Thumb Drive write protected after plugging into MacBook Pro

So I recently plugged my 64GB thumb drive into my MacBook Pro to transfer music from my old mac to my new one.  Although as soon as I plugged into the MacBook Pro, it write protected it rendering it useless as I do not wish to use it as a storage drive for 60 songs!  It is not even 1/2 full and because I plugged it into a MacBook Pro I can't use it anymore!?  It is formatted to MS-FAT, and previously I had plugged it into my 09 MacBook with no problems!  Please help me Make it a read and write again!!!  The thumb drive is only a week old!!!  There are no virus' as I have had the music on my Mac for 5 years and it has all come from the iTunes store!!!

Choose Utilities from the Finder’s Go menu, open the Disk Utility, and try running the Repair Disk command on it. If that command’s not available or doesn’t work, copy your files off and try getting a replacement.
(121968)

Similar Messages

  • Lexar USB plugged into Macbook Pro stops wireless connection from working

    Just purchased a Macbook Pro recently.  Noticed today that when a USB stick was plugged in (Lexar 32 GB USB 3.0) was plugged in, the wireless networking could not connect to any network services. 
    Finder kept trying to get to the network storage and failing or timing out.  Time Machine failed to reach the server.
    Unplugging the USB stick fixed the problem.
    Anyone seen this before?
    Chris

    Thanks again for your help Rod!
    One of the first things I tried was different combinations of devices to see if it may have been the device just not powering up. The main device I use is an official Apple wired keyboard, because at home I connect my MBP to my monitor and use a separate keyboard and mouse. I have tried other devices too with the same result, they only work when the dock is connected. I have tried connecting my iPhone via USB cable, i have a 16GB SanDisk Cruzer flash drive, which only lights up if the dock is connected, and I have a 4 port USB hub with a power LED on it, which again only lights up when the dock is connected.
    I looked in system profiler, and it says the USB ports are there, but doesn't recognise any devices plugged in, other than the dock. However, when the dock is plugged in, for example, it recognises the Apple keyboard in the other port.
    I took two screen shots, one of system profiler without the dock plugged in (USB keyboard still plugged in but not showing up), and another of when I plugged the dock in.
    Without Dock:
    With Dock:
    It might be worth pointing out that the HDD dock has two USB ports on it, which is what is highlighted in the second pic.
    I have also tried rebooting the computer with devices already attached but with the same result again. I've tried booting it with the dock and the keyboard attached, with just the keyboard, with just the dock, but either way unless the dock is connected, nothing else will work via USB.
    I just want to say thanks again Rod, it's very kind of you to spend your time trying to help me, and it is really appreciated!
    I'm going to contact Apple support shortly and see if they can offer a solution, or see if I can send it in for repair, which I am reluctant to do seeing as it's my only computer
    Cheers!
    Gav

  • IPhone 5 getting really really hot when plugged into MacBook Pro Retina?

    Hi
    I have had my Macbook for about 1 month and I recently discovered that my phone is getting extremely hot while charging through USB port.
    I was not sure if it was my phone as I was having issues with volume buttons, so was not sure if I had some dodgy software or something. So I went to the apple store and it was replaced as it was actually a hardware issue.
    But then with my new replacement iphone 5 I am still having the same issue of the phone becoming unbearable to touch because it is so hot!
    Does anyone know if there is an issue with the Macbook Pro Retina's giving out too much power and whether I should go and see someone about the issue ? But in the mean time is it still okay for my phone to be charge this way?
    Thanks
    Elle

    You said:
    "So far so good on the iPhone but it does not appear to be charging when I have it plugged into my MacBook Pro."
    My iPhone charges when connected to my MacBook.
    "FYI...the Edge Network out here in Wichita (of all freaking places) Kansas is pretty darn fast. I was really, pleasantly surprised. It does not help my heartbreak over moving to this burg from Sausalito but it helps a little."
    Even data is anxious to leave Wichita, it seems .. and wants to linger in Sausalito
    Phil

  • IPod error message when plugged into Macbook Pro

    My iPod will charge to my Macbook Pro for a moment or so then I get an error message stating that "This device or accessory is not supported..yadda yadda yadda" I have never had this happen in the past. Does anyone know how to fix this?

    T4,
    Then the pods that you have seem not to electrically match with your Mac, as the others that you tried seemed ok, am I right in this understanding?
    On the iPhone it has a very unique plug configuration that seems to set specifically for the iPhone, because it is a 4 conductor connector (one is for the microphone) that may make other pods not work properly. (yes this is an Apple thing, AAAAARRRRGGGG!!!!)
    But that would then confirm that there is not anything wrong with your Mac, as those Apple pods are for the iPhone, I guess both good and bad news.
    I don't use my iPhone to listen to music, nor do I use pods either, unless the artist I am working with is, then I use the same make and model so I can "hear what they hear".
    I do pro audio for a living and I can understand this "crosstalk issue with the 4th connector"
    But without getting too technical,  it would seem your Mac is just fine, which is a good thing.
    I would think that the newer Macs will be more compatible with the Apple iPhone pods, but they all seem to have their issues with the switching system...for years now!
    Hope this helps you understand this "FRUIT FLY"
    My suggestion is to use "regular headphones/ear pods with your Mac and the Apple iPhone pods with the phone. )I only have ever used the iPhone pods with the iPhone when I'm driving, and with only the iPhone. I have much better sounding pods/phones that I use to "ACTUALLY' listen to music with....and it a'int MP3/4
    Peace SJP

  • TS2634 My iPad Charger has stopped working after plugging into MacBook Air?

    Hello there,
    I have owned my iPad Mini for about 2 months now, and the charger has stopped working. It sometimes works on my MacBook Air, but often I get a popup on my computer saying, "To prevent damaging your computer, the USB device drawing too much power has been disabled. Other devices may have also been disabled. When you disconnect the device drawing too much power, your other USB devices will be enabled again." I have tried plugging my iPad into a wall charger, but it still does not charge. There is a small hole and the first part of the cable from the iPad is a bit twisted. Is there any way of fixing this, or do I have to buy another?

    Computer USB ports often do not provide enough power to charge an iPad efficiently. The best way to charge an iPad is with the charger that came with the iPad.
    Sounds like your cable is damaged too and needs to be replaced. My suggestion would be to buy two so that you have a backup. If your iPad has a lightning connector be sure to buy a name brand cable, either Apple or another well known brand. Do not buy cheap knockoff cables on eBay and they may not be certified to work with an iPad and you'll get an error message about that when you try to use them.

  • How do I open files from an external drive?  It's plugged into the second slot to the end.

    How do I open files from an external drive?  It's plugged into the second slot to the end.  Did I plug it into the right place and how do I find the drive when trying to attach a file in an email? 

    Files on an external hard drive open just like files on the internal drive - but I get the idea that you are having a problem just finding and seeing those files. Is that correct?
    What operating system is running on your MacBook?

  • ITunes no longer recognizes my iPod nano 5th gen.  When plugged into macbook usb it appears as my iPhone.  Previously both devices had individual identities. Have reset iPod and turned macbook off/on.

    iTunes no longer recognizes my iPod nano 5th gen.  When plugged into macbook usb it appears as my iPhone.  Previously both devices had individual identities. Have reset iPod and turned macbook off/on.

    Hello BPeery,
    I would go through ALL the steps here:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    Let us know how it goes.
    Hope this helps.
    ~Julian

  • My iPad won't charge after plugging into my computer and after holding down the power and home button at same time for 10 seconds- Can anybody help? Has IOS7.0 but the most up-to-date version

    My iPad won't charge after plugging into my computer and after holding down the power and home button at same time for 10 seconds… Can anybody help? Has IOS7.0 but not the most up-to-date version

    It's just the battery sign - nothing else. I've tried to reboot by holding down both power and home key for 10+ seconds, waiting for the apple logo - but nothing happens. It's plugged into the imac at the moment. I tried to recharge it overnight using the normal charger - but no luck. It went dead during a Skype call with a friend - even though it was powered into the mains - albeit at a low battery level at the time

  • Hoy can I include my thunderbolt display, in my Applecare Protection Plan, after registering my MacBook Pro?

    Hoy can I include my thunderbolt display, in my Applecare Protection Plan, after registering my MacBook Pro?

    Call apple, they will ask for the display serial number to add

  • Is it common that iPhone would make buzzing sound after plugged into a charger?

    Hi, I have recently noticed that my iPhone would make buzzing sound through the headphone jack after plugged into a charger. I am not sure if this is common among other iPhones.

    Yeah it is. Also tried with computer, dock, etc.

  • HT1349 i pad won't turn on even after plugging into computer?

    I pad will not turn on even after plugging into computer and into wall. Any suggestions?

    Have you tried a soft-reset to see if that gets it to boot up ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo will hopefully appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I have heat issues into MacBook pro after installing windows 8. when boot from windows ha've overheating. how can I fix it??

    Have heat issues into MacBook pro when boot from windows partition how can I fix it??

    panarpan wrote:
    Have heat issues into MacBook pro when boot from windows partition how can I fix it??
    Are you saying you're running Windows in BootCamp or Windows as a Virtual Machine? You can increase the fan speed on the Mac using smcFanControl and use the software OGELTHORPE recommended to observe improvements.
    smcFanControl is a Mac application and doesn't work in Windows, but if you set a higher minimum fan speed (which is how smcFanControl works) while running OS X, when you reboot into a BootCamp partition, that minimum speed tends to be carried over.

  • WD Smartware, external hard drive back up not recognized by Macbook Pro

    I use WD external hard drive as back up for my Macbook Pro using WD Smartware. All software is upto date but when I plug in my external hard drive it is now not recognised by my Mac. It does not appear in Finder or Disk Utility but it does show up in System Profiler. It has worked fine until now. I have changed the UCB cables multiple times, the external WD hard drive has its own power suppy and other external hard drives work in the same usb port. When I plug the external drive into a PC it is recognised but obviously will not let me use it. When I go to access via the PC it prompts me for the password to open the drive, however when I plug into my Mac, when I click on 'unlock drive' its says that the drive is not locked. The WD Smartware software runs to check the files on my Mac but after categorising them the 'back up' option is not highlighted and it will not access the external WD drive.
    How can I access the WD external drive ? System Profiler data is below. Many thanks, apologies for any ignorance and thanks in anticipation of any help !
    My Book 1110:    Capacity:     804.4 MB (804,421,632 bytes)   Removable Media:     Yes   Detachable Drive:     Yes   BSD Name:     disk1   Product ID:     0x1110   Vendor ID:     0x1058  (Western Digital Technologies, Inc.)   Version:     20./My Book 1110:    Capacity: 804.4 MB (804,421,632 bytes)   Removable Media: Yes   Detachable Drive: Yes   BSD Name: disk1   Product ID: 0x1110   Vendor ID: 0x1058  (Western Digital Technologies, Inc.)   Version: 20.18   Serial Number: 574341565931323033383539   Speed: Up to 480 Mb/sec   Manufacturer: Western Digital   Location ID: 0xfd130000 / 5   Current Available (mA): 500   Current Required (mA): 2   Partition Map Type: Unknown   S.M.A.R.T. status: Not Supported   Volumes:   Capacity: 700.4 MB (700,448,768 bytes)   Writable: No   BSD Name: disk1s0   Capacity: 32 KB (32,256 bytes)   Writable: No   BSD Name: disk1s0s1 WD SmartWare:   Capacity: 229.7 MB (229,672,960 bytes)   Available: Zero KB   Writable: No   File System: HFS    BSD Name: disk1s0s2   Mount Point: /Volumes/WD SmartWare18   Serial Number:     574341565931323033383539   Speed:     Up to 480 Mb/sec   Manufacturer:     Western Digital   Location ID:     0xfd130000 / 5   Current Available (mA):     500   Current Required (mA):     2   Partition Map Type:     Unknown   S.M.A.R.T. status:     Not Supported   Volumes:   Capacity:     700.4 MB (700,448,768 bytes)   Writable:     No   BSD Name:     disk1s0   Capacity:     32 KB (32,256 bytes)   Writable:     No   BSD Name:     disk1s0s1 WD SmartWare:   Capacity:     229.7 MB (229,672,960 bytes)   Available:     Zero KB   Writable:     No   File System:     HFS+   BSD Name:     disk1s0s2   Mount Point:     /Volumes/WD SmartWare

    mjunder Hong Kong
       I use WD external hard drive as back up for my Macbook Pro using WD Smartware.
    To be a parrot,.......REMOVE the WD garbageware.  
    Western Digital warned its users about its OWN software couple months ago.
    Remove ANY and ALL WD software products.

  • My WD 2tb external hard drive will not unmount from my MacBook Pro.

    My WD 2tb external hard drive will not unmount from my MacBook Pro. It no longer even shows up in finder, however it does show up in Disk Utility. I have tired so many of the suggestions on the internet all to a fail.
    I keep getting the message to be sure that all applications are closed before ejecting the drive. I have no clue how to tell which appliactions are using the external drive to shut them off. I turned off Time Machiene to be safe. 
    I don't need anything on the external drive, I am just trying to erase it, save my current info, and migrate it to my new MacBook Pro.
    I have been about four days now with this issue all over the internet, in this community, and watching videos on everything and nothing about this topic to a fail.
    I think I am doomed and have lossed this external drive because of some wierd application that will NEVER close on my hard drive for it to disconnect correctly. It's annoying.
    Does anyone have a solution?

    Have you trie using another USB port? Can you test the USB ports with other USB devices to assure they are working? You may want to reinstall OS X in case there has been a driver glitch.
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • External Hard Drive Issues using WD Passport with MacBook Pro

    I am unable to view my external hard drive (WD Passport 160gb external hard drive model # wd1600me-01) with my MacBook Pro.  I already tried using the Utility Disk application by utilzing the repair function and mounting it.  Please help.  Any Suggestions?

    Im familiar with that HD, I have one currently disassembled for just the bare HD...., it has a removable SATA bridge, if the HD wont spin up but the light comes on, on the HD, then the SATA bridge is bad.
    If it appears in disk utility and the light comes on BUT the HD doesn't spin up, then either the SATA bridge is dead, or the HD is dead (least likely).
    Youd have to crack open the HD, remove the SATA bridge cart thats plugged into the HD and put the HD into an enclosure or a HD dock to get the data
    those external HD use a 50 cent SATA bridge famous for failing.  The curse of all the good HD externals is the junk 3rd party SATA bridges attached to them that crash and burn.
    It doesn't matter it was used once and stored away for 5 years,.....HD lose their ferromagnetic properties at about 20-40%  at 4-6 years.
    And if stored in a hot place, a LOT more.

Maybe you are looking for

  • Very strange problem with wikipedia on my Macbook Pro 15"

    I have a Macbook Pro that I bought in June 2010, 2.66 GHz Intel Core i7 4 GB memory, Snow Leopard OSX (of which all may not be relevent) but recently I've been having possibly the WEIRDEST issue with wikipedia.  I just go to the site, and a split sec

  • Report can't open in Crystal Viewer

    Post Author: peachpx CA Forum: Publishing Hi - Can anyone help? I am scheduling report with e-mail as a destination.  Once e-mail is received it fails to open with Crystal Viewer XI with following error: Problem Encountered: com.crystaldecisions.repo

  • Ipod nano 4gb connect to windows xp and apple imac at the same time

    can i connect my new ipod in my windows xp and download my songs then can i go to my new apple imac computer and connect my nano to that one as well and start downloading my songs i was told it will erase all my songs help!

  • AI not printing parts of file in color

    Hello, My problem is Adobe Illustrator will not print certain parts of a flyer I created in color. The Left side picture prints ok but the text "Art Department" prints in b&w.

  • CFDocument- Output is cutting lines

    The PDF document being produced is perfect on all 3 pages except for the first line of every pages (other than P1) is being cut "horizontally"... the line is there but I can only see the bottom/lower half of it.... as if the space reserve for the hea