Time dependent attribute

hi experts
  what are the tables created for time dependent attribute?
  and for normal attributes what are table created?
puli

hi,
For attributes /BIC/P<Tech name of info object>,Q,X,Y.
P-time independent attributes
Q-time dependent attributes
X - SID links of Charcteristics and Time independent Navigational attribute
Y-SID links of Charcteristics and Time dependent Navigational attribute
Ramesh

Similar Messages

  • How to use a time dependent attribute as a replacementh path in a Bex

    Hi  friends,
    Does anyone know if it is possible to use time dependent attribute as a replacementh path inside the Bex Query .
    For example in master data  I heve like following records
                           material  value    date from                   date to
                               AA       12        01.01.2000               01.01.2002
                               AA        15       02.01.2002                01.01.2005
    And on transaction if I have data like
    material callday             salesquantity
    AA         01.04.2000           50
    AA         01.055.2004         100
    I want a report output like
    material       Calculated value
    AA              2100( 50*12  + 100 * 15 )
    Thanks for helps 
    Regards
    Erkan

    Thanks for your reply Anil ,
    We are using the progress that you mention at the moment , but sometimes data needs some corrections on factors which had been loaded inside the cube. It is not possible to correct those values inside the Cube later. So I need a solution on time dependent attribute with replacementh path . Then it will be available for corrections on master data .
    Regards
    Erkan

  • User exit for time dependent attribute

    Hello,
    In My InfoObject some of the attributes are time dependent and some are not.
    I’m trying to enhance the time dependant attribute and can’t find the fields ‘date to’ and ‘date from’ in the transfer structure of the start routine. I also couldn’t find the time dependent fields – only the fields in the /BI0/P table appears….
    Where can I find the fields of the /BI0/Q table (=Time-Ind fields) ?
    Please help,
    David

    Hi,
    well normally you see the time independant data in the /bix/p- table and the time dependant data in the /bix/q- table. If you want to see both use the /bix/m- view.
    kind regards
    Siggi

  • How to remove time dependent attributes from 0VENDOR- Please help

    Hi All,
    As part of master data enhancement, I had added some time dependent attributes to Vendor Master object. After activating, the respective time dependent tables were all created/activated.
    Now due to change of requirements, when I am trying to convert the time dependent attributes to non time dependent, I keep getting the activation error because it keeps giving a message "Unable to change the primary key" for MVENDOR. This view is getting the DATETO field because of the original activation. It is not removing that field and is causing the issues.
    Even if I adjust/delete the QVENDOR table in SE14 and then try to activate 0VENDOR, it is still retaining the DATETO field in the MVENDOR view and is recreating the QVENDOR table.
    I even tried to delete the time-dependent fields from the 0VENDOR (instead of just de-selecting the time dependent flag)...it is saving the changes..but giving activation error.
    Is it not possible to delete the time dependent attributes from the Master data...once they are added ?
    Please advice.
    Any help with this will be greatly greatly appreciated.
    At this point 0VENDOR is in inactive state.

    Hi Friends,
    First of all, sorry I did not get a chance to respond earlier. There was an issue with my p/w for some strange reason and could not log back in till today.
    Also, thank you for all your suggestions.
    However, the issue is now fixed. Basically I had already explored and tried every option suggested int his forum, but was still having issues.
    The problem was that there was another table in the system that had a reference to this Master Data table field (as a foreign key). After I removed the foreign key referece in the other table, then it let me proceed further.
    Thanks again..

  • Time dependent attribute getting blank

    Hi Friends,
                        we've got infoobject "0CFM_SEC_ID" which has got time dependent attributes, actually the data upto PSA is available perfectly, and all data getting populated except for the time dependent attribute "Act. Traded Date", this is getting blank, no data is getting populated to this time dependent attribute,
    as fas as tranformations are concerned, they are ok, then what might be the reason?
    Regards,
    BalajiReddy K.

    Hello,
    i have the same Problem. After the Release update from ECC 5.0 to ECC 6.0 and BW 3.5 to BI 7.0 i activated the DataSource 0CFM_CLASS_MASTER_DATA_ATTR with the new available attributes. I also replicate DS and defined the update rules in the BW. But the load (also RSA3 in source system) shows no values for time dependent attributes.
    After posting a OSS note i got the solution:
    The enhanced DataSource 0CFM_CLASS_MASTER_DATA_ATTR with time-dependent attributes is combined whit some customizing settings. The Flag in View FTI_BI_V_SWITCH have to be set to use the new extraction method with time-dependent attributes. See notes: 1410617, 1087663, 1290259. For more information look at F1 Help of Flag-Field in View FTI_BI_V_SWITCH.
    If you don't set the Flag, the DataSource works with the old extraction method and the new available fields continue empty.
    best regards!
    Edited by: Daniel Tejado on Mar 2, 2010 1:33 PM

  • About reading time-dependent attribute

    hi experts,
    i wanna read attribute from master data and the attribute is time-dependent, the transformation's rule detail is :
    Source Fields:
    0DATETO
    0UC_POD
    Target Fields:
    0UC_POD_EXT
    from attrib. of: 0UC_POD
    0UC_POD_EXT is a time-dependent attribute of 0UC_POD
    and the time setting is End frm 0CALDAY
    my question is:
    in my source fields, there is no field name 0calday, and i don't quite understand what the options (start, end, frm) mean, would u explain in detail for me?

    Hi,
    Date InfoObject for reading master data on demand:
    The attribute you want to read is time-dependent.
    Before you specify the time range, add a time characteristic to the rule. This must be one of the following SAP time characteristics: 0CALDAY, 0CALWEEK, 0CALMONTH, 0CALQUARTER, 0CALYEAR. To do so, choose  Add Source Fields in the Source Fields of Rule area and then select a time characteristic.
    Note the following when you define the key date: If you select Start , the first calendar date of the specified period is used; if you select End, the last date is used. If it is the date time characteristic (0CALDAY), it does not matter if you select Start or End.

  • The report  span   time-dependent  attribute

    A  infoObject 's attribute is  time-dependent  , for example  Attribute B
    is time-dependent ,
    1000-01-01 To 2006-12-30   B  value   'Plant 1'
    2007-01-01 To 2007-12-30   B  value   'Plant 2'
    2008-01-01 To 9999-12-31   B  value   'Plant 3'
    I want to show my report from 2005001 - 2009001 , It will need to
    choose a key date , but if I do that , for example , I choose the
    key date  2007-02-01 . The data  before  2007-02-01 will not show , I
    know it's right in tech view , but users can't  understand . So how can I
    show my data freely.
    Reed Lei .

    Hi Reed,
    Yes, that's a limitation (or not) of time-dependant attributes. You can only show time-dependant attributes based on one key date.
    Hope this helps.
    Regards,
    Diego

  • Time Dependent Attributes for 0UCINSTALLA

    Hello BI experts,
    I have one question regardning time dependent attributes for Installation InfoObject (0UCINSTALLA) that are loaded from DSO (0UCS_DS06).
    My Installation InfoObject has 3 time dependent attributes:
    - ZGSP_ID
    - ZPROF_CL (Profile Class)
    - ZDUALFUEL (Flag for Dual Fuel installation)
    EXAMPLE:
    UCINSTALLA     DATEFROM     DATETO       ZGSP_ID     ZPROF_CL     ZDUALFUEL
    1                        01.01.1000      31.03.2009      _A              3                        X                
    1                        01.04.2009      31.05.2009      _B              3                        X                
    1                        01.06.2009      31.12.9999      _B              3                                        
    In the DSO it is represented by following entreis:
    UCINSTALLA     DATEFROM     DATETO           OPERAND      CHARVAL
    1                        01.01.1000      31.03.2009      ZGSP_ID             _A
    1                        01.04.2009      31.12.9999      ZGSP_ID             _B
    1                        01.01.1000      31.05.2009      ZDUALFUEL         X
    1                        01.06.2009      31.12.9999      ZDUALFUEL      null
    1                        01.01.1000      31.12.9999      ZPROF_CL           3
    The lines that contain ZGSP_ID as openard should populate ZGDS_ID field, lines with ZDUALFUEL operand populate ZDUALFUEL attribute, etc
    How can I map in one transformation? I believe this has to be done in ABAP, but it would be rather difficult to manipulate dates:
    - when first record is processed Start Routine has to browse for all other lines in the DSO for the same installation and split the record into 2 or more depending when other attributes are valid.
    At the same time one record have to be split into multiple records (when valiity dates for three attributes don't match), and multiple records have to be merged (for intervals when all attributes are valid).
    One alternative is to load these three attributes from three separate DSOs - then BI will take care of dates by itself. But this is a bit nasty solution.
    Could you kindly please advise if there is any simple way of doing this logic?
    Kind regards,
    Roman Pikuzinski

    HI,
    If your data source contains dates such as start date and end date, then you can map them to 0DATEFROM and 0DATETO respectively. In that case the 0DATEFROM and 0DATETO take the values from the data source and split up.
    For eg. if the start date is 05/25/2010 and end date is 12/31/2010, then now in your info provider you will have three records-
    0DATEFROM  0DATETO
    01/01/1900     05/24/2010
    05/25/2010     12/31/2010
    01/01/2011      12/31/9999
    However if you do not want to map any field from the data source to these attributes then they take the system generated values - 01/01/1900 and 12/31/9999 respectively.
    Hope this helps in the understanding.
    Thanks,
    Rahul

  • Different dates for 2 Time Dependent Attributes

    I've got 1 time dependent attribute (TD1) within a query.  When executed, the query asks for a key date to be applied on this time dependent attribute.
    We've been asked to enhance our model adding a new time dependent attribute (TD2).
    Everything is OK so far.
    The problem arises when our user needs to enter a date for TD1 and a different date for TD2, as in the same query only one key date can be used.
    We're thinking about adding a Key Virtual Figure, but we know it makes the performance down. The cube is huge.
    Any other suggestions to sort this out?
    Thank you!

    Hi,
    The provided standard datasources for these don't have the valid date fields, so wouldn't you have to  enhance them after the config from R3?
    What an alternative way of doing the time dependent if ther R3 analysts won't change their config?
    Is this common practice and done often?

  • Time-Dependent Attribute & most recent active value

    Hello experts,
    How can you show in your report the most recent value of an attribute. It is now showing the first value it encounters.
    I need it to show the value which is valid at this moment in time.
    That's the whole point of time-dependant, but I can't figure out how to do it.
    Any input is highly appreciated.
    Naoki

    hi,
    in query edit mode, click 'query properties', choose button 'values' beside the key date box, tab 'variable', choose the variable 0DAT - current calendar date, or just type in &0DAT& to the box.
    http://help.sap.com/saphelp_nw04s/helpdata/en/07/0ab63c71f41d5ce10000000a114084/frameset.htm
    Message was edited by: A.H.P

  • Measures differing if we drill down by time-dependent Attributes

    Hi Everyone,
    I am having 2 similar reports,one based on a Cube and other based on a Multi Provider.
    The data is being fed into these two InfoProviders,from exactly same sources.
    Now,if I display the measure(eg. Invoice spend),in both the reports based on the above two InfoProviders,the overall Invoice spend matches across both the reports.
    But if we drill down by a characteristic(eg. BU- Low or BU-High) they differ.But by drilling down by any other characteristic they matches.
    I have found out,that the nav. attributes(BU- Low and BU- High) are checked "time dependent".
    While the others,for which the result is matching are not.
    Can this be a possible reason for the mentioned anomaly?Or can there be some other reason to this difference?
    Thanks,
    Brinto.

    Hi Chinnapa,
        Just want one clarification here.
    take one example.
    if you have loaded data on 10th April, then date range is 10th april to 30th april.
    then you are loading data on 11th april, at that time you want date range 11th april to 30th april.
    So what will happen to 10th april data? what range? 10th to 10th?

  • Master data time dependant attribute in query for several dates

    Hello all,
    I need to create a query to display prices for a material in different periods. 
    The user will enter a period interval.  For each period, they want to know the material price the last day of that period.
    Material price is a time-dependat attribute of material, and I created one formula variable to display it. The problem is the using the key-date of the query only works for a date, but not for severals.
    Is there any other way to do it?
    If not, the only solution I find is to have in the infoprovider the prices that I need, but I don't think this is a good practice.
    Any suggestions?
    Thanks!

    I have just seen something: in fact the created lines are:
    Key1   Compound1   fromdate    todate    attr1      attr2
    0001      L      01.01.1000      01.01.2006          <empty
    so as you can see, the right interval is created but the attributes are not up to date.
    Cheers.
    Cyril.

  • Loading Time Dependent attributes

    Ok, Im trying to figure out the best way to import time-dependent TO and FROM fields from a legacy system.  Obviously, the legacy system does not have these fields so I would like to generate them myself the best way possible.  The situation is that master data gets uploaded every day, and only 1 field in that master data is time-dependent (a marker field, 0 or 1, true or false).
    What dates should I generate whenever updating the TO and FROM field of that time-dependent field?  Would the TO field always contain 12.31.9999 and if so, what happens if the same key data row gets updated the following day, would I have to make a script to update that previous TO field so that it contains the new data row's date, and the FROM field of the new data row? Then, of course place 12.31.9999 in the new row's TO field?
    Is this the correct method, if so, that's alot of work to do for the transfer rules.  Doesn't SAP generate these TO and FROM fields as that time-dependent field is updated with a new value?
    Since this is not coming from SAP R/3, it gets kind of complicated.

    Hi,  You are on the right track.  All you should have to do is populate the from date with the current date and the to date with 12.31.9999.   The system will take care of the rest.  If after time you end up with many time dependant entries that have the same characteristic values you can resoganize the master data and again the system will rearrange the date ranges for you.
    Good Luck and please assign points if you feel this helps you out...
    Thanks,
    Ken Murray

  • Navigational attribute issue-time dependent

    Hi all,
    I am working with 0PA_C01, I included some additional navigational attribute(time dependent )to 0employee, but when i am checking all these navigational attribute at cube level or Report  , i can find only the latest values ,for eg i added  Designation as a time dependent navigational attribute for 0employee, and the designation for a employee is changing after 12.2008 from VP to SVP ,at the cube   and also in the report  i can find only the latest designation for all the calmonth ie before 12.2008 also  as SVP .
    I checked  the the time dependent Navigational attribute option to make designation as a time dependent navigational attribute ,and also ran the attribute change run .
    Can anyone suggest some information to fix it?
    Thanks
    Sandhya

    Dear Sandya,
    Results correct only in your report. Time dependent attributes displyas data based on keydate. if no key date specified, system takes current date as key date and displays data.
    So in your case latest data displaying. If you want to see any historic designations, you need to specify key date, which shold fall into that particular range.
    Create a User entry variable for keydate and use.
    Key date
    Each query has a key date. For time-dependent data, the key date determines the time for which the data is selected.  The default key date value is the date on which the query is executed, that is <Today>.
           1.      Click on the Key Date field. A dialog box with a calendar appears for you to select your key date.
           2.      Select a date from the calendar. If you select 01.01.1999 for example, time-dependent data is read from the 01.01.1999.
    Note
    The key date applies only to time-dependent data.
    Check: [Query Properties|http://help.sap.com/saphelp_nw04/Helpdata/EN/07/0ab63c71f41d5ce10000000a114084/frameset.htm]
    Srini

  • Monthly Report with time-dependent navigational attribute

    Hi,
    We've a characteristic costcenter that has a navigational attribute called segment which is time-dependent attribute.
    CostCenter-Segment master data is as follows.
    COSTCENTER Segment          validFrom  Valid To
    ============================================
    CSTCNTER_1 SGMNT_A       10000101   20100831
    CSTCNTER_1 SGMNT_B       20100901   99991231
    Cube data is as follows. We don't have Segment in the cube. Also, no plans of adding segment to the cube.
    COSTCENTER MONTH  AMOUNT
    ========================
    CSTCNTER_1 201007  100
    CSTCNTER_1 201008  200
    CSTCNTER_1 201009  300
    CSTCNTER_1 201010  400
    I'm trying to achieve monthly report by costcenter & segment as follows. Is there a way to achieve this?
    COSTCENTER Segment MONTH  AMOUNT
    ===============================
    CSTCNTER_1 SGMNT_A 201007  100          (last day of 201007 is 20100731.  as of 20100731, CSTCNTER_1 belongs to SGMNT_A)
    CSTCNTER_1 SGMNT_A 201008  200          (last day of 201008 is 20100831.  as of 20100831, CSTCNTER_1 belongs to SGMNT_A)
    CSTCNTER_1 SGMNT_B 201009  300          (last day of 201009 is 20100930.  as of 20100930, CSTCNTER_1 belongs to SGMNT_B)
    CSTCNTER_1 SGMNT_B 201010  400          (last day of 201010 is 20101031.  as of 20101031, CSTCNTER_1 belongs to SGMNT_B)
    Appreciate any help.
    -hari

    thanks for looking into this.
    I"ve already turned on SEGMENT as a navigational attribue in cube, for the reason, my current report looks like this.
    COSTCENTER Segment MONTH  AMOUNT
    ===============================
    CSTCNTER_1 SGMNT_A 201007  100
    CSTCNTER_1 SGMNT_A 201008  200
    CSTCNTER_1 SGMNT_A 201009  300                           I'm expecting this should show up in SGMNT_B
    CSTCNTER_1 SGMNT_A 201010  400                           I'm expecting this should show up in SGMNT_B
    But, I'm expecting the report look like this
    COSTCENTER Segment MONTH  AMOUNT
    ===============================
    CSTCNTER_1 SGMNT_A 201007  100
    CSTCNTER_1 SGMNT_A 201008  200
    CSTCNTER_1 SGMNT_B 201009  300
    CSTCNTER_1 SGMNT_B 201010  400

Maybe you are looking for