Thursday is the last day to vote for your favorite authoring tool
Hi, folks.
Thursday, January 6 is the last day to vote for your favorite authoring tool!
WritersUA is inviting help authors to participate in it's annual tool survey.
http://www.surveymonkey.com/s/tools_survey
It's not long, just a page. I'd encourage everyone to participate.
The results of this annual survey will be available before or during the annual WritersUA conference slated for March 13-16, 2011 in Long Beach, California.
Hope to see everyone there!
john
John Daigle
Adobe Certified RoboHelp and Captivate Instructor
Evergreen, Colorado
www.showmethedemo.com
Similar Messages
-
Vote for your favorite music creation app!
http://emusician.com/
I found this on another forum.. I just voted and noticed that Logic heads haven't stepped up to vote yet.Maybe it's because Logic users are too busy making kick**s music instead of schlepping around online?
In all seriousness, I have noticed I spend more time in Logic and less time on forums since I switched from Sonar. I think I was constantly looking for that one crucial tip that would make Sonar worthwhile. I never found it. -
How to get the last day according to fiscal period input in selection scree
Hello expert
how to get the last day of fiscal period input.
the fiscal period inculdes 1-16
when fiscal period is greater than 12, only calculate the last day of 12nd month
your solution will be apprecaited, FM existing?
thank you
KevinHi,
when you give a particular date in any month
the following fm will give you the last date of that month
here you can give
R_FDATE-HIGH as 01 and month as the period you wnat and year for current year
concatenates '01' month year into r_fdate-high separated by '.'.
then it will give g_ltdt for that month and year which wil be the last date of that month
CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
EXPORTING
DAY_IN = R_FDATE-HIGH
IMPORTING
LAST_DAY_OF_MONTH = G_LTDT
EXCEPTIONS
DAY_IN_NO_DATE = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
thanks & regards,
Venkatesh -
How do I set a reminder for the last day of every month
Have I missed something? But how do you set a reminder for the last day of every month to recurr indefinatley in iOS6? Sorry if this is really simple but I just can't seem to work it out. Any help gratefully received.
Hey Mattye88 not sure if you have seen but actully you can do this, but for some reason you have to use Siri. If you bring up Siri and say "set a reminder ever 4 weeks from next wednesday to check the gas meter" it will set one and it will work just fine, I have reminders to water a Bonsai every three days and it works fine it just shows as custom repeat on the user interface. Alas it seems you can not use Siri to set one for the end of the month though which is why I am in this threed. Still hope it helps you to know how to sort this problem atleast.
-
How do I set a recurring event for the last day of the month on iphone 4s calendar?
I want to set a recurring event for the last day of every month - regardless of the date/number of days in the month. I'd prefer not to have to use an app to do this.
Hi,
You can do this using the custom repeat in iCal. You'll need two events to cover the second and fourth Mondays.
Create the event on the second Monday of the month. In Repeat select Custom... > Frequency: Monthly > On the: second Monday.
Do the same for the Fourth Monday.
Best wishes
John M -
How to get the date for the last day of a week?
Is there a easy way to get the date for the last day of week?
eg a week starts on monday and end on sunday
January 11, 2005 is the start date for the week
January 17, 2005 is the end date for the week
or
say
February 26, 2003 is the start date for the week
March 5, 2003 is the end date for the week
I just need a simple way of figuring that out....
I figured out how to get the start date for the week but just can't get the latter..
formatting of the date is not of a concern.. that I know how to do
thanks in advanceHow about something like the following?
Calendar someDay = new GregorianCalendar(2005,0,11);//2005 Jan, 11
//Note above that January is 0, not 1, as counting starts from 0.
someDay.add(Calendar.DAY_OF_MONTH,6); //add 6 days
java.util.Date lastDayOfWeek = someDay.getTime();
//If someDay was the start of a week, lastDayOfWeek should now be
//the last day of that week.
System.out.println(lastDayOfWeek.toString() ); -
I need help in Downloading Adobe Elements for my Mac & Adobe Acrobat for my laptop...I have been battling for the last day.
~graffiti wrote:
PjonesCET wrote:
I know if you attempt to download and exe file to Mac from a Mac Partition you'll get something like. Cannot not understand file format octet-stream. This means it does not recognize MS execute files.
Not necesarily. I've done it a few times.
PjonesCET wrote:
I'm not sure you can download a PC copy of Acrobat 9 unless you operating from bootcamp or other such application and running the PC partition.
Yes. You can.
I've learned something. New. This must be recently changed. That last time I clicked on a Link I though was a dmg file and turned out it was and exe file my Macs wouldn't allow me to do so. But haven't tried recently everytime and exe file comes up I cancel. I gues I am used to the time everytime a Virus or some other nasty was downloaded it was packaged in and exe file and Macs owuldn't allow it. I suppose with the INtel guts now they can no longer refuse to download. -
I am Greek. I purchased a film from ipad but for the last days it has not been downloaded and the status is "waiting".the charge has been made to my credit card. Does any body knows?
something other is dowloading somewhere on ipad
-
My macbook has Itunes and I am trying to download some songs that I bought on my Ipad onto the macbook. It has worked in the past, but one song has been downloading for the last day. No more will download it seems stuck downloading. I don't need the song. But I want the others to download.
Hi there,
You may find the information in the articles below helpful.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/ht1725
-Griff W. -
Getting the Last day for a given week number
Dear Gurus,
I want to find the Last day of a given week number.
Can anyone help me out.
Regards
Madhu KHere I dont want to pass date,
If I give Week Number, Can I get that Week Numbers
Last date and First Date.
test@ORA10G>
test@ORA10G> -- this query fetches the start and end dates for a specified week in the current year
test@ORA10G>
test@ORA10G> select
2 wk as week,
3 min(dt) as start_date,
4 max(dt) as end_date
5 from (
6 select
7 trunc(sysdate,'yyyy')+level-1 as dt,
8 to_char(trunc(sysdate,'yyyy')+level-1,'ww') as wk
9 from dual
10 connect by level <= trunc(add_months(sysdate,12),'yyyy') - trunc(sysdate,'yyyy')
11 )
12 where wk = &week_number
13 group by wk;
Enter value for week_number: 1
WE START_DAT END_DATE
01 01-JAN-08 07-JAN-08
test@ORA10G>
test@ORA10G> /
Enter value for week_number: 23
WE START_DAT END_DATE
23 03-JUN-08 09-JUN-08
test@ORA10G>
test@ORA10G> /
Enter value for week_number: 52
WE START_DAT END_DATE
52 23-DEC-08 29-DEC-08
test@ORA10G>
test@ORA10G> /
Enter value for week_number: 53
WE START_DAT END_DATE
53 30-DEC-08 31-DEC-08
test@ORA10G>
test@ORA10G>pratz
can be shortened further:
test@ORA10G>
test@ORA10G> select
2 to_char(trunc(sysdate,'yyyy')+level-1,'ww') as wk,
3 min(trunc(sysdate,'yyyy')+level-1) as start_dt,
4 max(trunc(sysdate,'yyyy')+level-1) as end_dt
5 from dual
6 where to_number(to_char(trunc(sysdate,'yyyy')+level-1,'ww')) = &week_number
7 connect by level <= trunc(add_months(sysdate,12),'yyyy') - trunc(sysdate,'yyyy')
8 group by to_char(trunc(sysdate,'yyyy')+level-1,'ww')
9 /
Enter value for week_number: 1
WK START_DT END_DT
01 01-JAN-08 07-JAN-08
test@ORA10G>
test@ORA10G> /
Enter value for week_number: 53
WK START_DT END_DT
53 30-DEC-08 31-DEC-08
test@ORA10G>
test@ORA10G> /
Enter value for week_number: 23
WK START_DT END_DT
23 03-JUN-08 09-JUN-08
test@ORA10G>
test@ORA10G> /
Enter value for week_number: 14
WK START_DT END_DT
14 01-APR-08 07-APR-08
test@ORA10G>
test@ORA10G>Message was edited by:
pratz -
To calculate the last day of a week
I have this problem.
I must calculate the last day (saturday) of a week, if I have somewhere day of a week.
For example
if today is Thursday 08/03 how can calculate Saturday 10/03?
Thank's a lot!!!The day number given previously is territory dependant. So, in France, the last day of week (day 7) is sunday instead of saturday...
You can try to work with next_day function, which is more independant :
SQL> select to_char(sysdate,'d') from dual;
T
4
SQL> select next_day(sysdate-1,'saturday') from dual;
NEXT_DAY
10/03/07
SQL> alter session set nls_territory='america';
Session altered.
SQL> select to_char(sysdate,'d') from dual;
T
5
SQL>
SQL> select next_day(sysdate-1,'saturday') from dual;
NEXT_DAY(
10-MAR-07
SQL> Nicolas. -
How to get the last day of the next month?
Hi all.
I need to get the last day of the next month. E.g. if the date is 20.03.2008 I need to get 30.04.2008.
Is there any FM for it?
TIA, Nikolai.hi Nikolai,
pls. have a look athe following piece of code:
PARAMETERS : p_date TYPE sy-datum.
DATA : gv_res TYPE sy-datum.
CALL FUNCTION 'CALCULATE_DATE'
EXPORTING
* DAYS = '0'
months = '2'
start_date = p_date
IMPORTING
result_date = gv_res.
==> Now you have (gv_res) 2 months later as today
gv_res+6(2) = '01'. ==> gv_res is first day of next-next month
gv_res = gv_res - 1. ==> gv_res is last day of next month
hope this helps
ec -
How to get the last day of the week?
Hii
i can get the calender week number for any given date using
SELECT to_char(to_date('04/04/2011','MM/DD/YYYY'),'WW') FROM dual
can any body tell me, how to get the last day of that week ?
and the answer should be 04/08/2011(8th april )
thanks
San
Edited by: sandeep9 on Apr 4, 2011 3:50 AMHi, San,
Here's one way:
WITH sample_data AS
SELECT DATE '2011-04-04' AS dt
FROM dual
SELECT dt
, TO_CHAR (dt, 'WW') AS week_num
, NEXT_DAY ( dt - 1
, TO_CHAR ( TRUNC (dt, 'YEAR') - 1
, 'Day'
) AS end_o_week
FROM sample_data;Another way is to use date arrithmetic:
WITH sample_data AS
SELECT DATE '2011-04-09' AS dt
FROM dual
SELECT dt
, TO_CHAR (dt, 'WW') AS week_num
, TRUNC (dt, 'YEAR')
+ (7 * CEIL ( (dt - (TRUNC (dt, 'YEAR') - 1))
/ 7
- 1 AS using_date_arithmetic
FROM sample_data; -
How to get the last day of the previous month
Hello Team,
If my input date is today , then i need to find out the last day of the previous month for the same.
Can someone help me to find out .. how can this be done.
Regards,
RaviHi,
Try the below code.
// get a calendar object
GregorianCalendar calendar = new GregorianCalendar();
// convert the year and month to integers
int yearInt = Integer.parseInt(year);
int monthInt = Integer.parseInt(month);
int dayInt = Integer.parseInt(day);
// adjust the month for a zero based index
monthInt = monthInt - 1;
// set the date of the calendar to the date provided
calendar.set(yearInt, monthInt, dayInt);
int day = calendar.getActualMaximum(GregorianCalendar.DAY_OF_MONTH);
return Integer.toString(day);
Regards
Venkat -
BIP eBusiness Suite Dates - How to include the last day of the month?
How can I get my report to include the last day of the month 'without' forcing my users to enter the non-intuitive first of the next month as a parm?
I have a report that will generally be run for a month but can be run for any pair of dates representing the first and last date to be included in the report.
When we pass the dates from Oracle Apps to the report it is truncating the date to midnight. This results in the last date entered 'NOT' being included in the report as the second date is marked as "midnight". When I attempt to simply add "=1" to the end date it fails due to formatting issues in apps (only). I have gotten this to work on our Enterprise edition server that we use for testing (only) but it fails in our apps environment.
In APPs we input the date in the format "01-AUG-2007", and this is how it shows in the parm line before the report is submitted as well as in the "View Details" after the report is executed: http://home.swbell.net/grog1//work/req_details_5607586.jpg
However it is odd in that we in the "View Log" entry it shows the date formatted as "2007/08/01 00:00:00": http://home.swbell.net/grog1/work/view_log_5607586.jpg
Even odder is that under diagnostics, "View XML" the date is formatted third way as: "2007/08/01 00:00:00.0" (note it now includes tenths of a second): http://home.swbell.net/grog1/work/view_xml_5607586.jpg
This of course makes it difficult to perform conversions and calculations on the date in the SQL.
Is APPs doing some sort of 'timestamp' conversion?
How can I get my report to include the last day of the month 'without' forcing my users to enter the non-intuitive first of the next month as a parm?
Any feedback is appreciated,
ScottNo. The problem/error occurs long before the data is formatted into xml for presentation to the format template.
The error occurs in the SQL in the 'data' template when I attempt to add a day to the date. It either does not like the implicit conversion with the "+1" and then the use of the "between" with another date or if I attempt to manually convert it has problems with the format mask.
Scott
Maybe you are looking for
-
How to Create Charts with the variable value
Hi, I have to create a crystal report in which i have given variable under "Facility:". I have kept two variables under facility of which one is like you can select one or more values and other one u can select only one value and i mentioned it as ma
-
Logging into a previously working website with same username and password
I am now unable to log into a previously used website for work after I cleared safari's history and website data. I am using the same username and password as previously performed before it was cleared. I am able to log in on my desktop at work using
-
Hi everyone. Hey, i'm still using premiere pro cs3 to finish up one project that I started a long time ago. I was just about to put the finishing touches on an export. I started loading my project, but I refuses to load. It gives me the following e
-
How to get that high-tech look from access connections
how do i get that Message Edited by rachelroth on 07-21-2009 12:33 PM Solved! Go to Solution.
-
I want to delete the data content for InfoObject in processchain
Hi Guys, We have requirement to delete the data content for one InfoObject in processchain(daily) .Could you please tell me is there any function module or abap program or any other alternative to do this and which can be added to processchain. Than