Time Spent by the user in the system and No. of transactions executed

Hi,
Can anyone tell, if there exists any tranaction/report to get the details of the Time Spent by the User in the system and No. of transasction run by User in a given period of time?
If I get the names of tables where SAP stores this information in, then that also will be helpful.
Thank you!!!

Hello Pranali,
the time spent by a user (which is the difference between login and logout) is <b>not</b> stored anywhere.
STAD and/or ST03 will not help here as only the time of the login could be determined from the workload statistics. The time of the logout cannot be retrieved from the workload data (as this action doesn't contain any "logout specific" information).
As a workaround you can use the Security Audit Log (sm19) to protocol the logon and logoff of the users. Based on this information you should be able to calculate the time a user was logged on.
About the number of transactions:
the workload analysis only uses dialog steps. As the number how often a transaction was called doesn't contain any useful information this information is <b>not</b> collected.
E.g. you can call su01 to create 100 user accounts or call ten times su01 to create one user. The workload creating 100 users will be higher than the workload of the remaining ten transactions...
So the figures 1 transaction vs. 10 transactions doesn't provide any useful information.
Regards, Michael

Similar Messages

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

How to make a text field required at run time when the user clicks the checkbox ?

I got a form where , there are several checkboxes and text fields associated with that checkboxes.If the use clicks on the check box then the associated
text fields should become required.I have tried the change event and the click event for the checkboxes.It gives error in the onChnage event and I got some weird results in the on click event .Sometimes if the user click the check box , then for the 1st time the field doesnt become required , then the user onclicks the check box and when the user clicks the checkbox for the second time the field becomes required,but if i deselects the highlighted field option and selects it again the field becomes required even if the user onchecks it I am totally confused !!! Adding to it i have also written the wrong code still i achieved the desired result ?? How it can be possible . I am writing the codes below , please help me as i am working under a deadline from the client.
onChange event :
var newVal = this.boundItem(xfa.event.newText);
if(newVal == 0)
    xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.Purchasecost3_1" ).validate.nullTest = "disabled";
else
     xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.Purchasecost3_1" ).validate.nullTest = "error";
For the onClick event :
var a = xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row2.CostItemRecovere d_OnlyEnergyCharges").rawValue;
//app.alert(a);
if(a == 0)
    xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").validate.nullTest = "error";
if(a == 1)
      xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").validate.nullTest = "disabled";
   Please help someone !!!

I used the onchange event and wrote the code for it. I got the result . But there is a problem.All these fields are in a table and it's a dynamic table where you can add rows dynamically at the run time .I have other change event for some fields in this table .All are working fine when i add the row.But for this check box the required fields are not validated as required at the run time . I am here giving the code , Please help me .
form1.Subform0.Subform1.Subform9.Subform10.Table48.Row2.CostItemRecovered_OnlyEnergyCharge s::change - (JavaScript, client)
if(this.rawValue == "1")
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L2_1").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L1_2").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L2_2").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L1_3").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L2_3").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L1_4").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L2_4").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L1_5").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L2_5").mandatory= "error";
else
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").mandator = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L2_1").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L1_2").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L2_2").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L1_3").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L2_3").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L1_4").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L2_4").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L1_5").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L2_5").mandatory = "disabled";

After recording text using the dragon dictation app, it is converted, it can be copied to the iOS system clipboard for use in any app, how does the user access the clipboard to retrive this information if it is no longer on the screen?

after recording text using the Dragon dictation app, it can be copied to the iOS systme clipboard for use in any app, how does the user access the clipboard to retrive this information if it is no longer on the screen?

You need to do a long-press in any data entry field, then select Paste.

How do I compare two csv files and not disable the user if the username is found in the 2nd file using powershell?

Hi Guys
I have two csv files with the following headers and I need to import both files into the script to check whether the StaffCode is present in the Creation/Renewal of Contract csv in a DisableAccount Script so I can stop any action to disable the account as
the staff has renewed the contract with the company so the account should not be disabled.
However my accounts are still being disabled. I am not sure now to construct the query so that it detects that the account is to be left alone if the staffcode is present in both files
I does recognize that the $staffcodeN in the renewal file matches the $staffcode in the termination file
but still proceeds to disable or set an expiry date to the account anyway based on the termination file.
How do I stop it from doing that?
1)In the Creation/Renewal of contract file the following headers are present
- TranCode,StaffCode,LastName,FirstName,SocialSecurityNo,DateJoin,Grade,Dept,LastUpdateDate,EffectiveDate
2)In the Disable of contract file the following headers are present
- TranCode,StaffCode,LastName,FirstName,SocialSecurityno,LastDateWorked,Grade,Dept,LastUpdateDate,
My data is not very clean , I have a-lot of special characters such as = , ' ,/ and \ characters to remove first before i can compare the data
Thanks for the help in advance.
Yours Sincrely
Vicki
The following is a short snippet of the code
$opencsv = import-csv "D:\scripts\Termination.csv"
$opencsv2 = import-csv "D:\scripts\RenewContractandNewStaff.csv"
foreach ($usertoaction in $opencsv)
$Trancode = $usertoactionTranCode
$StaffCode = $usertoaction.StaffCode.replace("=","").replace('"','')
$LastName = [string]$usertoaction.LastName.Replace("/","\/").Replace(",","\,")
$FirstName = [string]$usertoaction.FirstName.Replace("/","\/").Replace(",","\,")
$socialsecurityno = $usertoaction.SocialSecurityNo.replace("=","").replace('"','')
$DateJoin = $usertoaction.DateJoin.replace("=","").replace('"','')
$LastDateWorked = $usertoaction.LastDateWorked.replace("=","").replace('"','')
$Grade = [string]$usertoaction.Grade
$Dept = [string]$usertoaction.Dept
$LastUpdateDate = $usertoaction.LastUpdateDate.replace("=","").replace('"','')
$AccountExpiry = [datetime]::Now.ToString($LastDateWorked)
foreach ($usertoaction2 in $opencsv2)
$TrancodeN = $usertoaction2.TranCode
$StaffCodeN = $usertoaction2.StaffCode.replace("=","").replace('"','')
$socialsecurityNoN= $usertoaction2.SocialSecurityNo.replace("=","").replace('"','')
$DateJoinN = $usertoaction2.DateJoin.replace("=","").replace('"','')
$GradeN = [string]$usertoaction2.Grade
$DeptN = $usertoaction2.Dept
$LastUpdateDate = $usertoaction.LastUpdateDate.replace("=","").replace('"','')
$EffectiveDate = $usertoaction.EffectiveDate.replace("=","").replace('"','')
$LastName2 = [string]$usertoaction2.LastName.Replace(",", "").Replace("/","").trim()
$FirstName2 = [string]$usertoaction2.FirstName.Replace("/","").trim()
# Use DirectorySearcher to find the DN of the user from the sAMAccountName.
$Domain = [System.DirectoryServices.ActiveDirectory.Domain]::GetCurrentDomain()
$Root = $Domain.GetDirectoryEntry()
$Searcher = [System.DirectoryServices.DirectorySearcher]$Root
$Searcher.Filter = "(sAMAccountName=$samaccountname)"
$doesuserexist1 = $Searcher.Findall()
if ($doesuserexist1 -eq $Null)
{Write-Host $samaccountname "account does not exist"}
elseif ($StaffCodeN -match $staffcode)
write-host "user has renewed the contract, no action taken"
else
if(($lastupdatedate -ne $null)-or($LastDateWorked -ne $null))
write-host "Setting Account Expiry to"$accountexpirydate
#$ChangeUser.AccountExpires = $accountexpirydate
#$Changeuser.setinfo()
if ($UserMailforwarding -ne $null)
#Set Account expiry date to Last Date Worked
# $ChangeUser.AccountExpires = $accountexpirydate
# $Changeuser.setinfo()
write-host "staff" $displayname "with staff employee no" $samaccountname "has
mailforwarding"
Write-host "Please disable the account manually via Active Directory Users & Computers and
Elseif ($accountexpirydate -lt $todaysdate)
#disable the account

Hi Vicki,
This Forum has an insert-codeblock function. Using it will make your script far more readable
Your script is missing some parts, it is impossible to follow the problem.
You are performing the same string cleaning action on $opencsv2 for each element in $opencsv, when doing it once should suffice. Why not start it all by cleaning the values and storing the cleaned values in new arrays?
The Compare-Object function is great, why not take it out for a stroll on these lists, it might just safe you lots of unnecessarily complicated code ...
You are creating a new $Domain, $Root and $Searcher object each iteration, when doing it once should suffice. Probably not much of a time-saver, but every little thing contributes.
Try pinpointing the problem by doing extensive logging, not only by writing which action was taken, but writing the inidividual information (variables, mostly) before evaluation occurs. Your if/elseif/else looks sound, so if it's still not doing what you
want, the ingoing data must be different from what you think should be there.
Cheers,
Fred
There's no place like 127.0.0.1

Transport - Generation of the users of the transported Includes.

Hello. This isn't iSeries specific, but I posted it in the Netweaver Administration forums and got no response. I know this group is quite responsive, so I thought I would try my luck here. Thank you.
When importing a transport, there's a step during "generation of programs and screens" called: Generation of the users of the transported Includes.
Can someone tell me how the list of objects for 'Generation of the users of the transported Includes" is determined?
I'm practicing our upgrade in our test system and I've run a transport twice with very different results, from a timing perspective. I ran it once last week when doing the upgrade post steps. We deleted the system, started another practice run, and I ran the transport again today.
The first time the transport took 18 minutes to import. Today it took 2 hours. The load on the server was comparable both times. The difference I noticed was that the number of objects during phase: Generation of the users of the transported Includes was much greater this time - about 3000 more.
This is a big transport, all of our SPAU resolution, but I don't know why there would be an extra 3000 things to generate this time through.
If someone could explain this to me, I would appreciate.

Hi TJ,
at least SAP tries to generate the dependent objects. This is known, to not work really properly, but at least it is the idea. Might it be possible, that the system you were putting this transport in, had not generated most of the loads ? Then I could imagine, that it creates a lot more generation ...
Did you check, that the major difference was in the generation phase ?
I'm sure, that if you had a "good generated system" before, it will be faster again ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de

Is there a way to automatically add a page to my current form when the user marks the check box?

I have an existing expense report form that I created using Adobe Pro's Form Tools. The user enters all the appropriate information (ie, vendor, amount, business justification, etc.) and then it calculates all the expenses at the bottom.
I have added a box next to each line item to be checked by the user in the case that they have an expense with a missing receipt.
Is there a way to have a pre-existing missing receipt form, be added at the end of the expense report, each time the user marks one of these missing receipt check boxes?
If so, is there a way to have all the expense line item data automatically fill in the information on the added missing receipt form?
I am using Adobe Pro's Form tool rather than Livecycle because it is compatible with my IPAD.
Thanks,

One word: Templates
For more information, see: page: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_Dev_Templates.80.1.html
Unfortunately, templates don't work with Reader either, unless the document is Reader-enabled with LiveCycle Reader Extensions.

Return the User to the Calling Page - doesn't work

Hello All,
I set up the "Issue tracker" tutorial to get in tuch with the apex (htmldb vers. 2.0)
All is working well but: Return the User to the Calling Page -> doesn't work. I performed all steps as descriped in the tutorial (iclusive the '.' on the &P7_PREV_PAGE ;-) ).
I use my own aplication at home and followed all the instruction steps few times but it does not work. Can you help me please?
Do I have to install something more?
In the Branch section: * 1: Go To Page &P7_PREV_PAGE. (Unconditional)
In the Item section: 90: P7_PREV_PAGE Hidden
In the Button section for cancel Button: &P7_PREV_PAGE.
Here is the description of the function in the tutorial:
Because this Create/Edit page will be called from several places, when users finish with the display they should return to the calling page. To accomplish this, you create an item and change the branch on this page. Every time this page is called, the item must be set with the number of the calling page.
To create a hidden item:
1. Under Items, click the Create icon.
2. For Select Item Type, select Hidden and click Next.
3. For Display Position and Name:
1. For Item Name, enter:
P7_PREV_PAGE
2. For Region, select Issue Identification.
3. Click Next.
4.
Click Create Item.
Next, edit the Cancel button.
5. Under Buttons, select Cancel.
6. Scroll down to Optional URL Redirect.
7. In Page, enter:
&P7_PREV_PAGE.
Note the period at the end.
8. Click Apply Changes.
Next, edit the branch.
9. Under Action, enter the following in Page:
&P7_PREV_PAGE.
10. Click Apply Changes.
All steps are done but I still got the message: Error ERR-1016 Application "106" Page "0" not found (requested language="de")
OK
I move the mousepointer over the cancel button: javascript:redirect('f?p=106:0:5265993428922076876::NO:::')
Thank you for helping me!
best regards Thorsten

All,
I haven't looked at that tutorial for quite a while but just gave it a quick look.
Further down in the tutorial, it directs you to set the value of P7_PREV_PAGE, under Add Functionality to Support Adding Multiple Issues Sequentially - have you done that? There is also a mention that there is more branching to be done - "The branch you just created is looking for a value in P7_PREV_PAGE. Since the page was not called from another page, the value has not been set. You need to fix that next." It goes on to have you define that value from other places.
Can you describe what you are doing when you get the error? There could be something missing from the tutorial. A way around it would be to create a default value for P7_PREV_PAGE so that if it is not set, a default page will be used.
-- Sharon

When the user press the button Calculate Tax (see attached doc) and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.

When the user press the button Calculate Tax and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.
All setup looks fine.
Please let me know what can be done on this?
Regards,
Peu

HarryAustralia wrote:
I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
The iPad cover lock is for when you use a cover with magnets in it to lock and unlock the iPad when you close the cover or open it. Try running a refrigerator magnet along the sides of the iPad and see if that trips the iPad Cover Lock back into the settings.
That is not the same thing as the iPad Auto Lock setting which allows you to set an allotted time before the iPad goes to sleep.
You can try resetting all settings to see if the Auto Lock feature retinrs to the iPad.
Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. This can be a little time consuming re-entering all of the device settings again.

What is the difference between Business System and Business Service?

Hi
Please tell me what is the difference between Business System and Business Service...? In real time at what situation we will use Business System and in what situations we will use Business Service..? Please help me
Best Regards
Ravi Shankar B

HI,
Business system:
If you want to address a particular business system as the sender or receiver of messages, choose this service type.
A business system is an actual application system in a system landscape. A business system (service) comprises information about the inbound and outbound interfaces and the software component versions of the business system.
You usually use business system services when configuring internal company processes.
Business Service:
If you want to address an abstract business entity as the sender or receiver of messages, choose this service type.
Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
You usually use business services when configuring cross-company processes. In this case, you only make your interfaces known to the business partners involved and either do not make any details about your own system landscape available, or only specific details.
For example, you can define RosettaNet Partner Interface Processes (PIPs) as business services.
Regards,
Sudheer.

"File Dialog" Express VI returns the wrong path when the user selects the desktop

In labview 8.0.1 with Windows
XP, the File Dialog Express VI seems to return something other than the path
selected by the user when configured to browse for folders (or files and
folders) and the user selects the desktop.
I can't determine exactly when it works and when it fails, but it always seems
to fail if the user selects the desktop from the places bar (the shortcuts on
the left side of the dialog) or from the drop-down menu at the top of the
dialog and then clicks the "Current Folder" button to dismiss the
dialog. In this case it always returns whatever path is wired to the
"Start Path" terminal.
If the user navigates to the desktop with the "Up One Level" button
or by selecting the actual desktop directory under Documents and Settings, the
correct path is returned.
If the user selects a file before clicking the desktop icon, then clicks
"Current Folder" the correct path is returned.
If the user clicks the desktop icon, clicks open, then clicks "Current
Folder" the correct path is returned.
It's possible to work around this bug in most cases by setting the start path
to the desktop.
Has anyone seen this behavior before?
Can anybody verify this behavior by running the attached VI?
In the past, when I've reported issues like this I've received responses from
NI engineers that basically said "Thanks, but we already knew
that". Is there anywhere that users can search the list of known
bugs and avoid wasting time tracking down issues that are already understood by
NI?
Thanks,
Adam Brewster
Attachments:
File Dialog Test.vi ‏39 KB

I'm on 8.2 and I can't get it to fail no matter how I select the desktop. I haven't tried it in 8.0, but I imagine that if this really is a bug, they did know about it and fixed it with 8.2. If this causes a real problem for you, I would suggest upgrading if you can.

Avoid the deletion of delivery when the user press the delete button

Hi guys,
In VL02N transaction, when the user press the button for delete the delivery (trash button) i have to send an idoc to an external system in order to inform about. Im using IF_EX_LE_SHP_DELIVERY_PROC~DELIVERY_DELETION for this and it works fine.
After send the idoc i have to stop the deletion process. So How i can avoid the delivery deletion? I can change some flag in this BADI or maybe i can do something in userexit_delete_document? I dont find the way.
Thank you,
Manel

HI,
In the method SAVE_DOCUMENT_PREPARE; try to pass some error messages in the parameter CT_LOG.
This should raise some messages before saving and the data will not be saved and hence delivery will not be deleted.
Check the same.
Regards,
Ankur Parab

How to kill the session after the user exit the ADF application

Dear all
I have a problem
The problem is the session still exist after the user close the application and the browser. I want to kill all sessions that is not active.
This is my test scenario:
1- I open IE and run my ADF application that is deployed on weblogic. http://192.168.100.17:7001/myapp/faces/login
2- At the same time I issue this SQL command to view the sessions for user 'ADFUSER' - the "ADFUSER" is the schema user.
SELECT USERNAME,STATUS FROM v$session
WHERE USERNAME = 'ADFUSER';QUERY RESULT IS
USERNAME                       MODULE                                           STATUS
ADFUSER                         JDBC Thin Client                                 INACTIVE3- Now the user close the browser
4- Run the SQL again and I notice that the session still exist
SELECT USERNAME,STATUS FROM v$session
WHERE USERNAME = 'ADFUSER'RESULT:
USERNAME                       MODULE                                           STATUS
ADFUSER                        JDBC Thin Client                                 INACTIVE5- now the user open the URL again http://192.168.100.17:7001/myapp/faces/login
6-Run the SQL again , and I notice that the old session still exists and a new session created too.
SELECT USERNAME,STATUS FROM v$session
WHERE USERNAME = 'ADFUSER'RESULT:
USERNAME                       MODULE                                           STATUS
ADFUSER                        JDBC Thin Client                                 INACTIVE
ADFUSER                        JDBC Thin Client                                 INACTIVE
2 rows selected.and every time I login to the application , a new session is open and the old session still exist
I do not know why this happens
I want to kill old session when the user close the application.
These sessions are cleared only when i restart the weblogic domain.
here is some information about my development environment:
Jdeveloper 11.1.2.3
WebLogic Server Version: 10.3.5.0
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
thanks in advance

Hi,
for performance reasons you should not use dedicated user connections to the database. Instead you use JDBC data sources (default in JDeveloper for ADF BC) that you can configure the database connection pooling for. This means that your v$session will always show a set of active session, which however are shared among users. Assuming you use ADF BC, this is what happens
- A user requests a data bound page
- The ADF BC checks out an AM and connects to the database using one of the database connections in the pool
... user work here ...
- user exits application
- ADF BC returns AM to pool and passivates pending user state (if application is left with dirty transaction)
- Database connection is available in pool as soon as AM released
This also happens between requests. Long story cut short: v$session doesn't give you a true picture
Frank

How do i change the user on the new health app?

How do I change the user on the new health app?

alsastud wrote:
How do I delete the old User and create my own name and settings?
Really, the best way is to "fool" the system into thinking this is a first run system. To do this, you need to do the following
First, boot into single-user mode by powering the system while holding the cmd-S key combination down. This should bring you eventually to a black screen with a Unix terminal display. Type the following three commands (that period before AppleSetupDone is very important):
/sbin/mount -uw / <cr>
rm /var/db/.AppleSetupDone <cr>
shutdown -r now <cr>
What should happen is that when the machine reboots after the last command, you should get a "Welcome to MacOS" routine which will ask you for user information and set up your new account using that information.
After you get that done, you should, one way or another, be able to delete the folder of the old user in the Users folder, though you may need some help with that as well.

How do I restore the user to the home folder permissions?

I just got an iMac from a friend and had changed the username and password for the administrator user. Then I was going to change the home folder name. I was looking at the info on the home folder (which at this point is still tied to the old user). I inadvertantly removed the user from the permissions before adding the new username or even allowing all users to access the home folder. Now I cannot access the home folder at all. How do I restore the permissions to the home folder or add the user back to the allowed users with access to the home folder?

dalefromdallas,
First you should do a clean install of the computer, while your friend may have included apps, they do not belong to you unless your friend gave y ou the install media and license codes. Considering the machine is also running 10.9.2. this machine will be forever tied to his AppleID which exposes him financially. You should get the 10.6.X DVD from your friend (I'm assuming he upgrade from 10.6.x at some point) and do an erase and install, then update it to 10.6.8 then upgrade yourself to 10.9.2 Mavericks. Then you will have a clean system, otherwise you will be working with a pretty kludged system that will probably be trouble.

Time Spent by the user in the system and No. of transactions executed

Similar Messages

Maybe you are looking for