Time machine tried to clear my hard drive and I chose "NO" yet hard drive is now showing no files but shows space is still used?
yesterday morning I was working and a window randomly popped up for time machine. I don't have the exact wording that was on the pop up window because I assumed it wasn't spam as it was asking me to choose a place to store my time machine backup. I've never seen this window before but just a couple week ago I was having storage problems and hae tried to fix them by clearing some files. So I assumed this window was about helping clear some space on the computer. So I chose my silver hard drive to use for the backup for time machine. 20 min later I get another pop up that is asking me if I'm sure I want to choose my silver hard drive as it will erase anything that is currently on the drive - I immediately panicked and chose "NO" for it to not use the hard drive. I assumed I was in the clear at this point. But I didn't check the drive until later yestsrday evening and now the folder is empty when I open the drive. Yet when I check the space available on the drive it shows over 400G that's taken and 600+G that's available which means the files I had on there are still there but I can't see them? Where have they gone? And was this time machine pop up window spam? I opened my time machine and it was turned off?
Choose Go to Folder from the Finder's Go menu and provide /Volumes/ as the path.
(71792)
Similar Messages
-
If I choose a hard drive ask my backup disk for time machine, will it clear out the data that was previously stored in my hard drive?
Hello edjhsu,
Unless the drive is in a format that isn't compatible with Time Machine, the files will not be overrwitten. However it is typically a better idea to keep your files and your backup separate, especially since files on the Time Machine drive will not be backed up by Time Machine.
Mac Basics: Time Machine backs up your Mac
http://support.apple.com/kb/HT1427
Cheers,
Allen -
Hard drive packed up, but had Time Machine backup. I installed new ssd and upgraded to Mountain Lion, but I can't find iPhoto library and photos or iTunes songs? Is there an answer to this? A backup run did not install either photos or songs. Graham
Thanks so much but none of that helped. It was driving me crazy because it would back up another external drive. I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
Thank you for your help and replying to this. Guess I made my own issue! -
How can I force Time Machine to make a complete backup of my Hard Drive. I just installed a new external drive for Backup since my previous one failed. Now when I back up, Time Machine only backs up my data folder and the Users folder.
When I start a backup. Time Machine says "Oldest Backup: None; Latest Backup: None", so it seems like it should do a complete backup, but it only does a partial.Hi I'd like to jump in here. Your app showed me this:
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 749.3 GB Disk used: 453.81 GB
Destinations:
Plastic Wrapper [Local] (Last used)
Total size: 999.86 GB
Total number of backups: 64
Oldest backup: 2013-07-24 23:25:11 +0000
Last backup: 2013-11-17 01:40:47 +0000
Size of backup disk: Too small
Backup size 999.86 GB < (Disk used 453.81 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
/sbin excluded from backup!
/usr excluded from backup!
/System excluded from backup!
/bin excluded from backup!
/private excluded from backup!
/Library excluded from backup!
/Applications excluded from backup!
Aside from the size of my backup drive, which I will increase at some point, I'd really like to have time machine backing up all system folders, especially Applications. How to I reset this hidden exclusions?
Thanks,
Darcy -
What is the best USB powered portable 1TB hard drive for a macbook pro that allows Time machine to work, windows (thru Parallels software) and mac storage and is available in Australia?
I agree with teh OWC sggestion above, but why must it be USB powered? I find that far more unreliable, and the low power devices slow.
I'd frankly get a good external enclosure and buy a bare drive. But the OWC stuff is quite good - vastly better than some of the majors (WD being aprime example of stuff that's boderline quality and often not compatible)
Grant -
I am running Lion 10.7.2 and I have an external drive hooked to my time machine. I can't rename folders and when trying, I get an error code 8076. The checkbox "ignore permissions for this device" does not show on volume info. Help please???
The TIme Machine volume does not have that checkbox.
I think the issue is with your Finder...
Go to Finder "Go" menu hold the option key and choose Library. Then go to Preferences trash these files:
com.apple.finder.plist
com.apple.sidebarlists.plist
Then, restart, or log out and in again.
(You will have to reset a few finder prefs the way you like them.) -
My time machine 3 TB HD was encryption enabled and it took forever. I tried reformattiing, it is online, but, get this Partition map repair failed while adjusting structures to fit current whole disk size. Any comments appreciated.
This issue has been in discussion (actively) since last August here:
https://discussions.apple.com/thread/4218970?start=0&tstart=0
After months and months of new reports, it's pretty clear that this is an Apple Mountain Lion problem and one that Apple needs to address. As one frsutrated user noted :
>>There is no consistent solution for a user. Apple has to supply it. All you can do is submit a bug report to
>> http://www.apple.com/feedback
Please, if you are encountering this problem you will save yourself a lot of wasted time and energey simple by joining me and others in asking Apple to fix this problem: Make a bug report.
Thanks! -
How do I have itunes use/detect my external hard drive and place music on the external drive from the itunes store? There are no music files on my pc yet. I will like to do this after installing itunes 11 on my pc for the first time. I am using windows 7. HP computer intel Dual Core. Thanks for any help!
Hey idw3,
Welcome to Apple Support Communities, and thanks for the question. Follow the instructions on this article to move your iTunes Media folder to an external hard drive:
iTunes for Windows: Moving your iTunes Media folder
http://support.apple.com/kb/HT1364
Regards,
David -
I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error... Help!!
If you have installed a new hard drive , you will need to have formatted it in Disk Utility correctly. This may explain your problem.
Boot into your 10.6 Install disk again at the top menubar > Utilities > select Disk utility and in there select your new hard drive, and select the tab Erase and choose to make the format as Mac OS Extended Journaled. When that is finished look in the main window to make sure that the partition map scheme says GUID Partition Table.
Now go to the Restore tab and reinstall from your backup. -
Hello,
Thank you for taking a look at my problem. My Windows computer crashed so I removed the hard drive and installed it into a hard drive enclosure and connected it to my new Windows computer with a USB cord. I installed Mozilla Thunderbird on my new computer and read the different tutorials on this website for extracting data from the external hard drive and installing it on my new computer however I cannot seem to be able to find the files that I need and quite frankly I do not know how to move them once I do find them. I even tried MozBackup but it could not find the files either. I searched for profiles.ini in the hard drive and the only hit I got was a profiles.ini file that was 111 bytes in size. I assumed that this was not what I was looking for but I did save a copy on my desktop. If someone has experience with moving files from a hard drive to a new computer I would be grateful for the help.
Thanks,
ANlets get with the program. Mozbackup is useless in this situation because it looks for your profile in the location Thunderbird says it is.
You biggest hurdle is probably setting windows to show system and hidden files. The %appdata% folders are hidden by windows. -
Trying to move my iTunes Music and other media from the main drive on my pc to an external hard drive but iTunes is not recognizing the new file location? Ideas?
Hello there, Underwriter.
The following Knowledge Base article provides in-depth instructions on how to migrate your content to an external drive:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Particularly of note for your situation:
External drive
This option requires more work than Home Sharing, but it creates a backup of your iTunes library on the external drive in addition to moving your content.
Notes before you start:
You can use most iPods as an external drive.
Windows operating systems don't recognize Mac OS-formatted disks (HFS or HFS Plus formats). Because of this, you can't use a Mac-formatted iPod or external drive to move your music to a Windows PC. See iPod: How to determine iPod's hard disk format if you're not sure how your iPod is formatted.
Mac OS X can read Windows-formatted iPods and drives. This means there are many ways to migrate your information from your old Windows-based PC to your new Mac.
Mac OS X: To be sure external drives appear on your desktop, choose Preferences from the Finder menu. Be sure the options for "External disks" and "Hard disks" are enabled.
Part 1: Locating and consolidating the iTunes Media folder
Part 2: Copy iTunes folder from the old computer:
Part 3: Get iTunes ready on your new computer
Part 4: Back up any music that's already on your new computer
Part 5: Copy music to your new computer
Part 6: Add preexisting music that was on the new computer back into the library
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
When my time machine tries to backup to my time capsule I get the following message"The backup disk image “/Volumes/Data/Kent’s MacBook Pro.sparsebundle” is already in use. " What do I need to do to fix this?
Restart the Time Capsule.
-
I keep getting this error message: Time Machine could not complete the backup. 'The backup disk image "/Volumes/FreeAgent Drive/xxx MacBook Pro.sparsebundle" is already in use.
How do I remedy this so it starts backing up again?Maybe this http://web.me.com/pondini/Time_Machine/C12.html can help you.
Stefan -
I am getting this error when time machine tries to back up to a time capsule. "The backup disk image “/Volumes/JUDY ARCENEAUX's Time Capsu-1/JUDY ARCENEAUX’s MacBook Air.sparsebundle” is already in use." Same time capsule has worked in the past.
First, restart the computer and the Time Capsule. In most of the cases, this should solve the problem.
If it doesn't work, see > http://pondini.org/TM/C12.html -
Time Capsule loses connection when Time Machine tries to back up
Hi,
I am trying to do my first back up using Time Machine but seems there is a problem.
I connect to the internet using cable, which I connect to the Time Capsule. I use it as my router as well and configure my wireless network just fine. When Time Machine tries to connect and do a back up it disconnects everything and I have to umplug everything, reset the Time Capsule sometimes to be able to get the iMac to find it again (netwerk stops working as well)
Please let me know if you need more info to be able to help me out.
ThanksI have experienced that myself and I've not found a reason or solution to it yet.
I also read somewhere that the Time Machine software can continue with the backup after an interruption. If that's the case, this may be a minor inconvenience.
Regards
Maybe you are looking for
-
I've been reading forums all day and just can't figure out the best settings I should use when downconverting my 1080i 1440x1080 HDV footage down to 720x486 SD to mix into a SD sequence in FCP. I've tried compressor and keep getting horrible results.
-
Hi all, Requirement: I wnat to send the output of the smatfrom thruogh email. May be we can do it by doing the required settings in SCOT w/o wrting any code. Query: What I want to know is the details about the specific things that I need to do in SCO
-
i have 20 Text fileds in my form and this may vary when the database data is changed so i want to use index property to that. how can i achive in the staruts i have declared in struts-config.xml as my property <form-property name="captionId" type="ja
-
Sharing wireless connection with another powerbook g4...
i've got airport expressed configured with my g4 and it works fine. however, my chum with another g4 clicks the name from the pull down window, enters the password (the one that Is the right one because it's in my keychain), and yet gets a wrong pass
-
&P_Year - is it an APEX variable?
Hello Folks I am working on a query generated by a person who no longer works with us. In this query, he was consistently using a variable '&P_Year'. Each time I try to compile the code, I get an error ORA01008 - A SQL statement containing substituti