Time stamp data load

Hi Gurus
How can we upload time stamp data in BW
ex: 15/06/08 12:50pm, TO SINGLE INFOOBJECT,
need it now,
Thanks & regards
Ogeti

Hi,
You could use a routine in the transformation.
The routine would look something like this.
DATA: v_timestamp(14).
CONCATENATE sy-datum sy-uzeit INTO v_timestamp.
Result = v_timestamp.
You need not map any field. Just write the routine.
Assign points if helpful
Regards

Similar Messages

Date and Time Stamp - Data Code

I am trying to import HD video from a Sony video camera to iMovie, but require date and time stamp data code to display on the video. The computer imports the video in HD without problem, but does not display the data code information. Options allow for adjusting the date and time within the video clips, which proves the code is in there somewhere, but there are no options to display the date and time stamps.
I have previously accomplished this by running the camera in real time through a Pinnacle movie box, but this is time consuming, and hinders video quality, rendering in standard definition.
Can anyone please assist?
Thanks

Date stamp data is not something read by FCP ... try iMovie,
Alternatively, check the camera's output options, it may be possible to output the data burnt-in on the s-video or some such ... if you have the requisite i/o hardware you could then digitize from that signal path

Time stamp data write to file problem

Hello!
I'm just learning LabView, and have arrived at the stage of writing time-stamped data to text files.
This seems clear enough, however when I examine the file written to disk, I find 4 unexpected characters: 3 spaces and one seemingly random number or punctuation mark, preceding every line!
An example is:
   .2005-07-15 10:55:40.0 the value is 0.0000 cm
   .2005-07-15 10:55:40.5 the value is 1.0000 cm
The four characters "   ." are those whose origin I can't understand. I can't seem to get rid of them.
They seem to change with the input string, but not in a manner I can predict or understand.
Any hints or explanations would be greatly appreciated, as I'm at wit's end after 1/2 day of puzzling over this little problem!
Alex
Attachments:
time stamp data write VIs.zip ‏24 KB

Alex,
You found one of the subtle little things that can be frustrating to old-timers and newcomers alike. I did not recognize it until I read the help file (and I have been using LV since version 1.2).
First, the three characters before the commas are nulls (\00).
The reason they are there is in the help file for the Write File.vi. By wiring an array to the data input, you caused the VI to write a header telling what data format was used.
I modified your VI to simply concatenate the strings and then write a simple string to the file. I think this may be what you were after.
Lynn
Attachments:
write timestamp text line to file v3.vi ‏47 KB

Takes Long time for Data Loading.

Hi All,
Good Morning.. I am new to SDN.
Currently i am using the datasource 0CRM_SRV_PROCESS_H and it contains 225 fields. Currently i am using around 40 fields in my report.
Can i hide the remaining fields in the datasource level itself (TCODE : RSA6)
Currently data loading takes more time to load the data from PSA to ODS (ODS 1).
And also right now i am pulling some data from another ODS(ODS 2)(LookUP). It takes long time to update the data in Active data table of the ODS.
Can you please suggest how to improve the performance of dataloading on this Case.
Thanks & Regards,
Siva.

Hi....
Yes...u can hide..........just Check the hide box for those fields.......R u in BI 7.0 or BW...........whatever ........is the no of records is huge?
If so u can split the records and execute............I mean use the same IP...........just execute it with different selections.........
Check in ST04............is there are any locks or lockwaits..........if so...........Go to SM37 >> Check whether any Long running job is there or not.........then check whether that job is progressing or not............double click on the Job >> From the Job details copy the PID..............go to ST04 .....expand the node............and check whether u r able to find that PID there or not.........
Also check System log in SM21............and shortdumps in ST04........
Now to improve performance...........u can try to increase the virtual memory or servers.........if possiblr........it will increase the number of work process..........since if many jobs run at a time .then there will be no free Work prrocesses to proceed........
Regards,
Debjani......

Time dependent data load to BW using Fixed Time Interval selection

Hi,
I'm facing a problem in extracting time-dependent master data to BW. I would really appreciate if anyone can help in this regard.
We have a table in R/3 which has time-dependent data. For example, for a single OBJID we could have multiple records with different BEGDA/ENDDA and different attributes. When we try to load this data into BW InfoObject, we see a time-dependent data selection in update tab of infopackage. We need to select BEGDA/ENDDA in datasource since otherwise during loads we would get a "DUPLICATE RECORDS" load error in BW.
The problem is when we enter a Fixed-time interval Start Data and End Date in the InfoPackage, only the records with that StartDate and EndDate are loaded. Ideally I would want to see all the records whose BEGDA/ENDDA falls in the range of StartDate and EndDate.
I tried modifying the ROOSFIELD table for the data source. I made the BEGDA SELOPTS as GE(16) and ENNDA SELOPTS as LE(64). But still it doesn't seem to work. I checked if the change to ROOSFIELD has any affect in RSA3. Unless we give a range for BEGDA it doesn't seem to behave as expected. Could someone let me know how I can load all records to BW whose BEGDA/ENDDA fall in the range of StarteDate and EndDate.
Thanks,
Anil.

Anil,
If you are using a custom dataSource, make sure the dataSource fields for begda and ennda are labeled "datefrom" and "dateto".
Cheers,
T-

To convert time stamp (data element ARFCTIME (char 8)) into date and time

Hi All,
ARFCSDATA table stores time stamp value like 41C9EC9D or 41D2DA75 (in char8 format)...how to convert it to date & time?
Thanks in advance.
Vithalprasad

Hi All,
Thanks a lot for your response.
All these FMs are using timestamp which is having length of 14 or 16. .But in this case the field ARFCSDATA-ARFCTIME is having values in char 8 field and these values are in hexa decimal format.
Please pass the information in this regard if you have.
Thanks a lot.
Vithalprasad

Time of data load

Hi,
In the query, how to display the date and time of last data load?
Thanks.

Hi there,
There's a button named Information every time you execute a query that has that has that information.
Diogo.

Underlying RS Table :: Date & Time for Data Load Requests

Dear SAP BW Community,
In BW 3.5, does anybody know the underlying "RS" table where I can check to see the earliest date & time which a data target was loaded, by providing the data target's technical name in SE16 ?
Thanks!

OK, I've found the timestamp the data load requests in the table RSMONICDP.
To get the earliest data load for infoCube FRED, I'm going to Oracle via SQL*Plus, as follows:
select to_char(min(TIMESTAMP)) from sapr3.RSMONICDP where ICUBE = 'FRED' ;

Issue at the time of Data load

Hi Team,
While doing Import from data manager package syatem not loading the data and througing error.
Log as below:
Package:                     Import
Appset:                      RCOM1
Application:                 LEGALAPP
Request Time:                2009-03-31 04:58:14
Start   Time:                2009-03-31 04:58:14
End     Time:                2009-03-31 04:58:15
Total   Time:                00:00:01
TOTAL STEPS 3
1. Assign initial parameters:        completed in 1 sec.
2. Convert data:                     Failed in 0 sec.
[Selection]
FILE= DataManager\DataFiles\My Files\TB_FEB_2009_1.txt
TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\SYSTEM FILES\IMPORT.XLS
CLEARDATA= No
RUNLOGIC= No
[The list of conversion files in each transformation file]
Transformation file: DATAMANAGER\TRANSFORMATIONFILES\SYSTEM FILES\IMPORT.XLS
[Messages]
Convert data
The data file is empty. Please check the data file and try again.
I am using same members are there in dimensions and same dimensions. Because of this reason I havent used any transformation file for loading data into legal application.
Please help me in resolving this error.
Regards
Naveen.KV

Hello,
    It looks like the convert data task is receiving an empty file to load. Are you use the standardt Import package or a custom one?
    Please try to activate the debug information, adding the instruction DEBUG(ON) and verify the data into the file passed to the conversion task.
Regards,
Mihaela

How can I specify the PARTITION name at the time of data load?

Hi,
I have a table with 4 partitions. By using SQL*Loader I'm going to load data into the same. While inserting the records it should go to the 2nd partition only.
Where should i specify the Partition name?
Please clarify me with sample code.
Thanks.

Assuming that the partition is empty before the load, I would load the data into a temp table with the same structure as the partitioned table. After all the data is successfully loaded, exchange the partition of the table with the temp table using 'alter table ... exchange partition...'
Another question is, how is your table partitioned?
Message was edited by:
Jens Petersen

Increasing Max run time in DATA load

Hi,
I know to increase the maximun run time we have to set in the infopackage level or RSCUSTV2 or from Monitor
My question is how to increae the time for the dataload when the load is happenning.
Assume the r/3 job is running and the BW job is going to be red due to timeout setting. I want to extend this time out time during this dataload...
How to do that ?
Thanks

HI
Pvc
This is a basis job you will have to chnage the setting of the profile.
Tcode is RZ10
select your profile
look for max_wprun_time
you will have to increase it here
You will have to restart the server after doing this.
Contact your basis team to do this
Hope this helps
K.Mohan

Loading Time stamp from Flat File

Dear Experts,
     I thank you for your kind support and replies.
   Again I am stuck in a issue. So I need your help.
   We are loading flat file data into a cube/dso. The flat file contains time stamp field.
All the data are getting loaded properly except time stamp.
The field is taking system date and time of data loading.
I have taken the customized info-object like 0TCTTIMSTMP.
Kingly guide me, where I am going wrong.
Thanks,
Sanjana

Hi Experts,
      I am trying to load the flat file, the input format is attached below.
Creation Date
20,150,411,121,600
20,150,406,032,600
20,150,406,125,800
     but after loading into the ODS , the data is becoming
20150424102709
20150424102709
20150424102709.
   This means it is taking today's Date..
I have the checked the PSA level, there also the data is 20150424102709.
Also checked the Conversion Routine, it is maintained with TIMES.
Kindly suggest, what may be the cause or how can I work on this.
Thanks,
Sanjana.

Data load times

Hi,
I have a question regarding data loads. We have a process cahin which includes 3 ods and cube.
Basically ODS A gets loaded from R/3 and the from ODS A it then loads into 2 other ODS B, ODS C and CUBE A.
So when I went to monitor screen of this load ODS A-> ODS B,ODS C,CUBE A. The total time shows as 24 minutes.
We have some other steps in process chain where ODS B-> ODS C, ODS C- CUBE 1.
When I go the monitor screen of these data loads the total time the tortal time for data loads show as 40 minutes.
I *am suprised because the total run time for the chain itself is 40 minutes where in the chain it incclude data extraction form R/3 and ODS's Activations...indexex....
*Can anybody throw me some light?
Thank you all
Edited by: amrutha pal on Sep 30, 2008 4:23 PM

Hi All,
I am not asking like which steps needed to be included in which chain.
My question is when look at the process chain run time it says the total time is equal to 40 minutes and when you go RSMO to check the time taken for data load from ODS----> 3 other data targets it is showing 40 minutes.
The process chain also includes ods activation buliding indexex,extracting data from R/3.
So what are times we see when you click on a step in process chain and displaying messages and what is time you see in RSMO.
Let's take a example:
In Process chain A- there is step LOAD DATA- from ODS A----> ODS B,ODS C,Cube A.
When I right click on the display messages for successful load it shows all the messages like
Job started.....
Job ended.....
The total time here it shows 15 minutes.
when I go to RSMO for same step it shows 30 mintues....
I am confused....
Please help me???

TDMS viewer not showing data with time stamp

Need help with time stamping data in a TDMS file generated by DAQ Assistant.
When I use the TDMS Viewer, with the x-scale set to absolute time, the date starts at 1903. If I use Excel to look at the file the start time is correct (i.e. 2013).
Solved!
Go to Solution.

Bo_Xie, I have simplifed my VI and now able to display the correct time stamp. Thank for your time!

I used "Get Waveform Components" to separate waveform data. I need to get the time stamp and write it on file as an header.

I am not able to solve the problem because I can't find an I/O vi that writes on file time stamp data. An error occurs, because of connecting different data types. How can I convert time stamp data so that I can use it as input in a write on file vi? Please, help me!

The problem with the selection seems to be that you are using two different indexing tunnels on the for loop. One of them loops over every value of the first incoming waveform, the other one over all waveforms in the incoming array. The value you wire to the N terminal will be ignored, the number of loop executions will be the minimum of your indexes. Anyway, the loop doesn't seem to do what you wanted:
- If you want to store the complete waveform: loop over all waveforms, check for the maximum of each of them and write it just like you do now.
- If you want to store only the values of each waveform that actually exceeded the threshold: You can either use 2 nested for loops to iterate over each value of each waveform. Use shift registers t
o create new arrays of timestamps / values for the values you want to store. You need to either convert the waveform to x-y-pairs (VI on analog waveform palette) or calculate your own timestamps. You might as well want to check out the "Search waveform" VI. Configure it so that value+-tolerance covers the band between your expected minimum value and your threshold value. The VI will give you the indices and timestamps of all fits.

Time stamp data load

Similar Messages

Maybe you are looking for