How can I specify the PARTITION name at the time of data load?

Hi,
I have a table with 4 partitions. By using SQL*Loader I'm going to load data into the same. While inserting the records it should go to the 2nd partition only.
Where should i specify the Partition name?
Please clarify me with sample code.
Thanks.

Assuming that the partition is empty before the load, I would load the data into a temp table with the same structure as the partitioned table. After all the data is successfully loaded, exchange the partition of the table with the temp table using 'alter table ... exchange partition...'
Another question is, how is your table partitioned?
Message was edited by:
Jens Petersen

Similar Messages

How Can i specify multiple server names in rwservlet.properties file?

How Can i specify multiple server names in rwservlet.properties file without clustering?
I am using oracle 10g Application server. we have 3 servers Repsvr1, RepSvr2 and RepSvr3. Now i need to configure rwservlet.properties file to point to these servers based on any running report. i got 3 keymap files with reports info.
Sample entry in the key map file is:
key1: server=Repsvr1 userid=xxx/yyy@dbname report=D:\Web\path1\path2\reports\Report1.rdf destype=cache desformat=PDF %*
key2: server=Repsvr2 userid=xxx/yyy@dbname report=D:\Web\path1\path3\reports\Report2.rdf destype=cache desformat=PDF %*
rwservlet.properties file letting me to enter only one servername. Even though i merged all 3 keymap files into 1, still i have the server name issue. If i leave the server to the default name still i am getting the below error.
REP-51002: Bind to Reports Server Repsvr1 failed. However, i know the default rep_<servername> would be used incase we dont have SERVER=<value> parameter in the rwservlet.properties file.
If i specify the servername in the rwservlet.properties file then only Repsvr1 reports are working fine and other 2 server reports are giving the same error like
REP-51002: Bind to Reports Server <<Server Name>> failed.
how can i configure the info which will work all 3 reports. 2 Port servers are invoking using oracle forms and report server is invoking using ASP pages.
If i specify Server name & Key map file in rwservlet.properties one at a time, all the reports are working without any error, whenever i am trying to integrate all 3 to workable i am getting binding error. if i exclude the server from rwservlet.properties still i am getting the same error.

My RELOAD_KEYMAP setting is YES only.As i said If i specify Server name & Key map file in rwservlet.properties one at a time, all the reports are working without any error.
keymap file entries
key1: server=Repsvr1 userid=xxx/yyy@dbname report=D:\Web\path1\path2\reports\Report1.rdf destype=cache desformat=PDF %*
key2: server=Repsvr2 userid=xxx/yyy@dbname report=D:\Web\path1\path3\reports\Report2.rdf destype=cache desformat=PDF %*
If i use http://server.domain:port/reports/rwservlet? cmdkey = key1 should bring the report from Repsvr1 and http://server.domain:port/reports/rwservlet? cmdkey = key2 should bring the report from Repsvr2, but i am getting an error from Repsvr2 saying that REP-51002: Bind to Reports Server repsvr2 failed.
Only Servername Repsvr1 is in rwservlet.properties file. Now what is the best option to by pass the server from rwservlet.properties file and should be from keymap file. if i comment server name in rwservlet.properties file still i am getting REP-51002: Bind to Reports Server <<Server Name>> failed error for both keys.

How-can-i-remove-my-skype-name-from-the-sign-in-sc...

Guys this is absolute rubbish feature of the login application where people's login names get recorded in the dropdown menu. Is there any more permanent way of getting rid of this annoying privacy intrusive "feature"? I would like to have a profile with a username that is not going to appear at airports and my grandma's laptop after I log out of skype and no I do not want to go digging for app files to remove my entire history on each and every machine I use as suggested by your help files. Could you please advise if I'm missing something here?
https://support.skype.com/en-gb/faq/FA11070/how-can-i-remove-my-skype-name-from-the-sign-in-screen-i...

Unfortunately, the option to remove that feature is not available.
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive?

I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive?
I have tried bootcamp and have had no luck due to the fact that boot camp doesn't see the additional HDD space of 250Gb. What am I not doing?

Ouch, well there is a problem.
This is the stack of partitions on your old drive
EFI (hidden)
Lion (50GB say)
Bootcamp (50GB say)
Lion Recovery Partiton (hidden)
This is the same stack on your new drive imaged from the old one.
EFI (hidden)
Lion (50GB say)
Bootcamp (50GB say)
Lion Recovery Partiton (hidden)
Emtpy Space (100GB say)
This is what you want
EFI (hidden)
Lion (100GB say)
Bootcamp (100GB say)
Lion Recovery Partiton (hidden)
EFI has to be at the top of the drive and Lion Recovery has to be at the bottom of the drive.
And you only have four partitions.
You can't move the Lion Recovery Partition or Bootcamp partiton, however you can expand the Lion Partition into empty space below it. (but can't delete or move the Lion Recovery partition)
Your Duplicator duplicated perfectly, too perfectly Likely would work with same sized drives/partitions.
This is what your going to need to do.
You need to move the Bootcamp partition to a blank external drive using WinClone and disconnect. This is so you have two backups of it. (one on your old 500GB drive)
You will need a drive enclousre or IDE/SATA to USB adapter cable for the older 500GB drive and option key boot from it. (some enclosures can't be booted from so check first Other World Computing is good place to ask)
Download the free Carbon Copy Cloner, grab any new files off the new 750GB internal drive to the old 500GB your booted from.
Open Apple's Disk Utility and Erase with Zero option the entire internal 750GB drive and let it rip, this will map off as many bad sectors and improve reliability.
Now use Carbon Copy Cloner to clone the 500GB Lion + Lion Recovery Partitions to the internal 750GB, it will "fix" things and place Lion Recovery at the bottom of the drive where it belongs, give all the extra space to OS X Lion.
Next your going to have to follow WinClones instructions to restore your Bootcamp, likely you will have to recreate the Bootcamp partition first (in Bootcamp) to the size you want and then clone. Likely Winclone may "fix" Windows to recognize it's in a new larger partition now. I don't know you'll have to check as I haven't used it.
When Bootcamp creates the partition it will place it near the bottom next to the Lion Recovery Partition.
As you know you will have to re-validate Windows with Lord Redmond or it expires as you changed the hardware.

How can I set screen saver clock which show time and date when all screen is black. Other phones have this option but I didn't find on iphone. Pl guide.

How can I set screen saver clock which show time and date when all screen is black. Other phones have this option but I didn't find on iphone. Pl guide.

HA! I figured the find my iphone out!!!!! You can have more than one icloud account in "Mail, Contacts and Calendars". So my husband's & kids' phone icloud account under "settings, icloud "is their individual @me.com account. Set it to everything you want EXCEPT Find My Iphone. Then under "settings, mail/contacts/calendars" you set up both accounts (your @me.com which may already be there), then add another with the main appleID and enable ONLY Find My Iphone. Now when any of us log into Find My Iphone from any device with our main apple ID for the app store, all the devices show up!!!! YIPPEE. I made my own day!
I think the message I got previously was because I hadn't disabled the find my iphone on the @me.com account first.

How can I remove old calendar names from the iTunes sync list?

I gave my calendars new names as part of reducing the total number of calendars in my iCal, and now iTunes still lists the old calendar names as well as the new ones in its "selected calendars" list, even though these names are no longer present in my iCal nor on my iPod Touch. How can I remove the old calendar names?

The "genius" folks at the Apple Store lived up to their names. The key was to reset the iSync history in the iSync Preferences.

How can I show Foreign Key name in the Data model Table window

Hi,
In one of my table, I had a Foreign Key, but that is not indexed. I want to display the name with in the table second window in realtional data model. If it is indexed, then it is showing in third window. How I can show without indexing that column?
Thanks.

I want to show Foreign Key name in the second window.
Thank you for considering my question,
Sundar

How can I specify an area path for the work item created on build failure?

In our department we are working with multiple build definitions for different parts of one Team project. We heavily use the Team Project feature. Teams are defined by area path nodes, so each team can only see it's area path. No one (except the admins)
can see the root project node.
When a build breaks, TFS generates a Bug. Unfortunately, this bug is assigned to the area path root node, so nobody can see the generated bug and act on it.
We would prefer to specify the area path for the generated work item in the build definition (not template, but property of a build definition), as every build belongs exclusively to one team.
I have found that you can populate fields of the generated work item by filling the "custom fields" of the "create work item" activity. But how do I set the area path as a parameter?
Guenter

Hi Cuenter,
Thanks for your post.
You should set the value like below in that activity:
New
Dictionary(Of
String,
String)
From {{"Area
Path",
"teamprojectname\areaname"}}
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can I specify where to look for the server installation of the Oracle client?

I assume changing the $ORACLE_HOME variable would get ORE to use 12.1.0.2 instead of 11.2.0.3, but I only want to change which Oracle R uses. How can I override the server's $ORACLE_HOME location when I'm connecting to the database from the client side?
OS: Linux Mint 17 / Solaris 11.1
R version: 3.1.2 (both)
ORE version: 1.4.1 (both)

On the server, the Oracle R Enterprise installation is tied to an Oracle Database installation. Have you installed Oracle R Enterprise for both the 11.2.0.3 and 12.1.0.2 databases?
If so, the client connect will be able to find the ORE server when you connect to the database using ore.connect:
R> ore.connect(user = "username", sid = "database sid", host = "hostname/database server", password = "user password", all=TRUE).
During the ORE installation on the server, we lay down software bits on the OS, install a schema into the database, plus add some libraries to $ORACLE_HOME.
Sherry

How can i assign view page name at run time in task flow

Hi,
jdev 11.1.2.3.0
I have a requirement to get view page (jsff page) dynamically.
Ex: I have TF in that i have two views i.e view1 and view2. in view1 there is one inputtext and button in inputtext i will give the name of the page, In view2 that particular page should be displayed.
Input Text                 View2
Employee                Employee Page
Department              Department Page
How can i implement this ?
Thanks,
Nitesh

Use a router in your task flow and point to the page you want to display according to the value entered in the input text.
A sample on how to use this technique can be found here http://tompeez.wordpress.com/2011/11/27/jdev-11-1-2-1-0-using-router-to-conditionally-set-navigation-target/
Timo

I have an external hard drive that is partitioned three ways. I have made an install disk out of one partition. How can I use this partition, and not the whole drive with bootcamp assistant?

See title.
When the drive is plugged in, boot camp assistant says that no installer can be found, but the application doesn't list the three separate partitions like finder/disk util does.
I am using a mid-'12 retina mac running os X 10.9
Hopefully this is an easy fix.
Thanks in advance.

Hello,
I have just experienced the same thing!
Although my external drive shows in Disk Utility, it does not show in Finder.
And the Verify/Repair buttons are also greyed out.
Also, although the drive is 2TB. DU shows it as having Total Capacity of only 4.14GB! (Which should be the Free Space).
I was wondering if you solved your problem, & if so, would you share your solution.
I´m afraid to Erase in case I lose all my Data on the drive.
Thanks in advance for your reply!

How can i give 2 different names for the same attribute in querypannelVC

Hi
I have a View criteria and exposing as a query panel.In the VC, we are using one VO attribute instance twice"FullName".We have a requirement of display 2 different names for this attribute in the query panel Ui.Attached the VC screenshot.
Ex:Present in the Query panel Ui fields are displaying like
FullName
FullName
Requirement:
Owner
Assignee
Thanks in Advance,
Naga

Hi Thanks for the reply..So are you saying like add the same "FullName" attribute twice with different Alias Names(Owner,Assignee) ?But here we are having the FullName as common and depends upon role we are displaying "Owner" or "Assignee".If i create two instances for same attribute will it not be like redundancy ?

How can we specify the Mailbox for Notes?

In Mail.app, how can we specify the Mailbox for Notes (where the new notes will be resided)? It is now 'On My Mac'. I wish to change to my IMAP Mailbox so it sync with my iPhone by just checking email (not by syncing on iTunes).
Thanks in advance.
Message was edited by: Ekapon

You could use the DecimalFormat or NumberFormat to do the job.
double number 1234.567;
DecimalForamt df = new DecimalFormat("###.##");
String s = df.format(number);or
double number 1234.567;
NumberFormat nf = NumberFormat.getNumberInstance();
nf.setMaximumFractionDigits(2);
/* if needed.
   nf.setMaximumIntegerDigits(value);
   nf.setMinimumFractionDigits(value);
   nf.setMinimumIntegerDigits(value); */
String s = nf.format(number);I didn't test the codes but they should work. For more information, please consult the documentations.

How can I specify the default tab in a CHM Output?

My company uses CHM-based help for some of its products. We build the CHM files from RoboHelp 9, and while these CHM files don't really have a full Index attached to them, the Index tab shows up in the output anyway. Unfortunately, we are suddenly seeing that when the CHM file is launched from our program, the Index tab is displayed by default. We'd rather have the Contents tab be the default look, especially considering that the Index does not exist.
I have poked around into how you can specify a default tab for a CHM file, and the only information I have found suggests that using a CHM file creates a file (HH.dat) that specifies which tab should be displayed on a user-by-user basis, and that the last tab displayed when you close the CHM should be the first one displayed when you re-open it. While this is true if you open the CHM independent from the product, when you launch it from our program, it's all Index, all the time.
So, my question is: How can I specify the default tab for a CHM file? Or, failing that, how can I excise the Index tab from my CHM output.

Hi there
This will be something up to your application developer to resolve. When s/he issues the call to open the CHM, there are parameters that may be used to always open with the desired tab "in front".
Point your developer to the link below and advise that s/he is most likely interested in the section titled: Programming Tips.
Click here to view
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

How can I set the Object Name to the file name on import?

All-
I've been manually typing the filename into Aperture's Object Name metadata field. Is there a way to do this automatically? I use metadata presets to fill in many other fields on import but haven't found a way to set metadata fields on a file-by-file basis.
Perhaps there's a way to do this with the thousands of images already in my library as well...
Thanks,
Andreas

Here's the cleaned-up version:
tell application "Aperture"
set selectedImages to the selection
repeat with i in selectedImages
set tName to name of i
set value of IPTC tag "ObjectName" of i to tName
end repeat
end tell
Some other related bits, which you can probably work out how to put into the above script:
Find out the AppleScript names of the IPTC tags (but only tags which have a value for that image), the names will be listed in the 'result' pane in the Script Editor:
tell application "Aperture"
set selectedImages to the selection
get name of every IPTC tag of item 1 of selectedImages
end tell
The same for EXIF tags:
tell application "Aperture"
set selectedImages to the selection
get name of every EXIF tag of item 1 of selectedImages
end tell
And for any custom tags you have set up. If you haven't set up any custom tags (one of my main reasons for going with Aperture) this will just return camera and picture time zones:
tell application "Aperture"
set selectedImages to the selection
get name of every custom tag of item 1 of selectedImages
end tell
Finally, keywords:
tell application "Aperture"
set selectedImages to the selection
get name of keywords of item 1 of selectedImages
end tell
To grab the first keyword name try 'name of keyword 1 of...' etc.
To grab the parent keywords for hierarchical keywording stuff try experimenting with 'get parents of keywords of'. The keywords seem to be read-only from AppleScript, so a magic script that added all parent keywords doesn't seem to be possible.
Ian

How can I specify the PARTITION name at the time of data load?

Similar Messages

Maybe you are looking for