Time Zone issue with 7.0 and DB2

Hi,
We are having a time zone issue with weblogic server 7.0 and DB2 database. I would really appreciate if somebody provides a solution for this issue.
Our db2 DB is located in PST time zone and weblogic server is located in EST time zone.
When we access current timestamp from db2, we are getting PST time converted to EST and EST time zone attached with timestamp value.
I tried to use resultset.getTimeStamp (1,<calendar>), unfortunately this method is not supported in the DB2 driver version I am using.
We want to get same value as returned by db2 with db2 time zone not weblogic server time zone.
And also when we add new record with timestamp column through web service, regardless the time zone value sent by web service client ".Net" ,
Weblogic server converts the java.util.Date value to weblogic time zone and stores in the db.
For example, client sent 17:00 hours CST, but when it gets stored in db through weblogic ws, weblogic converts 17:00 to 18:00 EST and stores in database as 18:00 hours without any time zone. When we read this value back, we are getting it 18:00 EST only not 17:00 CST.
This is fine as long as writing and reading by same weblogic server. If another weblogic server instance in PST time zone read this value, it takes as 18:00 PST.
Due to this our application always shows timestamp hours differently.
Could some body help me to fix this problem, we are getting this problem in production after we moved our DB2 location to different time zone.
Thanks
Balaji

Hi,
Check whether document in the link below is of any use for you..
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAGTFTIM/CAGTFTIM.pdf
Regards
K.M.Arun

Similar Messages

Time Zone issues with iCal 2.0.3?

I've been using iCal for a while now, and haven't had any problems until just recently. For some reason, meeting notices sent to me from Outlook (Windows XP) now appear in iCal with times for Africa (I am based in Arizona, and the people sending me the invitations are also based in the same office in Arizona). I have Time Zone Support turned ON in iCal, and the times on the PCs are set for the proper time zone as well.
The other problem is that when I reply to the invitation, Mail sends the acceptance like before. The sender receives this acceptance as an email (with my time zone being in Africa instead of Arizona), but Outlook no longer registers/updates the response.
Is anyone else out there having these issues? I have all of my Apple software up-to-date. Thanks.
G5 dual 2.3GHz Mac OS X (10.4.5) 1.5GB RAM, 2nd 250GB SATA internal HD

I don't know if this helps anyone, but I went ahead and turned time zone support OFF. I still get the meeting invitations which are off by 7 hours, but when I accept the invitation, it shows the correct time for Arizona but still has Africa in parentheses after it. It is only a workaround, but at least I know what the correct time of the meeting should be. Does Apple know that this latest release of iCal is seriously flawed, and are they going to do anything to fix this problem?
It is frustrating because iCal used to work flawlessly with Outlook up until recently, and nothing has changed on my end.
G5 dual 2.3GHz Mac OS X (10.4.5) 1.5GB RAM, 2nd 250GB SATA internal HD

New Time Zone Issue with MobileMe Calendar Upgrade

I'm having strange things happen with sending/receiving "invitations" to people in other time zones.
Prior to this MobileMe calendar upgrade, sending/receiving invitations worked fine. I would schedule an event (obviously in my time zone), and if I invite a friend in a different time zone, the event would show up on her Google Calendar at the proper time. Between iCal and Google Calendar, the time zone translation was working properly. Likewise, when she scheduled an event and sent me an invitation, the event showed up in iCal at the proper time for me.
But now, after simply upgrading MobileMe calendar, events from me to her show up at the wrong time! It's as if the time zone translation is no longer occurring. Oddly, events that she sends to me still work correctly.
I have "Turn on time zone support" enabled in iCal, MobileMe calendar, and on the iPhone.
So this very nice feature that was working previously seems to have broken with the MobileMe calendar upgrade.
Has anyone else seen this, or (hopefully) solved it?
Thanks!
Jim

...anyone?

Time Zone issues with iphone 3GS running ios4

My iphone calendar reminders have been behaving strangely since the ios 4 upgrade. I checked time zone support and it was set to my current city (Indianapolis, EST). Phone has been recently synched, and is otherwise behaving normally.
I travel occasionally to Chicago which is in CST. I noticed when I was there that reminders were coming up at the meeting's posted time. E.g. at 9:00 am when I was in Chicago I was getting reminders for 9 am meetings in Indianapolis (by which point the meeting had already occurred).
When I returned to Indy, I am still getting notifications at odd times - I got a reminder at 12:15 pm that a meeting would be starting at 12:30 pm. The meeting was actually set to start at 1:30 pm.
My next step is to reset the iphone, but this seems like a buggy situation. I hope I don't need to make it a normal part of my not-infrequent travel across the time zone borders to reset my iphone.

I have a 3G and also have this issue. I am in EST and travelled to CST. Since I got back, my reminders are showing up 1 hour too early. I am going to do a hard reset and see what happens. Let me know if you find a solution.

HT2513 I am having time zone issues with certain calendar requests

There are certain calendar requests I receive via calendare attachment via email that do not align to correct time based on originating time zone. Currently I am in the Central Time Zone and these certain requests come from Eastern Time Zone users. I have looked at time zone settings and all settings appear correct. However, when I look at calendar request to edit the request, it shows that the time zone is central time zone in request.

There are certain calendar requests I receive via calendare attachment via email that do not align to correct time based on originating time zone. Currently I am in the Central Time Zone and these certain requests come from Eastern Time Zone users. I have looked at time zone settings and all settings appear correct. However, when I look at calendar request to edit the request, it shows that the time zone is central time zone in request.

Is the Time Capsule wi-fi router compatible with the Nest thermostat? I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?

I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?
If so, i already have a wi-fi router, so can the Time Capsule simply be used for wireless backup instead of as a router if there is conflict?

A TC is fundamentally a AE with a sata chip included to drive the hard disk. Some slightly different bios to include disk functions, although most of those are also on the AE. So as a router it is 99.999% identical.
And yes, if you have another router you can easily bridge the TC and use wireless for backups and internet connection. Once you no longer route through the TC the issues with most NAT problems including port forwarding should disappear.. mostly this is due to all apple routers using NAT-PMP instead of upnp which is the near universal standard for opening ports.. without upnp apple keep their routers more exclusive.

Time zone issue when copying Outlook/Mac invitation to iCal or adding it via iPhone/iPad calendar

Hello everyone,
I'm facing a situation when every time I receive an invitation comes from a different time zone neither iCal, iPhone’s Calendar nor iPad’s Calendar recognizes it correclty.
Below there are a couple of examples, but before, a few information about my environment: Mac OS X Lion with Outlook for Mac (non-exchange user), I’m using iCloud, and my iPhone and iPad are running iOS5. And BTW, I’m not intending to sync anything with Outlook… I know it does not support iCloud syncing, I just trying to live without that.
First example.
I got an invitation to a meeting on Monday 5pm-6pm CET, but I’m in GMT-2. It should appear to me as an event to occur on Monday2pm-3pm (GMT-2). In fact only Outlook shows the right time, however when I dragged and dropped that appointment from Outlook’s calendar to iCal it was copied but is did not consider the time zone, that means in the iCal, the appointment was set to occur from 5pm-6pm (GMT-2), instead of 2pm-3pm (GMT-2).
Second example.
I created an appointment in Outlook by myself, jsut to check if that would be something related to the senders’ computer (Outlook/Windows user), then I set that meeting to occur on Friday 5pm-6pm (UTC+1) and I sent an invitation to a friend of mine (Outlook/Mac User). In my Outlook the appointment was created correctly, that means, on Friday 2pm-3pm (GMT-2), however, when I copied that meeting to iCal it did not consider the time zone, appearing to be Friday 5pm-6pm (GMT-2), and when my friend opened the invitation in his iPhone, which is also set as GMT-2, that also appeared to him as a meeting on Friday 5pm-6pm (GMT-2).
I also checked all possible time zones configurations, in the iPhone, iPad, iCloud and in my MacBook (iCal and Outlook)…all time zones are enabled and configured as GMT-2.
As an last shoot, I decided to download a third-party software, which is integrated with iCal and iCloud, in order to check if that could be an Apple’s issue. I downloaded and installed the BusyCal (from BusyMac). And guess what?! When I dragged & dropped the same meetings I described above from Outlook to BusyCal, it worked perfectly!! And BusyCal sent the proper information to iCal and my iPhone/iPad over iCloud. Which means: #1 there would be no issue with my configurations, and #2 BusyCal does really takes into consideration time zones, which is something that Apple’s calendars looks like do not.
It will not solve the issue I'm having with my mobile devices, but at least is a workaround… BTW, an expensive workaround, because BusyCal costs $49, by now I’m using the 30 days trial version.
So friends, is there anyone who could help to find a real solution J , or at least, a free workaround L
Thank you in advance and I apologize for this “article”.
PS: I've been using Mac for 4 years now, and this is the first time I was stucked ina situation like that... and I don't know who to blame... Microsoft or Apple? This I know... syncing Apple's calendars with Microsoft's calendars, should be effortless... and it is always a pain in... that place...

I am having a similar problem: invitations sent (presumably from outlook), when accepted from my iPad, appear in the calendar with the wrong time zone.
this actually happens even when the meeting is in the same time zone I'm in: I am in GMT -5, and even when the meeting is in GMT-5, it defaults to GMT (or, in some instances, PST). My settings have my time zone set correctly.
Any help much appreciated.
PS: Using iPad original wit iOS5

Calendar Event Invites - Time Zone Issue

Hi all!
I just switched back to BlackBerry from iPhone, and love everything about it so far except one thing: time zone issues on calendar invites.
My work uses an OS X hosted CalDAV server, and I was able to sync my existing calendars to it without issue.
My time zone: Eastern
My coworkers timezone: Central
The Issue: I received an invite from a coworker, and on my Mac, it shows at 1PM Eastern, as it should. The invite was sent for 12PM Central. This same invite appears on my BlackBerry at 7AM Eastern.
Testing completed:
I added an invite on my BlackBerry for 6AM Eastern as a test, and it appeared on my Mac at the correct time without issue.
I added an event on another day from my Mac, and it synced to my BlackBerry without issue.
So it seems that my issue only exists when recieving event invites from others, possibly in different time zones.
My Mac and BlackBerry are both set to Eastern time.
My coworkers Mac and iPhone are set for Central time.
I looked all through the BB settings and cannot find anything that would account for this odd behavior.
I tried a battery pull - same results.
I am on the latest OS available for a Q10: 10.2.1.2976
Can anyone help with this? I would hate to have to go back to iOS for one issue like this, however, an accurate and reliable calendar is critical to my work.
Solved!
Go to Solution.

Try this, for a test.
Set your Q10 to GMT Timezone.
Open the calendar, your invtes should be ~5 hours ahead.
Set your TZ back to Eastern.
Check your specific event mentioned above which was at 7am Eastern.
Is it correct now?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Time Zone issues EDT to PDT conversion. Really need help!

Have a question regarding conversion from EDT to PDT time zones and on different Java versions...
If you compile the program below and run it using JRE 1.6, 1.5 versus 1.4, 1.3 it gives different results. Maybe somebody has an answer:
Here is the code:
import java.text.*;
import java.util.*;
public class Moh {
        public static void main(String[] args) throws Exception {
                SimpleDateFormat timestampFormatWithZone = new SimpleDateFormat("yyyy-MM-dd HH:mm z");
                Date date = timestampFormatWithZone.parse("2007-06-06 14:00 EDT");
                System.out.println(date.toString());
}Copile it and run using these two options. The one with
New York shall show you 2pm or 14:00 and when using the
second one output changes:
java -Duser.timezone=America/New_York Moh
java -Duser.timezone=America/Los_Angeles Moh
If you use JRE 1.6 or 1.5 second option will give you 12:00; if you
use JRE 1.4 or JRE 1.3 it will show 11am or 11:00
I think that 11am is correct! Is there any issues with newer JREs and timezone conversion. Or am I missing anything?
Thank you so much for your help!

Yes, there are issues. See the following from Sun Microsystems
Sun(sm) Alert Notification
    * Sun Alert ID: 102836
    * Synopsis: Olson TZ Data (tzdata2005r or
greater) Incompatibility Issues
    * Category: Availability
    * Product: Java 2 Platform, Standard Edition
    * BugIDs: 6466476, 6530336
    * Avoidance: Upgrade
    * State: Resolved
    * Date Released: 08-Mar-2007
    * Date Closed: 08-Mar-2007
    * Date Modified:
1. Impact
The introduction of Olson Timezone (TZ) data,
version 2005r or greater, may break backward
compatibility for the Eastern, Hawaiian, and
Mountain time zones, under certain circumstances.
This issue is also outlined in Sun BugIDs 6466476
and 6530336, listed at:
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6466476
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6530336
Note: The Hawaiian TZ is only affected for
historical data. Other American TZs such as PST and
CST are not affected.
2. Contributing Factors
This issue can occur in the following releases for
all platforms:
    * JDK and JRE v1.4.2_12 and above
    * JDK and JRE 5.0u8 and above
    * JDK and JRE 6 and above
Notes:
   1. Releases below Java SE v1.4.x are not affected
by this issue.
   2. The condition will also exist if you have run
the "Time Zone Updater Tool" for v1.4.x+, but
without the -bc flag.
This condition will be apparent under one of the
following two circumstances:
A) The use of old 3-letter TZ IDs, limited to:
"EST", "HST", "MST".
Or:
B) The parsing of date strings containing one of the
following three TZ strings: "EDT", "HDT", or "MDT".
3. Symptoms
The symptoms/result of this condition will be that
Daylight Saving Time (DST) will be calculated
incorrectly.
4. Relief/Workaround
There is no workaround for this issue. Please see
the Resolution section below.
5. Resolution
To resolve this issue (ie. to enable support for the
backward compatible DST timezones), run the "Time
Zone Updater Tool" for v1.4.x+ with the command line
options:
    -f -bc
Complete instructions for running the tool can be
found at:
http://java.sun.com/javase/tzupdater_README.html
Note: If you have already run without the -bc flag,
you will need to rerun with the -f -bc flag to
correctly resolve the 3-letter TZ abbreviation issue.
The -bc options will result in the deletion of the
files:
    * JAVAHOME/jre/lib/zi/EST
    * JAVAHOME/jre/lib/zi/MST
    * JAVAHOME/jre/lib/zi/HST
There are no known side effects to removing these files.
Install Issues :
In the unlikely event of unforeseen issues (e.g:
such as power loss or I/O Error) restore the JRE
Time Zone files to their original state by:
A) following the instructions at
http://java.sun.com/javase/tzupdater_README.html#remove
Or:
B) removing and then reinstalling the JRE or JDK.
The update may now be re-applied by running the TZ
Updater Tool (with the proper command line options)
as listed above.
For additional information on issues, products, and
resources for DST changes, please also see:
http://www.sun.com/dst
This Sun Alert notification is being provided to you
on an "AS IS" basis. This Sun Alert notification may
contain information provided by third parties. The
issues described in this Sun Alert notification may
or may not impact your system(s). Sun makes no
representations, warranties, or guarantees as to the
information contained herein. ANY AND ALL
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION WARRANTIES OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE
HEREBY DISCLAIMED. BY ACCESSING THIS DOCUMENT YOU
ACKNOWLEDGE THAT SUN SHALL IN NO EVENT BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, PUNITIVE, OR
CONSEQUENTIAL DAMAGES THAT ARISE OUT OF YOUR USE OR
FAILURE TO USE THE INFORMATION CONTAINED HEREIN.
This Sun Alert notification contains Sun proprietary
and confidential information. It is being provided
to you pursuant to the provisions of your agreement
to purchase services from Sun, or, if you do not
have such an agreement, the Sun.com Terms of Use.
This Sun Alert notification may only be used for the
purposes contemplated by these agreements.
Copyright 2000-2006 Sun Microsystems, Inc., 4150
Network Circle, Santa Clara, CA 95054 U.S.A. All
rights reserved.

Issues with Exchange Account and Q10

Well, I hate to be writing this, but I'm hoping that there might be someone out there that can help get past some first day issues I am experiencing.
The background: I have a long history with legacy BlackBerry devices, and almost as much history with iOS devices. My most recent phone was an iPhone 4S, and I make extensive use of iCloud to keep my iMacs, iPhone, and iPad connected in real-time. The setup worked. It wasn't perfect, but it worked. However, because I used to have a BlackBerry device (most recent the 9930) and because I don't use the iPhone for more than e-mail, iMessage, and phone calls (generally speaking), I decided to give the newest BlackBerry device a shot. So I bought a Q10.
At this point I feel compelled to say that the hardware is everything I had hoped it to be. It's solid, has a good weight, and appears to be made very well. I have no complaints with the hardware, including the keyboard (a big selling factor for me), so I won't really get into the hardware as the issues I am experiencing all have to do with the OS. Let me also say that I am very familiar with the iCloud integration issues (missing Contact photos and disabled Calendar sync), so I'm not voicing a complaint over those issues in this thread.
I have connected my Exchange account. I used to have everything in Exchange before I moved my entire computing world over to Apple, and now I keep Exchange around for e-mail. Therefore, I have no contacts, no tasks, no notes, very limited calendar entries, and a massive amount of e-mail on the Exchange server. However, to test everything out, I have added a single contact record so I can see it show up on the phone and be able to test two-way sync between the Q10 and Exchange. And here is where the first issues crop up. It looks like Exchange connects and then disconnects at random. For example, if I open my Contacts on the phone, I see the one contact (called John Doe). Then, as the phone is sitting there with the screen on, the contact will disappear and I will see a "Start adding contact to your contact list" notice on the screen. Then, after a short period of time, the single contact will return. It is important to note that the entire time this is happening, the All Contacts option is selected in the list so that all available contacts are shown. Additionally, I have SIM card contacts turned off, but if I alter the selection in the view list (All Contacts, Favorites, etc.), the SIM contacts will re-appear when I return to the All Contacts view. At the same time, even though I have turned off SIM Contacts in the settings, the setting has reverted to show SIM Contacts. If I turn off the setting again, SIM Contacts still show up. Possibly related: I can't delete contacts on the SIM card, no matter how many times I try, and it now it seems that I can't get SIM Contacts to go away in the Contacts app.
Likewise, Exchange seems to connect and disconnect from Calendar. I go to the calendar and move day by day to June 15th. I see an entry that I know is from Exchange (I have no other connected calendars at this time), and it is in blue. I change the calendar color to green and the entry changes color, as expected. However, if I jump back to today and then scroll day by day to get to June 15th again, the calendar entry is missing. After a few seconds, the entry re-appears, but it is, once again, in blue. The setting has reverted itself, and it seems like Exchange is completely disconnecting and automatically reconnecting to the phone like I am setting it up again for the first time. Very odd. As I'm typing this, I just saw something odd. I swiped to wake up the phone, and the active frames screen was the visible screen. The calendar app is still running (since I left it running, minimized, when the phone went to sleep) and the date shown in the active card was Jan 1, not Jun 8. Why? The date (and time) on the phone is correct and is set automatically by the cellular system.
Nevertheless, looking at BlackBerry Hub, I see only two e-mails in my Inbox from Exchange, even though I have roughly a dozen in my Inbox. The rest are filed in sub-folders. And bam! Just like that... I get the "Add Accounts" screen while looking at the Hub. In other words, as I was typing this, I first saw two Exchange e-mails and then, out of nowhere, the e-mails disappear and I see the "Add Accounts" screen as if no account has been connected.
So... first question: Is anyone else experiencing this issue? This is very strange, and very frustrating. Second: could this be related to the large amount of e-mails I have stored on Exchange, some of which have large attachments? I selected "Forever" as the sync history length. I have my concerns, however, if this is related to loading historical e-mails onto the phone (in other words, the first sync with Exchange) because there is no reason that I can understand that the phone would blank out as if no account was connected at all. I can understand lag and stuttering while the history is syncing, but not a complete disconnect and reconnect. Considering all of the issues with the one and only contact record disappearing, the calendar entry for Jun 15th disappearing and then reappearing with the wrong calendar color, and e-mail in my Inbox incomplete (two of a dozen e-mails) and ultimately disappearing, I feel like this OS just has some real, significant issues.
Full disclosure: I do want iCloud to work and am a fan of Apple products, but the lack of full iCloud sync support is not a big enough issue for me to want to send back this phone and/or see it fail so miserably. I will happily move my info from iCloud into Exchange, Google, and/or set up a new Exchange account for personal use (Office 365) because I am not wedded to iCloud per se. But, I won't go through that trouble if I can't even get my first account to work properly. It should also be noted that I do have a basic Google account (non-paid) and I had previously attempted to connect to it. However, I was experiencing the exact same issues with contacts disappearing, e-mail disappearing, etc. So I deleted that account. Truth be told, I deleted the Exchange account as well, and then re-connected to Exchange only to test one account at a time. Unfortunately, even with Exchange only, I am seeing very strange and frustrating behavior as described above.
Help... please. I want this to work but the frustration I am feeling is growing worse by the hour.
Model: SQN100-2
OS Release: 10.1.0.2011
OS Version: 10.1.0.2038
Build ID: 525050
Ian

To follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian

The Java plugin has created a time unfriendly issue with my e-mail account, I can not open or send any e-mail without using this plugin, how can I eliminate this problem without dropping m. firefox?

A few days ago I tried to e-mail a friend, when I started A box came up and it required me to add a plugin..Java. I contacted my e-mail courier and microsoft, they told me that is was a plugin from Mozilla Firefox. Since then I must go through Java to send or open an e-mail... this is NOT to my satisfaction, it takes too long for all of this to open and if it is not cleared , I am dropping Mozilla and going elsewhere. Why has this occurred? Is this a result of the last update? If so can I delete the last update and continue on the other version?
== This happened ==
Every time Firefox opened
== last week

Sorry, I have no idea what you mean by '''"The Java plugin has created a time unfriendly issue with my e-mail account, I can not open or send any e-mail without using this plugin,"'''.
If you think your problem is caused by the Java plugin, you should visit the Java support forum for assistance.
http://forum.java.sun.com/index.jspa
If you could explain what you mean by '''"time unfriendly''' issue with my e-mail account", maybe we'll be able to help you solve that issue.
It might be helpful for us if we knew exactly which web-mail provider you are using. It seems strange to me that viewing or sending web-mail would actually "need" Java for operation, its more likely that some other item on the web page needs Java to run some advertising or other garbage that isn't a necessary part of the web-mail functionality you want to use.

Issue with Information broadcasting and pre-cal server in SAP BI

Hi Experts,
I have issue with information Broadcasting and Pre-cal server. I have a worrkbook whcih runs from information broadcasting in pre-cal server. Workbook is desinged on single query and workbook contains visual basic code. workbook has a variable which is controlled by Control query in information broadcasting.
I have 20 employees every month I need to send workbook via e-mail from information broadcasting. The problem is sometimes all 20 employees will recieve e-mails and sometimes not. I identified there is something wrong in workbook or in pre-cal server.
because after workbook calculation in pre-cal server is not pushing to SOST so there is something wrong in workbook or in pre-cal server.
I closely observed pre-cal server front end log. There are few operations performing on workbook in pre-cal server
like Open workbook, Calculate workbook, Save woorkbook and close workbook. In success case pre-cal sever is performing all the operations but in failure case pre-cal server is missing Close workbook case.
Below log In pulled from pre-cal server
Can you please tell what could be the problem.
Successful job
3/11/2011 9:29:46 AM (3) -> RS_PREC_LAUNCH_EXCEL i nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
2PCUG9ZPPP'. nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
3/11/2011 9:29:46 AM (3) -> InitConnection in thre ad 3
3/11/2011 9:29:46 AM (3) -> Trying to open "C:\Pro gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
xla" gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:30:35 AM (3) -> Using Version 7100.4.1 200.35 of BExAnalyzer.xla
3/11/2011 9:30:35 AM (3) -> PID of Excel process: "2504"
3/11/2011 9:30:35 AM (3) -> EndOfInitConnection in thread 3
3/11/2011 9:30:35 AM (3) -> RS_PREC_LAUNCH_EXCEL f inished
3/11/2011 9:30:36 AM (0) -> Calculation Request 91 1A35ED029D4D79DD7A000200000000 received for job 'B
IBCAST4L4EIS7TOR5BWG02PCUG9ZPPP'. 1A35ED029D4D79DD7A000200000000 received for job 'B
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:31:22 AM (0) -> Opening workbook: C:\W INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
DVLYAPC2SYIC7F1AAIO_0.xls INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
3/11/2011 9:31:43 AM (0) -> Refresh BExAnalyzer.xl a!MenuRefreshPrecalc returned with 1.
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls saved. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls closed. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:44 AM (0) -> Excel based operations finished.
Failure job
3/10/2011 10:22:58 AM (1) -> RS_PREC_LAUNCH_EXCEL invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
TGJR0462ZFX'. invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
3/10/2011 10:22:58 AM (1) -> InitConnection in thr ead 1
3/10/2011 10:22:58 AM (1) -> Trying to open "C:\Pr ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
.xla" ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:23:44 AM (1) -> Using Version 7100.4. 1200.35 of BExAnalyzer.xla
3/10/2011 10:23:44 AM (1) -> PID of Excel process: "2544"
3/10/2011 10:23:44 AM (1) -> EndOfInitConnection i n thread 1
3/10/2011 10:23:44 AM (1) -> RS_PREC_LAUNCH_EXCEL finished
3/10/2011 10:23:44 AM (5) -> Calculation Request 9 11A35ED02654D789871000900000000 received for job '
BIBCAST4L41566ZBZDN2NTGJR0462ZFX'. 11A35ED02654D789871000900000000 received for job '
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:24:31 AM (5) -> Opening workbook: C:\ WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
A8O8D8FBHYCR4HVB5UI8_0.xls WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
3/10/2011 10:24:52 AM (5) -> Refresh BExAnalyzer.x la!MenuRefreshPrecalc returned with 1.
3/10/2011 10:24:52 AM (5) -> Calculated workbook C :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
2VEA8O8D8FBHYCR4HVB5UI8_0.xls saved. :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
Thanks in advance
Narendra

Hi Ravikanth,
Thank you very much for the reply
I went into RSPRECADMIN and clicked on 'Display Current Queue'. There we have 3 sections
1) Queue Overview of Open Precalculations
I can see this section is always blank after running IB also
2) Queue Overview of Current Precalculations
In this section I can see an entry after running IB and duration is changing. but some time workbook in this section will never processed but the duration column is changing may be something is happening at this stage.
If the entry is not proccessed in this section and IB SM37 job will never end. I manually cancelled the job from SM50.
Don't why the workbook is taking long time and will never end even though I cancelled the SM37 IB job.
3) Queue Overview of Proccessed Error-Free Precalculations
All the error free workbooks which means all pre-cal server completed workbook calculation and sent to SOST.
I manually ran the workbook for all the 20 employees I can't find any pop-up message (earlier we have pop-up windows appearing because of VB code and when report returns no data and we fixed the pop-up issues)
Can you please help me further to trace the error.
Thank you
Narendra

Issues with Office 2010 and Acrobat Pro 8

Good Day All;
We are in the middle of upgrading from Windows XP to Windows 7 with Office 2010 and I was wondering if there are any issues with importing Office documents into Acrobat Pro 8. I have found out that there are a couple of issue with Office 201 and LifeCycle Designer.
Any comments would be helpful
Regards
Chomp

Acrobat 8 is not compatible with Microsoft Office 2010 and the PDFMaker plugins will not install. Only Acrobat X is compatible with Office 2010, and at this time only in 32-bit mode.
Acrobat 8 is also not officially compatible with Windows 7, again Acrobat X is the first version to carry approval for that OS. It will still install, but Adobe cannot guarantee it will operate perfectly in all cases, and doesn't provide install support for that combination.

Issue with setting ratings and labels

Greetings all. I am having an issue with setting ratings AND labels on image files at the same time. If the script sets the label first then the rating, the label doesn't show in Bridge. If the script sets the rating first then the label, the rating doesn't show in Bridge.
Is there a workaround for this? Here is my script function for doing this. file=filename minus extension. Rating is a number for the desired rating. lab is a number for the level of Label I wish to set. Everything works great except that I can't set both Rating and Label with the script as shown. In this instance, only the Ratings will show up in Bridge after running the script. If I move the x.label=Label line under the x.rating=Rating line, then the ratings only show for those images with no label (lab=0). Any image that gets a label receives no rating.
If you're going to test this, you may want to comment out the Collections part. That's the part within the "switch(Number(Rating))" block.
function setRating(file,Rating,lab) {
    try{
        cr=File(file+"CR2");
        psd=File(file+"psd");
        jpg=File(file+"jpg");
        tif=File(file+"tif");
        switch(lab) {
            case 0: Label = ""; break;
            case 1: Label = "Select"; break;
            case 2: Label = "Second"; break;
            case 3: Label = "Approved"; break;
        if (cr.created) {
            var c=new Thumbnail(cr);
            c.label=Label;
            c.rating=Rating;
            if (psd.created) {
                p=new Thumbnail(psd);
                p.label=Label;
                p.rating=Rating;
                if (jpg.created) {
                    var j=new Thumbnail(jpg);
                    j.label=Label;
                    j.rating=Rating;
                    Rating=0;
                else addFile=psd;
            else addFile=cr;
        switch(Number(Rating)){
            case 0 : break; /* No Rating */
            case 1 : if(!app.isCollectionMember(OneStar,new Thumbnail(addFile))) app.addCollectionMember(OneStar,new Thumbnail(addFile)); break;
            case 2 : if(!app.isCollectionMember(TwoStars,new Thumbnail(addFile))) app.addCollectionMember(TwoStars,new Thumbnail(addFile)); break;
            case 3 : if(!app.isCollectionMember(ThreeStars,new Thumbnail(addFile))) app.addCollectionMember(ThreeStars,new Thumbnail(addFile)); break;
            case 4 : if(!app.isCollectionMember(FourStars,new Thumbnail(addFile))) app.addCollectionMember(FourStars,new Thumbnail(addFile)); break;
            case 5 : if(!app.isCollectionMember(FiveStars,new Thumbnail(addFile))) app.addCollectionMember(FiveStars,new Thumbnail(addFile)); break;
            default : break;
    }catch(e){
          alert(e);
          return -1;

Afew errors to start with, you were not creating a proper file as there wasn't a fullstop in the filename.
If a CR2 file didn't exist no other file was looked for, you were using "created" and should have been "exists"
This now labels and rates....
setRating("/C/Test Area/NEF/z",2,1);
function setRating(file,Rating,lab) {
    try{
        cr=File(file+".CR2");
        psd=File(file+".psd");
        jpg=File(file+".jpg");
        tif=File(file+".tif");
        switch(Number(lab)) {
            case 0: Label = ""; break;
            case 1: Label = "Select"; break;
            case 2: Label = "Second"; break;
            case 3: Label = "Approved"; break;
        if (cr.exists) {
            var c=new Thumbnail(cr);
            c.label=Label;
            c.rating=Rating;
            if (psd.exists) {
                p=new Thumbnail(psd);
                p.label=Label;
                p.rating=Rating;
                if (jpg.exists) {
                    var j=new Thumbnail(jpg);
                    j.label=Label;
                    j.rating=Rating;
                    Rating=0;
        switch(Number(Rating)){
            case 0 : break;
            case 1 : if(!app.isCollectionMember(OneStar,new Thumbnail(addFile))) app.addCollectionMember(OneStar,new Thumbnail(addFile)); break;
            case 2 : if(!app.isCollectionMember(TwoStars,new Thumbnail(addFile))) app.addCollectionMember(TwoStars,new Thumbnail(addFile)); break;
            case 3 : if(!app.isCollectionMember(ThreeStars,new Thumbnail(addFile))) app.addCollectionMember(ThreeStars,new Thumbnail(addFile)); break;
            case 4 : if(!app.isCollectionMember(FourStars,new Thumbnail(addFile))) app.addCollectionMember(FourStars,new Thumbnail(addFile)); break;
            case 5 : if(!app.isCollectionMember(FiveStars,new Thumbnail(addFile))) app.addCollectionMember(FiveStars,new Thumbnail(addFile)); break;
            default : break;
    }catch(e){
          alert(e);
          return -1;

Issue with recursive join and filter records

I am having an issue with recursive join and filtering records for the following rules. The table, sample records, test script and rules are as below
drop table PC_COVKEY_PD;
create table PC_COVKEY_PD (
PC_COVKEY varchar(50),
COVERAGE_NUMBER varchar(3),
SEQUENCE_ALPHA varchar(3),
TRANSACTION_TYPE varchar(3),
COV_CHG_EFF_DATE date,
TIMESTAMP_ENTERED timestamp
delete from PC_COVKEY_PD;
commit;
Insert into PC_COVKEY_PD values ('10020335P8017MT0010012','001','001','02',to_date('01/FEB/2010','DD/MON/RRRR'),to_timestamp('02/JAN/2010 01:55:59.990216 AM','DD/MON/RRRR HH12:MI:SS.FF6 AM'));
Insert into PC_COVKEY_PD values ('10020335P8017MT0050012','005','001','02',to_date('01/FEB/2010','DD/MON/RRRR'),to_timestamp('02/JAN/2010 01:56:00.268099 AM','DD/MON/RRRR HH12:MI:SS.FF6 AM'));
Insert into PC_COVKEY_PD values ('10020335P8017MT0010032','001','003','03',to_date('14/JAN/2011','DD/MON/RRRR'),to_timestamp('14/JAN/2011 04:25:19.018217 PM','DD/MON/RRRR HH12:MI:SS.FF6 AM'));
Insert into PC_COVKEY_PD values ('10020335P8017MT0010042','001','004','03',to_date('21/JAN/2011','DD/MON/RRRR'),to_timestamp('21/JAN/2011 04:00:31.719444 PM','DD/MON/RRRR HH12:MI:SS.FF6 AM'));
Insert into PC_COVKEY_PD values ('10020335P8017MT0050022','005','002','03',to_date('21/JAN/2011','DD/MON/RRRR'),to_timestamp('21/JAN/2011 04:02:48.953594 PM','DD/MON/RRRR HH12:MI:SS.FF6 AM'));
commit;
--select * from PC_COVKEY_PD order by COV_CHG_EFF_DATE,TIMESTAMP_ENTERED;
PC_COVKEY          COVERAGE_NUMBER     SEQUENCE_ALPHA     TRANSACTION_TYPE     COV_CHG_EFF_DATE     TIMESTAMP_ENTERED
10020335P8017MT0010012          001     001                  02                          01/FEB/2010            02/JAN/2010 01:55:59.990216 AM
10020335P8017MT0050012          005     001                  02                      01/FEB/2010            02/JAN/2010 01:56:00.268099 AM
10020335P8017MT0010032          001     003                  03                      14/JAN/2011            14/JAN/2011 04:25:19.018217 PM
10020335P8017MT0010042          001     004                  03                      21/JAN/2011            21/JAN/2011 04:00:31.719444 PM
10020335P8017MT0050022          005     002                  03                      21/JAN/2011             21/JAN/2011 04:02:48.953594 PM
*/Rule;
Every PC_COVKEY, query should recursively join and generate set of records depending on latest SEQUENCE_ALPHA for the coverage number at that point of time. For ex,
for 10020335P8017MT0010042 (4 row) should generate 2 records
1. 10020335P8017MT0010042001004 (PC_COVKEY || COVERAGE_NUMBER || latest SEQUENCE_ALPHA--004 for cover 001), SEQUENCE_ALPHA 001 for cover 001 is not the latest for 10020335P8017MT0010042.
2. 10020335P8017MT0010042005001 (coverage number 005, and latest sequence alpha-001 for cover 005).
SEQUENCE_ALPHA 002 for cover 005 is not the latest for 10020335P8017MT0010042 as it happened later stage.
for 10020335P8017MT0050022 (5 row) should generate 2 records as
1. 10020335P8017MT0050022001004 (PC_COVKEY || COVERAGE_NUMBER || latest SEQUENCE_ALPHA--004 for cover 001),
2. 10020335P8017MT0010042005002 (coverage number 005, and latest sequence alpha-002 for cover 005)
WITH SNAPSHOT_CVR_CTP as (
SELECT pcd1.PC_COVKEY,
       pcd1.PC_COVKEY||pcd2.COVERAGE_NUMBER||pcd2.SEQUENCE_ALPHA as cov_key,
       pcd2.COVERAGE_NUMBER,
       pcd2.SEQUENCE_ALPHA,
       pcd2.COVERAGE_NUMBER||pcd2.SEQUENCE_ALPHA as CVRSEQ,
       max(pcd2.COVERAGE_NUMBER||pcd2.SEQUENCE_ALPHA) over (partition by pcd1.PC_COVKEY, pcd1.COVERAGE_NUMBER
       order by pcd2.COV_CHG_EFF_DATE, pcd2.TIMESTAMP_ENTERED) as MaxSeq,
       pcd2.COV_CHG_EFF_DATE,
       pcd2.TIMESTAMP_ENTERED
FROM
PC_COVKEY_PD pcd1,
PC_COVKEY_PD pcd2
select * from SNAPSHOT_CVR_CTP SC
WHERE sc.PC_COVKEY = '10020335P8017MT0010042' -- 4 row
--AND COVERAGE_NUMBER||SC.MAXSEQ = COVERAGE_NUMBER||SEQUENCE_ALPHA
ORDER BY TIMESTAMP_ENTERED
PC_COVKEY     COV_KEY     COVERAGE_NUMBER     SEQUENCE_ALPHA     CVRSEQ          MAXSEQ     COV_CHG_EFF_DATE     TIMESTAMP_ENTERED
10020335P8017MT0010042     10020335P8017MT0010042001001     001     001     001001     001001     01/FEB/2010     02/JAN/2010 01:55:59.990216 AM
10020335P8017MT0010042     10020335P8017MT0010042005001     005     001     005001     005001     01/FEB/2010     02/JAN/2010 01:56:00.268099 AM
10020335P8017MT0010042     10020335P8017MT0010042001003     001     003     001003     005001     14/JAN/2011     14/JAN/2011 04:25:19.018217 PM
10020335P8017MT0010042     10020335P8017MT0010042001004     001     004     001004     005001     21/JAN/2011     21/JAN/2011 04:00:31.719444 PM
10020335P8017MT0010042     10020335P8017MT0010042005002     005     002     005002     005002     21/JAN/2011     21/JAN/2011 04:02:48.953594 PM
I am trying to filter row using MAXSEQ but at the moment MAXSEQ values are not coming as expected. I expect following value for COV_KEY combination
COV_KEY                                         MAXSEQ
10020335P8017MT0010042001001     001004
10020335P8017MT0010042005001     005001 -- match
10020335P8017MT0010042001003     001004
10020335P8017MT0010042001004     001004 -- match
10020335P8017MT0010042005002     005001Would appreciate if anyone can get MAxSEQ as expected.

Something like..
with dist_cov_numbers as
select distinct coverage_number cov_number
from PC_COVKEY_PD
all_data as
select pcd.*,d.cov_number new_coverage_number,
         max(decode(coverage_number,d.cov_number,sequence_alpha))
              over( partition by d.cov_number
                    order by COV_CHG_EFF_DATE,TIMESTAMP_ENTERED
                              ) max_seq
from PC_COVKEY_PD pcd,dist_cov_numbers d
select pc_covkey,pc_covkey||new_coverage_number||max_seq new_key,
       pc_covkey||coverage_number||sequence_alpha actual_key
from all_data
order by COV_CHG_EFF_DATE, TIMESTAMP_ENTERED;
PC_COVKEY                   NEW_KEY                           ACTUAL_KEY
10020335P8017MT0010012      10020335P8017MT0010012001001      10020335P8017MT0010012001001
10020335P8017MT0010012      10020335P8017MT0010012005         10020335P8017MT0010012001001
10020335P8017MT0050012      10020335P8017MT0050012001001      10020335P8017MT0050012005001
10020335P8017MT0050012      10020335P8017MT0050012005001      10020335P8017MT0050012005001
10020335P8017MT0010032      10020335P8017MT0010032001003      10020335P8017MT0010032001003
10020335P8017MT0010032      10020335P8017MT0010032005001      10020335P8017MT0010032001003
10020335P8017MT0010042      10020335P8017MT0010042005001      10020335P8017MT0010042001004
10020335P8017MT0010042      10020335P8017MT0010042001004      10020335P8017MT0010042001004
10020335P8017MT0050022      10020335P8017MT0050022005002      10020335P8017MT0050022005002
10020335P8017MT0050022      10020335P8017MT0050022001004      10020335P8017MT0050022005002
10 rows selected Edited by: jeneesh on Nov 22, 2012 10:54 AM

Time Zone issue with 7.0 and DB2

Similar Messages

Maybe you are looking for