Time on Phones are Different Then System Time

The time on the phones are different then the time on the system. How do we force a sync?
Here is the time on the phone
Screenshot below of system time
The system has been rebooted twice and still no resolution.

Five reboots later the time is sync'd
Sent from Cisco Technical Support iPhone App

Similar Messages

Display of Custom Item in Emulator and Nokia Phone are different

I'm creating a Custom Item which will either display text or image depending on the parameter. I tried with both displaying of text and image on the emulator and it looks reasonably well. However, when i install in my Nokia 6210, the display is not the same. The longer text (more than 30 characters including space) appears to be truncated as the Nokia 6210's screen width seems to be smaller. Then, i increased the minimum height in my code and break the texts to 2 lines to be displayed. Again, it's displayed well in the emulator but on the phone, the 2 lines of texts are overlapping.
For image, i can position the image by changing the anchor of the image and x & y in g.drawImage. Again, it's displayed correctly on the emulator but it's not well aligned on the phone and the image looks to be smaller with the background rectangle of the Custom Item.
What i want to achieve is to display the texts or image well aligned horizontally and vertically in various J2ME devices. Can anyone give me some clues like what parameters to change or to take note?
Below are my code:
import javax.microedition.io.*;
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import java.io.*;
import java.lang.*;
import java.util.*;
public class BCItem extends CustomItem implements ItemCommandListener {
    private MyMidlet midlet;
    private String linkURL;
    private boolean isText;
    private String bannerText;
    private Image image;
    private final static Command CMD_OK = new Command("Visit Ads", Command.ITEM, 1);
    private String [] displayText;
    private String displayTextPart;
    private int displayableWidth;
    public BCItem (String title, MyMidlet midlet, String linkURL, boolean isText, String bannerText, Image image) {
        super(title);
        this.midlet = midlet;
        this.linkURL = linkURL;
        this.isText = isText;
        this.bannerText = bannerText;
        this.image = image;
        displayableWidth = midlet.getWidth();
        setDefaultCommand(CMD_OK);
        setItemCommandListener(this);
     public int getMinContentWidth(){
    return 240;
public int getMinContentHeight(){
    return 20;
public int getPrefContentWidth(int width){
    return displayableWidth;
public int getPrefContentHeight(int height){
    return getMinContentHeight();
public void paint(Graphics g, int w, int h){
      if (isText) {
          g.setColor(0x000000);
          g.setFont(Font.getFont(Font.FACE_MONOSPACE, Font.STYLE_UNDERLINED, Font.SIZE_SMALL));
            g.drawString(bannerText,1, 1,
                   Graphics.LEFT| Graphics.TOP);
      else {
           try {
            g.drawImage(image, getMinContentWidth()/2 + 20, 1, Graphics.RIGHT| Graphics.TOP );
        catch (Exception e) {
            e.printStackTrace();
public void commandAction(Command c, Item i) {
      if (c == CMD_OK) {
          try {
              System.out.println(linkURL + " visited");
              if (midlet.platformRequest(linkURL)) {
                  System.out.println(linkURL + " visited");
          catch (Exception e) {
              e.printStackTrace();
}

This forum isn't the complaints department, it's a place where users help each other. Obviously a fellow user cannot help you to resolve this.
What you need to do is call nokia care in India and ask for the official complaints address. You will then need to write a polite letter (not an email) detailing your issues. They will respond to you and try to resolve the situation.

Photos in develop module are different then when in the library.

When i'm editing photos in the develop module they look really clear and good. When i switch to the library, they have a lot of noise and look nothing like how I edited them. I am using lightroom 4 for my mac. It's annoying to have to switch between the develop module and library to see what they are going to look like.

The differences in most cases are unoticeable however I am getting this banding effect on a BW image I am editing and it is very difficult to tell if it is there or not in the the real image. In Library it shows up as this magenta band in tonal differences and in develop it isnt there. I looked at the image on my laptop and it doesnt show up there in Bridge but it does show up on Lightroom in the Library module.
This is pretty lame considering I would be sending this file out to get printed and hoping no banding shows up. I don't like guessing, that is why my monitor is calibrated etc.
If anyone has a similar issue or fix let me know.
Ethan

Lightroom has crashed with error message 'error reading from its preview cache' - this happens every time i try a launch it. I have looked a forum to repair the fault. there are different recommedations.can you tell me step by step how to recify this pro

lightroom has crashed with error message 'error reading from its preview cache' - this happens every time i try a launch it. I have looked a forum to repair the fault. there are different recommedations.can you tell me step by step how to recify this problem. i can not find ircat ir data etc in the programme files. Thanks

robmac76 wrote:
can you tell me step by step how to recify this problem.
Yes:
Step 1: Delete the preview cache.
That's it!
So, the trick is to find the preview cache.
This document gives location:
http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-41.html
To be clear: it's a folder in with your catalog and you want to delete the whole folder but nothing else.
If your catalog file path is "X:\My Catalogs\My Catalog.lrcat", then the preview cache "folder" will be:
X:\My Catalogs\My Catalog Previews.lrdata
So the trick is to find your catalog file, and since Lr won't open your catalog and run, you can't use it to find out.
But you should be able to find it by searching your disks for *.lrcat files - do you know how to do that?
Which OS?
If you know the name of the catalog it will help, but also: it's probably NOT in with your program files.
UPDATE: The above-mentioned document gives default name and location for preview cache, so if you haven't overridden the default, it should be right where that document said it would be - is it? (of course you need to know your user name too, but presumably you do, no?).
R

Shopping cart Creation Time is different from system time

Hi ,
Shopping Cart Creation Time is Different from System time.
Could you tell me,        to which time it is refering to.
How to change it.
Create By is      webseruser
Where can I find the required settings for the same
Thanks In advance

Hello,
Are you checking this in BBP_PD?
If you go to SU01 and check parameter "Personal Time Zone" -> "of the user", this time will appear to end user when creating document (document header in web).
                                                                                If you do not have informed any value, it will be populated the pattern system timezone, defined in SU01 as well.
                                                                                - I created a RFX in my test system with a user who's timezone (in tx SU01) is set as:
Sys. Time Zone     CET
of the User        INDIA
- CET time was 20:01:55
- GMT time was 18:01:55
- India time was 23:31:55
Looking at this RFX in BBP_PD I see the following:
Same user (India timezone and CET as "Sys. Time Zone"):
Created_At: 20:01:55
Changed_at: 20:01:55
DETAILS (header):
Created at: 18:01:55
Changed at: 18:01:55
RFX header (description): 23:31:55
So, for end users, you should populate field "of the user" in SU01.
In BBP_PD header details, you will have the GMT time (which is stored in internal tables).
In BBP_PD created_at and changed_at you will have the system time zone, as defined in SU01.
Regards,
Ricardo

When putting an event on my iPhone calendar and the time, when it goes to iCloud to my laptop or iPad calendar the times are different. How can I make the time the same?

When putting an event and the time on my iPhone calendar, when it goes to iCloud to my laptop or iPad calendar the times are different. How can I make the time the same?

Welcome to the Apple Community.
Is the calendar you are adding events to on the phone an iCloud calendar.

TS1741 Streaming from my iPad to my tv is not working, it keeps saying the iTunes accounts are different but I've checked it a ton of times and its the same, anyone had the same problem?

Streaming from my iPad to my tv is not working, it keeps saying the iTunes accounts are different but I've checked it a ton of times and its the same, anyone had the same problem?

Hi JenJen73,
If you are having issues with AirPlay streaming from your iPad to your Apple TV, you may want to take a look at the troubleshooting steps in the following article:
Apple Support: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts4215
Cheers,
- Brenden

ICal on iPad times are different?

When I try to import my schedule from my MBP to iCal on my iPad I get an error. I think the error is because the iPad time and the time on iCal are different, on the iPad. I am not able to figure out how to reset the iCal time on my iPad to correspond with the time in iCal.
Any suggettions would be appreciated.

I just checked my iPad again and it looks like the time zone is Korea on iCal and local TX time as far as the iPad itself is concerned. The red time line on iCal is what is not right and I can't figure out how to change it.

Installed Lion, change wallpaper, "desktop & screensaver" freeze, force quit, then "system preferences" freeze and need force quit every time

After Lion install, tried to change wallpaper in "system preferences"->"desktop & screensaver" appeared but immediatly freeze, so force quit.
Then System preference pane as it immediatly freezes if I try to open it. Have to "force quit" each time.
Found many people have the exact issue and highly likely it's the bug of lion.
Anybody found a solution? Thx.

It has to do with a problem accessing the images on the home>images folder. To solve it, just move its content (iphoto library included) to another place. Then, restart System Preferences. Moving your iPhoto library to another location seems to fix the problem. I am sure Apple will issue an update to correct this problem. But, for now this seems to work for me.

I am trying to download a movie in iTunes and I was asked two security questions. They are different form the questions I chose and whenever I exit and try again, I see that the questions change every time. How can I reset the questions?

I am trying to download a movie in iTunes and I was asked two security questions. They are different form the questions I chose and whenever I exit and try again, I see that the questions change every time. How can I reset the questions?

From a Kappy post
The Best Alternatives for Security Questions and Rescue Mail
1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
An alternative to using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

Device time and Network time are different - why?

My Device Time and network time are different by a couple of minutes. My friends BB is different by about 1 hour.
- Why is that?
- How do we fix it?
Solved!
Go to Solution.

The device does not automatically update its time.
What are you time settings? Network or BlackBerry?
While in the Date/Time settings > Menu > Update time and it will update the time according to the network.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

When i sync my ipad and imac on ical the times are different yet the time zones are the same, any ideas why?

when i sync my ipad and imac on ical the times are different yet the time zones are the same, any ideas why?

Under the summary tab in iTunes make sure you have Automatically Back Up This computer. If you have iCloud selected it won't back up when syncing.

I pull fiftyfour bytes of data from MicroProcessor's EEPROM using serial port. It works fine. I then send a request for 512 bytes and my "read" goes into loop condition, no bytes are delivered and system is lost

I pull fiftyfour bytes of data from MicroProcessor's EEPROM using serial port. It works fine. I then send a request for 512 bytes and my "read" goes into loop condition, no bytes are delivered and system is lost

Hello,
You mention that you send a string to the microprocessor that tells it how many bytes to send. Instead of requesting 512 bytes, try reading 10 times and only requesting about 50 bytes at a time.
If that doesn�t help, try directly communicating with your microprocessor through HyperTerminal. If you are not on a Windows system, please let me know. Also, if you are using an NI serial board instead of your computer�s serial port, let me know.
In Windows XP, go to Start, Programs, Accessories, Communications, and select HyperTerminal.
Enter a name for the connection and click OK.
In the next pop-up dialog, choose the COM port you are using to communicate with your device and click OK.
In the final pop
-up dialog, set the communication settings for communicating with your device.
Type the same commands you sent through LabVIEW and observe if you can receive the first 54 bytes you mention. Also observe if data is returned from your 512 byte request or if HyperTerminal just waits.
If you do not receive the 512 byte request through HyperTerminal, your microprocessor is unable to communicate with your computer at a low level. LabVIEW uses the same Windows DLLs as HyperTerminal for serial communication. Double check the instrument user manual for any additional information that may be necessary to communicate.
Please let me know the results from the above test in HyperTerminal. We can then proceed from there.
Grant M.
National Instruments

HT204053 My apple ID on my phone and Imac are different and neither will let me change them to match. What do I do next?

I am trying to set up my icloud on the \Imac and Iphone 4S and the icloud ID's are different. I want to chnage the phones icloud user ID but can't seem to make it happen. Not sure what to do next

Welcome to the Apple Community..
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

What different IDES systems are available?

Hello.
I know that there is a ECC IDES System available. Is there also a Netweaver Portal Ides Version available? Or an ides system with Netweaver portal, ecc, bi and BW with some prepopulated data and some basic webdynpro within the portal to show ecc, bi and bw content? Is something like that available?
Thanks
Danny

Hi
Following are the different IDES systems available to-date...
For more details logon to <b>https://websmp205.sap-ag.de/ides</b> - customers & partners (OSS ID required).
New Releases available
IDES SAP ERP 2005 (SAP ECC 6.0) UNICODE
IDES SAP CRM 2005 UNICODE
IDES SAP SRM 5.0 UNICODE
IDES SAP SCM 5.0 UNICODE
IDES SAP ERP 2005 (BW 7.0/SEM 6.0) UNICODE
IDES SAP ERP 2005 (SAP ECC 6.0) for IS Retail UNICODE
IDES SAP ERP 2005 (SAP ECC 6.0) for IS Healthcare NON UNICODE
IDES SAP ERP 2005 (SAP ECC 6.0) for Campus Management
Coming Soon:
IDES SAP ERP 2005 (SAP ECC 6.0) for IS Oil UNICODE
Rgds
Reddy

Time on Phones are Different Then System Time

Similar Messages

Maybe you are looking for