Time overlapping of data record
Hi All,
I am facing the problem Time overlapping of data record while loading Infopackage.
Error: Record 46 :YGTMARKET : Time overlapping of data record 46 with 47 : '['99991231'/'19000101'] '[to/fr
whats the remedy?
Thanks
sonal
Hi,
Please look at /BIC/TYGTMARKET table in SE16.
Find the record with a key = 47 and notice what values have Date_from and Date_to fields. The interval they determine, overlap with 01.01.1900 - 31.12.9999.
You need to supply correct date_to & date_from values.
Assign points if helpful
Similar Messages
-
Time overlapping of data record 3 with 4
Hi all
While Running the DTP for loading master data from PSA to INFO OBJECT i am getting this error "Time overlapping of data record 3 with 4 ".
can anyone help me for resolving this
thanks
Preethi.....The datefrom/validfrom and dateto/validto of those two records have some overlapping period. Browse the PSA table to see the date from and dateto values.
Analyze why the extractor is bringing records with overlapping periods. If its a custom datasource make sure the view/functionmodule is generating proper non-overlapping records using RSA3 -
Error:Time overlapping of data records.
when I was filling COSTCENTER Info object with master data from the SAP R/3 source system , and I have given certain time interval in update tab , I got an error in PSA stating that ' Time overlapping of datarecord 'x' with 'y'.
can you any one help me .Hi Sandya,
In the error message it would be showing the table name, the records which failed with error and values in error.
So, please look at table in SE16. Find the record with a key as same as the value which you got in error and notice what values have Date_from and Date_to fields. The interval they determine, overlap with the values in error.
If you would have given the error string I wud have been in a better situation to take it as reference and expalin it to you...
Refer:
Master data load failure
Time overlapping of data record
hope it helps...
Cheers,
Habeeb -
Time overlapping of data record..very urgent
Hi All,
while loading time dependent data(texts..0HRPOSITION), i am geeting the following error....
Processing (data packet): Errors occurred
Data Package 1 ( 7418 Records ) : Errors occurred
Update ( 0 new / 0 changed ) : Errors occurred
Data records for package 1 selected in PSA - 2 error(s)
Record 7415 :0HRPOSITION : Time overlapping of data record 7415 with 7416 : '['20100924'/'20070618'] " .
Record 7416 :0HRPOSITION : Time overlapping of data record 7415 with 7416 : '['20100924'/'20070618'] ....
Could anyone let me know how to rectify this error and reload the IP..I am workning on production system.....its very urgent
Thanks in advance.
ManjulaHi Manjula
!)0HRposition infobject and check what is the time previously for that record..
2)Edit the PSA for the 7415 or 7416 and change the vlaue to the previous record time which u found in the infoobject
3) i think ur doing a full load. so better edit the PSA and repload the data from PSA
Regards
AK -
Error 4 in the update: Time Overlapping of data records
Hi Experts,
I am loading 0EQUIPMENT master data load, after scheduling i'm getting Time overlapping of the data records. can anybody give the inputs for this...
Regards
SKHi,
Take a look at: Master data load failure
Also maybe OSS note 314964 will help.
Hope it helps,
Gili -
DTP got failes due to overlapping time intervals of data records
Hi,
Can any one suggest me how to solve this issue....
the problem is when iam loding Master Data DTP, the DTP is showing error message that Overlapping time intervals of data records.I mean the start data and end data for these error records are same.
Eg: For some employees the start date and end data are same.
Please advice , what can be done...
Immediate reply is realy appreciated.Hi Shaik,
By checking this check box ...
You won't get any duplicate records, before loading the data DTP removes the duplicate records and loads into Master data.
So, you can avoid the duplicate records by checking this.
Regards,
Ravi Kanth -
Overlapping time intervals of data record 33 with 34 ,46 with 47 etc..
Hi Freinds,
when i was trying to load master data getting the below error message in DTP/Info package.
The time interval ['20070920 '/' 20070702] & (from/to) for the data records 33 and 34 & overlaps in charecterstics 0HRPOSITION &.
Can you please explain me how to correct this error.
Your input 'll be much appreciated and points 'll be assgin.
Regards,
SyamHi Gurus,
Please see the below error message which i got when i was trying to load master data attributes to HR infoobject.
Diagnosis:
The time interval ['20070920'/'20070702'] & (from/to) for the data
records 33 & and 34 & overlaps in characteristic 0HRPOSITION &.
System Response
Procedure
If this message appears during a data load, maintain the attribute in
the PSA maintenance screens. If this message appears in the master data
maintenance screens, leave the transaction and call it again. This
allows you to maintain your master data.
Procedure for System Administration
Out 1000 records getting error for 12 records.
I could n't find in infopackage that Ingnore Duplicate Records and that info object is time dependent.
Please put some inputs to solve this issue.
Points 'll awarded for helpul answers.
Thnaks,
Syam -
Overlapping Time intervals of data record 33 with 44,46 with 47 so on...
Hi Friends,
when i was trying to load the master data attributes to info object getting the bellow error message:
Diagnosis
The time interval ['20070920'/'20070702'] & (from/to) for the data
records 33 & and 34 & overlaps in characteristic 0HRPOSITION &.
System Response
Procedure
If this message appears during a data load, maintain the attribute in
the PSA maintenance screens. If this message appears in the master data
maintenance screens, leave the transaction and call it again. This
allows you to maintain your master data.
Procedure for System Administration
Geeting error for 12 records out of 1200.
Already my info object is time dependent master data.
to ignore the dulpicate records i couldn't find any option in that info package..
please let me know the error ...
points 'll be assigned for helpul answers..
Regards,
SyamHi ,
You can go for PSA maintainance or
If u r using DTP then in DTP Ececution screen under Update tab there is a check box
Handel the duplicate records
click it and activate the DTP and Execute.
Thanks
RK -
Changing time dependent master data records
Hello All,
I have a time dependent master data infoobject that has 39 million entries.
Now we decided that we no longer need it time dependent.
Hence we want to maintain constant value ( 01.01.1000 to 31.12.9999) going forward.(as changing the object's time dependency will have huge impact)
But for the historical data, we want to fix this and maintain only one record per value which will be the last record.
Can you please provide inputs on how this can be achieved as i tried various combinations of load( load to a copy object taking only last record, changing its valid to to 01.01.1000 and loading back) and its not working.
e.g the value XXX has following entries currently:
Object
Valid To
Valid From
XXX
15.06.2007
01.01.1000
XXX
19.09.2007
16.06.2007
XXX
28.01.2008
20.09.2007
XXX
30.03.2009
29.01.2008
XXX
31.03.2009
31.03.2009
XXX
15.04.2009
01.04.2009
XXX
31.12.9999
16.04.2009
we need to get to the below format:
Object
Valid To
Valid From
XXX
31.12.9999
01.01.1000Hi Dhanya,
The approach u did (load to a copy object taking only last record, changing its valid to to 01.01.1000 and loading back) will not work on Master data because it is not a DSO, with the Proper keys in place, to overwrite all the previously existing data records. This approach will only work if the infoobject is not time dependent and in that case the question u posed will not arise at all .
SOLUTION:
One thing is Inevitable as Prashanth has prescribed, u have to delete the transaction data first at all the places, where and all it was used.
Then just delete the entire master data from the info object and just do a FULL DTP load from the underlying datasource putting a FILTER like "VALID_TO = 31.12.9999" so that only the last record of a particular Value will be loaded. (No need to do a full load from the source because even in the source it might had been the same old Values and might not have been revamped.)
Even for further delta's, it will be safer to maintain this filter at the DTP level if u r not sure of the constant value maintenance at the source.
Thanks & Regards
Sasidhar -
Time overlaping between the two records
Hi experts,
I'm xtracting data from R/3 to BW. when the load was triggered i'm getting a error message that time overlaping between the records.
Can any one tell , what action should be taken to solve this issue. Is there any setting in BW side to handle time overlaping error.
Regards
KumarHi Kumar,
Try replicating the datasources in BW.
Regards,
R.Ravi -
Discrete time range over date range (using CR X1)
Post Author: sjr
CA Forum: Formula
Can anyone show me how to select data over a discrete time range i.e. 6 p.m. till 11 p.m. per day, over a period of a month ?
Using the data time parameter gives me data from 6p.m. on startdate right through till 11p.m. on endate.Here's a more detailed description...
Create two formula fields to split the date and time from the data records (ds prefixed):
dsDate
dsTime
Create two formula fields to split the date and time from the parameter fields (pm prefixed):
pmStartDate
pmStartTime
pmStartDate
pmStartTime
Use your new formula fields in the record selector. Get to this off the Report menu button (in CR 2008):
Report | Select Expert... | Record.
You can pick the formula fields in the Forumula Editor to create something like:
({@dsDate} > {@pmStartDate} and
{@dsDate} < {@pmEndDate}) and
({@dsTime} > {@pmStartTime} and
{@dsTime} < {@pmEndTime)
Tim -
Revaluate data record at the time of loading from flat file or BI Cube
Hello Friends,
I want to revaluate a data record at time of loading using Transformation or Conversion File, based on some condition.
Like, I have a rule to identify that a record is supposed to be multiplied by -1 or not.
For example,
*if (ID(1:5) = str(00070) then(Record-1)
ID(1:5) = str(00071) then (Record-2)
Can you please guide me how can I achieve this by using Transformation file or Conversion file?
Regards,
Vishal.Hi Nilanjan,
Thanks for reply.
I tried the script you suggested in conversion file for Account.
But It is not working for me.
Even I tried simple multiplication and also addition in Formula column it is not working.
External --> *
Internal --> *
Formula ---> Value * -1
Above conversion file for Account was not working for me.
then I tried
Formula --> Value + 100
It also did not work for me.
Kindly suggest if I am doing anything wrong in above file.
Thanks,
Nilanjan. -
Data record with time interval error
Hi,
I have come across the following error.
Data record with Time interval error and data is getting loaded into data target and no PSA in between.
thanks
krisHi Kris,
Could you please explain your problem little bit more. I mean what is source and target, or you using IP or DTP.
goto the details in monitor tab, you will come to know to which record yo uhave error.
If you are running IP, it is recommended to keep PSA.
Regards,
Venkatesh -
Need to display/update last date/time of an accessed record
Hi All,
I'm using ADF BC and I have a use case where I need to display the last date/time when a user access a record in a view. I have a user table that I access thru a view object where I can store the date/time of the fetched record. A viewLink from that view object gives me the detail information in that record.
I generated a ViewRowImpl class and added this to the method that get the time and date (DtHeureDernAcces is a private variable in defined in the class):
/**Gets the attribute value for the calculated attribute DtHreDernAcces
public Date getDtHreDernAcces()
if (DtHeureDernAcc==null)
DtHeureDernAcc=(Date) getAttributeInternal(DTHREDERNACCES);
setDtHreDernAcces(new Date(new java.sql.Timestamp(System.currentTimeMillis())));
getApplicationModule().getTransaction().commit();
return DtHeureDernAcc;
This works fine until the user refresh the page, in this case the ViewObjImpl is recreated and DtHeureDernAcc is then null. So the date/time is updated after each refresh.
How can I get around this problem ?The complication here is that &P7_DATE_SHIPPED. and &P7_DATE_ORDERED. are session-state variables - they don't actually get updated until the page submit completes, which is happening AFTER the dynamic action.
JavaScript might provide an alternative method that will pick up the current values of those fields. You might try something like:
HTML Header
<script language="JavaScript" type="text/javascript">
function check_hours(pThis){
var v_shipdt = $v("P7_DATE_SHIPPED");
var v_ordrdt = $v("P7_DATE_ORDERED");
if(v_shipdt > v_ordrdt){
alert("Shipping Date is before Order Date!");
return true;
</script>Put this in the HTML Form Elements Attributes of your page item:
onchange="check_hours(this)"This is just pseudocode, but it may help get you started. Dates in JavaScript are a little tricky to deal with. -
Select Records between Begin Date/Time and End Date/Time
Hi, I need to select records from table GLPCA where the CPUDT and CPUTM are between a START DATE/TIME and END DATE/TIME.
I have the below logic from an SAP Solution, but it doesn't seem to be working right in my opinion. It is picking up records earlier than the date ranges. Can anyone tell me how I might be able to accomplish this? I'm hoping this is an easy one for the ABAPPERs...
Thanks,
START DATE 20091022
START TIME 125736
END DATE 20091022
END TIME 135044
CPUDT 20091022
CPUTM 100257
SELECT * FROM GLPCA
WHERE ( CPUDT >= STARTDATE AND ( CPUTM >= STARTTIME OR ( CPUDT <= ENDDATE AND CPUTM <= ENDTIME ) ) ).Thank you all! I ended up using the following:
SELECT * FROM GLPCA
WHERE RYEAR IN L_R_RYEAR
AND ( ( CPUDT = STARTDATE AND CPUTM >= STARTTIME ) OR CPUDT > STARTDATE )
AND ( ( CPUDT = ENDDATE AND CPUTM <= ENDTIME ) OR CPUDT < ENDDATE ).
This child was born from the following thread that was found:
update date and time of client record
Maybe you are looking for
-
ITunes doesn't connect to remote speakers on my Airport Express?!?
Can you help me solve this technical issue? I have a Linksys wireless router with another device as a wireless repeater (to extend my wireless network). On the other end of this wireless network is my AirPort Express with the AirTunes enabled. I can
-
How can I recover or restore mac os x
how can I recover or restore mac os x
-
Runtime exception while I connect to SAP using JCO
I am getting this error when I am trying to write a Java DC Project using NWDS. I have added all the JCO API DC to my project and all the classes are available in that. I am getting runtime exception class not found - com.sap.mw.jco.JCO$Repository I
-
FCP Says 'Writing Video' What's it doing?
Seems harmless, I think, but when I leave FCP open and say go off to have lunch or some such thing, a few times when I've returned I find it clicking away and 'writing video'. Some kind of save or what. The first time I waited for it to finish 'writi
-
Contact sheets -- can you include metadata?
We need produce a contact sheet that includes a small amount of metadata, specifically image dimensions and dpi. Obviously I don't want to type all of this in. Any ideas about how to do this? Thanks!