Thread : select switchover_status from v$database
hi there,
I am not able to change my primary database switchover to standby. As before i did some r.n.d while running below command on primary db: "alter database commit to switchover to physical with session shutdown" then i checked status
"select switchover_status from v$database";
sql>SWITCHOVER_STATUS
TO PRIMARY
after that i run this command to switch again to standby db:
sql> alter database commit to switchover to standby with session shutdown;
Database altered.
but still showing same status:
SQL> select switchover_status from v$database;
SWITCHOVER_STATUS
TO PRIMARY
how do i make my primary db on switchover_status to standby .any solution would be graceful.
thanks
bingo!!
i create backup of controlfile:
sql>alter database backup controlfile to trace as '/Pgh/controlfile.sql';
and take my primary db to nomount stage run the script:
startup nomount;
sql@Pgh/controlfile.sql';
database mount;
alter database open resetlogs;
then i checked switchover_status
select switchover_status from v$database;
SWITCHOVER_STATUS
to standby
Similar Messages
-
How to get the selection parameters from logical database into one of the t
Hi Sap ABAP Champians,
How to get the selection parameters from logical database into one of the tab in the tabstrip selection-screen.
Please help me for this
Thanks
BasuHi
Thanks, that will work, but then I'll have to insert code into all my reports.
I can see that "Application Server Control Console" is able to rerun a report.
This must mean that the Report Server has access to the runtime parameters.
But how?
Cheers
Nils Peter -
Select data from different database
hi,
may I know how to select data from different database?
for example,
I've 2 databases, OracleDB and OracleAR
Connect with OracleAR in SQL*Plus
select * from OracleDB.TableName
does Oracle support this kind of query?
how can I retrieve data from other database while im connecting with
other database?Hi,
Yes, it's possible. No, your syntax won't work.
First of all you have to define a DATABASE LINK inside the DB where you are already connected (in this case OracleAR). Read docs how to do that.
Second thing is the query. It will look like
SELECT * from TableName@<NameOfDatabaseLink>Greetings,
Guido -
Select records from one database and insert it into another database
Hi
I need to write a statement to select records from one database which is on machine 1 and insert these records on a table in another database which is on machine 2. Following is what I did:
1. I created the following script on machine 2
sqlplus remedy_intf/test@sptd @load_hrdata.sql
2. I created the following sql statements in file called load_hrdata.sql:
rem This script will perform the following steps
rem 1. Delete previous HR data/table to start w/ clean import tables
rem 2. Create database link to HR database, and
rem 3. Create User Data import table taking info from HR
rem 4. Drop HRP link before exiting
SET COPYCOMMIT 100
delete from remedy.remedy_feed;
commit;
COPY FROM nav/donnelley@hrp -
INSERT INTO remedy.remedy_feed -
(EMPLID, FIRST_NAME, MI, LAST_NAME, BUSINESS_TITLE, WORK_PHONE, -
RRD_INTRNT_EMAIL, LOCATION, RRD_OFFICE_MAIL, RRD_BUS_UNIT_DESCR) -
USING SELECT EMPLID, FIRST_NAME, MI, LAST_NAME, BUSINESS_TITLE, WORK_PHONE, -
RRD_INTRNT_EMAIL, LOCATION, RRD_OFFICE_MAIL, RRD_BUS_UNIT_DESCR -
FROM ps_rrd_intf_medium -
where empl_status IN ('A', 'L', 'P', 'S', 'X')
COMMIT;
EXIT;
However, whenever I run the statement I keep getting the following error:
SP2-0498: missing parenthetical column list or USING keyword
Do you have any suggestions on how I can fix this or what am I doing wrong?
Thanks
AliThis doesn't seem to relate to Adobe Reader. Please let us know the product you are using so we may redirect you or refer to the list of forums at http://forums.adobe.com/
-
Select data from another database
Hi,
Is it possible to retrieve data from a table from another database?
For instance, I have two databases db_1 and db_2
I login to the database db_1 using
sqlplus username/psw@db1
and to the database db_2 using
sqlplus username/psw@db2
In SQL> db1 I would like to use select statement from a table in the db2. Is it possible?
Another question:
I have two tablespaces TP1 and TP2 in the database db1
The TP1 is my default tablespace.
Can I switch from TP1 to TP2 tablespace in the sqlplus?
If not, how can I select all tables obtained in the TP2? Or how can I select data from a table in the TP2?
ThanksI don't know how to create a db link.<br>
SQL Reference Guide - CREATE DATABASE LINK<br>
There are some examples in the doc above.<br>
<br>
What about if db1 and db2 have the same table name?<br>No problem, exactly like when you have two same table name accross two schemas on same database. The table suffixed by the dblink name come from the other schema of other database (schema which you use to connect through the dblink to the other database).<br>
<br>
Nicolas. -
SELECT data from two databases
I have two databases that I need to select data from in a
single SELECT. Using DWs Advanced window for creating the select I
don't see any way to select more than 1 Connection. Both databases
have unique user and passwords but reside on the same server. Any
idea how I can write a single SELECT to get data from both dbs. I
assumed it would be similar to selecting data from multiple tables
within the same db but the connection part is stumping me. Any
ideas would be greatly appreciated.TouchstonePress wrote:
> Page 48, Developing a Web Database Application . . .
speaks about making a
> database with two related TABLES each with the same
PRIMARY KEY column with
> which to identify a customer using their unique number.
That's the basic technique for joining two tables in the same
database.
The original poster has tables in different databases that
have
different user accounts and passwords.
Although it's possible to join two databases, you cannot do
it unless
you have one user account with the same privileges on both
databases.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/ -
SELECT query from multiple databases
Hi,
Is it possible to run a SELECT query using multiple DBs' tables, like outer joining them. One of the DBs is Sybase.
Thanks in advanceA TopLink session can span multiple databases if they can be accessed through a single connection. A single select would require the database to handle the aggregation as mentioned in the other post.
Alternatively TopLink's session broker will support making a single session present persistent types from multiple independent databases. This approach will not support a single SELECT spanning the databases though.
Doug -
Select table from another database
Hello
Consider 2 oracle databases: A and B.
How can i create a table in database A receiving records through a select statement to a table Z in database B?
Is this possible?
I thank in advance all your replies!You need to create a database link on table A which points to the correct schema on table B.
Note that there needs to be an entry in the tnsnames.ora file (assuming you're using local naming) on server A which points to the database on Server B.
Then you just reference the table via the database link.
eg select * from dual@TNSB would access the dual table on server B.
(assuming TNSB is the database link name)
If you use v$instance rather than dual (and have appropriate privileges) you will see the servername of server b rather than server a.
Edited by: Keith Jamieson on Oct 1, 2008 3:13 PM -
How to get dynamic select options from logical database?
Hi,
in one of my extended reports (means - overwritten standard SAP functionality in Z-namespace) I'm using LDB 'DDF'. I've been requested to validate some of the dynamic selection options (for example - field HKONT at Document level) and to split the logic depending on the particular value(s).
Tracking what is happened in the LDB program I found that this select option is added as dynamic WHERE clause to the SELECT statement - in a way:
WHERE bukrs = p_burks AND ... AND
(where_tab)
Is there a way to get values of these LDB dynamic select options into my report and if yes - how?
Thanks in advance.
Regards,
Ivaylo Mutafchiev
Senior SAP Abap ConsultantHi,
Try to use the following fm in your report and check
call function 'RS_REFRESH_FROM_DYNAMICAL_SEL'
exporting
curr_report = sy-cprog
mode_write_or_move = 'M'
importing
p_trange = gt_dyn_trange
exceptions
not_found = 1
wrong_type = 2
others = 3.
PS please make a whereused of this fm , how it has been used in LDB's to get dynmic selection values
a® -
Switchover_status in standby database showing NOT ALLOWED
Hi All,
My oracle database version is Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit on windows platform.
I need to perform switchover activity with dg_broker=TRUE.
When I checked the status of DR database I found that switchover_status is NOT ALLOWED rather than SESSION ACTIVE or TO PRIMARY.I have doubt whether switchover can be done successfully or not with this configuration?
*Parameters from spfile in production database
=======================================
maxprod.__db_cache_size=2046820352
maxprod.__java_pool_size=16777216
maxprod.__large_pool_size=16777216
maxprod.__shared_pool_size=352321536
maxprod.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\maxprod\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\maxprod\bdump'
*.compatible='10.2.0.1.0'
*.control_files='D:\MaximoData\oradata\maxprod\CONTROL01.CTL','D:\MaximoData\oradata\maxprod\CONTROL02.CTL','D:\MaximoData\oradata\maxprod\CONTROL03.CTL'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\maxprod\cdump'
*.cursor_sharing='EXACT'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='maxprod'
*.db_recovery_file_dest='D:\MaximoData\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dg_broker_start=TRUE
*.dispatchers='(PROTOCOL=TCP) (SERVICE=maxprodXDB)'
*.fal_client='MAXPROD'
*.fal_server='EAMDR'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(MAXPROD,EAMDR)'
*.log_archive_dest_1='location=D:\MaximoData\Archive_Log valid_for=(all_logfiles,all_roles)'
*.log_archive_dest_2='SERVICE=EAMDR VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) db_unique_name=EAMDR'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_archive_start=true
*.log_buffer=100000000
*.nls_language='AMERICAN'
*.open_cursors=8000
*.pga_aggregate_target=848297984
*.processes=300
*.remote_login_passwordfile='EXCLUSIVE'
*.session_cached_cursors=20
*.sga_max_size=4294967296
*.sga_target=2550136832
*.sql92_security=TRUE
*.standby_archive_dest='D:\MaximoData\Archive_Log\standby'
*.standby_file_management='auto'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\maxprod\udump'*
*Parameters from spfile in DR database
============================
maxprod.__db_cache_size=3187671040
eamdr.__db_cache_size=1073741824
maxprod.__java_pool_size=16777216
eamdr.__java_pool_size=16777216
maxprod.__large_pool_size=16777216
eamdr.__large_pool_size=16777216
maxprod.__shared_pool_size=1056964608
eamdr.__shared_pool_size=486539264
maxprod.__streams_pool_size=0
eamdr.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\EAMDR\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\EAMDR\bdump'
*.compatible='10.2.0.1.0'
*.control_files='D:\MAXIMODATA\ORADATA\MAXPROD\CONTROL01.CTL','D:\MAXIMODATA\ORADATA\MAXPROD\CONTROL02.CTL','D:\MAXIMODATA\ORADATA\MAXPROD\CONTROL03.CTL'#Restore Controlfile
*.core_dump_dest='C:\oracle\product\10.2.0\admin\EAMDR\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='maxprod'
*.db_recovery_file_dest_size=10737418240
*.db_recovery_file_dest='D:\MaximoData\flash_recovery_area'
*.DB_UNIQUE_NAME='EAMDR'
*.dg_broker_start=TRUE
*.dispatchers='(PROTOCOL=TCP) (SERVICE=maxprodXDB)'
*.fal_client='EAMDR'
*.fal_server='MAXPROD'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(MAXPROD,EAMDR)'
*.log_archive_dest_1='LOCATION=D:\MaximoData\Archive_Log VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=EAMDR'
*.log_archive_dest_2='service=maxprod valid_for=(online_logfiles,primary_role) db_unique_name=MAXPROD'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.nls_language='AMERICAN'
*.open_cursors=8000
*.pga_aggregate_target=194967296
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_max_size=4294967296
*.sga_target=1594967296
*.standby_archive_dest='D:\MaximoData\Archive_Log\standby'
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\EAMDR\udump'*
I didn't find any DG_BROKER_CONFIG_FILE1, DG_BROKER_CONFIG_FILE2 parameters from spfile in both production and DR db?
Is anything missing in spfile?
When I am trying to connect with dgmgrl
DGMGRL>connect sys;
connected
DGMGRL>show configuration;
Error: ORA-16532: Data Guard broker configuration does not exist
what does it mean when dgmgrl is set to true?
I have attached PRODUCTION and DR queries outputs for better understanding.
IN PRIMARY DATABASE
SQL>select database_role from v$database;
DATABASE_ROLE
PRIMARY
SQL> select switchover_status from v$database;
SWITCHOVER_STATUS
SESSIONS ACTIVE
SQL> select db_unique_name,database_role,open_mode,log_mode,protection_mode from v$database;
DB_UNIQUE_NAME DATABASE_ROLE OPEN_MODE LOG_MODE PROTECTION_MODE
maxprod PRIMARY READ WRITE ARCHIVELOG MAXIMUM PERFORMANCE
SQL> select process,status,client_process,sequence# from v$managed_standby;
PROCESS STATUS CLIENT_P SEQUENCE#
ARCH CLOSING ARCH 7820
ARCH CLOSING ARCH 7835
ARCH CLOSING ARCH 7835
ARCH CLOSING ARCH 7821
ARCH CLOSING ARCH 7822
ARCH CLOSING ARCH 7822
ARCH CLOSING ARCH 7793
ARCH CLOSING ARCH 7823
ARCH CLOSING ARCH 7824
ARCH CLOSING ARCH 7824
ARCH CLOSING ARCH 7825
ARCH CLOSING ARCH 7825
ARCH CLOSING ARCH 7826
ARCH CLOSING ARCH 7826
ARCH CLOSING ARCH 7827
ARCH CLOSING ARCH 7827
ARCH CLOSING ARCH 7828
ARCH CLOSING ARCH 7828
ARCH CLOSING ARCH 7829
ARCH CLOSING ARCH 7829
ARCH CLOSING ARCH 7830
ARCH CLOSING ARCH 7830
ARCH CLOSING ARCH 7831
ARCH CLOSING ARCH 7831
ARCH CLOSING ARCH 7832
ARCH CLOSING ARCH 7832
ARCH CLOSING ARCH 7833
ARCH CLOSING ARCH 7833
ARCH CLOSING ARCH 7834
ARCH CLOSING ARCH 7834
30 rows selected.
SQL> sho parameter log_archive_config
NAME TYPE VALUE
log_archive_config string DG_CONFIG=(MAXPROD,EAMDR)
SQL> spool off
IN SECONDARY DATABASE
SQL> select database_role from v$database;
DATABASE_ROLE
PHYSICAL STANDBY
SQL> select switchover_status from v$database;
SWITCHOVER_STATUS --------------------
NOT ALLOWED
SQL> select db_unique_name,database_role,open_mode,log_mode,protection_mode from v$database;
DB_UNIQUE_NAME DATABASE_ROLE OPEN_MODE LOG_MODE PROTECTION_MODE
EAMDR PHYSICAL STANDBY MOUNTED ARCHIVELOG MAXIMUM PERFORMANCE
SQL> select process,status,client_process,sequence# from v$managed_standby;
PROCESS STATUS CLIENT_P SEQUENCE#
ARCH CLOSING ARCH 7809
ARCH CLOSING ARCH 7810
ARCH CLOSING ARCH 7812
ARCH CLOSING ARCH 7813
ARCH CLOSING ARCH 7814
ARCH CLOSING ARCH 7815
ARCH CLOSING ARCH 7816
ARCH CLOSING ARCH 7817
ARCH CLOSING ARCH 7818
ARCH CLOSING ARCH 7819
ARCH CLOSING ARCH 7820
ARCH CLOSING ARCH 7821
ARCH CLOSING ARCH 7822
ARCH CLOSING ARCH 7823
ARCH CLOSING ARCH 7824
ARCH CLOSING ARCH 7825
ARCH CLOSING ARCH 7826
ARCH CLOSING ARCH 7827
ARCH CLOSING ARCH 7828
ARCH CLOSING ARCH 7829
ARCH CLOSING ARCH 7830
ARCH CLOSING ARCH 7831
ARCH CLOSING ARCH 7832
ARCH CLOSING ARCH 7833
ARCH CLOSING ARCH 7835
ARCH CLOSING ARCH 7804
ARCH CLOSING ARCH 7805
ARCH CLOSING ARCH 7806
ARCH CLOSING ARCH 7807
ARCH CLOSING ARCH 7808
MRP0 WAIT_FOR_LOG N/A 7836
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLEMeenakshy singh wrote:
Hi All,
My oracle database version is Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit on windows platform.
I need to perform switchover activity.When I checked the status of DR database I found that switchover_status is NOT ALLOWED rather than SESSION ACTIVE or TO PRIMARY.I have doubt whether switchover can be done successfully or not?
I have attached PRODUCTION and DR queries outputs for better understanding.
IN PRIMARY DATABASE
SQL>select database_role from v$database;
DATABASE_ROLE
PRIMARY
SQL> select switchover_status from v$database;
SWITCHOVER_STATUS
SESSIONS ACTIVE
SQL> select db_unique_name,database_role,open_mode,log_mode,protection_mode from v$database;
DB_UNIQUE_NAME DATABASE_ROLE OPEN_MODE LOG_MODE PROTECTION_MODE
maxprod PRIMARY READ WRITE ARCHIVELOG MAXIMUM PERFORMANCE
SQL> select process,status,client_process,sequence# from v$managed_standby;
PROCESS STATUS CLIENT_P SEQUENCE#
ARCH CLOSING ARCH 7820
ARCH CLOSING ARCH 7835
ARCH CLOSING ARCH 7835
ARCH CLOSING ARCH 7821
ARCH CLOSING ARCH 7822
ARCH CLOSING ARCH 7822
ARCH CLOSING ARCH 7793
ARCH CLOSING ARCH 7823
ARCH CLOSING ARCH 7824
ARCH CLOSING ARCH 7824
ARCH CLOSING ARCH 7825
ARCH CLOSING ARCH 7825
ARCH CLOSING ARCH 7826
ARCH CLOSING ARCH 7826
ARCH CLOSING ARCH 7827
ARCH CLOSING ARCH 7827
ARCH CLOSING ARCH 7828
ARCH CLOSING ARCH 7828
ARCH CLOSING ARCH 7829
ARCH CLOSING ARCH 7829
ARCH CLOSING ARCH 7830
ARCH CLOSING ARCH 7830
ARCH CLOSING ARCH 7831
ARCH CLOSING ARCH 7831
ARCH CLOSING ARCH 7832
ARCH CLOSING ARCH 7832
ARCH CLOSING ARCH 7833
ARCH CLOSING ARCH 7833
ARCH CLOSING ARCH 7834
ARCH CLOSING ARCH 7834
30 rows selected.
SQL> sho parameter log_archive_config
NAME TYPE VALUE
log_archive_config string DG_CONFIG=(MAXPROD,EAMDR)
SQL> spool off
IN SECONDARY DATABASE
SQL> select database_role from v$database;
DATABASE_ROLE
PHYSICAL STANDBY
SQL> select switchover_status from v$database;
SWITCHOVER_STATUS --------------------
NOT ALLOWED
SQL> select db_unique_name,database_role,open_mode,log_mode,protection_mode from v$database;
DB_UNIQUE_NAME DATABASE_ROLE OPEN_MODE LOG_MODE PROTECTION_MODE
EAMDR PHYSICAL STANDBY MOUNTED ARCHIVELOG MAXIMUM PERFORMANCE
SQL> select process,status,client_process,sequence# from v$managed_standby;
PROCESS STATUS CLIENT_P SEQUENCE#
ARCH CLOSING ARCH 7809
ARCH CLOSING ARCH 7810
ARCH CLOSING ARCH 7812
ARCH CLOSING ARCH 7813
ARCH CLOSING ARCH 7814
ARCH CLOSING ARCH 7815
ARCH CLOSING ARCH 7816
ARCH CLOSING ARCH 7817
ARCH CLOSING ARCH 7818
ARCH CLOSING ARCH 7819
ARCH CLOSING ARCH 7820
ARCH CLOSING ARCH 7821
ARCH CLOSING ARCH 7822
ARCH CLOSING ARCH 7823
ARCH CLOSING ARCH 7824
ARCH CLOSING ARCH 7825
ARCH CLOSING ARCH 7826
ARCH CLOSING ARCH 7827
ARCH CLOSING ARCH 7828
ARCH CLOSING ARCH 7829
ARCH CLOSING ARCH 7830
ARCH CLOSING ARCH 7831
ARCH CLOSING ARCH 7832
ARCH CLOSING ARCH 7833
ARCH CLOSING ARCH 7835
ARCH CLOSING ARCH 7804
ARCH CLOSING ARCH 7805
ARCH CLOSING ARCH 7806
ARCH CLOSING ARCH 7807
ARCH CLOSING ARCH 7808
MRP0 WAIT_FOR_LOG N/A 7836
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
RFS IDLE UNKNOWN 0
56 rows selected.
SQL> sho parameter log_archive_config
NAME TYPE VALUE
log_archive_config string DG_CONFIG=(MAXPROD,EAMDR)
SQL> spool off
1.In this case,is switchover is possible?No
2.If not possible then what will be the next step?If the value in the SWITCHOVER_STATUS column is SESSIONS ACTIVE, identify and terminate active user or SQL sessions that might prevent a switchover from being processed.
If, after performing these steps, the SWITCHOVER_STATUS column still displays SESSIONS ACTIVE, you can successfully perform a switchover by appending the WITH SESSION SHUTDOWN clause to the
ALTER DATABASE COMMIT TO SWITCHOVER TO PHYSICAL STANDBY statement.
3.Is this will impact to our production database when switchover is not successfully perform?
4.In DR RFS is idle,why?Can you paste here log_archive_dest_n paramete which is you are using for transport?
Did you using DELAY attribute in log_archive_dest_n parameter?
Mahir -
Failover from standby database to primary database
Hi,
Can anyone suggest me, How to do " Standby DataGuard database to primary database (dataguard)".
Kindly Give me steps.
Thanks,
ShwetaHi
Follow these steps
Oracle switchover operation:
1. Check and verify the role parameter on the v$parameters both primary and standby
On Primary
Log_archive_dest_1=”this is the local archive destination”
+Log_archive_dest_2=”This is the Service [TNS ENTRY]”+
Log_archive_dest_state_1=Enable
Log_archive_dest_state_2=Enable
Fal_server=”this should have the tns entry for the standby
Fal_Client=”this should have the tns entry for the primary
Standby_archive_dest=”This should have the Location where the archive located”
Standby_File_Management=AUTO
On Standby
Log_archive_dest_1=”this is the local archive destination”
+Log_archive_dest_2=”This is the Service [TNS ENTRY]”+
Log_archive_dest_state_1=Enable
Log_archive_dest_state_2=DEfer
Fal_server=”this should have the tns entry for the primary
Fal_Client=”this should have the tns entry for the standby
Standby_archive_dest=”This should have the Location where the archive located”
Standby_File_Management=AUTO
2. Down all the applications connects to the database
3. Shutdown both primary and standby databases
4. For RAC Keep Only one primary and One standby up and all other nodes should be down
5. Check the Primary database on Open mode and the Standby database on mount stage
6. On Primary
SQL>select switchover_status from v$database;Sessions Active or To standby will be appearing on the result
SQL> alter database commit to switchover to standby with session shutdown;
SQL> shutdown Immediate;
SQL>startup nomount;
SQL>alter database mount standby database;
SQL>Alter system set log_Archive_dest_state_2=defer;7. On Standby
SQL>select switchover_status from v$database;it is acceptable to have Sessions Active or To Primary
SQL>alter database commit to switchover to primary with session shutdown;
SQL>shutdown immediate;
SQL>Startup;
SQL.>Alter system set log_archive_dest_state_2=enable;8. On Primary
start the managed recovery
SQL>Alter database recover managed standby database disconnect from session;9. Check the log shipment is working from New Primary to New Standby Using
SQL>Alter system switch logfile; ---- On New Primary.check the alert log on both Primary and Standby for the log shipment and Media recovery.
10. If the switch over fail issue the following statement on standby (ORACLE 9i)
SQL> alter database recover managed standby database finish skip standby logfile ┘
SQL> alter database commit to switchover to primary┘
SQL> shutdown immediate;
SQL> Startup;11. If this don’t work please issue the below statement
SQL> alter database activate standby database skip standby logfile;12. If the switch over fail issue the following statement on standby (ORACLE 10g and above)
SQL> alter database recover managed standby database finish force;
SQL> alter database commit to switchover to primary;
SQL> alter database open;
SQL> shutdown Immediate;
SQL> startup;13. Added the temp file to your temp tablespace
If you follow the steps (10,11 & 12 ) you have to recreate the standby again. those steps are actually fail over steps. Hope this will be helpful
Cheers
Kanchana -
Select data from database tables with high performance
hi all,
how to select data from different database tables with high performance.
im using for all entries instead of inner joins, even though burden on data base tables is going very high ( 90 % in se30)
hw to increase the performance.
kindly, reply.
thnksAlso Check you are not using open sql much like distict order by group by , use abap techniques on internal table to acive the same.
also Dont use select endselect.
if possible use up to n rows claus....
taht will limit the data base hits.
also dont run select in siode any loops.
i guess these are some of the trics oyu can use to avoid frequent DATA BASE HITS AND ABVOID THE DATA BASE LAOD. -
Select data from table where field is initial
I have table that has 10 million records.
I want to select data from this table where certain date field is blank.
*SELECT * FROM table*
INTO TABLE internal table
WHERE PSTNG_DATE = BLANK.
Does anybody know how to select data from data base table when certain field is blank.
I cont select all data once and delete which i dont want, the table is big, it will blow up app server.
thanks in advance,
Sachin
Moderator: Pls do not lock the posting instead provide me the link, its disrespecting.Respect the forum rules and common sense, and you will be respected.
"how to select data from a database table when the field is blank" is very basic, and basic questions will be locked, because they have been asked many times and you can find the answer yourself with a little effort. There is nothing disrespectful about it.
Thread locked.
Thomas -
How to get the last SCN number from catalog database
Hi All,
I have a catalog database where my PROD database is registered. Evereyday at 12AM rman takes the hot backup of PROD.
Now I want to create a auxillary database using the last RMAN backup, for this I want to restore using the SCN from the catalog views.
Please help me to get the SCN number from the RC_ views.
Regards,
Bikramasifkabirdba wrote:
Current SCN:
Use the dbms_flashback package to get the current SCN. This value will be used during instantiation at the destination site, as well as by RMAN when duplicating the database.
SET SERVEROUTPUT ON
DECLARE
until_scn NUMBER;
BEGIN
until_scn:=
DBMS_FLASHBACK.GET_SYSTEM_CHANGE_NUMBER;
DBMS_OUTPUT.PUT_LINE('Until SCN: ' || until_scn);
END;
Regards
Asif KabirHello,
i am a bit confused,
SELECT CURRENT_SCN FROM V$DATABASE;
6272671324
and from your package
SET SERVEROUTPUT ON
DECLARE
until_scn NUMBER;
BEGIN
until_scn:=
DBMS_FLASHBACK.GET_SYSTEM_CHANGE_NUMBER;
DBMS_OUTPUT.PUT_LINE('Until SCN: ' || until_scn);
END;Until SCN: 6272671267
why are they different, and why first result is lower than yours? can you explain please, thank you
Ugur MIHCI -
Hi;
I try to select data from DataBase, But I get the following error, Could anyone help? thanks.
Exception in thread "main" java.lang.ClassNotFoundException: oracle.jdbc.driver.
OracleDriver
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at Lookup.main(Lookup.java:12)
import java.sql.*;
import java.io.*;
import java.util.*;
public class Lookup {
public static void main(String[] args)
throws SQLException, ClassNotFoundException {
String dbUrl = "jdbc:oracle:thin:@augur.scms.waikato.ac.nz:1521:comp319";
String user = "group029";
String password = "group029";
// Load the driver (registers itself)
Class.forName("oracle.jdbc.driver.OracleDriver");
Connection c = DriverManager.getConnection(dbUrl, user, password);
Statement s = c.createStatement();
//SQL code:
ResultSet r =
s.executeQuery("SELECT * " +"FROM movie");
StringBuffer results= new StringBuffer();
ResultSetMetaData metaData = r.getMetaData();
int numberOfColumns = metaData.getColumnCount();
for(int i=1; i<=numberOfColumns; i++)
results.append(metaData.getColumnName(i)+"\t");
results.append("\n");
while (r.next()){
for( int i=1; i <=numberOfColumns; i++)
results.append(r.getObject(i)+"\t");
results.append("\n");
s.close();
}It's a classpath problem. Either you mistyped the class name, or you don't have the class in your classpath. I think Oracle's drivers come in db12.zip or db12.jar or some such. Whatever that jar or zip file is, it has to be in your classpath, but it's not.
Or it is in your classpath, but you're in an appserver context where the classloader that the container provides for your app uses something other than the classpath variable. For instance, in tomcat, the jar file would be uder webapps/yourApplication/WEB-INF/lib I think.
Maybe you are looking for
-
Errors in random frames of JPEG sequence
I'm experimenting with the time lapse technique for school Photography class, using Ae CC on Windows 8.1 to string the 120 JPEGS together to create a 4 second experiment of light trails of cars. However in these 120 frames, there are two that come up
-
I have Itunes 11 and home sharing isnt in the side bar
I have logged in my home sharing and used it before but when I updated to itunes 11 its no longer in the side bar. and i found out how to make the side bar visible its just not there.
-
Adding hrs and minutes to time
Hi guys, I currently have a problem where I have two date fields with time stamps. The only bit i am currently interested in in these fields is the time factor. When i display them in their field they have a format of HH24:MI . I have a start time an
-
I find it takes an extremely long time to compile my web application with 75 .jsp files (14188 non-blank lines) and 24 .tag files (438 non-blank lines). About 24 minutes, in fact. I attribute this to the utility insisting on recompiling each and ever
-
Update dimension using Analytic Administration Services (AIS)
Hello, I need update a specific dimension using AIS but i don't like change the others outline's dimensions. I saw that exits an Incremental update option, but I need delete this dimension first and recreate again in order to delete unspecified membe