882822) of C:\Windows\System32\tdh.dll: 6.1.7601.18247 >= 6.1.7601.18247 (True)
00:31.699: INFO: Waiting for 0 prerequisite downloads.
02:45.501: INFO: The neutral pack was successfully downloaded from the internet. Installation will continue using the downloaded package.
02:45.548: INFO: Waiting for 0 language pack downloads.
02:45.579: INFO: Language pack downloads completed. (exit code = 0xffffffff (4294967295)).
02:45.642: INFO: No reboot logic message NrApiStart(0), lParam=0x003d2b10 returned 0x00000000.
02:46.921: INFO: No reboot logic message NrApiScan(1), lParam=0x80070005 returned 0x00000000.
02:46.999: INFO: No reboot logic message NrApiStartInstall(4), lParam=0x00000001 returned 0x00000014.
02:47.030: INFO: Installing with the downloaded package. C:\Windows\TEMP\IE1AF41.tmp\IE11-neutral.Downloaded.cab
02:47.061: INFO: Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1AF41.tmp\IE11-neutral.Downloaded.cab /quiet /norestart
03:06.842: INFO: Process exit code 0x00003715 (14101) [The identities of the manifests are identical but their contents are different. ]
03:06.858: ERROR: Neutral package installation failed (exit code = 0x00003715 (14101)).
03:06.889: INFO: No reboot logic message NrApiInstallDone(7), lParam=0x00009c59 returned 0x00000000.
03:07.092: INFO: No reboot logic message NrApiStartFinish(11), lParam=0x00000000 returned 0x00000000.
03:07.653: INFO: No reboot logic message NrApiFinish(12), lParam=0x00000000 returned 0x00000016.
03:07.778: INFO: Waiting for Active Setup to complete.
03:07.981: INFO: PauseOrResumeAUThread: Successfully resumed Automatic Updates.
03:14.705: INFO: Setup exit code: 0x00009C59 (40025) - The neutral cab failed to install.
03:14.767: INFO: Cleaning up temporary files in: C:\Windows\TEMP\IE1AF41.tmp
03:14.861: INFO: Unable to remove directory C:\Windows\TEMP\IE1AF41.tmp, marking for deletion on reboot.
03:14.923: INFO: Released Internet Explorer Installer MutexHi，
We hope your issue has been resolved, if you've found solution by yourself. We would appreciate it if you could share with us and we will mark it as answer.
I am looking to your log find that it's trying to launch DISM from c:\windows\SysNative. You might try build a symbolic link from c:\windows\system32 (where DISM lives) to the non-existent path c:\windows\SysNative. Then check the issue again.
To build a symbolic link, try workaround as Brian's reply to this thread.
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/i-get-error-9c59-when-updating-internet-explorer/03d4473a-867b-44a5-9a37-913e9a5879cf?page=8&msgId=afe85da0-36e0-4160-860b-d2973e78c8b9
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Reports6i - RWRUN60 command line exit codes - Help
Basically I'm running a process in C# that execute multiple reports through Process.Start() method, once completed I'm checking the Process.ExitCode to verify if it was a successful execution.
In the arguments for the command line execution I'm passing the ERRFILE=ErrorFile.txt argument to have an error log,.
Usually after a successful execution, by 'standard' (actually best practice I think), the exit code of an application is 0, but in some reports I'm having exit codes like 4, and no errors are logged in the ERRFILE.
I've checked the Reference Manual already, but I can't find any reference to command line error/exit level/code.
If somebody has the RWRUN60.exe process exit codes I'd appreciate it.
Thanks in advance.Please find the below code.
I am not sure whether it is useful to you.
DISPLAY=3.37.8.165:0.0;
export DISPLAY
#FTP ROUTINE
ftp_proc()
{ if test -f $output_file/$output_file_web
then
a=`wc -l $output_file/$output_file_web| cut -c1-8`
if [ $a = "" -o $a = "0" ]
then
echo 'FTP not required for $output_file_web because it has zero lines'
$sh_path/crt_arch.sh $output_file $output_file_web $arch_file m
else
echo "ftp $output_file_web File"
$sh_path/ftp_put_bin_script.sh centerpieceprod.motors.ge.com ftprpt test123 \
$output_file $output_file_web /u03/app/applmgr/homepage/reports \
$output_file_web $ftp_mode
$sh_path/crt_arch.sh $output_file $output_file_web $archive_path m
fi
else
echo 'WARNING : $output_file_unix file does not exist'
fi
unset a
## *** PROCESS STEP 010 ***
## Set environment, establish ID/password variables and process variables
echo 'STEP010 : Setup variables and environment\n'
echo 'STEP010 : Start Time - \c';date
#!/bin/ksh
#1###### Set the enviroment like APPS_SID, STEL_SID ##############
CONST_ENV=$1
. /var/opt/ge/bin/constell_environment $CONST_ENV
if [ $? -ne 0 ]
then
echo "Environment not set\n"
exit 1
fi
####### Set the oracle environment for constellar database like NLS_LANG
ORACLE_SID=$STEL_SID
. /opt/bin/SET_environment
####### Get DB user and Password ########
USER_PW=`/var/opt/ge/bin/GE_pw $STEL_SID $APPS_DB_USR`
if [ $? -ne 0 ]
then
echo "Failed to get constellar password - "
exit 1
fi
login=$STEL_DB_USR
passwd=$USER_PW
instance=$STEL_SID
PRINTER=ps264laser1
export PRINTER
connect_str=$login/$passwd
##----------## Establish environment variables
sh_path=$GESTEL_TOP/bin; export sh_path
plsql_path=$GESTEL_TOP/plsql; export plsql_path
tmp_path=$GESTEL_TOP/tmp; export tmp_path
output_file=$GESTEL_TOP/out; export output_path
input_path=$GESTEL_TOP/in; export input_path
log_path=$GESTEL_TOP/log; export log_path
archive_path=$GESTEL_TOP/archive; export archive_path
scr_path=$GESTEL_TOP; export scr_path
idw_name='REPORTS'; export idw_name;
DISPLAY=3.37.8.165:0.0; export DISPLAY
# <<<<<<<<<<<<<<<<<< M A I N P R O G R A M >>>>>>>>>>>>>>>>>>>>
echo "<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<"
date "+%D %T Begin of the REPORT process."
echo ">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>"
echo STARTING $0 `date +%c`
echo $connect_str
DAY=`date +%a`
echo day of week is $DAY
echo start batch jobs always executed
echo start MSCP$plant programs always executed
if [ $DAY = Sun -o $DAY = Mon ]
then
## Build temp table containing all purchase orders ##
sqlplus $connect_str @$plsql_path/exec_pop_tbl.sql
fi
# POPULATE THE IN SHIP TABLE AND THE OPEN PO TABLES
echo "Executing Interface for Reports data\n"
## Build temp table containing all purchase orders ##
sqlplus $connect_str @$plsql_path/create_open_po_report_tbl.sql
## Generate Receipt table for reports ##
echo "Executed Interface for pos Reports data\n"
sqlplus $connect_str @$plsql_path/crt_idw_rcpt.sql
## Look for any errors in HUB_SCHEDULE_TRACE table
sqlplus $connect_str @$plsql_path/test_error.sql $idw_name $tmp_path
unset a
a=`wc -l $tmp_path/test_error.spl | cut -c1-8`
if test $a != "0"
then
echo "\nERROR : Creating tables for reports\n"
sqlplus $connect_str @$plsql_path/send_mail_msg.sql
sqlplus $connect_str @$plsql_path/send_prod_support_mail.sql \
$inf_rado $tmp_path
exit 100
fi
echo '123'
# FOR EACH PLANT IN THE TABLE,GET PLANT CODE
echo '124'
######## Get password for apps ##########
ORACLE_SID=$STEL_SID
. /opt/bin/SET_environment
unset TNS_ADMIN
USER_PW=`/var/opt/ge/bin/GE_pw $STEL_SID $STEL_APP_USR`
if [ $? -ne 0 ]
then
echo "Failed to get Apps password - "
exit 1
fi
apps_conn=$STEL_APP_USR/$USER_PW
echo '\nApps connected '
echo $login
echo $passwd
for x in `sqlplus -s $apps_conn <<-MMM
set pages 0
set feedback 0
SELECT
TRANSLATE(RPAD(PARAM_VALUE,3),' ','x')||param_desc CODE
FROM GECV_INT_PARAMS
where interface_code = 'DLY_REPORTS'
and param_code = 'Plant code and printer'
EXIT
MMM
`
do
plant1=`echo $x | awk '{print substr($0,3,1)}'`
echo $plant1
if [ "$plant1" = "x" ]
then
plant=`echo $x | awk '{print substr($0,1,2)}'`
else
plant=`echo $x | awk '{print substr($0,1,3)}'`
fi
echo $plant
box=`echo $x | awk '{print substr($0,4,length($0))}'`
echo $box
DAY=`date +%a`
echo day of week is $DAY
echo 'Start Time - \c';date
echo start MSCP$plant programs executed on sunday or monday
#DAILY RECEIVING FOR EACH PLANT
echo $output_file
#echo ' The Printer Name is : '
#echo $PRINTER
ORACLE_HOME=/u04/app/applmgr/DFWPR107ora/8.0.6
rwrun60c report=$sh_path/rcvd1.rdf userid=$login/$passwd@$instance \
destype=file desname=$output_file/$plant'rcvd1.txt' batch=yes ctrplt=$plant \
pagesize=132x66 desformat=wide180
output_file_unix=$plant'rcvd1.txt'
output_file_web='rcvd1'$plant'.doc'
# Verify the day of the week to do put or append
if [ $DAY = Sun -o $DAY = Mon ]
then
ftp_mode=append
else
ftp_mode=put
fi
$sh_path/report_ascii_to_rtf.sh $output_file_unix $output_file_web
ftp_proc
#PLANT CODE PHL THEN RUN DIFF REPORTS
if [ $plant = PHL ]
then
REP_POPLT=phl_poplt.rdf
REP_POPD=phl_popd.rdf
REP_POANA1=phl_poana1.rdf
REP_POANA2=phl_poana2.rdf
else
REP_POPLT=poplt.rdf
REP_POPD=popd.rdf
REP_POANA1=poana1.rdf
REP_POANA2=poana2.rdf
fi
echo $REP_POPLT
#OPEN PURCHASE ORDERS
ORACLE_HOME=/u04/app/applmgr/DFWPR107ora/8.0.6
rwrun60c report=$sh_path/$REP_POPLT userid=$login/$passwd@$instance \
destype=file desname=$output_file/$plant'poplt.txt' batch=yes ctrplt=$plant \
pagesize=132x66 desformat=wide180
output_file_unix=$plant'poplt.txt'
output_file_web='poplt'$plant'.doc'
ftp_mode=put
$sh_path/report_ascii_to_rtf.sh $output_file_unix $output_file_web
ftp_proc
#PAST DUE PURCHASE ORDERS
ORACLE_HOME=/u04/app/applmgr/DFWPR107ora/8.0.6
rwrun60c report=$sh_path/$REP_POPD userid=$login/$passwd@$instance \
destype=file desname=$output_file/$plant'popd.txt' batch=yes ctrplt=$plant \
pagesize=132x66 desformat=wide180
output_file_unix=$plant'popd.txt'
output_file_web='popd'$plant'.doc'
ftp_mode=put
$sh_path/report_ascii_to_rtf.sh $output_file_unix $output_file_web
ftp_proc
#PURCHASE ORDERS BY ANALYST
ORACLE_HOME=/u04/app/applmgr/DFWPR107ora/8.0.6
rwrun60c report=$sh_path/$REP_POANA1 userid=$login/$passwd@$instance \
destype=file desname=$output_file/$plant'poana1.txt' batch=yes ctrplt=$plant \
pagesize=132x66 desformat=wide180
output_file_unix=$plant'poana1.txt'
output_file_web='poana1'$plant'.doc'
ftp_mode=put
$sh_path/report_ascii_to_rtf.sh $output_file_unix $output_file_web
ftp_proc
# PURCHASE ORDER BY PART
# skl.run model for oracle reports executables
ORACLE_HOME=/u04/app/applmgr/DFWPR107ora/8.0.6
rwrun60c report=$sh_path/$REP_POANA2 userid=$login/$passwd@$instance \
destype=file desname=$output_file/$plant'poana2.txt' batch=yes ctrplt=$plant \
pagesize=132x66 desformat=wide180
output_file_unix=$plant'poana2.txt'
output_file_web='poana2'$plant'.doc'
ftp_mode=put
$sh_path/report_ascii_to_rtf.sh $output_file_unix $output_file_web
ftp_proc
echo start MSCP$plant programs always executed
if [ $DAY = Sun -o $DAY = Mon ]
then
## Build temp table containing all purchase orders ##
# skl.run model for oracle reports executables
# RECEIVING LOG BY WEEK
ORACLE_HOME=/u04/app/applmgr/DFWPR107ora/8.0.6
rwrun60c report=$sh_path/rcvw1.rdf userid=$login/$passwd@$instance \
destype=file desname=$output_file/$plant'rcvw1.txt' batch=yes ctrplt=$plant \
pagesize=132x66 desformat=wide180
output_file_unix=$plant'rcvw1.txt'
output_file_web='rcvw1'$plant'.doc'
ftp_mode=put
$sh_path/report_ascii_to_rtf.sh $output_file_unix $output_file_web
ftp_proc
# RECEIVING LOG BY ACCOUNT
ORACLE_HOME=/u04/app/applmgr/DFWPR107ora/8.0.6
rwrun60c report=$sh_path/wacsum.rdf userid=$login/$passwd@$instance \
destype=file desname=$output_file/$plant'wacsum.txt' batch=yes ctrplt=$plant \
pagesize=132x66 desformat=wide180
output_file_unix=$plant'wacsum.txt'
output_file_web='wacsum'$plant'.doc'
ftp_mode=put
$sh_path/report_ascii_to_rtf.sh $output_file_unix $output_file_web
ftp_proc
# COMMITTED DOLLAR DETAIL REPORT
ORACLE_HOME=/u04/app/applmgr/DFWPR107ora/8.0.6
rwrun60c report=$sh_path/cmtdet.rdf userid=$login/$passwd@$instance \
destype=file desname=$output_file/$plant'cmtdet.txt' batch=yes ctrplt=$plant \
pagesize=132x66 desformat=wide180
output_file_unix=$plant'cmtdet.txt'
output_file_web='cmtdet'$plant'.doc'
ftp_mode=put
$sh_path/report_ascii_to_rtf.sh $output_file_unix $output_file_web
ftp_proc
# COMMITTED DOLLAR SUMMARY REPORT
ORACLE_HOME=/u04/app/applmgr/DFWPR107ora/8.0.6
rwrun60c report=$sh_path/cmtsum.rdf userid=$login/$passwd@$instance \
destype=file desname=$output_file/$plant'cmtsum.txt' batch=yes ctrplt=$plant \
pagesize=132x66 desformat=wide180
output_file_unix=$plant'cmtsum.txt'
output_file_web='cmtsum'$plant'.doc'
ftp_mode=put
$sh_path/report_ascii_to_rtf.sh $output_file_unix $output_file_web
ftp_proc
fi
done
echo end MSCP$plant programs always executed -
IE 11 Neutral package installation failed (exit code = 0x800f081e (2148468766)).
Hi,
We are upgrading to IE11 on Windows 7 SP1(IE 8 or IE 9 installed.)Many of the machine am getting below error.
Please help me to resolve the issue asap.
00:53.180: INFO: Installing with the extracted package. C:\Windows\TEMP\IE1C3EE.tmp\IE11-neutral.Extracted.cab
00:53.212: INFO: Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1C3EE.tmp\IE11-neutral.Extracted.cab /quiet /norestart
00:55.489: INFO: Process 'C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1C3EE.tmp\IE11-neutral.Extracted.cab /quiet /norestart' exited with exit code 0x800F081E (-2146498530)
00:55.521: ERROR: Neutral package installation failed (exit code = 0x800f081e (2148468766)).
00:55.552: INFO: No reboot logic message NrApiInstallDone(7), lParam=0x00009c59 returned 0x00000000.
00:55.583: INFO: No reboot logic message NrApiStartFinish(11), lParam=0x00000000 returned 0x00000000.
00:55.614: INFO: No reboot logic message NrApiFinish(12), lParam=0x00000000 returned 0x00000016.
00:55.661: ERROR: Couldn't create setup troubleshooting shortcut on the desktop. HRESULT: 0x80070002,
00:55.708: INFO: Setup exit code: 0x00009C59 (40025) - The neutral cab failed to install.
01:00.793: ERROR: SQM Upload failed while uploading "C:\Windows\system32\config\systemprofile\AppData\Local\Microsoft\Windows\Temporary Internet Files\SQM\iesqmdata_setup0.sqm" with error: 2147500036
01:00.887: INFO: Cleaning up temporary files in: C:\Windows\TEMP\IE1C3EE.tmp
01:00.934: INFO: Unable to remove directory C:\Windows\TEMP\IE1C3EE.tmp, marking for deletion on reboot.
01:01.027: INFO: Released Internet Explorer Installer Mutex
00:00.000: ====================================================================
00:00.187: Started: 2013/11/27 (Y/M/D) 13:38:03.009 (local)
00:00.296: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds)
00:00.358: Command line: "C:\Windows\SoftwareDistribution\Download\Install\IE11-Windows6.1-x64-en-us.exe" /WSUS
00:00.452: INFO: Setup installer for Internet Explorer: 11.0.9600.16428
00:00.514: INFO: Previous version of Internet Explorer: 9.0.8112.16520
00:00.561: INFO: Checking if iexplore.exe's current version is between 11.0.9600.0...
00:00.624: INFO: ...and 11.1.0.0...
00:00.702: INFO: Maximum version on which to run IEAK branding is: 11.1.0.0...
00:00.795: INFO: iexplore.exe version check success. Install can proceed.
00:00.873: INFO: Operating System: Windows Workstation: 6.1.7601 (Service Pack 1)
00:00.936: INFO: Trying to extract ID: SetupDownloadList.txt (0) as "SetupDownloadList.txt"
00:01.014: INFO: Trying to extract ID: HardwareBlockingList.xml (0) as "HardwareBlockingList.xml"
00:01.185: INFO: Trying to extract ID: 7006 (0) as "IE11-neutral.Extracted.cab"
00:07.254: INFO: Trying to extract ID: 5501 (1033) as "Spelling_en.msu"
00:07.394: INFO: Extracted Spelling dictionary for en to C:\Windows\TEMP\IE17800.tmp\Spelling_en.msu.
00:07.519: INFO: Trying to extract ID: 5502 (1033) as "Hyphenation_en.msu"
00:07.597: INFO: Extracted Hyphenation dictionary for en to C:\Windows\TEMP\IE17800.tmp\Hyphenation_en.msu.
00:07.691: INFO: Trying to extract ID: 7128 (1033) as "IE11-support.cab"
00:09.126: INFO: Launched program to check hardware: "C:\Windows\TEMP\IE17800.tmp\IE11-SUPPORT\IEXPLORE.EXE" /CheckHardware "C:\Windows\TEMP\IE17800.tmp\HardwareBlockingList.xml"
00:09.906: INFO: Hardware support check succeeded. Installation will continue.
00:10.015: INFO: Windows 7 operating system detected.
00:10.077: INFO: Service pack major: 1
00:10.155: INFO: Service pack minor: 0
00:10.233: INFO: Service pack name: Service Pack 1
00:10.343: INFO: Version Check for (KB2834140) of C:\Windows\System32\d3d11.dll: 6.1.7601.17514 >= 6.2.9200.16570 (False)
00:10.436: INFO: Version Check for (KB2670838) of C:\Windows\System32\api-ms-win-downlevel-user32-l1-1-0.dll: 6.2.9200.16492 >= 6.2.9200.16426 (True)
00:10.545: INFO: Version Check for (KB2639308) of C:\Windows\System32\Ntoskrnl.exe: 6.1.7601.18247 >= 6.1.7601.17727 (True)
00:10.670: INFO: Version Check for (KB2533623) of C:\Windows\System32\api-ms-win-security-base-l1-1-0.dll: 6.1.7601.18229 >= 6.1.7601.17617 (True)
00:10.764: INFO: Version Check for (KB2731771) of C:\Windows\System32\conhost.exe: 6.1.7601.18229 >= 6.1.7601.17888 (True)
00:10.857: INFO: Checking for correct version of C:\Windows\Fonts\segoeui.ttf.
00:10.920: INFO: Version Check for (KB2786081) of C:\Windows\System32\taskhost.exe: 6.1.7601.18010 >= 6.1.7601.18010 (True)
00:11.045: INFO: Version Check for (KB2888049) of C:\Windows\System32\drivers\tcpip.sys: 6.1.7601.18254 >= 6.1.7601.18254 (True)
00:11.201: INFO: Version Check for (KB2882822) of C:\Windows\System32\tdh.dll: 6.1.7601.18247 >= 6.1.7601.18247 (True)
00:14.539: INFO: IE Setup prerequisite package for KB2834140 included: C:\Windows\TEMP\IE17800.tmp\KB2834140_amd64.cab
00:14.648: INFO: IE Setup prerequisite package for KB2834140 included: C:\Windows\TEMP\IE17800.tmp\KB2834140_amd64.cab
00:14.679: INFO: A local copy of the KB2834140 installation package has been copied to KB2834140_amd64.MSU.
00:14.742: INFO: IE Setup Language pack included: C:\Windows\TEMP\IE17800.tmp\IE-Spelling-en.cab
00:14.820: INFO: IE Setup Language pack included: C:\Windows\TEMP\IE17800.tmp\IE-Hyphenation-en.cab
00:14.898: INFO: Waiting for 1 prerequisite downloads.
00:14.976: INFO: Prerequisite download processes have completed. Starting Installation of 1 prerequisites.
00:15.163: INFO: Launched package installation: C:\Windows\SysNative\dism.exe /online /add-pHi,
As per log all update installed fine and find the below log file..We are deploying IE package via SCCM deployment tool.We are not using any WSUS server.Downloaded setup.exe from Microsoft website and installing silently IE11-Windows6.1-x64-en-us.exe /passive
/quiet /norestart
00:50.139: INFO: Download for KB2834140 initiated. Downloading http://go.microsoft.com/fwlink/?LinkID=303935 -> KB2834140_amd64.MSU.
00:50.170: INFO: Download for KB2729094 initiated. Downloading http://go.microsoft.com/fwlink/?LinkID=258385 -> KB2729094_amd64.MSU.
00:50.217: INFO: Waiting for 2 prerequisite downloads.
01:05.567: INFO: Prerequisite download processes have completed. Starting Installation of 2 prerequisites.
01:05.770: INFO: Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE17C40.tmp\KB2834140\Windows6.1-KB2834140-v2-x64.cab /quiet /norestart
01:50.308: INFO: Process exit code 0x00000000 (0) [The operation completed successfully. ]
01:50.823: INFO: Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE17C40.tmp\KB2729094\Windows6.1-KB2729094-v2-x64.cab /quiet /norestart
02:57.685: INFO: Process exit code 0x00000000 (0) [The operation completed successfully. ]
03:33.628: INFO: The neutral pack was successfully downloaded from the internet. Installation will continue using the downloaded package.
03:33.706: INFO: Waiting for 0 language pack downloads.
03:33.721: INFO: Language pack downloads completed. (exit code = 0xffffffff (4294967295)).
03:33.799: INFO: No reboot logic message NrApiStart(0), lParam=0x00362bc0 returned 0x00000000.
03:35.734: INFO: No reboot logic message NrApiScan(1), lParam=0x00000001 returned 0x00000000.
03:35.812: INFO: No reboot logic message NrApiStartInstall(4), lParam=0x00000001 returned 0x00000014.
03:35.827: INFO: Installing with the downloaded package. C:\Windows\TEMP\IE17C40.tmp\IE11-neutral.Downloaded.cab
03:35.952: INFO: Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE17C40.tmp\IE11-neutral.Downloaded.cab /quiet /norestart
04:03.845: INFO: Process 'C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE17C40.tmp\IE11-neutral.Downloaded.cab /quiet /norestart' exited with exit code 0x800F081E (-2146498530)
04:04.251: ERROR: Neutral package installation failed (exit code = 0x800f081e (2148468766)).
04:04.313: INFO: No reboot logic message NrApiInstallDone(7), lParam=0x00009c59 returned 0x00000000.
04:04.391: INFO: No reboot logic message NrApiStartFinish(11), lParam=0x00000000 returned 0x00000000.
04:04.563: INFO: No reboot logic message NrApiFinish(12), lParam=0x00000000 returned 0x00000016.
04:04.656: INFO: Waiting for Active Setup to complete.
04:04.734: ERROR: Couldn't create setup troubleshooting shortcut on the desktop. HRESULT: 0x80070002,
04:04.797: INFO: PauseOrResumeAUThread: Successfully resumed Automatic Updates.
04:04.875: INFO: Setup exit code: 0x00009C59 (40025) - The neutral cab failed to install.
04:05.327: INFO: Scheduling upload to IE SQM server: http://sqm.microsoft.com/sqm/ie/sqmserver.dll
04:10.428: ERROR: SQM Upload failed while uploading "C:\Windows\system32\config\systemprofile\AppData\Local\Microsoft\Windows\Temporary Internet Files\SQM\iesqmdata_setup0.sqm" with error: 2147500036
04:10.569: ERROR: SQM Upload failed while uploading "C:\Windows\system32\config\systemprofile\AppData\Local\Microsoft\Windows\Temporary Internet Files\SQM\iesqmdata_setup1.sqm" with error: 2147500036
04:10.662: ERROR: SQM Upload failed while uploading "C:\Windows\system32\config\systemprofile\AppData\Local\Microsoft\Windows\Temporary Internet Files\SQM\iesqmdata_setup2.sqm" with error: 2147500036
04:10.787: ERROR: SQM Upload failed while uploading "C:\Windows\system32\config\systemprofile\AppData\Local\Microsoft\Windows\Temporary Internet Files\SQM\iesqmdata_setup3.sqm" with error: 2147500036
04:10.850: ERROR: SQM Upload failed while uploading "C:\Windows\system32\config\systemprofile\AppData\Local\Microsoft\Windows\Temporary Internet Files\SQM\iesqmdata_setup4.sqm" with error: 2147500036
04:10.943: ERROR: SQM Upload failed while uploading "C:\Windows\system32\config\systemprofile\AppData\Local\Microsoft\Windows\Temporary Internet Files\SQM\iesqmdata_setup5.sqm" with error: 2147500036
04:11.021: ERROR: SQM Upload failed while uploading "C:\Windows\system32\config\systemprofile\AppData\Local\Microsoft\Windows\Temporary Internet Files\SQM\iesqmdata_setup6.sqm" with error: 2147500036
04:11.099: ERROR: SQM Upload failed while uploading "C:\Windows\system32\config\systemprofile\AppData\Local\Microsoft\Windows\Temporary Internet Files\SQM\iesqmdata_setup7.sqm" with error: 2147500036
04:11.177: ERROR: SQM Upload failed while uploading "C:\Windows\system32\config\systemprofile\AppData\Local\Microsoft\Windows\Temporary Internet Files\SQM\iesqmdata_setup8.sqm" with error: 2147500036
04:11.318: ERROR: SQM Upload failed while uploading "C:\Windows\system32\config\systemprofile\AppData\Local\Microsoft\Windows\Temporary Internet Files\SQM\iesqmdata_setup9.sqm" with error: 2147500036
04:11.427: INFO: Cleaning up temporary files in: C:\Windows\TEMP\IE17C40.tmp
04:12.145: INFO: Unable to remove directory C:\Windows\TEMP\IE17C40.tmp, marking for deletion on reboot.
04:12.410: INFO: Released Internet Explorer Installer Mutex -
JVM terminated exit code = ...
When using wsad 5, and trying to start the server I obtain an error :
JVM terminated exit code = -1073741819 E:\...\javaw.exe
-cp E:\...\startup.jar org.eclipse.core.launcher.Main
-oswin32
-wswin32
-arch x86
-showsplash e:\...\eclipse.exe
-showsplash 600 de programa\wsad\.\eclipse\eclipse.exe
-data E:\...\workspace
where can I find the meaning of JVM exit codes? or Does anybody knows what does this one means?
thanksYou might need to run Eclipse properly
All arguments following (but not including) the -vmargs entry are passed directly through to the indicated Java VM as virtual machine arguments (that is, before the class to run). Note: If an Eclipse startup argument, such as -data, is provided after the Java vm arguments (-vmargs), Eclipse will not start and you will receive a "JVM terminated. Exit code=1" error.
Running on Different VMs
Running Eclipse on J9
When running Eclipse on J9 version 1.5, it is recommended that you use the following VM options:
eclipse.exe [eclipse arguments] -vm path_to_j9w.exe
-vmargs -ms:32 -mm:2048 -mo:32768 -moi:32768 -mca:32 -mco:128 -mx:2000000
When running Eclipse on J9 version 2.0, the default arguments chosen by J9W should be suitable. However, to override the parameters which are automatically set internally by the Eclipse executable, you must specify -vmargs with no following arguments as follows:
eclipse.exe [eclipse arguments] -vm path_to_j9w.exe -vmargs
Please refer to the J9 VM documentation and help for further information.
Running Eclipse on the IBM Developer Kit, Java(TM) Technology Edition VM
The default VM settings for IBM Developer Kit, Java(TM) Technology Edition 1.3 Linux work well for initial exploration, but are not sufficient for large scale development. For large scale development you should modify your VM arguments to make more heap available. For example, the following setting will allow the Java heap to grow to 256MB:
-vmargs -Xmx256M
for more details
http://dev.eclipse.org/viewcvs/index.cgi/~checkout~/org.eclipse.platform.doc.user/tasks/running_eclipse.htm
Maybe you are looking for
-
GOODS RECEPT-(MIGO-PO NO.KNOWN)
HY GUYS, I'M GETTING THE FOLLOWING PROBLEM..... I Created a PO....But when I'm trying to post Goods Receipt( MIGO-PO NO.KNOW)...system issuing a message that PO has no items but when I'm displaying my PO,,its showing me all things...if my PO is not r
-
Problems with Photoshop elements 9
I'm using elements 9. Problem is that sometimes Elements 9 freeze completely. I can open a new blanc document but the only thing that is working is the Hand Tool. I tried following : close Elements 9 and re-open : not working shut down pc and restar
-
Unable to fix a nuked Blackberry
Hi All, I am new here, but have searched the web for a solution to this problem. I have a BlackBerry Curve 8520 which won't turn on and just has the red led light flashing sequence. I have looked at various different posts on how to restore a "nuked"
-
how do i keep the original manual sort of my photos that i had in previous library after a rebuild in iphoto library manager? and keep the events in the same order with blank events also
-
Hi All, Is it possible to use table name or alias to qualify column name when using Natural Join / Join.....Using As far as I know we cannot do it. So is the following statement syntatically correct: SELECT e.last_name, l.location_id FROM employees e