Time slip with HR-Forms for e.g. Time Management Pool (PT40)

Hey all,
we are thinking about changing our time slip form from PE51 to HR-Forms.
But we can't find a solution to switch (e.g.) the following transactions to use/display the HR-Forms form instead of the (old) PE51 one:
PT60 Time Evaluation
PT40 Time Management Pool
For us it looks like that we have to maintain both forms (one for ESS and the other one for Administration), but we want to use the HR-Forms for all functions.
Best Regards
Jürgen Orf

Hi Carlos,
unfortunately not. Do you have any idea?
Best Regards
Juergen

Similar Messages

PCR with Adobe forms for MySAP ERP2004 / NW04 SP9

Hi all,
We would like to use the MSS PCR functionality with Adobe forms. Since we are using NW04 SP9 and MySAP ERP2004 (ECC5.0), we cannot use the Adobe forms yet.
SAP said this functionality will be released today (15/11).
I am wondering what we need to upgrade to get this working. Is this a bug in ECC, in Adobe Forms, WebDynpro (BP for MSS) or a PCUI_GP bug?
regards,
Noel

Hi Heike,
Good to know these forms are only available in German and English. I assume we can translate them ourselves and use them.
We tried to get the 2 scenarios working, but every time we run into a problem: "Template could not be read from the backend". For this we already created a customer message, but it takes quite a while for an answer. Not strange, since it is new and hot technology
We have 2 servers now: One is the application server (with WebDynpro, R/3 backend, ECC50) - Java and ABAP stack installed (AIX).
On the other server we have running the portal and Adobe Document Server. This runs only on a Java stack (NT).
In the Adobe Configuration Guide we ran against a problem configuring the DestinationService (Basic authentication on the ABAP side). On the Java/ABAP server (server 1) we need to configure the com.adobe/AdobeDocumentService classes (security). Since Adobe is installed on server 2 (without the ABAP stack), we cannot configure the basic authentication properly (if we follow the guideliness).
Regards,
Noel

Replacing Adobe forms with Smart Forms for printing FPM based forms

Hello All,
This pertains to HCM Process and Forms with Floor Plan Manager (FPM) based forms.
SAP has provided Adobe Forms as the standard print option for FPM based forms, as can be seen in the attached screenshot.
We want to use the FPM based forms without using Adobe Document Services (ADS). I am checking the feasibility of replacing the PDF forms with Smart Forms, either through configuration or customization.
System Landscape: ECC 6.0 EhP6
Any inputs or suggestions would be greatly appreciated.
Regards,
Arun.

Hi Ketul,
Irrespective of the process or scenario, we would like to use Smart Forms instead of Adobe Forms. As seen in the screenshot, SAP has provided the default option of generating a PDF form. This requires installing and using Adobe Document Services. We would like to remove this dependency on Adobe Document Services.
Instead, we would like to use Smart Forms for printing purposes.
This requirement is not tied to any specific process or scenario, but to any business process implemented using HCM Process and Forms framework.
Let me know if you need any further clarifications.
Regards,
Arun.

Need help with designing form for exports

Hi
I am pretty new to designing form in adobe acrobat.
I have adobe acrobat 9 standard with Adobe liveCycle Designer installed.
There are couple of things I want to do.
1.
I would like to add a box where I can change the number (default is 1), and when I increase it, (for instance to two)
then
it will postulate the particular sections twice.
For instance, I am taking two drugs right now, then I would like to increase the number of drugs to 2, so then for each drug
I would enter appropriate information such as drug name, drug form, route of drug administration etcs
I hope this is clear
2.
I am trying to export this in xml format so that only the ones where the user fills in in pdf form gets exported to xml format.
I would like the boxes to have its own tag, for instance the drug name mentioned above can have a tag of <drugname></drugname>
I know this is possible through changing the box's name in binding tab.
What I am interested in is to add a tag for the section, like a header.
For example, if I were to enter two drug information I want the first drug information to be exported to be
<drug>
<drugname>blah</drugname><drugform>1</drugform><drugroute>oral</drugroute>
</drug>
<drug>
<drugname>drug2</drugname><drugform>1</drugform>
<drugroute>ophthalmic</drugroute>
</drug>
how would I add <drug> </drug> for each drug?
also, can I change the order of the tags??
in the pdf form, if the drugname box is displayed later than drugroute box, then when I export it, it will display as
<drugroute>oral</drugroute><drugname>blah</drugname>
but I want to manually set the order of tags when exported.
Sorry I asked so many questions
I hope it is clear enough for you to visualize what I am trying to do
Thank you so much

1. You can certainly add sections for the number of drugs that the user specifies pr
ovided that the form is set up the correct way to begin with. The drug information section must be wrapped in a subform (usually Poistioned) and that in turn must be wrapped in a flowed subform. Then the form must be saved as dynamic. If this information is all that is on the form then that shoudl be all you need to do. If th edrug section is in the middle of the form then you need to wrap the other parts of the form in a subform so they can be pushed down when we add the drug subforms. It can get confusing ...seeing the form amnd its structure would help to clarify.
2. You canbnot change the names of tags on the fly but you can change their values. AS mentioned above, when you wrap the Drug information in a subform that subform name can be used as a tag in the XML. Then you could have a node with the tag (or an attribute) that names the drug in question. Something like this:
<Drug Section>
     <Drug>
          <DrugName></DrugName>
          <Dossage></Dossage>
          <Supplier></Supplier>
     </Drug Subform>
     <Drug>
          <DrugName></DrugName>
          <Dossage></Dossage>
          <Supplier></Supplier>
     </Drug>
</Drug Section>
As mentioned earlier this is always easier to explain when you see it in context of your form.....if you want to send it to me at [email protected] I can get you started at least. Please include a description of your issue in the email
Paul

Problems with registration form for Make It Video webinars

I want to register for your Make It Video webinars. But I can't, since 'State/Province' is a required field in the registration form - but there are no Danish options available.

You may refer to this:
Welcome to Adobe Forum,
Creative cloud do not need a serial number. it will be using your Adobe ID on which you have purchased the creative cloud membership.
So you need to login with your Adobe ID and password to activate the cloud membership.
Log out & log back in of the CC Desktop App.
In case it is not signing in successfully please try the following:
I don't know which operating system you are working on so i am giving you some steps windows and MAC OS:
   Windows:
   In windows 7 navigate to following location:
     /windows/system32/drivers/etc
   1. look out for "Hosts" file
   2. Open it with notepad
   3. Check if you have any entry for Adobe
   4. Remove the entries and try again launching any product from CC
   On Windows XP navigate to following location:
   \windows\system32\drivers\etc
   1. look out for "Hosts" file
   2. Open it with notepad
   3. Check if you have any entry for Adobe
   4. Remove the entries and try again launching any product from CC
   Mac:
   1. Please click on "Go" and navigate to /private/etc
   2. Open "hosts" file and check out for any entries for Adobe.com
   3. Remove the entries and save the file
   4. try again launching any product from CC
You can refer :
http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html
http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-i ssues.html.
Please let us know if it worked.
Regards,
Rajshree

Using DDE with Oracle Forms for uploading Excel data

Hi There,
I have used DDE in Forms to upload data from Excel.
The code which I have implemented is as follows:
DECLARE
iApplication pls_integer;
iConv pls_integer;
v2Buffer varchar2(100);
v2text varchar2(100);
nLength number;
nTransactionId number;
/* these varrays are defined in a package specification*/
vExcelProduct p_upload_functions.prd_no:=p_upload_functions.prd_no('1');
vExcelVpc p_upload_functions.vpc:=p_upload_functions.vpc('1');
BEGIN
/*Open an DDE Server application*/
iApplication:= DDE.App_Begin('C:/excel.exe ||v2fileName,DDE.App_Mode_Minimized);
iConv:=DDE.Initiate('EXCEL',v2filename);
BEGIN
/* first row of the sheet used for title . So loop is started from 2*/
/* Reading a row*/
FOR I IN 2..10000
LOOP
/* Reading columns of a particular row*/
     FOR J IN 1..n / * n be the number of columns in excel sheet */
     LOOP
/* generate the cell no of excel sheet from where data will
be fetched- R is used for row no and C is foe column no*/
     v2text:='R'||I||'C'||J||':'||'R'||I||'C'||J;
/* Store the value in variable */
dde.request(iConv,v2text,v2Buffer,dde.cf_text,1000);
/*Stores values in the varrays for a row*/
IF j=1 THEN
/* for first column*/
nLength:=length(v2Buffer);
vExcelOrg(I-1):=To_Number(substr(v2Buffer,1,nLength-2));
     /* for second column */
ELSIF j=2 THEN
nLength:=length(v2Buffer);
vExcelProduct(I-1):=substr(v2Buffer,1,nLength-2);
END IF;
END LOOP;
/*Exit the loop when it encounters an empty row*/
IF vExcelProduct(I-1) IS NULL AND vExcelOrg(I-1) IS NULL THEN
EXIT;
END IF;
/* Otherwise extending the varray*/
vExcelProduct.extend;
vExcelOrg.extend;
/* Reading the next row*/
END LOOP;
/* Now close the DDE application */
DDE.app_end(iApplication);
DDE.terminate(iConv);
EXCEPTION
     WHEN Others THEN
     DDE.app_end(iApplication);
DDE.terminate(iConv);
RAISE Form_Trigger_Failure;
END;
I am facing a problem, I will appreciate if you can give some insights to help.
We have been having problem logging in to application when there are a number of EXCEL processes running (17-18) on the server. Users that have already logged in have no problem, but new login will get "FRM-92101 There was a failure in the Forms Server during startup". The Forms Server itself is running fine. After we killed a few EXCEL processes, new users will be able to login.
Thanks and regards,
Mandeep

this is a trial method and right now i am trying to read only the first cell of the excel sheet and return that value and show it in the UI when the user presses the button but this code is not returning any value.
METHOD read_excel.
INCLUDE ole2incl.
DATA: filename(128) TYPE c,
            excel TYPE ole2_object,
            cell TYPE ole2_object,
            workbook TYPE ole2_object,
           pfile TYPE localfile VALUE
           'C:\Documents and Settings\I047323\Desktop\new.xls',
            name TYPE string.
CREATE OBJECT excel 'EXCEL.APPLICATION'.
SET PROPERTY OF excel 'VISIBLE' = 0.
CALL METHOD OF excel 'WORKBOOKS' = workbook.
CALL METHOD OF workbook 'OPEN'
    EXPORTING #1       = pfile.
    CALL METHOD OF excel 'CELLS' = cell
      EXPORTING
        #1      = 1
        #2      = 1
    GET PROPERTY OF cell 'VALUE' = value.
CALL METHOD OF workbook 'SAVE'.
CALL METHOD OF workbook 'CLOSE'.
CALL METHOD OF excel 'QUIT'.
FREE OBJECT excel.
ENDMETHOD.
Edited by: neelima v on Jan 14, 2008 4:06 PM

Problem with custom development for documents in Record Management

In Record Management i have setup a record model. It contains Bor objects, documents, cases and so on.
Each kind of record managent object has it own requirements.
For the documents there is a requirement which demands that if the scandate is changed also the date till which the document must be helded in the system must be changed.
This cannot be done automatically via default SAP and i don't want to let the customers do it there selfs, to much risk they make errors, so this must be done via custom development.
The logic searches in a enhanced method for the right attributes from the importing list of available attributes of the particular document.
This is going well in the development system but when i transport it to the test system it fails. I have noticed that the content of a custom developed field ( for example ZSCANDATE) is loaded well but a default field like SRM_DOM_STORAGE_START not. The systems returns an error that the description of the attribute is missing. When i look in the DMWB ( DocuMent WorkBench ) i dont see errors, but afcorse there is one.
What can i have forgotten in my record management installation?
Offcorse the test system is a copy of a working development system, but you have also some things that are system dependent. and i think i have forgotten some of those..
If you have a idea let me know!
kind regards,
Anton Pierhagen.

Hi BalusC,
thanks for the quick answer. I tried it as you said and now I get a validation error in my h:messages tag on my jsf page after submitting the form. There are no errors in my JBoss console, just this one word on my jsf page. Do you have any idea what this could mean?
My two lists look like this:
private ArrayList<GroupBean> selectedItems = new ArrayList<GroupBean>();
private ArrayList<SelectItem> allGroups = new ArrayList<SelectItem>();The allGroups list gets filled like this:
for (GroupBean group: groups){
allGroups.add(new SelectItem(group, group.getName()));
}where groups is a simple collection of GroupBeans which I read from the database. This seems to be correct; at least my list of checkboxes shows the correct group names.
Now here is my selectManyCheckbox:
<t:selectManyCheckbox id="sensor_access" value="#{sensorBacker.selectedItems}" layout="pageDirection" layoutWidth="3">
<f:selectItems value="#{sensorBacker.allGroups}"/>
</t:selectManyCheckbox>Any idea what goes wrong here?
Thanks for your help!
Wiebke

Cross Applicatin Time Sheet (CATS) Vs Time Manager's Workplace

Dear Guru,
I am not an expert in HCM Module.
I would like someone to kindly do me a favour in explaining the diffent between CATS and Time Manager's Workplace.
The main objective is to select the right tool for implementing Time Sheet User Interface for "Incentive Wage/Piece Work Payroll Scheme".
Please kindly give me some light.
Thanks in advance.
Surapong

The Cross-Application Time Sheet (CATS) is a cross-application tool for recording working times and tasks. It enables you to control all business processes concerning your employeesu2019 tasks u2013 from paying the employees, through monitoring the progress of a project, to creating invoices.
Its main strength is that it enables your employees to record their own data.The Time Sheet is a cross-application component in SAP R/3.
The Time Manageru2019s Workplace is a user interface incorporating the tasks involved in administrating employee time and labor and time evaluation messages. It was specifically designed to meet the needs of time administrators in decentralized departments.
The Time Manageru2019s Workplace enables time administrators to do their daily work quickly.
The Time Manageru2019s Workplace replaces the majority of functions of the Maintain Time Data (PA61) Time Management Pool (PT40), and Time Recording for Multiple Persons and Infotypes (RPTTMW00) transactions

ADOBE FORM for SAP - where is the documentation

Hello Everybody,
I started to work with adobe form for two weeks now.
And i am wondering something since two days where is the documentation ?
On adobe forums, we find a quick FAQ.
On SCN there is some documentation.
But where is the official or/and most complete documentation ?
Is the full documentation given when you buy the adobe product or is there a full on line documentation ?
Best Regards
Abdou

Here is documentation for formcalc
http://help.adobe.com/en_US/livecycle/es/FormCalc.pdf
Here is documentation for Scripting (JS)
http://help.adobe.com/en_US/livecycle/es/lcdesigner_scripting_reference.pdf
Here is the documentation on the whole package
http://help.adobe.com/en_US/livecycle/9.0/designerHelp/index.htm?content=000403.html
Here is some additional practice to know how to use LiveCycle
http://www.youtube.com/channel/UC6E8WlISDmgiyyq5ZWk-nVw

HT4009 I'm attempting to down load an app by the name of hudmaniax,upon entering my password for purchase approval I'm prompted to re enter my password a second time followed up with a form to create a security form ...I.e name of first school attended e

I'm attempting to down load an app by the name of hudmaniax,upon entering my password for purchase approval I'm prompted to re enter my password a second time followed up with a form to create a security form ...I.e name of first school attended etc etC.

This is normal behaviour. Apple have recently introduced increased security to protect you from fraudulent transactions. Once you have answered the questions (remember your answers) you will only be asked for them occasionally in future.

Outlook 2013 with Exchange Server - Changed custom form for contacts is not shown

Hello,
Our infrastructure:
Exchange Server 2010
Outlook 2010
Outlook 2013
Windows 7 Pro, Windows 8 Pro and Windows 8.1 Pro
The situation:
We've used an old custom form for contacts, worked perfectly fine
I've updated the form (adding some new custom fields and checkboxes) using Outlook 2013 and publishing the form (with a new name) to the Exchange folder
I've set the form as default form in our contacts folder
I've used this Script to set the new form for the existing contacts and the name of the new form is saved correctly
BUT if I open a contact in our Exchange contacts folder, Outlook 2013 (Outlook 2010) still shows the old form
Steps I've taken so far:
Cleared Outlook forms cache
Repeated the above steps 1-4 in Outlook 2010
Switched Cached Exchange Mode off and back on
Allowed Scripts in Trust Center Settings
Used a new clean Windows installation with a new Outlook 2013 installation
Used different Exchange users on different systems, but some behavior when opening contacts
I'm out of options I can think of, so maybe somebody else has some new view on this problem.
Thank you very much in advance!
Greetings,
Karl

Hi,
Is the Exchange folder in which the custom form is published available to all users?
From the description, the script used to work for the old custom form, correct? Which version of Outlook did you use with the old custom contact form? Outlook 2010/Outlook 2013 or an earlier version? If you used the script with an earlier version of Outlook,
we can't make sure it will still work with Outlook 2010/Outlook 2013.
In addition we may also try creating a new contact form and test the steps to see if it will work.
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Filling of S table fails for fields with free form text or description

Hello Everyone,
We are trying to rollup a new InfoCube into our BWA system and it fails with a short dump CONVT_CODEPAGE with exception being CX_SY_CONVERSION_CODEPAGE when filling up S table for a description field.
The only difference between the new InfoCube we are trying to load and the other existing InfoCubes is that, the new InfoCube we are trying to load has a field/InfoObject which is free form description for a line item field.
Also, when I checked the application log the system gives out the message "A Character Set conversion is not possible".
Did anyone encounter this issue when trying to create BWA indexes for InfoCubes which have text columns in the InfoCube.
We are currently at revision 52.
Thanks in advance.

Hi Dharma,
It's an interesting and new BWA case for me, so sorry no direct answer. I'll try to replicate it in free time I hope you opened a message with SAP Support for this.
From pure BW modeling perspective I normally model this in a way that this "description" Characteristic A is marked as "Attribute-only" and then used as a display attribute of another Characteristic B, e.g. Line Item Number. From BWA perspective it means that A is not indexed into the accelerator and joined only for display during OLAP time.
Regards,
-Vitaliy

I am having trouble with the handle bars for music fade in and fade out. It doesn't work. I also cannot see wave forms for music. Cannot select - it is grey. On a deadline and really having problems.

I am trying to finish a video and I want to fade the music in and out. I have read every tutorial I can get and the help info in iMovie. Nothing helsp. I cannot get it to fade by just sliding the handle bars. Other times, the music mutes completely when I try to add a fade. I try to view wave forms for music and it does not allow me to select . it remains grey. I am getting frustrated. I had no problem with 11 version. I now have 10.0.2 version. Can anyone help? my computer is latest Mac Book Pro 2013

This is described in:
http://help.apple.com/imovie/mac/10.0/#mov3b5ded23e
A tip though - if you have a transition at the start or end of a clip it often obscures the fade handle. Trick is to temporarly move the transition (or delete it), move the fade handle then replace the transition.
Geoff.

HT2589 I am trying to create a new account but every time I put in my billing information and numbers, the same screen pops up with, in red "For assistance contact iTunes Support". I am currently overseas and want my imessage to work correctly

I am trying to create a new account but every time I put in my billing information and numbers, the same screen pops up with, in red "For assistance contact iTunes Support". I am currently overseas and want my imessage to work correctly

to contact iTunes store support, follow these steps:
1. Go to expresslane.apple.com
2. select 'itunes' and then 'itunes store'
3. select a topic and a subject
4. click 'continue' and then 'email'
5. fill out the form and explain your situation
6. they will respond within 24 hours usually
Good luck

Strategies for dealing with large forms

I've created a dynamic form that is about 30 pages long. Although performance in reader is OK, when editing, every change takes about 10 seconds to be digested by Designer. I've tried editing parts and then copying them across, but formatting information seems to be lost when pasting.
What are the practical limits to how long a form can be, and are there any suggestions for how to deal with longer forms?
Many thanks
Alex

Performance may be okay in Reader 8, but a 30-page dynamic form will probably by unusable in Reader 7. I have done work with very large forms before, and I have maintained each page in a separate XDP and then brought them together once all the kinks are worked out. I don't know why you would be losing formatting information.
There is a technique that I have used where you use dynamic subforms to show only one page of the form at a time. That approach allows a very large form to be used in version 7 with acceptable response time. However, it's a very complex approach, and I have come to think that it's too complex for comfort. The more complex your approach is the more likely it is to fail in a future version of Reader.

Time slip with HR-Forms for e.g. Time Management Pool (PT40)

Similar Messages

Maybe you are looking for