Timelime VS multiple pages

I'm setting up a corporate site using all Flash. I have one
page with a section I use to display frames or or small slide
shows.
I am confused as to the best practice of calling the content
in the page.
Would I use one large time-line in my FLA file and call each
specific frame
or
use multiple FLA files which display inside the content area
of my page?
I am concerned about load times and also being able to expand
upon the site after I have it running.
Thanks for any info about this.

I would a say use the main timeline to set up your site with
root content for example global content, home content anything that
is seen on every module or page for lack of a better word. Then use
loadMovie to bring in external content for the other mods like
about us, stuff and more stuff.
This method will reduce the load time per function. Use
preloaders to load external content as well as the root content.
Shane

Similar Messages

  • I am trying to scan multiple pages from my scanner using a Mac and don't know how to

    Hi there,
    I am trying to scan multiple pages using HP Deskjet 3070A (Print Scan Copy) and it is all wireless using a Mac OSX 10.6 Snow Leopard and it won't let me. And I am trying to send this document via email.
    Can you offer advice as to how I can do this.
    Much appreciated.
    This question was solved.
    View Solution.

    Hi,
    Please refer manual for the printer and page 26 from link below.
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • In Pages '09, OSX 10.8 how do I print multiple pages on one sheet of paper.  (I used to be able to do this in earlier versions via the "page setup" menu.

    Forget it.  The answer is that the multiple page per page setup comes up in the printing menu.  (When you do command-P)

    Click on the Show Details button in the Print dialog.
    Whenever options seem to disappear, have a look around and explore what is available. Particular when they have what appears to be relevent labels.
    Peter

  • New preview function for iPad–error message "Multiple page sizes not supported"

    When I try to use the new preview function with my iPad I get the error message "Multiple page sizes within a layout are not supported". I have a page that is 768 x  1296. I would really like to preview this folio before publishing. Any suggestions?

    If you're trying to create an article that scrolls vertically, you can create a 768x1296 article in a 1024x768 folio, but you need to select a Smooth Scrolling option when you create or import the article, or in the Article Properties dialog box.

  • How do I scan multiple pages into one pdf document on a HP Envy 4501 Printer

    My HP Envy 4501 Printer won't let me scan multiple pages into one pdf document.
    I went to "Advanced Settings", clicked on "file" and made sure that the check box next to "Create a separate file for each scanner page" was unchecked.
    When I clicked the Save button it showed the page that I scanned and showed 1/1.  On the right side it had options for changing the brightness and Contrast, Rotate and Crop and "Back", "Save" and "Done" buttons, but nothing about scanning another page.
    Not to mention HP's Customer Support is useless!
    I'd appreciate any help I can get with this problem.
    Thanks,
    Mark

    Hi BH,
    I see your diagram.  I just scanned something.  The screen that I'm looking at right now shows the preview page and the scroll box to the left of that just like in your diagram.  The screen does not show the + button nor does it show the red x button under the scroll box as in your diagram.  I can't see the plus sign because it is not there.
    I tried re-installing the software and drivers as you suggested but that did not have any affect.
    Thank you for trying to help me with this problem but it hasn't worked, therefore I can't mark the reply "Accept as Solution".
    I've noticed that on HP's support forum web page there is only 1 solved request for assistance.  That doesn't give me much confidence in HP.
    Please reply back to this post to let me know if there is anything else that I can try or if you know someone else at HP that can help.
    If I don't here back from you, I'm returning this HP Envy 4501 Printer to get my money back to use it to buy a printer from one of HP's competitors.
    Thanks,
    Mark  

  • Print to pdf often doesn't work with multiple pages?

    When I try to print to pdf, it often doesn't work right.
    I can select, for example, multiple Excel worksheets to print. It looks fine with 4 pages in Preview, but when I select save as .pdf, it only prints 2 of the 4 pages, and it prints those in 2 separate documents rather than a single .pdf document with multiple pages.
    Is there a way to do this? Is this an Apple error or Microsoft error? Since it looks fine in Preview, my guess it is an Apple error?
    Mark

    It sounds like this is the problem with the way Apple handles multiple orientations in a pdf document. You can use Acrobat to print the files - it handles multiple orientations correctly. There was a previous thread on this:
    http://discussions.apple.com/message.jspa?messageID=1983431#1983431

  • Scanning multiple pages into one document with an automatic document feeder

    when using automatic document feeder to scan in multiple pages - using the Image Capture app, this process does not work for more than 2 pages. However works perfectly in PC environment.
    Using a MacBook Pro with 10.8.4 and a Lexmark Interpret 405S All In One Scanner.
    Is there any other all in one device that can perform this function in a Mac environment?
    Please advise.

    Hi @FentyFly ,
    I see by your post that you would like to know how to scan multiple pages into one file. I would like to help you out today.
    From the HP Scan Software, click on the link for Advanced Settings, then uncheck Create a separate file for each scanned page.
    Here is a URL for how to scan and change the settings. Just select your operating system.
    Scan.
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    If you need further assistance, just let me know.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Scanning multiple pages

    When i try to scan multiple pages using Acrobat 8.1 Professional, my scanner actually scans the pages I feed it, but only the first page is converted into a .pdf. The other pages do not show up. This happens whether I am creating a new .pdf or amending an existing .pdf.
    Does anyone know how to fix this?
    Thanks,
    Eli

    Ask in the forum. This is not a new feature. I don't know either.

  • Scanning Multiple Pages HP 8500A

    Hi,
    I want to scan multiple pages into one pdf document.  When I hit scan on the printer, it will scan and then send to my computer.  It won't give me the option to add another page to the pdf.  
    I need to know how to rectify this as I have many pages for one pdf! 
    Thank you,
    I don't use an app on my computer.  I have to manually scan the doucments.

    Hi there again,
    You should be able to load your multiple page document in the top ADF and select scan to computer. The multiple pages should scan to your computer and save as one file if you have selected the option in the printer software on your computer to scan multiple pages to one file.
    The scanning command on the printer works together with the printer software on your computer. Also, you need to have the Full Feature Driver installed on your PC.
    I hope that helps.
    Regards,
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Scanning multiple pages into PDF

    I am trying to scan multiple pages into one PDF. I read the help document - which states that to add pages, one clicks on the "+" button on the left. However, my software does not show the "+" button. I have the latest version of the software. What's up with that?
    This question was solved.
    View Solution.

    Hi,
    Sounds like the software is not fully installed. My suggestion: re-install Full Feature Software and Drivers for your printer.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Scanning multiple pages in one document

     I am trying to scan multiple pages in one document.  I am using a HP Envy 4501 All-in-one and running Windows 8.1.  I used to be able to do this at one point but for some reason, lately I am not able to.  I have read other posts that spoke of a "+" sign on the left side of the screen, but it is not there for me.  Also, I cannot just save the page and scan the next without having to save them under different file names.  Please advise.
    This question was solved.
    View Solution.

    Hi,
    From the HP Software click on Scan a Document or Photo and ensure the Sow Scan Preview is checked.
    Reduce the Scan Resolution into 300 or a lower resolution and press on Scan, then the add button should appear again.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Scanning multiple pages in one file - Deskjet 1510

    How to scan multiple pages and put them all in one pdf file?
    Currently, system is letting me scan one page and makes it one separate file, whereas I need to put them all in one single PDF file. Please assist.
    This question was solved.
    View Solution.

    Hi,
    Please try
    Double click printer icon on desktop,
    Select Scan a Document or Photo,
    Put the first page on the glass (face down),
    Check options (size, dpi ...), and select Scan document to file,
    Click Scan - machine will scan the first page
    Remove the first page on the glass, put the second page,
    Click + (plus sign) It sits on the left hand side of a red x
    Machine will scan the second page, put 3rd page on the glass and click + again ..... to the end then click Save
    Click Done after Save
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Scanning multiple pages with preview and brother MFC-7440n

    Hi,
    because of some problems with my old scanner after i installed snow leopard, i bought a new compatible one. It's a brother MFC-7440n with apple build-in drivers.
    When i start scanning to preview with more than one page, there will be a pdf document for every page. It doesn't matter if i choose "create just one document".
    First i wondered because in leopard preview multiple pages are displayed like in snow leopard. But this is wrong. There is one pdf file for every page.
    How can i change that issue? When i scan more than one page, i wan't one pdf document with multiple pages, not a pdf per page.
    Thanks a lot.
    Dominik

    Hi Dominik,
    What about Brother's scanner software? Do they have a scan program you can use to create multiple page documents? I have a Canon, and its software did that. The only other way is how I explained in my previous post. I have no issue using Preview for the simple document scanning I do. But if you have more needs, perhaps the Brother scan program should be installed.
    Brother has issued a scanner driver update on 9/10....
    http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/downloadindex.html?reg=us&c=us&lang=en&prod=mfc7440nall&type2=1&os=all&flang=all&dlid=dlf003973
    Also several other updates:
    http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/downloadtop.html?reg=us&c=us&lang=en&prod=mfc7440nall

  • Scanning Multiple Pages using HP ENVY 4500

    Hi, I have a macbook pro running OSX 10.9.4, and cannot see how I can scan multiple pages.  I have tried using Image Capture and the Scan function under system preferences.  I place the first page on the glass and change format to pdf and check the box that says 'combine into single document'. It usually 'automatically' scans the page at this point, and if I click Overview Scan, it scans again.  If I try to click on "Scan' it says it is done scanning the selected area.  I have no idea what to do after this, or where to find the document (its not showing up in the selected 'Scan To' location.
    Many thanks.

    Hi therelkd123, welcome to the forums
    I understand you are looking to scan a multiple page document with your HP Envy 4500. See the link below for the instructions! Click the link, select "Scan with HP Software" and "How to scan a multi-page original into a single file".
    How to Scan: OS X v10.9
    Have a great weekend
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Scanning multiple pages into one file using MAC

    How do I scan multiple pages and save them into one file or document using a MacBook Pro laptop?  My printer is an HP Photosmart 7520.  When I use this printer and scan from my PC, it does allow me to scan multiple copies and save as one document by just adding pages as I scan.  When I scan with my MacBook Pro, it scans each page, however, I don't get any option or choice to save as one document.  It automatically saves each page as a separate document.

    Try scanning from your Mac. Use Image Capture app in your Applications folder.
    Click once on the scanner on the left side, then click on Show Details along the bottom. Along the right side you will see LOTS of options for scanning and saving.
    One of those is Format, make the Format PDF.  Just below that will be a check box allowing you to scan multiple pages to one file.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

Maybe you are looking for

  • I live in 2 countries - how do I use iTunes in both?

    I bought my iPod Touch in the USA about 2 weeks ago. I set up iTunes in Ireland. I live in Spain and in Ireland, though spend most of my time in Spain. I was informed this would not be a problem by the people in the Apple Store, but when upgrading th

  • Microsoft Excel has encountered a problem and needs to close

    I've been using Microsoft Office 2008 for a long time and just this week I'm getting the below message: "Microsoft Excel has encountered a problem and needs to close. Sorry for the inconvenience." I can't open it at all. Word works fine. I've deleted

  • Center text inside shape in titler?

    Is there any way to center text inside a shape within the titler?   For example let's say I use the Rounded Rectangle Tool to create a shape and put it in the lower third of title area, then use the Text Tool to type in a line of text.  For now I'm h

  • Getting my F4580 to connect to my network thats not broadcasti​ng it's SSID

    I'm an Apple Mac user, I'm trying to connect my Deskjet F4580 to connect to my network wirelessly. I am using a Belkin Pre N1 Wireless Router, which is set not to broadcast it's SSID. I've tried entering the SSID manually on the setup for the F4580,

  • Video projector (Toshiba TDP MT500)- no signal

    Hello- I have a problem with my external display (it's a toshiba MT500 video projector). It works fine with my iBook G4, using a DVI-VGA adapter, so I assumed it would be the same with my new MacBook, but alas no... I called Toshiba, who were incredi