Time Machine error message: Backup Failed!! ???

I've been using Time Machine with an external 500GB Western Digital HD, and everything was going well, including TM deleting old files to make room for new ones. Then a few days ago, I started getting error messages, saying that the TM backup failed. Of course, it didn't say "WHY" or "WHAT" happened. I guess it's a new TM game - Guess why it didn't work?
No remedies were suggested - just the bad news - and now it's every time TM does its hourly backup!
Any suggestions or help is appreciated.
Thanks!
Ron...

Go into TM preferences and select the Change Disk button. Select None as the disk. Close the TM Preference and then open them again and reselect your original back up disk. TM should find it again and should do a valid backup.
Hope this helps.
David

Similar Messages

TS1550 My time capsule will not back up. There is a time machine error message that states "The backup disk image "/volumes/Backup/Jane's MacBook Pro.sparsebundle" is already in use. How do I correct this problem?

My time machine will not back up. I get a Time Machine Error message that reads: "The backup disk image "/Volumes/Backup/(myname)'sMacBook Pro.sparsebundle" is already in use.
I have not been able to back up for two weeks, I think this occurred after an update to the operating system, but I am unsure.
How do I correct this problem?

Have you tried restarting the computer? Also, see Time Machine Error from this pages sidebar under More Like This.

Time Machine Error This backup is too large for the backup disk

Hi, I have a 1TB Time Capsule which backs up my Mac. I was having some issues with my mac so I decided to perform an erase and install and then use Migration Assistant to transfer everything back to my Mac.
After I reinstalled Snow Leopard and restored my Mac using Migration Assistant, Time Machine says that the backup has failed. It says " Time Machine Error This backup is too large for the backup disk. The Backup requires 663 GB but only 255 GB are available.
What do I do? Is my only option to erase my Time Capsule and have it back everything up from scratch?

Hi, thanks for the help. I erased everything off of the Time Capsule and it's backing up my Mac from scratch. It's almost finished backing up my whole mac. It's now at 641.86gb of 646.54gb but it's now backing up very slowly. It's backing up .1 every few minutes. Is this normal?
Here's the log from Time Machine Buddy:
Starting standard backup
Attempting to mount network destination using URL: afp://Stuart%[email protected]/Time%20Capsule
Mounted network destination using URL: afp://Stuart%[email protected]/Time%20Capsule
Creating disk image /Volumes/Time Capsule/StuartsMacPro.sparsebundle
QUICKCHECK ONLY; FILESYSTEM CLEAN
Disk image /Volumes/Time Capsule/StuartsMacPro.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Ownership is disabled on the backup destination volume. Enabling.
Detected system migration from: /Volumes/My Book
Backup content size: 850.0 GB excluded items size: 606.5 GB for volume Stuart's Drive
Backup content size: 425.9 GB excluded items size: 67.3 GB for volume Macintosh HD
No pre-backup thinning needed: 722.56 GB requested (including padding), 928.68 GB available
Waiting for index to be ready (101)
Copied 28.3 GB of 602.1 GB, 29340 of 1478089 items
Copied 55.0 GB of 602.1 GB, 41596 of 1478089 items
Copied 82.9 GB of 602.1 GB, 55899 of 1478089 items
Copied 110.7 GB of 602.1 GB, 63347 of 1478089 items
Copied 138.8 GB of 602.1 GB, 83831 of 1478089 items
Copied 166.8 GB of 602.1 GB, 94574 of 1478089 items
Copied 194.7 GB of 602.1 GB, 102854 of 1478089 items
Copied 222.8 GB of 602.1 GB, 114388 of 1478089 items
Copied 129159 files (242.5 GB) from volume Stuart's Drive.
Copied 248.4 GB of 602.1 GB, 130414 of 1478089 items
Copied 265.5 GB of 602.1 GB, 355699 of 1478089 items
Copied 293.6 GB of 602.1 GB, 382912 of 1478089 items
Copied 322.1 GB of 602.1 GB, 387974 of 1478089 items
Copied 349.8 GB of 602.1 GB, 399204 of 1478089 items
Copied 378.3 GB of 602.1 GB, 399358 of 1478089 items
Copied 406.9 GB of 602.1 GB, 399441 of 1478089 items
Copied 434.5 GB of 602.1 GB, 415817 of 1478089 items
Copied 461.5 GB of 602.1 GB, 471528 of 1478089 items
Copied 488.2 GB of 602.1 GB, 537277 of 1478089 items
Copied 515.1 GB of 602.1 GB, 580446 of 1478089 items
Copied 541.3 GB of 602.1 GB, 590386 of 1478089 items
Copied 566.8 GB of 602.1 GB, 602496 of 1478089 items
Copied 593.3 GB of 602.1 GB, 649575 of 1
Message was edited by: Stuart Lawrence
Message was edited by: Stuart Lawrence

"Time Machine Error The backup volume is read only"

Lately, every time I try to backup to my Time Capsule using Time Machine it fails and I get a message saying "Time Machine Error The backup volume is read only. To select a different volume, open system preferences and choose Time Machine" So I do that and I see the Time capsule listed. I don't want to select anything but the Time Capsule, cuz what else do I have, right? Am I wrong in assuming the "backup volume" is the Time Capsule? Anyway, I have tried changing the permissions on the time capsule, but when I get the "get info" box for the time capsule, there is not an option to change those settings, they are grayed out. Every thing worked well for about a week and then this started. My backup volume must have been "Read & Write" at first, because I can see what was backed up when I open Time Machine. Anybody have a clue what's going on? How can I make the back up volume "Read & Write" again and why did it change to "Read Only?"

Nope, I am using the same passwords as ever, both users have the same password, BTW. The password I gave to the Time Capsule is different, tho, but that password is for the wireless aspect of the Time Capsule, so that wouldn't have anything to do with it, would it?
I also get a message box that says "Disk Repair The disk "Backup of XXX's Computer" was not repairable by this computer, it is being made available to you with limited functionality. You must back up your data and reformat the disk as soon as possible." This box appears in conjunction with the appearance of the Norton's virus scan box scanning the time capsule.

Time Machine Error Messages-HELP!!

I purchased a Time Machine a few months ago and it worked for a little while. Now I just receive error messages: "Time Machine Error The backup disk image could not be mounted" and "The storage location for Time Machine backups can't be found". I can't figure this out. I have restarted the Time Machine, I tried reconfiguring it several times and still it is not accessing the backups or creating backups. It is only allowing me to connect to the internet. Can I fix this problem?

I have exactly the same problem. I'm running the latest firmware from both Time Capsule as well as Time Machine.
Could you please tell me if your problem was resolved and if yes, how?
Thanks.

Time Machine Error Message: "sparsbundle could not be accessed (error-1)

hi,
I am running snow leopard on my iMac and have a mac mini connected via ethernet running Mac Leopard Server version 10.6.
I backed up my iMac onto my Mac Leopard Server using Time Machine about a year ago and then I turned it off and haven't done it since. I turned it on today and was attempting to back it up, but I keep getting the following Time Machine Error Message: "sparsbundle could not be accessed (error-1) when i try backing it up.
Any thoughts on why and how to fix this? I can access my server via screen share, so i know its accessible and I can get online with it as well, so its connected to the Internet.
Any ideas?
Thanks,
Josh

jnp1 wrote:
not backing up yet, but more progress than before...now its on an infinite loop of "preparing" and "scanning"...just keeps doing that over and over...but never actually backs anything up.
Anything in the log files on either the client or the server?
Usually, when Time Machine is being flaky, the easiest solution is just to delete the backup and start a new one. Since you have a server, you could just move that sparsebundle file elsewhere instead of deleting it. That is, of course, assuming you can still open it. If not, then it doesn't matter because that backup is toast.

Time Machine Error: "The backup disk image could not be created." Help.

I have two Macbook Pro's. One is able to backup to the Time Capsule with no problems. The other connects just fine to Airport Utility, but I get the following error after I attempt to backup: Time Machine Error: "The backup disk image could not be created."
I have reset the Time Capsule several times, so that is not the fix.
The first thing I see when attempting to open Time Machine is the following message: :The storage location for Time Machine Backups can't be found." It gives me the option to setup the Time Capsule, which I select. The next thing I select is to Change Disk. The window that opens has the Icon with Three people on it. The name of that Icon is The Moreman Time Capsule. I select it, and enter the password I created. I then choose to Backup. Then I choose to backup now. That is when I get the error: Time Machine Error: "The backup disk image could not be created."
Any ideas? Has anyone encountered this problem?

You have to delete the .dmg file and start over. This happened to me 3 times already, I finally switched to Déjà Vu, works perfect and only once a day instead of 24 times a day.
http://propagandaprod.com/

Time Machine error "The backup disk could not be found"

I use Time Capsule with Time Machine, Lion OS and manage to setup successfully. However after I on it for few hours, there is backup error. Time Machine error message "The backup disk could not be found." But the internet wifi is working normally.
To solve this issue I have to power off and on it again, then the disk can be detected. But after few hours same thing happen again.
Is it a hardware faulty or sometime that cause the Time Capusle harddisk to sleep after sometime?

I have this exact same problem. When I restart the Time Capsule I can then start backups normally, but it requires manual intervention. That's dissapointing because Time Machine and Time Capsule are supposed to be an automatic, worry free backup. I have to restart the Time Capsule frequently. Annoyed.

HT3275 TIME MACHINE ERROR: The backup disk image "/Volumes/Data/Sean McGuire's MacBook Pro.sparsebundle" could not be created (error 1).

I can select a disk (Time Capsule) and initiate the backup. It only "waits to back up" then "making backup disk available" and remains frozen there. I tried to update the software a while back and was unsuccessful, I think that may be the issue.
Any insight would be greatly appreciated. This is the error message I receive.
TIME MACHINE ERROR: The backup disk image “/Volumes/Data/Sean McGuire’s MacBook Pro.sparsebundle” could not be created (error 1).
Thanks

See #C17 in Pondini's excellent support document Time Machine - Troubleshooting
http://pondini.org/TM/Troubleshooting.html

Time Machine Error - No Backup Volume Has Been Selected

Just got the time capsule. Successfully had it replace old Airport Extreme setting. Successfully hooked it up via Ethernet to my iMac and completed a backup. Now I have it hooked up via Ethernet to my MBP. But I can't get it to backup
The Time Capsule disk mounts and I can see the files in it from my iMac backup. I'm connected to the Airport network.
In Time Machine preferences, it asks me to choose a backup disk. I select the time capsule. I turn the switch to on. And nothing happens. With the iMac, the backup started immediately.
After a minute, I get this error message:
Time Machine Error
No backup volume has been selected.
To select a backup volume, open System Preferences and choose Time Machine.
Obviously, I have done this, but the Time Machine never turns on.
I have spent thirty minutes messing with this.
And suddenly, as I writing the post, and the error message comes up again, and I click Preferences, it switches to Preferences and suddenly, the backup starts.
Go figure.

I had the same problem, though I have a non-conventional setup. My Time Machine volume is on a linux box shared with netatalk. Looking in the system log I was receiving, "System Preferences[295]: FSMountServerVolumeSync received error: -36". It turned out that the problem was with Little Snitch. Another post I found stated that Little Snitch was interfering with Time Machine's authentication when it was mounting the TM volume. Turning off Little Snitch fixed the problem. Seemed that simply rebuilding the Little Snitch rule list fixed the problems I experienced.

I have not been able to back up for2 days. Time machine error message: /Volumes/Data/David's MacBook Air.sparsebundle" is already in use.

I have not been able to back up for2 days. Time machine error message: /Volumes/Data/David’s MacBook Air.sparsebundle” is already in use.
What now?
Macbook Air.
Was working fine for the past year until now.

See more like this on the right.. this is the most common error reported here since mountain lion came out..
Or read C12.. http://pondini.org/TM/Troubleshooting.html
Or just restart the whole network.. in right order from off.. modem.. router / TC.. clients 2min gap.

HT3275 Time Machine Error: The backup disk image "Volumes/Data/My Macbook Pro.sparsebundle" is already in use. (How do I correct this issue?)

Time Machine did not back up:
Time Machine Error; ("The backup disk image "/Volumes/Data/My MacBook Pro.sparsebundle" is already in use.")
How do I correct this issue?
Thanks!

You need to be careful Bob.. people might take this literally.
Bob Timmons wrote:
How do I correct this issue?
Call the exterminator to get rid of the bugs in Lion and Mountain Lion.
https://discussions.apple.com/thread/5222487?tstart=0

I am running 10.7.5 and getting Time Machine error The backup disk image "/Volumes/Data/Kathy P's MacBook.sparsebundle" is already in use. what do i do now?

i am running 10.7.5 on an older MacBook and getting Time Machine error The backup disk image “/Volumes/Data/Kathy P’s MacBook.sparsebundle” is already in use. what do i do now?

See Pondini's TM FAQs, for starters.

TS1550 Error message: Backup Failed. However if the startup disk permissions are repaired one only backup will succeed before the permissions are again repaired. How is this to be fixed?

Error message: Backup Failed. However if the startup disk permissions are repaired one backup will succeed before the permissions are again repaired. How is this to be fixed?

Hi,
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
Then Repair the backup Disk... any change?

I can't connect to Time Capsule- error message: Backup disk is not available. Was working fine before.

I can't connect to Time Capsule- error message: Backup disk is not available. Was working fine before.

Restart it.. Does this all the time with Lion and even worse ML.
Restart the whole network if that doesn't work.. do it in correct order.. from off.. modem.. TC.. clients 2min gap.

Time Machine error message: Backup Failed!! ???

Similar Messages

Maybe you are looking for