Time limit Exceeded in SM58

Hi ,
I have a file to ido scenario.The file size is suppose to be big (atmost 5mb).I am getting the following error in SM58
Time limit Exceeded .
I am able to see my idocs in idx5.
Kindly help

HI,
Check the below links may be useful
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/43e3b690-0201-0010-c582-deedc80fa6bb
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f078394a-4469-2910-c4bf-853c75674694
Regards
Chilla

Similar Messages

Time limit Exceeded problem

Hi ,
I have a file to idoc scenario .
I have a file which generates many idocs (size atmost 5 mb)
I am aware sap recommends to limit the message the file size to atmost 5mb.
Do they mean file size of the payload ...because size increases in xi also .
I just want to process such a file quickly .
For that I am employing queue priortization at both sender and reciever .
and would idoc packaging help at the receiver .
Besides I am getting 'time limit exceeded in sm58' although I am seeing my idocs in idx5.
Here are some of the things I have checked ..
1) Parameters in SXMB_ADM - Integration Eningine configuration ---Specific configuration ...tried various tuning parameters ...but it didn't work..
2) In partner profile in recieving CRM system made chagend the setting from trigger immediately ..to background Task ...
(I am not certain how far that is relevant .
If it is a problem with CRM system's ability to accept mass idocs (because a small number is acceptible ...under 1mb file size ) then seetings should in crm so that large number idocs get succesfully posted .
I have posted this issue several times ...Kindlyhelp
KIndly what parameters i should tweak in xi or that matter recieving crm system to take care of this problem.
Kindly help

HI,
Large size of file processing
In general, an extra sizing for XI memory consumption is not required. The total memory of the SAP Web Application Server
should be sufficient except in the case of large messages (>1MB).
To determine the memory consumption for processing large messages, you can use the following rules of thumb:
Allocate 3 MB per process (for example, the number of parallel messages per second may be an indicator)
Allocate 4 kB per 1kB of message size in the asynchronous case or 9 kB per 1kB message size in the synchronous case
Example: asynchronous concurrent processing of 10 messages with a size of 1MB requires 70 MB of memory
(3MB + 4 * 1MB) * 10 = 70 MB With mapping or content-based routing where an internal representation of the message payload
may be necessary, the memory requirements can be much higher (possibly exceeding 20 kBytes per 1kByte
message, depending on the type of mapping).
The size of the largest message thus depends mainly on the size of the available main memory. On a normal 32Bit operating system, there is an upper boundary of approximately 1.5 to 2 GByte per process, limiting the respective largest message size.
please check these links..
/community [original link is broken]:///people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
Input Flat File Size Determination
/people/shabarish.vijayakumar/blog/2006/04/03/xi-in-the-role-of-a-ftp
data packet size - load from flat file
How to upload a file of very huge size on to server.
Regards
Chilla

PI 7.0: IDOCs struck in IDX5 with error "Time Limit Exceeded".

Hi All,
We have a File to IDOC scenario in PI 7.0. After mapping the IDOCs are posted from PI to ECC System.
On a normal day this interface works good, yesterday we received a huge file which resulted in the creation of about 25000 IDOCs from one single file. The mapping went fine, however the IDOCs created were not posted into ECC System. When we monitor the IDOCs using transaction code IDX5 in PI system, we found the error message as "Time limit exceeded", the user shown was "PIAFUSER". To overcome this error, we increased the time limit of PIAFUSER from default to about 1500 seconds.
Now, I want to push these IDOCs from PI into ECC System. Could you please let us know, how to push these IDOCs sitting in PI system to ECC?
We do not want to reprocess the file from the beginning. Please let us know if it is possible to push the IDOCs without processing the file? If yes, how to reprocess?
Thanks in advance.
Regards,
Manohar Dubbaka.

Hi,
the help documentation is as follows:
Check the tRFC Status
Use
tRFC calls which transfer IDocs use the function module IDOC_INBOUND_ASYNCHRONOUS at reception (before release 4.0: INBOUND_IDOC_PROCESS).
If an IDoc in the sending system has been passed to tRFC (IDoc status "03"), but has not yet been input in the receiving system, this means that the tRFC call has not yet been executed.
Activities
To check the status of the tRFC calls, choose Tools ® IDoc Interface/ALE ® Administration ® Monitoring ® Troubleshooting ® RFC Queue (SM58) and specify any additional selection criteria.
The program RSARFCEX restarts unsuccessful tRFC calls.
You cannot choose the option is being executed in background processing.
Best Regards,
Erik Hubers

TRFC Time limit exceeded issue

We have issue about the TFC time limit exceeded. We have a third partner application which will call a HTTP service to our SAP, let's call the HTTP service as Z_submit_request, in Z_submit_request, we call RFC Z_process_request in IN BACKGROUND TASK, but we received a Time limit exceeded issue in SM58. Could anyone help to answer why we get this issue?
Thanks a lot!

RFC's are executed in dialog tasks, which have an upper limit for the allowed runtime. This can be set for profile parameter rdisp/max_wprun_time. You might want to check the profile parameter (or ask the basis folks) if it has the default value (or another reasonable value). Most likely though I'd say you should look into the actual RFC and see if you can improve the performance of Z_PROCESS_REQUEST, so that the timeout doesn't occur.

RFC_ERROR_SYSTEM_FAILURE: Time limit exceeded. Connection Pool - JCO api

Hi Everyone
My Connection Pool parameters JCO api.
client=300
user=SISGERAL_RFC
passwd=******
ashost=14.29.3.120
sysnr=00
size=10
I have these parameters on my Connection Pool and sometimes appear these wrongs in my application:
1.
2006-01-07 13:20:37,414 ERROR com.tel.webapp.framework.SAPDataSource - ##### Time limit exceeded. LOCALIZED MESSAGE = Time limit exceeded. KEY = RFC_ERROR_SYSTEM_FAILURE GROUP = 104 TOSTRING = com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Time limit exceeded.
2.
2006-01-07 14:01:31,007 ERROR com.tel.webapp.framework.SapPoolConnectionManager - Timeout
Id like to know if is happening.
Are there something wrong with my connection pool?
What can be happening?
Thanks

Raghu,
Thanks for your response.
Yes, the pool connections are in place according to the sAP note mentioned above.
Regards,
Faisal

Short dump "Time limit exceeded" when searching for Business Transactions

Hello Experts,
We migrated from SAP CRM 5.2 to SAP CRM 7.0. After migration, our business transaction search (quotation, sales order, service order, contract etc) ends with the short dump "Time limit exceeded" in class CL_CRM_REPORT_ACC_DYNAMIC, method DATABASE_ACCESS. The select query is triggered from line 5 of this method.
Number of Records:
CRMD_ORDERADM_H: 5,115,675
CRMD_ORDER_INDEX: 74,615,914
We have done these so far, but the performance is still either poor or times out.
1. DB team checked the ORACLE parameters and confirmed they are fine. They also checked the health of indices in table CRMD_ORDER_INDEX and indices are healthy
2. Created additional indices on CRMD_ORDERADM_H and CRMD_ORDER_INDEX. After the creation of indices, some of the searches(without any criteria) work. But it takes more than a minute to fetch 1 or 2 records
3. An ST05 trace confirmed that the selection on CRMD_ORDER_INDEX takes the most time. It takes about 103 seconds to fetch 2 records (max hits + 1)
4. If we specify search parameters, say for example a date or status, then again we get a short dump with the message "Time limit exceeded".
5. Observed that only if a matching index is available for the WHERE clause, the results are returned (albeit slowly). In the absence of an index, we get the dump.
6. Searched for notes and there are no notes that could help us.
Any idea what is causing this issue and what we can do to resolve this?
Regards,
Bala

Hi Michael,
Thanks. Yes we considered the note 1527039. None of the three scenarios mentioned in the note helped us. But we ran CRM_INDEX_REBUILD to check if the table CRMD_ORDER_INDEX had a problem. That did not help us either.
The business users told us that they mostly search using the date fields or Object ID. We did not have any problem with search by Object ID. So we created additional indices to support search using the date fields.
Regards,
Bala

Error while running query "time limit exceeding"

while running a query getting error "time limit exceeding".plz help.

hi devi,
use the following links
queries taking long time to run
Query taking too long
with hopes
Raja Singh

TIME LIMIT EXCEEDED ERROR WHILE EXECUTING DTP

Hi gurus,
I Have got an error while executing
The errors are as follows.
1.Time limit exceeded. No return of the split processes
2.Background process BCTL_DK9MC0C2QM5GWRM68I1I99HZL terminated due to missing confirmation
3.Resource error. No batch process available. Process terminated
Note: Iam not executing the DTP as a back ground job.
As it is of higher priority the answers Asap Is appreciated.
Regards
Amar.

Hi,
how is it possible to execute a DTP in dialog process. In my mind it is only possible for debugging...
In "Display Data Transfer Process" -> "Goto" -> "Settings for Batch Manger" you can edit settings like Number of Processes or Job Class.
Additional take a look at table RSBATCHPARALLEL and
http://help.sap.com/saphelp_nw04s/helpdata/en/42/f29aa933321a61e10000000a422035/frameset.htm
Regards
Andreas

Time Limit exceeded while running in RSA3

Hi BW Experts,
I am trying to pull 1 lakh data from CRM to BI System.
Before scheduling, i am trying to execute in RSA3.I am getting the error message as "Time Limit Exceeded".
Pls suggest, why it is happening like this.
Thanks in advance.
Thanks,
Ram.

Hi,
because huge data with in the stipulated time it is not executing and showing the all records ,so it is better to go any selection option by each document type or some else then u can add all the documents ,anyway in bw side we r running this job in background so no problem.if u want see all records at a time then u can discuss with ur basis people to extend the time for that.
Thanks & Regards
sathish

Time limit exceeded error

Hello All,
I am trying to execute a custom program with a variant, but I receive the Time limit exceeded error [TIME_OUT].
I am now trying to analyse why this error has occurred as I am a beginner. Any help shall be greatly appreciated.
Regards,
Arpita.
Moderator message: Welcome to SCN!
Moderator message: Please Read before Posting in the Performance and Tuning Forum
Edited by: Thomas Zloch on Oct 20, 2011 2:01 PM

Hi Ramya,
Your prog running in the back ground, so the time limit of the prog is exceded. Go to sm37 see the prog running time if exceded correct the time.
Regards
Srinu

Time Limit exceeded error in R & R queue

Hi,
We are getting Time limit exceeded error in the R & R queue when we try to extract the data for a site.
The error is happening with the message SALESDOCGEN_O_W. It is observed that whenever, the timelimit error is encountered, the possible solution is to run the job in the background. But in this case, is there any possibility to run the particular subscription for sales document in the background.
Any pointers on this would be of great help.
Thanks in advance,
Regards,
Rasmi.

Hi Rasmi
I suppose that the usual answer would be to increase the timeout for the R&R queue.
We have increased the timeout on ours to 60 mins and that takes care of just about everything.
The other thing to check would be the volume of data that is going to each site for SALESDOCGEN_O_W. These are pretty big BDOCs and the sales force will not thank you for huge contranns time
If you have a subscription for sales documents by business patrner, then it is worth seeing if the business partner subscription could be made more intelligent to fit your needs
Regards
James

Time Limit exceeded error in ALV report

I am gettting error "Time Limit Exceeded" when i execute ALV report. Can i run the program in background and how to do that?. I had already optimized my query in the program but even then i am facing the same issue.

You can process the alv in background by pressing F9...I guess that the output would be available as a spool in SP01.
You may need to re-check your query...And also, review the alv catalog and any events you are using....
Greetings,
Blag.

Time Limit Exceeded while executing Proxy Program

Hi all,
we are frequently facing Time Limit Exceeded problem in R/3 system while exceuting proxy program for large payloads (appx 5-7 MB). Sometimes we are able to successfully restart the message and sometimes we have to delete these messages. How can we resolve this issue.
Thanks,
Mayank

hi Joerg,
we are getting this error in inbound queue in R/3 system, also this is a async call, so no chance of any communication interruption b/w SAP systems. From PI system, message is succeccfully passed to R/3 system & Time Limit Exceeded is coming in R/3 system inboud queue (SMQ2). Is it poosible that timeout will happen within R/3 system.
Thanks,
Mayank

Time Limit exceeded Error while updating huge number of records in MARC

Hi experts,
I have a interface requirement in which third party system will send a big file say.. 3 to 4MB file into SAP. in proxy we
used BAPI BAPI_MATERIAL_SAVEDATA to save the material/plant data. Now, because of huge amount of data the SAP Queues are
getting blocked and causing the time limit exceeded issues. As the BAPI can update single material at time, it will be called as many materials
as we want to update.
Below is the part of code in my proxy
Call the BAPI update the safety stock Value.
    CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
      EXPORTING
        headdata                    = gs_headdata
        CLIENTDATA                  =
        CLIENTDATAX                 =
       plantdata                   = gs_plantdata
       plantdatax                  = gs_plantdatax
       IMPORTING
          return              = ls_return.
    IF ls_return-type <> 'S'.
      CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
      MOVE ls_return-message TO lv_message.
Populate the error table and process next record.
      CALL METHOD me->populate_error
        EXPORTING
          message = lv_message.
      CONTINUE.
    ENDIF.
Can any one please let me know what could be the best possible approach for this issue.
Thanks in Advance,
Jitender
Hi experts,
I have a interface requirement in which third party system will send a big file say.. 3 to 4MB file into SAP. in proxy we
used BAPI BAPI_MATERIAL_SAVEDATA to save the material/plant data. Now, because of huge amount of data the SAP Queues are
getting blocked and causing the time limit exceeded issues. As the BAPI can update single material at time, it will be called as many materials
as we want to update.
Below is the part of code in my proxy
Call the BAPI update the safety stock Value.
    CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
      EXPORTING
        headdata                    = gs_headdata
        CLIENTDATA                  =
        CLIENTDATAX                 =
       plantdata                   = gs_plantdata
       plantdatax                  = gs_plantdatax
       IMPORTING
          return              = ls_return.
    IF ls_return-type <> 'S'.
      CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
      MOVE ls_return-message TO lv_message.
Populate the error table and process next record.
      CALL METHOD me->populate_error
        EXPORTING
          message = lv_message.
      CONTINUE.
    ENDIF.
Can any one please let me know what could be the best possible approach for this issue.
Thanks in Advance,
Jitender

Hi Raju,
Use the following routine to get fiscal year/period using calday.
*Data definition:
DATA: l_Arg1 TYPE RSFISCPER ,
      l_Arg2 TYPE RSFO_DATE ,
      l_Arg3 TYPE T009B-PERIV .
*Calculation:
l_Arg2 = TRAN_STRUCTURE-POST_DATE. (<b> This is the date that u have to give</b>)
l_Arg3 = 'V3'.
CALL METHOD CL_RSAR_FUNCTION=>DATE_FISCPER(
EXPORTING I_DATE = l_Arg2
            I_PER = l_Arg3
IMPORTING E_FISCPER = l_Arg1 ).
RESULT = l_Arg1 .
Hope it will sove ur problem....!
Please Assign points.......
Best Regards,
SG

Time Limit Exceeded in File - java- IDOC

Hello,
I have an interface which reads a text file in XI and uses a java mapping to produce IDOCs in an R3 system synchronously, the interface was running fine for more than 2 years . Since the text file is larger than 20 MB, we are splitting into small text files (2mb each) for easier processing. While processing, each file will hold the outbound queue (SMQ2) until it gets completed. after 2 years of using this interface, it started giving errors in the queue (Time Limit Exceeded) for files larger than 1mb.
Any hint ??

Swarup,
increasing the RFC adapter time out from the visual admin has solve the problem,
thank you for that.
but what I was looking for is a way to find out what could be the root cause, since it was running 2 years with (300000 ms time out) without a problem. Now I must increase this time out which mean my system is not performing well!
Agasthuri,
as I mentioned, it was running fine with 2mb, now even 1mb cannot be proccessed,
Thanks again.

Time limit Exceeded in SM58

Similar Messages

Maybe you are looking for