TI DSP Toolkit with Code Composer Platinum

I've been using the LV DSP toolkit for TI with Code Composer 2.2x for some time with no problems. Recently upgraded to CCS Platinum and the DSP VIs aren't behaving as they used to. Primary problem is trying to open CCS, looks like it tries to open then immediately closes back down.
Has anyone else used the DSP toolkit with CCS Platinum? I may just switch back to CCS 2.2x.
Best regards and thanks,
Matthew

Hi Anurag,
The DSP toolkit is only compatable with a few pieces of hardware. You can find that information at this link. If you are not using the mentioned hardware then there is no guarantee that it will work. The reason you get the memory error is because MAX, and hence LabVIEW, does not recognize the device. It makes sense that it works when you use your own software to flash the program because you are bypassing the NI software that is not compatable with that device. Unfortunately, unless you are using one of the specific pieces of supported hardware there isn't much more we can do. I would recommend that if you are able to get your program to work using the flash mode, then just continue to do that way instead of trying to download it with the emulator. Thanks and have a great day.
Stephen S.
National Instruments
1 Test is worth 1000 expert opinions

Similar Messages

Download Error with TI DSP Toolkit with Code Composer

I have used TI DSP Toolkit with Code Composer to interface with code composer and LabVIEW. I am able to open the project, build the project etc. When I am downloading my binary to the DSP, the application is throwing error saying memmory address could not be validated. I am using emulator to download the code. I am able to download the code when I am using flash programmer option available with the code composer IDE. Any help to resolve the issue is highly appreciated.
Best Regards,
Anurag

Hi Anurag,
The DSP toolkit is only compatable with a few pieces of hardware. You can find that information at this link. If you are not using the mentioned hardware then there is no guarantee that it will work. The reason you get the memory error is because MAX, and hence LabVIEW, does not recognize the device. It makes sense that it works when you use your own software to flash the program because you are bypassing the NI software that is not compatable with that device. Unfortunately, unless you are using one of the specific pieces of supported hardware there isn't much more we can do. I would recommend that if you are able to get your program to work using the flash mode, then just continue to do that way instead of trying to download it with the emulator. Thanks and have a great day.
Stephen S.
National Instruments
1 Test is worth 1000 expert opinions

LabVIEW DSP Test Integration Toolkit support for Code Composer Studio version 4

Hi,
I came to know about the LabVIEW DSP Test Integration Toolkit support for Code Composer Studio from the link http://zone.ni.com/devzone/cda/tut/p/id/5839. I would like to know if this works with Code Composer Studio version 4 also. I am using CCSv4 with TMS320C6748 board. If not, can you please tell me if NI has brought out any software that helps in real time data exchange between CCSv4 and Labview?
Regards,
Debarati.

Debarati,
I did some more research into your issue and found out that unfortunately, NI no longer officially supports the DSP Test Integration Toolkit as seen here: http://zone.ni.com/devzone/cda/tut/p/id/5839
I also see that you located our example VI here http://zone.ni.com/devzone/cda/epd/p/id/4311 and that the VI asked you for a .pjt file that you could not locate in CCSv4. Being that we no longer support the DSP Test Integration Toolkit, your next course of action would be to contact TI and inquire what .pjt file corresponds to in the newest version of CCS. I hope TI can be of more help to you with this issue since, as I said before, we no longer support this toolkit.
My apologies,
Larry H
Applications Engineer
National Instruments

How to close(quit) TI Code Composer Studio with Labview?

Is there any way to actually close Code Composer Studio from Labview? Don't have any problems launching CCS and opening/closing projects, just exiting CCS...

Like I said in the other thread, the Simulate mouse down case calls a windows function called "PostMessage". It posts a mouse down message to a specific window. That means you have to give it the window name. That's what the string control is for. Like I said, for more than this, you will have to look into the mouse functions in MSDN and for DLL tutorials here.
The question should be "do you really need a mouse click"? Many things can be solved without simulating a click.
To learn more about LV, I suggest you start by reading the LabVIEW user manual. Also, try searching this site and google for LabVIEW tutorials. Here is one you can start with and here is another. You can also contact your local NI office and join one of their courses.
In addition, I suggest you read the LabVIEW style guide.
Try to take over the world!

Error MSB3073: The command exited with code -1

I am getting this error while deploying the biztalk project from visual studio using Deployment Framework for Biztalk (BTDF).
Please guide me what needs to be done. Here's the code :-
<?xml version="1.0" encoding="utf-8"?>

<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003" DefaultTargets="Installer" ToolsVersion="4.0">
<PropertyGroup>
<Configuration Condition="'$(Configuration)' == ''">Debug</Configuration>
<Platform Condition="'$(Platform)' == ''">x86</Platform>
<SchemaVersion>1.0</SchemaVersion>
<ProjectName>HelloWorld</ProjectName>
<ProjectVersion>1.0</ProjectVersion>
<IncludeOrchestrations>False</IncludeOrchestrations>
<IncludeTransforms>False</IncludeTransforms>
<IncludeSSO>True</IncludeSSO>
<UsingMasterBindings>True</UsingMasterBindings>
<RequireXmlPreprocessDirectives>False</RequireXmlPreprocessDirectives>
<ApplyXmlEscape>True</ApplyXmlEscape>
<SkipIISReset>True</SkipIISReset>
</PropertyGroup>
<PropertyGroup>






<ProductVersion>1.0.0</ProductVersion>
<ProductId>084986b1-d675-4383-b0ed-da2e3f4e3998</ProductId>

<ProductName>HelloWorld for BizTalk</ProductName>
<Manufacturer>Deployment Framework User</Manufacturer>
<PackageDescription>HelloWorld</PackageDescription>
<PackageComments>HelloWorld</PackageComments>

<ProductUpgradeCode>4975288c-1b94-4d42-868b-f166cdc02224</ProductUpgradeCode>
</PropertyGroup>



<PropertyGroup Condition="'$(Configuration)' == 'Debug'">
<DeploymentFrameworkTargetsPath>$(MSBuildExtensionsPath)\DeploymentFrameworkForBizTalk\5.0\</DeploymentFrameworkTargetsPath>
<OutputPath Condition="'$(TeamBuildOutDir)' == ''">bin\Debug\</OutputPath>
<OutputPath Condition="'$(TeamBuildOutDir)' != ''">$(TeamBuildOutDir)</OutputPath>
<DeployPDBsToGac>false</DeployPDBsToGac>
</PropertyGroup>
<PropertyGroup Condition="'$(Configuration)' == 'Release'">
<DeploymentFrameworkTargetsPath>$(MSBuildExtensionsPath)\DeploymentFrameworkForBizTalk\5.0\</DeploymentFrameworkTargetsPath>
<OutputPath Condition="'$(TeamBuildOutDir)' == ''">bin\Release\</OutputPath>
<OutputPath Condition="'$(TeamBuildOutDir)' != ''">$(TeamBuildOutDir)</OutputPath>
<DeployPDBsToGac>false</DeployPDBsToGac>
</PropertyGroup>
<PropertyGroup Condition="'$(Configuration)' == 'Server'">
<DeploymentFrameworkTargetsPath>Framework\</DeploymentFrameworkTargetsPath>

<DeployPDBsToGac>true</DeployPDBsToGac>
</PropertyGroup>
<ItemGroup>
<PropsFromEnvSettings Include="SsoAppUserGroup;SsoAppAdminGroup" />
</ItemGroup>



<ItemGroup>
<Schemas Include="HelloWorld.dll">
<LocationPath>..\$(ProjectName)\bin\$(Configuration)</LocationPath>
</Schemas>
</ItemGroup>

<Import Project="$(DeploymentFrameworkTargetsPath)BizTalkDeploymentFramework.targets" />

<Target Name="CustomRedist">
</Target>
</Project>
Error :-
Starting build...
C:\Windows\Microsoft.NET\Framework\v4.0.30319\MSBuild.exe "C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj" /nologo /t:Deploy /p:Configuration=Debug
Build started 08-04-2015 17:43:51.
Project "C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj" on node 1 (Deploy target(s)).
SetModeDeploy:
DEPLOYING APPLICATION TO BIZTALK...
SetWinVer:
Running on Windows V62
Detected IIS 7
Detected 64-bit OS
GetSoftwarePaths:
Using .NET Framework Install Path 'C:\Windows\Microsoft.NET\Framework\v4.0.30319'.
Using BizTalk Install Path 'C:\Program Files (x86)\Microsoft BizTalk Server 2013\'.
Using Deployment Framework Install Path 'C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\'.
Using Deployment Framework Tools Path 'C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools'.
Using BizTalk ESB Toolkit Install Path 'C:\Program Files (x86)\Microsoft BizTalk ESB Toolkit\'.
ExportSettings:
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\EnvironmentSettingsExporter.exe" "C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\SettingsFileGenerator.xml" "C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings"
Environment Settings Spreadsheet to XML Exporter 1.6.1
[http://EnvSettingsManager.codeplex.com]
Copyright (C) 2007-11 Thomas F. Abraham. All Rights Reserved.
Importing from SettingsFileGenerator.xml...
Output format is XmlPreprocess (multi-file).
Exporting to Exported_LocalSettings.xml...
Exporting to Exported_DevSettings.xml...
Exporting to Exported_TestSettings.xml...
Exporting to Exported_ProdSettings.xml...
Finished.
InitSettingsFilePath:
Using settings file C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml
SetPropertiesFromEnvironmentSettings:
Setting properties from environment settings file (C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml)
Setting property to value 'BizTalk Application Users'.
Setting property to value 'BizTalk Server Administrators'.
InitializeAppName:
BizTalk Application Name is HelloWorld
PreprocessBindings:
Checking syntax of XML file 'C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindingsMaster.xml'...
Syntax of XML file 'C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindingsMaster.xml' appears to be valid.
Clearing file attributes for 'PortBindings.xml'.
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\xmlpreprocess.exe" /v /c /noDirectives /i:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindingsMaster.xml" /o:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" /d:CurDir="C:\BTDF\Walkthrough1" /s:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml"
XmlPreprocess v2.0.18.0
Copyright (c) 2004-2013 Loren M Halvorson
XML File Preprocessor
Settings XML file: "C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml"
Preprocessing "C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindingsMaster.xml" to "C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml"...
PortBindings.xml : Set the value 'HelloWorld' of 2 node(s) matching XPath '//ApplicationName'.
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\ElementTunnel.exe" /i:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" /o:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" /x:"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\adapterXPaths.txt" /encode+
Nested XML Encoder/Decoder v5.5.100.0
Copyright (C) 2005-2014 Scott Colestock, Tim Rayburn, Thomas F. Abraham
XML encodes/decodes content of element(s) by XPath. Applies escaping rules such
as > for '<'. Namespace decls, PIs, etc. of nested XML are not preserved.
XPaths : 16
Transformed Nodes : 0
Empty Nodes (skipped) : 3
No Transform Req'd (skipped) : 3
Total Matched Nodes : 6
Complete - output file has been saved.
Checking syntax of XML file 'C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml'...
Syntax of XML file 'C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml' appears to be valid.
DeployFileAdapterPhysicalPaths:
Configuring FILE adapter physical paths from binding file PortBindings.xml...
Processing FILE adapter physical paths (Send)...
Setting up path 'C:\BTDF\Walkthrough1\Out'...
Directory already exists.
Granted 'BUILTIN\Users' Full Access permissions.
Processing FILE adapter physical paths (Receive)...
Setting up path 'C:\BTDF\Walkthrough1\In'...
Directory already exists.
Granted 'BUILTIN\Users' Full Access permissions.
TerminateServiceInstancesConditional:
Attempting to terminate all service instances for BizTalk app 'HelloWorld'...
Terminated 0 service instances for BizTalk app 'HelloWorld'.
VerifyBizTalkAppExists:
Checking for existence of BizTalk application 'HelloWorld'...
Did not find BizTalk application 'HelloWorld'.
DeployAppDefinition:
BTSTask.exe AddApp -ApplicationName:"HelloWorld" -Description:"HelloWorld"
Microsoft (R) BizTalk Application Deployment Utility Version 3.10.229.0
Copyright (c) 2013 Microsoft Corporation. All rights reserved.
Information: Adding new BizTalk application "HelloWorld" to configuration database (server="BDDBESBWMV01", database="BizTalkMgmtDb")...
Information: Added application "HelloWorld".
Command succeeded with 0 errors, 0 warnings.
UndeploySchemas:
Adding assembly name 'HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f' to item group.
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\gacutil.exe" /u "HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f"
Microsoft (R) .NET Global Assembly Cache Utility. Version 4.0.30319.1
Copyright (c) Microsoft Corporation. All rights reserved.
Number of assemblies uninstalled = 0
Number of failures = 0
DeploySchemas:
BTSTask.exe AddResource -Type:BizTalkAssembly -Source:"..\HelloWorld\bin\Debug\HelloWorld.dll" -ApplicationName:"HelloWorld" -Options:GacOnAdd,GacOnImport,GacOnInstall
Microsoft (R) BizTalk Application Deployment Utility Version 3.10.229.0
Copyright (c) 2013 Microsoft Corporation. All rights reserved.
Information: Adding resource (-Type="System.BizTalk:BizTalkAssembly" -Luid="HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f") to application "HelloWorld"...
Serialized BizTalk assembly "HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f" from "..\HelloWorld\bin\Debug\HelloWorld.dll".
Information: Validating resources (count=1)...
* Validating resource (-Type="System.BizTalk:BizTalkAssembly" -Luid="HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f")...
Information: Performing change requests...
Information: Calling BeginTypeChangeRequest for all selected resource types...
PerformingBeginChangeRequest
Adding resource (-Type="System.BizTalk:BizTalkAssembly" -Luid="HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f") to store.
Information: * Performing change request on type "System.BizTalk:BizTalkAssembly" (count=1)...
Information: Deploy server="BDDBESBWMV01" database="BizTalkMgmtDb" assembly="C:\Users\dopdevbiztalkadmin1\AppData\Local\Temp\BT\PID9536\BizTalkAssembly\4b4a4387187988d2dc55c72b16113199\HelloWorld.dll"
Information: Installed the "C:\Users\dopdevbiztalkadmin1\AppData\Local\Temp\BT\PID9536\BizTalkAssembly\4b4a4387187988d2dc55c72b16113199\HelloWorld.dll" assembly into the Global Assembly Cache. (force=True)
Information: Deploy operation succeeded.
Information: Deploy server="BDDBESBWMV01" database="BizTalkMgmtDb" assembly="C:\Users\dopdevbiztalkadmin1\AppData\Local\Temp\BT\PID9536\BizTalkAssembly\4b4a4387187988d2dc55c72b16113199\HelloWorld.dll"
Saved schema "Microsoft.Samples.BizTalk.HelloWorld.POSchema, HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f".
Saved schema "Microsoft.Samples.BizTalk.HelloWorld.InvoiceSchema, HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f".
Saved map "Microsoft.Samples.BizTalk.HelloWorld.POToInvoice".
Saved message type "Microsoft.Samples.BizTalk.HelloWorld.POMessageType".
Saved message type "Microsoft.Samples.BizTalk.HelloWorld.InvoiceMessageType".
Saved port type "Microsoft.Samples.BizTalk.HelloWorld.ReceivePOPortType".
Saved port type "Microsoft.Samples.BizTalk.HelloWorld.SendInvoicePortType".
Saved orchestration "Microsoft.Samples.BizTalk.HelloWorld.HelloSchedule".
Saved schema "Microsoft.Samples.BizTalk.HelloWorld.POSchema, HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f".
Saved schema "Microsoft.Samples.BizTalk.HelloWorld.InvoiceSchema, HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f".
Saved map "Microsoft.Samples.BizTalk.HelloWorld.POToInvoice".
Saved message type "Microsoft.Samples.BizTalk.HelloWorld.POMessageType".
Saved message type "Microsoft.Samples.BizTalk.HelloWorld.InvoiceMessageType".
Saved port type "Microsoft.Samples.BizTalk.HelloWorld.ReceivePOPortType".
Saved port type "Microsoft.Samples.BizTalk.HelloWorld.SendInvoicePortType".
Saved orchestration "Microsoft.Samples.BizTalk.HelloWorld.HelloSchedule".
Information: Installed the "C:\Users\dopdevbiztalkadmin1\AppData\Local\Temp\BT\PID9536\BizTalkAssembly\4b4a4387187988d2dc55c72b16113199\HelloWorld.dll" assembly into the Global Assembly Cache. (force=True)
Information: Deploy operation succeeded.
Information: Deployed the following 1 BizTalk assemblies:
HelloWorld.dll
EXEC : warning : If any of the assemblies were previously loaded by a Host Instance, it may be necessary to restart the Host Instance for changes to take effect. [C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj]
Information: Commit the change requests...
* Performing EndTypeChangeRequest for resource type "System.BizTalk:BizTalkAssembly".
Command succeeded with 0 errors, 0 warnings.
DeploySharedAssemblies:
Deploying additional assemblies to GAC...
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\gacutil.exe" /f /i "C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\SSOSettingsFileReader.dll"
Microsoft (R) .NET Global Assembly Cache Utility. Version 4.0.30319.1
Copyright (c) Microsoft Corporation. All rights reserved.
Assembly successfully added to the cache
Finished deploying additional assemblies to GAC.
ImportBindings:
Copying file from "C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" to "C:\BTDF\Walkthrough1\HelloWorld.Deployment\HelloWorld_PortBindings.xml".
BTSTask.exe AddResource -Type:BizTalkBinding -Overwrite -Source:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\HelloWorld_PortBindings.xml" -ApplicationName:"HelloWorld"
Microsoft (R) BizTalk Application Deployment Utility Version 3.10.229.0
Copyright (c) 2013 Microsoft Corporation. All rights reserved.
Information: Adding resource (-Type="System.BizTalk:BizTalkBinding" -Luid="HelloWorld_PortBindings.xml") to application "HelloWorld"...
Information: Validating resources (count=1)...
* Validating resource (-Type="System.BizTalk:BizTalkBinding" -Luid="HelloWorld_PortBindings.xml")...
Information: Performing change requests...
Information: Calling BeginTypeChangeRequest for all selected resource types...
PerformingBeginChangeRequest
Updating resource (-Type="System.BizTalk:BizTalkBinding" -Luid="HelloWorld_PortBindings.xml") in store.
Information: * Performing change request on type "System.BizTalk:BizTalkBinding" (count=1)...
Information: Commit the change requests...
* Performing EndTypeChangeRequest for resource type "System.BizTalk:BizTalkBinding".
Command succeeded with 0 errors, 0 warnings.
Deleting file "C:\BTDF\Walkthrough1\HelloWorld.Deployment\HelloWorld_PortBindings.xml".
BTSTask.exe ImportBindings -Source:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" -ApplicationName:"HelloWorld"
Microsoft (R) BizTalk Application Deployment Utility Version 3.10.229.0
Copyright (c) 2013 Microsoft Corporation. All rights reserved.
Information: Importing bindings "C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" into application "HelloWorld" in BizTalk configuration database (server="BDDBESBWMV01", database="BizTalkMgmtDb")...
Information: Imported application "HelloWorld" bindings.
Command succeeded with 0 errors, 0 warnings.
DeploySSO:
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\SSOSettingsFileImport.exe" "HelloWorld" /settingsFile:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml" /userGroupName:"BizTalk Application Users" /adminGroupName:"BizTalk Server Administrators"
Error persisting to SSO:
System.Runtime.InteropServices.COMException (0xC0002A18): The format of the account name is not valid. Domain accounts must include the domain name. Local accounts must not include a domain or computer name.
at Microsoft.BizTalk.SSOClient.Interop.ISSOAdmin.CreateApplication(String applicationName, String description, String contactInfo, String userGroupName, String adminGroupName, Int32 flags, Int32 numFields)
at SSOSettingsFileManager.SSOHelper.CreateApp(String appName, String userGroup, String adminGroup)
at SSOSettingsFileManager.SettingsFileImport.SaveSettingsToSSO(String affiliateAppName, String inSettings, String userGroupName, String adminGroupName)
at SSOSettingsFileManager.SettingsFileImport.Main(String[] args)
C:\Program Files (x86)\MSBuild\DeploymentFrameworkForBizTalk\5.0\BizTalkDeploymentFramework.targets(1701,5): error MSB3073: The command ""C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\SSOSettingsFileImport.exe" "HelloWorld" /settingsFile:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml" /userGroupName:"BizTalk Application Users" /adminGroupName:"BizTalk Server Administrators"" exited with code -1. [C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj]
Done Building Project "C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj" (Deploy target(s)) -- FAILED.
Build FAILED.
"C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj" (Deploy target) (1) ->
(DeploySchemas target) ->
EXEC : warning : If any of the assemblies were previously loaded by a Host Instance, it may be necessary to restart the Host Instance for changes to take effect. [C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj]
"C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj" (Deploy target) (1) ->
(DeploySSO target) ->
C:\Program Files (x86)\MSBuild\DeploymentFrameworkForBizTalk\5.0\BizTalkDeploymentFramework.targets(1701,5): error MSB3073: The command ""C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\SSOSettingsFileImport.exe" "HelloWorld" /settingsFile:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml" /userGroupName:"BizTalk Application Users" /adminGroupName:"BizTalk Server Administrators"" exited with code -1. [C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj]
1 Warning(s)
1 Error(s)
Time Elapsed 00:00:54.94

Hi Pratibha,
Thank you for posting in MSND forum.
Since
this forum is to discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor.
Based
on your issue, since it is related to the Deployment Framework for Biztalk (BTDF), so I suggest you could consult this issue directly to this Deployment Framework for Biztalk (BTDF) website:
https://biztalkdeployment.codeplex.com/discussions , you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Update master data in BW with Visual Composer

Hi guys.
I have an attribute of an info object that I need to give the users access to update.
I would like to do it with visual composer.
I would like the user to see all rows in a table kind of view and the user will update only the rows that need to be changed and than he/she will click on a button that will update the master data table in BW.
I believe that I'll need to use a BAPI or a RFC for that? Does anyone know any good predefined ones for that?
Thanks
Shlomi

That's not really true. In VC you have access to all remote enabled functions. We have created specific functions to update attributes.
We are using it to allow our users to update their own master data instead of bugging the BI team.
Here is an example of our code.
Before I paste this in, you need to know a couple things.
1. You can only update one record at a time (with my code)
2. You have to pass back in the entire record, even if you are only changing one attribute of many.
3. It automatically does the attribute change run, so you do not need to to it.
This is a simple infoobject with a few attributes.
First we created a Get function (which collects the data and shows it to the user.
Then we gave them a edit button on the table that goes to a pop up.
The user selects the record to change, then hits the edit button.
When the popup comes up the data is shown in a form, with a save and cancel button, fields that you do not wish users to see or change, hide them, but they all most be present on the form.
The when the user hits save, it send it to the below function. The name of the infoobject is ZCAT_SUB.
FUNCTION zcat_update_subparty2.
""Local Interface:
*" IMPORTING
*"     VALUE(I_T_ZSUBPARTY) LIKE /BIC/PZCAT_SUB
*" STRUCTURE /BIC/PZCAT_SUB
*" EXPORTING
*"     VALUE(E_RESULT) TYPE STRING
TYPE-POOLS: rs, rsarc, rsarr, sbiwa, rssm.
DATA:
        l_t_zsubparty LIKE /bic/pzcat_sub OCCURS 10,
        l_s_minfo      TYPE rssm_s_minfo,
        l_t_idocstate TYPE rsarr_t_idocstate,
        l_subrc        LIKE sy-subrc.
APPEND i_t_zsubparty TO l_t_zsubparty.
CALL METHOD cl_rsdmd_update_master_data=>update_attributes_static
    EXPORTING
      i_iobjnm      = 'ZCAT_SUB'
      i_t_data      = l_t_zsubparty
      i_s_minfo     = l_s_minfo
      i_monitoring = rs_c_false
    IMPORTING
      e_subrc       = l_subrc
    CHANGING
      c_t_idocstate = l_t_idocstate.
IF sy-subrc <> 0.
    e_result = 'Error happened'.
ELSE.
    e_result = 'Process Completed'.
    DATA:
      l_t_msg                  TYPE rs_t_msg,
      l_r_activate_master_data TYPE REF TO cl_rsdmd_activate_master_data.
    CREATE OBJECT l_r_activate_master_data
      EXPORTING
        i_iobjnm               = 'ZCAT_SUB'
        i_p_q_have_to_exist    = rs_c_true
      EXCEPTIONS
        iobj_not_found         = 1
        iobj_not_active        = 2
        generate_program_error = 3
        p_q_do_not_exist       = 4
        p_q_txt_do_not_exist   = 5
        OTHERS                 = 6.
    IF sy-subrc = 0.
      l_r_activate_master_data->activate( IMPORTING e_subrc = l_subrc
                                        CHANGING c_t_msg = l_t_msg ).
    ENDIF.
ENDIF.
ENDFUNCTION.

Deploy par files with code from NWDI

Hello Experts,
I have migrated some par files to NWDI and they are deployed via SDM as SDA files.
From eclipse it is possible to deploy the par files with Code. Is this possible from NWDI that the par files are deployed with code to the portal server.
Regards
Sundeep

Hi Satish,
I am using NWDS, and then check in the Portal DC which is then deployed on the runtime system.
My question is during deployment via NWDI is it possible that the par is deployed with code.
Earlier we were using eclipse for par based development, and this was possible in eclips.
With NWDI i dont think it is possible to control if the par should be deployed on the portal server with code included.
Regards
Sundeep

SRM MDM, Error, "Table with Code 'null' does not exist in repository"

Hi experts,
We has SRM MDM scenario, while doing OCI settings, we are able to connect with MDM repository but getting follwoing error message in portal, "java.lang.IllegalArgumentException: Table with Code 'null' does not exist in the repository 'Repository' or is one of the system table (e.g. Workflows) that is not exposed in repository schema"
Can You please suggest,
Thanks and Regards,
Munish

Hi everyone,
Sudhanshu and Anshuk:- Thanks for your response, let me try and explain the real scenario in details:-
We have deployed the SRM-MDM Catalog Search UI in Portal.
We tried accessing the http://<Portal Host>:<Portal Port>/SRM-MDM/SRM_MDM
Then we got a screen (Search UI App screen), where in we have provided the MDM Server name, then the MDM Server Password, then presses the Connect button, then below this, it displayed the Repository name created in the MDM. We have selected the Repository, then provided the Credentials of a User (Name: T_CORP) in MDM which has "Catalog Manager", and the "UI Configuration Manager" Roles. Please note that these Role names were created by us in MDM. Is it the right procedure or do we have any standard Roles delivered by SAP in MDM to map? If any standard Roles are available, where we need to check these.
Once the Credentials of MDM User is provided, and then selected the "Login" button.
Then we are getting the below error.
"java.lang.IllegalArgumentException: Table with Code 'null' does not exist in the repository 'Repository' or is one of the system table (e.g. Workflows) that is not exposed in repository schema"
Please clarify; we are not configuring any values in iViews. Where we need to do this, I mean name of the iView, and what values do we need provide generally? We are just running the Search UI App application; I don't think it is an iView, because the URL shows the Application name details, etc...
Please guide us, how to fix this Error.
Thanks and Regards,
Munish

Report generation toolkit with openoffice

hello all
i would like to know if it is possible to use the report generation toolkit with openoffice instead microsoft office? because i do not have the toolkit already i can't test it and i will only buy it if this is possible...
i ask also because i used another application with word export not long ago what was ending with the error message "windows ole server not found". so the question is if something of the microsoft product line is necessary? i am quite sure that the opening of a produced doc would be possible in openoffice without problems - at least i hope so!
only one thread i found, unfortunately in french : http://forums.ni.com/ni/board/message?board.id=4170&message.id=13060&query.id=139594#M13060
thanks a lot, mischl

Another option to consider is to use the report generation VIs that ship with LV and simply output to a PDF document rather than a hardcopy printer.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Apache Error Log mod_security: Access denied with code 400

Hi
I am seeing the Access denied with code 400 errors in the apache log's after applying CPU Patch updates below into a Dev/TEST environment
RDBMS Patches: 9032412 & 9352191 & post steps below:
@?/rdbms/admin/dbmsaqds.plb
@?/rdbms/admin/prvtaqds.plb
@?/rdbms/admin/prvtaqiu.plb
Java Fix > [ID 1082747.1]
E-Business Suite Patches & post steps below:
9323613 & 9506302
Compiled Forms PLL files using adadmin to solve the known problem below
ORA-04062: signature of package "APPS.FND_HELP" has been changed
ORA-04062: KEY-HELP trigger raised unhandled exception ORA-04062.
the error can be replicated by following the steps below:
Log in to Oracle Apps E-Business Suite (11.5.10.2) select Report Management Information Responsibility and then transaction reports. (Opens Oracle Discoverer 4i Viewer) > select either Period to date or Year to date and then select any department & and any period (date) and then apply parameters:
Error message in browser
This error (HTTP 400 Bad Request) means that Internet Explorer was able to connect to the web server, but the webpage could not be found because of a problem with the address.
For more information about HTTP errors, see Help.
Apache log shows:
error_log shows the following:
[Fri Jul 8 10:52:08 2011] [error] [client 10.180.225.5] mod_security: Access denied with code 400. Pattern match "!^([-_@|#!=A-Za-z0-9/ :.$/(/)]){0,255}([-_@|#!=A-Za-z0-9/ :.$]){0,255}$" at ARGS_NAMES. [hostname "loadbalancer.webdomain"] [uri "/discoverer4i/viewer"] [unique_id ThbTSAq0BRQAABrfK7M]
access_log shows the following:
IP ADDRESS - - [08/Jul/2011:10:51:39 +0100] "GET /disco4iv/html/images/shadow_bottom02_leading_ltr.gif HTTP/1.1" 200 861 0
IP ADDRESS - - [08/Jul/2011:10:51:39 +0100] "GET /disco4iv/html/images/seperator.gif HTTP/1.1" 200 42 0
IP ADDRESS - - [08/Jul/2011:10:51:39 +0100] "GET /disco4iv/html/images/arch_blue_bottom_ltr.gif HTTP/1.1" 200 984 0
10.180.225.5 - - [08/Jul/2011:10:51:39 +0100] "GET /disco4iv/html/images/white.gif HTTP/1.1" 200 37 0
IP ADDRESS - - [08/Jul/2011:10:51:39 +0100] "GET /disco4iv/html/images/bar_blue_leading_edge_middle_ltr.gif HTTP/1.1" 200 111 0
IP ADDRESS - - [08/Jul/2011:10:51:39 +0100] "GET /disco4iv/html/images/bar_blue_trailing_edge_middle_ltr.gif HTTP/1.1" 200 129 0
IP ADDRESS - - [08/Jul/2011:10:51:39 +0100] "GET /disco4iv/html/images/shadow_bottom_leading_edge_ltr.gif HTTP/1.1" 200 862 0
IP ADDRESS - - [08/Jul/2011:10:51:39 +0100] "GET /disco4iv/html/images/btopshadow.gif HTTP/1.1" 200 44 0
IP ADDRESS- - [08/Jul/2011:10:51:39 +0100] "GET /disco4iv/html/images/bshadow.gif HTTP/1.1" 200 59 0
IP ADDRESS - - [08/Jul/2011:10:52:08 +0100] "POST /discoverer4i/viewer HTTP/1.1" 400 227 0
I have tried to follow a number of metalink notes but unable to resolve this issue, metalink notes looked at are:
976473.1
389558.1
1313128.1 Patch 10324904 applied
394587.1
389558.1 Patch 5107107 applied
1143882.1
376992.1 Patch 3950067 applied
Any ideas or suggestions most welcome
Thank you
Regards
Arfan
Edited by: user1717313 on 08-Jul-2011 04:59

Hi JD
I have tried the steps i.e stop apps tier, run adconfig on apps tiers and then started services on apps tiers and can replicate the error
thanks
Arfan
Hi Helios
I checked note 1080465.1 Patch 9506302 has been applied & Recompile all Forms PLL files using adadmin.
I ran the sql feom the note, output below
SQL> select text from dba_source where name='FND_HELP' and line <3;
TEXT
package Fnd_Help AUTHID CURRENT_USER as
/* $Header: AFMLHLPS.pls 115.22 2009/10/12 12:56:58 nchiring ship $ */
package body FND_HELP as
/* $Header: AFMLHLPB.pls 115.115 2010/03/19 06:45:24 nchiring ship $ */
Thanks
Arfan
Edited by: user1717313 on 08-Jul-2011 05:04

How do I use infopath 2013 with visual studio 2013 to modify forms with code?

Dear all,
I am using sharepoint online and infopath 2013, I wonder how do I edit infopath 2013 forms with visual studio? When I try to edit form code it says I need visual studio 2012 and some other tools, I installed them and visual studio 2013, I wonder how
do I get rid of the message and start coding? Can someone provide a detailed procedure of doing so? I am having trouble with creating multiple items with single infopath form with repeating table on sharepoint online. Thanks.
Timothy

Hi,
According to your post, my understanding is that you want to create InfoPath form with code using Visual Studio.
More information about develop InfoPath form with Visual Studio:
http://msdn.microsoft.com/en-us/library/office/ee526362(v=office.15).aspx
http://msdn.microsoft.com/en-us/library/office/aa942693.aspx
For the second question, I suggest you can create another post , it will be easier for others to focus on one question in one thread.
Best regards

Office 2013 SP1 fails with code 17302 - SCCM 2007 R2

Hi,
I am trying to deploy Office 2013, along with SP1, in the following order:
1. Prompt to close all office apps and continue (vbs)
2. Installation of Office 2013, using modified msp.
3. Restart
4. Installation of SP1 with command line /passive /norestart.
I am doing this all through a package I created in SCCM 2007 R2.
The first few programs works well. However, when the installation of SP1 starts, SCCM launches the program, then SP1 fails with code 17302.
Manual installation, through command prompt, with the same switches works fine.
The error is only when remotely deploying.
The system is Windows 7 X86 with latest SP.
Please help!

Hi,
Have you checked the log file? Does it say anything there? Also, where is the SP1 installation file stored? Since this only happens while remotely deploying, check the network or the setting of your filewall.
By the way, you can slipstream Service Pack 1 with your Office 2013 installation media, Office 2013 will be directly installed at Service Pack 1 level, saving you the trouble of applying it afterwards. For the details, please refer to this article:
http://www.howto-outlook.com/otherprograms/slipstreamoffice2013sp.htm
(Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.)
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How to take backup of an entire module pool program with code,screen,etc.

Hi experts,
I have some important data in the ides server for which i want to take backup of them.
I have some question regarding the same.
1.How to take backup/download of an entire module pool program with code,screen,etc.
2.How can we take backup/download for a DB table with its structure?
3.How can we take backup of a search help?
Please give some suggestions abt the same.
Regards,
Ashesh.

Hi,
May be just for viewing, try downloading from SE80 transaction from the others option.
Here just try issuing the print, it will generate the spool.
Now using the spool, download to your desktop as required. It will have all the information regarding the attributes, fields, elements everything.
The only issue is, may be you need to take all the screens separately.
Regards,
Santhosh.

"ink system failure" error with code oxc19e0023 on a HP Photosmart Premium All-in-One Printer - C309

"ink system failure" error with code oxc19e0023 on have a HP Photosmart Premium All-in-One Printer - C309g - Have done all the resets and reseated the ink also tried replacing ink with new HP carts..getting frustrated please help
This question was solved.
View Solution.

Have you tried the steps outlined in this article:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03081973&cc=us&dlc=en&lc=en
If not give the steps a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

How do I create an object with code?

I have a flash cs3 file in which I have created a simple movieclip (square) by drawing a rectangle on the stage of that movieclip. When I drag that into another movieclip (clip) I am able to set properties for it such as x and y position by adding actionscript code to various frames of the "clip" timeline. So far so good.
Now I have created a second movieclip (shape). I want to be able to define the shape purely with code, so I entered the following code into the first frame of the "shape" timeline:
var myShape:Shape = new Shape();
myShape.graphics.beginFill(0xFF0000);
myShape.graphics.moveTo(20,20);
myShape.graphics.lineTo(100,20);
myShape.graphics.lineTo(100,100);
myShape.graphics.lineTo(20,20);
myShape.graphics.endFill();
this.addChild(myShape);
I then hoped I could drag and instance of the "shape" movieclip onto the "clip" stage and have a red triangle show up, but nothing shows up. It seems I have to actually draw something onto the "shape" stage for something to show up. I would like to be able to create shapes programmatically but I don;t know how to do it.
Thanks.

Thanks for your reply. I tried doing what you said, creating a command by opening a new flash file, etc. For some reason, I could make a rectangle and save that as a command, but making a shape using the polystar command didn't work - there was a red "x" next to it in the history panel.
Anyway, even if I could do that, it's not what I want to do. I want to be able to create a shape and then be able to change the shape dynamically. For instance, I want to be able to create a series of points and draw curves between them to create a closed curve shape. Then I want to be able to change the positions of the vertices so that the shape changes as the .swf is running. Thanks.

TI DSP Toolkit with Code Composer Platinum

Similar Messages

Maybe you are looking for