Time Machine won't recognise my Dlink DNS323 RAID device for storage

Hi, can someone help me with this issue. For some reason Time Machine won't recognise my Dlink DNS 323 RAID NAS device. I have mapped the device in Finder, so I know my Macbook can see it and read it, but Time Machine can't. Does TM support NAS devices? Do I have to set up the Dlink in some special manner? Let me know! Thanks!

Kubismo wrote:
Hi, can someone help me with this issue. For some reason Time Machine won't recognise my Dlink DNS 323 RAID NAS device. I have mapped the device in Finder, so I know my Macbook can see it and read it, but Time Machine can't. Does TM support NAS devices?
the only officially supported NAS for TM backups is Time Capsule. there are hacks to make other NASes work with TM but they are just that - hacks. use at your own risk.
http://www.macosxhints.com/article.php?story=20080420211034137&query=time%2Bmach ine%2BNAS
Do I have to set up the Dlink in some special manner? Let me know! Thanks!
Message was edited by: V.K.

Similar Messages

Time machine will not recognise WD hard drive connected to AE

I have a WD hard drive connected to my AE by ethernet cable. While I can access this drive wirelessly via Finder, both Airport utility and Time machine do not recognise this drive for back up purposes. Is there any way I can change the setup to enable time machine to work?
Thanks - Eric

You might want to take a look at the macosxhints.com article "10.5: Set up Time Machine on a NAS in three easy steps ".
BTW, MobileMe won't be able to backup your entire hard drive.

After installing Mountain Lion, my Time Machine won't back up ... says the sparsebundle is in use

After installing Mountain Lion, my Time Machine won't back up ... says the sparsebundle is in use

Standard problem in ML.. apple do not seem to want to recognise.
Reboot the TC .. if that fails restart the whole network in correct order.. modem.. router/TC... clients.. with 2min gap.
There are other suggestions like changing the password.. all they do is the same as reboot.
Read C12.. most quoted Q in pondini website history. This is asked 10 times a day.
http://pondini.org/TM/FAQ.html
Here is another way to get a useful utility in ML.. rather than toyland version.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

New MBP and Time Machine won't let me search out my NAS to save too. Any ideas?

When trying to set up time machine and using a NAS drive in my wireless network Time Machine won't let me search and select the storage device. I can access the storage and save/retrieve files so I can see and use it. Anyone got any ideas please?
Brand New MBP running Mavericks.

I'm having the same issue with Mavericks - and it appears to be Mavericks specific. I don't have this problem with Mountain Lion. Mountain Lion can see both of my NAS drives.
Additionally, with Mavericks Time Machine won't see your backup properly. It may only see the most recent backup. Though in my case it wouldn't load either one (I had two on different drives). To recover some files I had to use a machine running Mountain Lion to mount a backup file then I was able to extract the files to a USB drive, which I then moved to the Mavericks machine.
I've tried using terminal to run tmutil commands without luck. I have mounted the volume I want to use - it shows when I do "ls -l /Volumes". Then when I do sudo tmutil setdestination /Volumes/VOLUMENAME the system seems to go into an infinite loop. I have to ^c to get back to terminal.
Clearly with Time Machine on Mavericke Apple has really screwed the pooch.
MacBook Pro 2.3GHz i7 with DVD drive and standard resolution display.

I bought a new external hard drive for backups, but time machine won't do a full back up. I think it is remembering backing up onto previous external hard drives, which I don't own anymore. How do I do a new full backup?

I bought a new external hard drive for backups, but time machine won't do a full back up.
I think it is remembering backing up onto previous external hard drives, which I don't own anymore. How do I do a new full backup?
When I bought the new (used) iMac, I also bought an external hard drive for backups. It worked fine, but my husband stole it.
Then I bought a new external hard drive (Seagate) and it worked fine for three weeks, then died.
So I just got a new external hard drive, which was put together from an internal hard drive and a hard drive enclosure.
Time machine did the first backup today, and it should have taken 9 hours like it did on the previous first time full back up. Instead, it took 30 minutes. That can't be right. I want to start over and do a full backup to make sure everything gets onto my new external hard drive, but I can't figure out how to do that. Please help.

Triple-click anywhere in the line below to select it:
tmutil compare -E
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
At the end of the output, you’ll get some lines like the following:
Added:
Removed:
Changed:
These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.

Time MAchine won't back up due to not enough space, but there is

TIme Machine won't back up. Displays this:
Actual capacity of the external backup drive is 999.68 GB and available is 135 gb .
The imac internal HD capacity is 999.01GB and used space is 636.321 GB.
This problem has occured periodically in the last 12 months or so, so prior to OS version10.8 install in Jul 2012.
I previously called AppleCare, as I have a contract, and tech said I just need to reformat the external drive and start over.
I did that the last time this happened a few months ago, but I don't like that option, as it eliminates all the prior backups,
What if I needed to try to recover something I deleted 3 weeks ago, for example. I couldn't do so as all backups would have been deleted, of course, by me having refomatted the drive and basically starting over. Also, I noted in another post about a person having a problem due to using a partitioned drive. Mine is not partition, as far as I can tell. See this:
Any ideas? Thanks

The solution is essentially "simple." You need a larger hard drive for these backups or you need to use a different backup solution. By this I mean using backup software that does not preserve an archive of old copies of a file, but simply erases old copies in order to replace them with the new copies. By replacing your backup drive can always accommodate the drive it backs up if it is large enough - say the same size. I can suggest:
Backup Software Recommendations
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
Synk Pro
Tri-Backup
Others may be found at VersionTracker or MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.
All of the above are capable of being scheduled. Synk Pro makes immediate backups of any changed file on the hard drive. You may configure it to archive changes (like Time Machine) or to delete prior copies.

Time Machine won't back up after system restore

I just restored my system after a failure, and now Time Machine won't back up my hard drive. It gets about 40 out of 90 Gigabytes done, and then gives me an error message that just says that there was an error while backing up, and doesn't give any other information. I ran a Verify Disk with Disk Utility, and there is nothing wrong with the backup drive, and there is more than 200 Gigabytes of space left on that drive.
Thank You.

zhoffmanster wrote:
Ok, so here's the thing: I tried backing up again today, and it worked just fine. Before, what would happen is a message would pop saying "an error has occurred during backup" (or something close to that). The point is, the message didn't give any detail.
No, the point is, you seem to have ignored this:
See the Time Machine - Troubleshooting post at the top of this forum.

Time Machine won't back up external drive to Time Capsule

I recently got a Time Capsule, and successfully set it up to back up my iMac's primary drive, but for some reason Time Machine won't back up my external drive to the Time Capsule.
I removed the external drive from the exclusion list in System Preferences > Time Machine > Options, and from what I've read this should be sufficient to make Time Machine back up the drive.
The external drive is connected to my iMac via Thunderbolt > Thunderbolt-to-Firewire adaptor > Firewire 800 input, and the Time Capsule is connected via Ethernet to my LAN.
Since I'm using Ethernet, I've disabled Wi-Fi on the Time Capusule by going to AirPort Utility > My Time Capsule > Edit > Wireless > Network Mode > Off.
The reason I believe the external drive is not being backed up is because when I click the Time Machine icon in the upper-right status bar and choose "Enter Time Machine", none of the folders on external drive show any older versions.
Furthermore, when I click Finder > Time Machine Backups > Backups.backupdb, I can see only one sub-folder which has the name of my iMac's primary drive. I can't see any equivalent folder for my external drive.
Any idea what I'm doing wrong?

I don't see anything you have done wrong.. perhaps it does backup in a different way.
Load the widget.. A1 here... http://pondini.org/TM/Troubleshooting.html
That will allow you to track the log of TM to see what it is doing.
I would also try rebooting the computer.. exclude the drive again.. reboot.. and remove the exclusion.
You should be able to check the actual settings of TM in plist file.
And you can do a full reset of TM as well.. See A4. Check what is in the file. Pondini lists the location for you.
Nothing surprises me with Mountain Lion ...!!

Time machine won't backup, yet plenty of space & not much used on Mac HD

Well, this is yet another "Time machine won't backup becuase there is not enough space" thread. I have searched Google and threads here but it's still a mystery why this error is occurring and it seems there is no clear solution. I also looked at the Apple Time Machine errors FAQ as well.
Here are my specs and what I have tried so far.
2010 Mac Pro Quad Core with 1 TB hard drive with 12 GB RAM. (137 GB used so far on internal Mac hard drive disk, so about 863 GB free space).
- New external 1 TB hard drive initialized as Time Machine backup disk when inserted for the first time.
The exact error I am getting is this: "This backup is too large for the backup disk. The backup requires 1.80 TB but only 999.20 GB are available."
I have tried deleting the Time Machine system preference, reinitializing the external disk, clearing the system caches with Cocktail, restarting and letting Time machine ask me all over again if I wanted to use the external drive for Time Machine. Still the same error.
My question is how on earth can 1.80 TB be required for the backup when I only have 137 GB of used space?

danomatic12 wrote:
My question is how on earth can 1.80 TB be required for the backup when I only have 137 GB of used space?
Two possibilities:
There's another disk (or disks) connected to your Mac. If they're formatted HFS+, Time Machine is trying to back it/them up as well. You can exclude them per #10 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum). The 1.8 TB includes 20% for temporary workspace on the TM drive, so TM is estimating the backup at about 1.5 TB.
Something on your internal HD is corrupted, causing an incorrect calculation. Verify your internal HD, per #6 in [Formatting, Partitioning, Verifying, and Repairing Disks|http://web.me.com/pondini/AppleTips/DU.html] (or use the link in *User Tips* at the top of the +Using Snow Leopard+ forum).

Time Machine disk not recognised

My G5 PowerMac has been away for repair; it's needed a new logic board. It was away for nearly two weeks. Now Time Machine doesn't recognise the external drive which contains the Time Machine backups from last November. It wants to do a backup from scratch and says there isn't enough space on the disk.
Is there any way of getting the Time Machine to recognise the previous backups and start adding to them?
I'll be very grateful for any advice.

To TM, it is a different computer. The logic board includes your Ethernet "Mac Address", which is a unique number that TM uses to be sure it knows which Mac is which.
There is a fairly elaborate way to attempt to persuade TM that the existing backups really are for your "new" Mac: http://www.macosxhints.com/article.php?story=20080128003716101
It is very easy for the inexperienced user of Terminal (and the not-so-inexperienced as well) to make an error with Terminal, get no error message, and have it not work, so try it at your own risk.
But there is an alternative: hold down the Option key while selecting the TM icon in your Menubar. The +Enter Time Machine+ option changes to +Browse Other Time Machine Disks.+ That's a bit misleading, but it will take you into the normal TM interface where you can see and restore from the old set of backups.
Even if you're successful with the Terminal work, your first backup with the new logic board may be a full one -- every file and folder on your system. If TM decides to do that, you cannot prevent it.
So if your TM disk/partition isn't at least 2.5 times the size of the data it's backing-up, your best bet may be to just erase it with Disk Utility and let TM start over.

Time Machine Won't Continue Old Backup

My computer was being repaired at Apple for a few weeks and I just got it back. No hard drive data was modified during the repair; the optical drive needed work. Anyway, I plugged in my external hard drive a few moments ago and it's backing up the whole system and won't let me return to the previous backups that I already have. I'm trying to recall a few files and Time Machine won't let me find them even though they're on the external drive. I did, however, accidentally rename the external hard drive when I was using it without Time Machine a few days ago.
Is there a way for me to continue where I left off with my old Time Machine backups? I'd hate to lose them all and I don't want to re-install the entire system from a previous one from a month or so ago; I just need to look at a few old files. Thanks for any help!
Greg

So, here's what happened.
Time Machine uses the xattr system to assign specific folders hidden attributes. Time Machine sets each folder up in its hierarchy with a xattr tag for the Ethernet MAC address of the machine it is backing up. This is all done invisibly. So, when I got a logic board, and a new MAC address, it wouldn't treat the old archive as concomitant with the new machine. So, here's how you fix this:
- remove the ACLs from the Time Machine DB
- use the xattr command at Terminal to put your new MAC address on the folder.
Full details are available here:
http://www.tombridge.com/rta/2008/01/after-the-apple.html

I recovered my back up via a wired connection. now Time Machine does not recognise older back ups wirelessly and wants to do a first back up

I recovered a back up from my time machine via a wired connection after getting the 'white screen of death'. Now Time Machine does not recognise any back ups on the time machine when connected wirelessly and wants to do a first back up of the whole machine. How do I get my mac to recognise these older back ups? It connects to the wifi network the time machine creates fine, with the same name and password.

I recommend the following.
1. Reset the TC to factory.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
2. Rename the TC to SMB standard.
That means short names.. 2-20 characters but less than 10 is excellent. eg TCGenx (use number for x that is actual generation of the TC)
No spaces.
Pure alphanumeric. No apostrophe.
3. Ensure IPv6 is set to link-local..
Do the same thing for ethernet if that is used.
4. Manually mount the TC disk in Finder.
Use Go in the top menu.. connect to server.
Type in
AFP://TCname.local (where TCname is your new short name for the TC and local is default domain .. it helps using the domain I found).
You will then find the computer either can or cannot find the network resource.. if it fails something else is wrong with the actual network and you will need to fix that.
It will request the password if it is found.. password is public by default unless you changed it.. type in the password and check to keep it in your keychain.
5. Delete current TM setup and redo it with the newly named TC.
See A4 here. http://pondini.org/TM/Troubleshooting.html
If your backups cannot be found, try B6 again, now that you actually know that the disk has been properly discovered.

My Time machine won't back up. Recently updated to OS x 10.7.5. Error message is as follows: "The backup disk image "/Volumes/Time Machine Backup/Scott's MacBook Pro.sparsebundle" is already in use." What is wrong and how do I fix it? Thanks.

My Time machine won't back up. Recently updated to OS x 10.7.5. Error message is as follows: "The backup disk image “/Volumes/Time Machine Backup/Scott’s MacBook Pro.sparsebundle” is already in use." What is wrong and how do I fix it? Thanks.

Have you tried restarting the computer? Also, see Time Machine Error from this pages sidebar under More Like This.

Hi there. just bought a TC, installation was succesfull, but time machine won't work. can't select Backup disk. get transferred to TC install again. Called Apple, 25 min. later no succes, have to call on monday again!!!! Can anyone help me? Thanks a lot.

Hi there. just bought a TC, installation was succesfull, but time machine won't work. can't select Backup disk. get transferred to TC install again. Called Apple, 25 min. later no succes, have to call on monday again!!!! Can anyone help me? Thanks a lot.

See #Q1 in Using Time Machine with a Time Capsule.
If you have a problem, please tell us exactly what, and on which step there.

Time Machine won't start after migration to new MacBook Pro.

I upgraded to a new MacBook Pro. Both machines are running OS X 10 (10.7.5 on old, 10.8.2 on new). I used an ethernet cable for the data migration.
I'm trying to use the Time Capsule we've been using all along for Time Machine, but Time Machine won't start because there's only 5.1GB free on the device and it wants to run a full backup. "The backup is too large for the backup disk. The backup requires 252.33 GB but only 5.07 GB are available."
What are my options? I'd hate to lose prior versions of all the data I've moved to the new machine, but if I have to, then I have to. But then I'm not sure how to access the Time Capsulre base as a non-backup drive and delete what's there.
Thanks for yor help.
Vince

Windows in VM is going to know it's on a different machine, so you'll still have to hop through Microsoft's hoops or you won't get updates.
Just an FYI: when moving a Fusion virtual machine, the first time you run the virtual machine, you are prompted if you "moved it" or "copied it". Selecting "moved it" will retain the UUID and prevent Windows from prompting for reactivation. (However, if it is a copy of the virtual machine and you wanted to run both copies simultaneously on the same network, you must select "copied it" otherwise the copies can't run at the same time.)
If one did select "copied it" accidentally, then just follow the reactivation prompts. As long as you're not reactivating a lot then it usually will work the normal way over the internet. Even if you're forced to call, just tell the support rep that you're reinstalling Windows and type in the really long code that they say. The few times I've had to call, it was less than 15 minutes. Again, as long as you're not reactivating a lot (so looking suspiciously like a pirate,) reactivation is a pain, but relatively quick.

Time Machine won't recognise my Dlink DNS323 RAID device for storage

Similar Messages

Maybe you are looking for