Time_dep master attributes not shown in transaction data report

My 'emp-ids' has timedependent attibutes.When I create the query from a ODS[ where emp-id is part of key] and drag the attributes. I do not see the attributes in report. I had a data-to and date-from as part of key fields for ODS. I choose range spanning different Years. I am expecting to see changes to attributes as well key figure info.I can see the KeyFig but not attributes.
The MAster data is loaded first and ODS later. Attributes are all set to be time-dependent and are navigational.
When I use the 'Key Date' feature of Query-Properties I can see emp-attributes that belong to only one of the date range,but Key figures are for all data ranges.
Shouldn't I be able to see attribute changes along with KeyFigures when I choose different date spans.

Hi,
Are the 'date-to' and 'date-from' infoobjects time-characteristicts type of infoobjects or a normal characteristic infoobject? (Time characateristics infoobjects are system provided ones eg 0CALDATE, 0CALMONTH).
If it is a normal custom defined characteristic (like any other CHAR.. infoobject) then BW will not be able to relate it with the time values of the master-data (even when you are filling these with date/time values, it is not known to the system as a time field) and result in this problem.
cheers,
Ajay

Similar Messages

Type2 SCD attributes not shown correctly across subject areas

User259188
March 21, 2012 2:04 AM
Type2 SCD attributes not shown correctly across subject areas
Hi,
The issue is that Type2 SCD attributes are showing the old value when used outside the domain of Type2 SCD dimension.
For example, if we try to display the value of Type2 SCD attribute from Contact dimension in Opportunities subject area we get the old value instead of current one.
The reason is that Revenue fact table which is used between Contact and Opportunities dimensions is keeping the old value of Contact ROW_WID.
Is there a suggested / recommended approach on how to solve this ?
Would adding the Contact INTEGRATION_ID in Revenue fact table and using it for join instead of ROW_WID, while filtering out on current flag be a best practice ?
Please advise
Boris

Hi Boris,
to understand how PR_CONTACT_WID is populated on the W_REVN_F, you must use Informatica (PowerCenter Designer) and view the backward link path.
You could see that PR_CONTACT_WID is search in the Lookup LKP_W_PARTY_PER_D_With_Geo_Wid (mapplet mplt_SIL_RevenueFact) :
- table W_PARTY_PER_D
- Query : SELECT
LOOKUP_TABLE.ROW_WID as ROW_WID,
LOOKUP_TABLE.GEO_WID as GEO_WID,
LOOKUP_TABLE.INTEGRATION_ID as INTEGRATION_ID,
LOOKUP_TABLE.DATASOURCE_NUM_ID as DATASOURCE_NUM_ID,
LOOKUP_TABLE.EFFECTIVE_FROM_DT as EFFECTIVE_FROM_DT,
LOOKUP_TABLE.EFFECTIVE_TO_DT as EFFECTIVE_TO_DT
FROM
W_PARTY_PER_D LOOKUP_TABLE, W_REVN_FS
WHERE W_REVN_FS.PR_CONTACT_ID = LOOKUP_TABLE.INTEGRATION_ID
AND W_REVN_FS.DATASOURCE_NUM_ID = LOOKUP_TABLE.DATASOURCE_NUM_ID
ORDER BY
LOOKUP_TABLE.DATASOURCE_NUM_ID,
LOOKUP_TABLE.INTEGRATION_ID,
LOOKUP_TABLE.EFFECTIVE_FROM_DT,
+LOOKUP_TABLE.EFFECTIVE_TO_DT --+
- Condition : EFFECTIVE_FROM_DT <= IN_DATE AND EFFECTIVE_TO_DT > IN_DATE
So your value for PR_CONTACT_WID is dependent of the value of IN_DATE ( --> IIF(ISNULL(CLOSE_DT), EXCH_DT, CLOSE_DT)).
You must verify for one record where you think there is an issue the CLOSE_DT and EXCH_DT on the table W_REVN_F (CLOSE_DT and U_RVN_EXCH_DT)
Hope it helps,
Benoît

Loading GL Master Data -- Attributes, Text, Hier ; and Transaction Data

Hi all,
Could any one give me the steps individually to load the following type of data in BI 7.0:
1. Master Data with Attributes
2. Master Data with Text
3. Master Data with Hierarchy
4. Transaction Data
Do I have to create the Transformation and DTP's individually to load all the above kind of Data?
Please give me the information as much as you can.
Thanks,

For master data when you create tranformation it will prompt infoobject to act as infoprovider, and then you create DTP to schedule data to it. It works fine with attribute and Texts, though hierarchy dosn;t support much features of 2004s at my side. Like i am not able to migrate Hierarchy datasource to 2004s, and even when i replicate it, it comes as 3.5 datasource only.
For transaction data follow Gokuls step, or try to find on forums you will get lot of discussion on it.

IW69 report not fetching all transaction data of current month.

Dear Guru Ji,
While doing testing IW69 report, i noticed that it is not displaying current month data. It is only get the data uptil last date of past month data in DEV & QA client.
I wonder why this is happening?
I tried using Malfunction start date & notification reference date input. But still the same result.
Please guide me, what is going wrong?

Hi,
The selection option 'notification date' is based on notification date (VIQMEL-QMDAT). Transaction IW69 is used to display notification items - when there is no item data in the notification nothing will be returned.
-Paul

Master Volume not shown?

I am creating a podcast, and just realized that the Master Volume is not shown anywhere on the console. Is it not available in podcast mode ... ??
[EDIT: Nevermind. I quit and restarted, and now I'm seeing it.]

Restart solved problem.

Data not shown in my Crystal report

Hi,
I have created a price list using crystal reports. My database is an excel spreadsheet. Everything works excep that some codes do not show up for some reason? I have a colum that is Manyfacturer number, and certain codes that are on in my database are not reflected in my CR report?
Can anyone help me?
Thanks
Vince

Hi Vince, Check to make sure the data is in Excel, also, if you have any joins at all, make sure they are the correct type.
check to make sure your select statement is not filtering something, I can give you a better answer, with a few more details.
Say, the line the data is missing on, is the whole line missing? is it part of the detail section or a group? if you sort this
data in excel, is there any missing data anywhere on the excel spreadsheet? any way, for a better answer, we will need more details.

Data is not available for Transaction Data Source 3EC_CS_1A,

0ECCS_C01 Transaction Data, Consolidation Technical Name: 0EC_CS_1
Based on DataSource: 3EC_CS1A
Thanks
Bhima
Message was edited by: Bhima Chandra Sekhar Guntla

Hi Bhima,
I have been working on this 3ES_CS_1A datasource for a while, still can't get it going even with the fiscal period input as instructed from your method below, I am wondering if I have missed anything else that are required as input. After entering the specific fiscal format then the "Errors occurred during the extraction
" error screen is prompted.
We are implementing BW 7.0, currently on SP09 with BI 7.0 content installed, I have generated all the datasources 3EC_CS_1, 3EC_CS_1A and R via T-Code "FCIWCU00 - Generate DataSources ".
Any help would be highly appreciated.
Cheers.

Kazakh characters not shown correctly in BO reports

Context :
While doing a project in KZ we make use of Business objects (BO XI R3 SP1) to generate reporting.
The language used for the reporting is Russian, but some client identification data of the company, which contains Kazakh characters, should be shown in the reports.
Problem :
KZ characters are not shown correctly in the BO reports (majority of time '?' is shown)
Details :
As I understand BO doesn't support the KZ language. We get the following message (CS : invalid native charset).
NLS_LANG : Russian : .CL8MSWIN1251 --> works
NLS_LANG : Kazakh : .CL8RK1048 --> not supported by BO. (This is though supported by the Oracle client and functions when we use SQL Plus)
Is there a workaround available to show KZ characters correctly in BO ?
Thanks

See my comments in this post:
client_get_file_name do not go to specified folder

Transactional Data Reporting (/SAPAPO/RLCDEL)

Dear All,
We are deleting stocks and other transactional data using the report /sapapo/rlcdel by location. However, we need to verify after deletion how many stocks and transactional data are there in APO system prior to deletion. Thus, we need to compare the data before and after deletion. Does anyone knows of any report we could use? Response are appreciated.
Regards,
Philip

Hi Philip,
If you are using the report RLCDEL in the background, you can check the spool for detailed info.
If you are running the report in the foreground, check the field Test Mode and execute. You will be shown how many data entries are going to be deleted. Click on the Delete button on the left to actually delete the entries.
regards,
biplab

GRPO not shown in Inventory Valuation report

Hi All
When I run Inventory Valuation report one of the GRPO is not shown in the report where other GRPOs are shown.
To the GRPO which is not shown Landed cost is added so in place of the GRPO landed cost document number is displayed with the same quantity and price which originallly entered in GRPO not shown. Is this normal system behaviour? Please reply
thanks
SV Reddy

Hi Sachin,
thanks for the reply,
But the Landed cost document value in the inventory valuation report is same as GRPO document value. When you add landed cost based on GRPO , in the valuation report it should show GRPO value + Landed cost right, but the system doesnt displya this? any other reason it could be?
thanks
SV Reddy

Special characters are not shown in compare document report in Acrobat X

Hi All,
I have a pdf document which is having some special characters like üὄ. Now I have updated the document with few corrections and while compare document in Acrobat X special characters are not shown in the report.
Can any one please look into this and give suggestion.

Hi Steve,
Thanks for your reply.
Platform - PC
Application - 3B2 and Acrobat 9
So far we have seen this kind of issue in only one document. In the below screenshot you can see 2 pdf files, the right side one is my MS pdf and the left side one is the exported pdf from 3B2 application both the files having the special characters such as . I just did the text comparison however both and is missing in the exported pdf but the reports shown the changes for characters only wherever the charactes is missing the report not shown the changes properly(See highlighted in yellow).
Please let me know if you need more deatails.

SAP_INFOCUBE_DESIGNS do not shown the current data

Hi guru's,
I have deleted all data from an InfoCube with the dimensions and the data from all the master data around the InfoCube.
But when I execute SAP_INFOCUBE_DESIGNS with the transaction SE38 I see that there are rows in the F-table and the dimensions.
How is this posible??
Greetings,
Raymond

Hi,
I think the data which you are looking at is not the actual data from Infocube but the statistics prepared by report SAP_INFOCUBE_DESIGNS.
We can use this report in many scenarios for e.g.
BW program SAP_INFOCUBE_DESIGNS can be used to see whether the dimensions in our cubes were over / under the recommended percentage of the fact table as recommended by SAP.
Regards,
Durgesh.

DQE - Business Object Attributes not shown

Hi,
can anybody please help me in solving the following problem.
I want to implement drag & relate for my EP 6 (sp13). I connected a sap crm system an imported some business objects from there (DRSPFLI and DRCARR).
When I now want to check the relations with the relations editor. The autocomplete function doesn't work and even if I want to edit the relation manually I have the problem that no attributes of the selected business objects are shown for selection.
Something seems to fail at the importing process of my business objects. (Hint: I can see the crm system in the metadata loader)
Has anyone a idea how to fix this problem?
thanx a lot
Christoph Hofmann

Hi,
unfortunately this didn't solve it.
The confusing is, that I see the System in the loaded DQE window at the metadata loader, but the corresponding business objects of this system appear without any parameters.
I have no idea what else to do!
christoph

Integrated Planning - Navigation attribute not shown for Planned figures

Hello,
I have created a Input ready query to get the actual figures from previous years and enabling users to enter the planned figures. I have created Planning functions to copy and revaluate.
Reg   Account    Actual         Planned
US         123000     $3000         $4000
US         124200     $5000         $6000
I have one more report where it shows the Actual & Plan comparision.
In the Actual & Plan comparision report I have an additional Navigational attribute SIC code to be shown for each account.
My Actual & Plan comparision report should ideally be seen like below.
Reg   Account    SIC Actual         Planned
US         123000      3026         $3000         $4000
US         124200      4325         $5000         $6000
But it is showing as below where it has # for Planned figures and it shows blank.
Reg   Account     SIC   Actual         Planned
US         123000      3026         $3000         <blank>
US         123000      #              <blank>       $4000
US         124200      4325         $5000          <blank>
US         124200      #              <blank>        $6000
SIC Code is a navigational attribute of account. What changes do I have to do to make the SIC code to be shown for planned figures.
Any help would be highly appreciated and rewared.
Regards,
KK

I figured it out. I didnt assign the navigation attribute to the plan cube in the multiprovider. Thanks!!
Edited by: KK on Feb 19, 2008 10:12 PM

Last Transaction Date Report

hi
I'm trying to run a report in order to audit our database of suppliers (over 1000) (supplier records managed in symmetry)
I need to see against every supplier the last date that we paid them so that I can identify the ones not used in the last 2yrs and disable them.
the closest report I'm getting is one that shows every payment date for every supplier and is so large that I'm running out of space in excel when exporting the report.
Any advice on what items to select and parameters to set in order to get this report would be much appreciated!!!!!

My suggestion is to use the vendors table (PO_VENDORS) and the checks table (AP_CHECKS_ALL). Bring in vendor id, vendor name, and check date. Use a Last_Value function on check date to return the last check date for the vendor. See if that might work out. Or if having trouble with that, define the join in the business area between the vendors table and the checks table to be an outer join on detail, that will return master rows with no detail and master rows with matching detail. Take out check date from the format and add sum of amount to the format. Then edit for a check date (say >= '01-Jan-2008') that if you don't have any activity for after that date, then you want to get rid of those vendors. Run the workbook and any vendor with no activity will show as a NULL value for sum of check amounts (so have to add Amount(SUM) from the checks table to the workbook item list). Vendors with activity after that check date will show a numeric amount (might be 0 if in and out). You can then add a condition to filter for amount IS NULL and get the list of vendors that you want to look at disabling. Worked like a charm when I tested that here.
John Dickey
Edited by: John Dickey, McCarthy on Nov 3, 2009 12:13 PM
Edited by: John Dickey, McCarthy on Nov 3, 2009 12:19 PM
Edited by: John Dickey, McCarthy on Nov 3, 2009 12:22 PM

Time_dep master attributes not shown in transaction data report

Similar Messages

Maybe you are looking for