Timeline Start and Finish Dates - how to not display finish dates for tasks not added to timeline

I have a project, Project 1, with start date 1 Jan 2014 and finish date 31 Dec 2014. When I switch to timeline view, the timeline spans this period. I now want to create a second view for a sub project within Project 1, called Project 1A. It
starts 1 June 2014 and finishes 31 August. I only want to see Project 1A's tasks and time span on this second custom timeline view. I create the new view, add the tasks from Project 1A to the timeline, and save the view as CustomView1A. My problem: CustomView1A
shows the tasks for Project 1A, but also shows the dead space between 1 Jan 2014 and 1 June 2014, as well as the dead space between 31 August and 31 December.
I dont want to see the dead space. I want CustomView 1A's timeline to start and finish on Project 1A's start and finish dates.
How do I adjust CustomView 1A's timeline borders on the left and right to exclude the dead space?
Hanneliese Fourie

Dear Sir,
I checked in CO41 and it allows me to convert planned order to production order and not have any provision to re-scheduling the planned order . Any function to reschedule planned order to future dates ( whose start dates and finish dates are in past ) ?
Thanks,
SL

Similar Messages

Moving LR5 catalog (Irdata & Ircat) to a new hard drive and photos. Lost all meta data - How do I move meta data along with catalog?

I moved LR5 catalog (Irdata & Ircat) to a new hard drive and photos. Lost all meta data - How do I move meta data along with catalog?
The meta data for each image is missing.
I have over 2,000 images. I don't want to go back through each image and add meta data.
Is there some way to move everything?

No, do not re-import your images. I assume you can see the thumbnails in the library module, just cannot access the full images, right? If this is the case there should be an exclamation mark in the top right corner of every one of your pictures and you only have to tell LR where the images are now.
Click the exclamation mark of one of the images and a dialog window should pop-up, telling you that LR cannot find the file, but with an option to locate it. Press "Locate" and navigate to the folder on your new HD where the file is. If in the new external HD you kept the same folder structure that you had on the internal disk, LR will be able to find all your images and re-link them to the database without further intervention.

The visual Studio Test controller service on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs

We are using VS2013 Premium. i have installed vs2013 Test controller in my dev environment. While i am configuring (https://msdn.microsoft.com/en-us/library/hh546459.aspx) getting error message in
the Configuration summary dialog box displaying following error's : 1. Failed to Configure TFS Team Project Collection, 2. Could not complete operation as the time out expired. ''
I have checked the "visual Studio Test controller " in the
Services --> Administrative. Its automatically stopped the service. When i started the manually its showing message like as 'The visual Studio Test controller
service on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs'
Please guide me how to resolve this problem.
Thanks in Advance...

Hi Divakar,
What’s the version of your TFS?
How do you configure the test control?
Please make sure you are specify the team collection instead of team project.
On the other hand, you may enable test controller logs. (You could share the log file on the OneDrive)
# How to enable test controller logs
http://blogs.msdn.com/b/aseemb/archive/2009/11/28/how-to-enable-test-controller-logs.aspx
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Product Revenue Bookings and Backlog Dashboard does not display any data

Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
They are able to see just the parameters.
Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
What can I check?
Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
Screenshot is at:
https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
Any ideas?

hi
We have faced the similar problem after the upgrade to 10G
What we did was
Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
we were able to get the data once the clear and load is completed successfully
Regards
Ramesh Kumar S

S_ALR_87013611 is not displaying any data for GL

Hi,
THe report S_ALR_87013611 is not displaying any data for GL. How to go about this
Regards
SM

Hi,
S_alr_87013611 is a report where we can see the planned and actual costs in cost elements in cost center wise for a specific controlling are for a given period.
Please check if your GL accounts are assigned with the cost elements in FS00.
If not create them.
You can assing all cost elements to many GL at a time using
OKb2_ Give the range and the cost element for each range eg, expenses range - cost element 1, incomeange _Cost element as 11 etc.
OKb3 _Create the batch input session
SM30_ Run the batch input session created
Also please check if you have given the cost center group costt senter range while you entered the ranges in the selection screen in this report.
Similarly please check the cost elements and cost elements group also.
Thanks,
Shilpa.

View the .rtf file not display the data in BI Publisher Enterprise.

Hi,
Platform: OBIEE 10g in NT XPsp2
View the .rtf file not display the data in BI Publisher Enterprise.
Step 1, I created Answer-request, create .rtf file with Word and add the request name, Add bar chart and table, preview PDF is working fine with data, Upload this template to Answers, View Template from Answer is working fine with data.
Step 2, Answers – More Products > BI Publisher > My Folders > Create a new report > Edit > Data Model > New > Type: SQL Query > Data Source: Oracle BI EE > Query Builder > from SupplierSales assign Customer, Periods, Sales Facts (select Region, state, Year, Units Shipped) > Results > Save > Save
Click Layouts > New > enter Name ….. > Click Layouts > borrows .rtf file in Manage T file > Upload > Save > Click View
It is showing only the .rtf file without data. Why there is no data?
Please guide me to solve this issue.
Thanks,
Jo

Thanks for you reply,
Our scenario is this report is basically a dissconnected mode report... we are developing these reports for mobile clients.
We dint face this kind of issue while developing other reports.
So please let us know if you have any idea on why we are facing this issue.
Regards,
Maneesh

Strange scenario,Oracle can not display the data in mysql correctly

I use Heterogeneous Service+ODBC to achieve "oracle access mysql"(any other method?),and now i find Oracle can not display the data in mysql correctly:
-------mysql------------
mysql> create table tst(id int,name varchar(10));
Query OK, 0 rows affected (0.00 sec)
mysql> insert into tst values(1,'a');
Query OK, 1 row affected (0.00 sec)
mysql> select * from tst;
------------+
| id | name |
------------+
| 1 | a |
------------+
1 row in set (0.00 sec)
mysql> show create table tst\G
*************************** 1. row ***************************
Table: tst
Create Table: CREATE TABLE `tst` (
`id` int(11) DEFAULT NULL,
`name` varchar(10) DEFAULT NULL
) ENGINE=MyISAM DEFAULT CHARSET=utf8
1 row in set (0.00 sec)
-------------oracle ------------------
SQL> select count(*) from "tst"@mysql;
COUNT(*)
49
SQL> select * from "tst"@mysql;
id
1
SQL> desc "tst"@mysql;
Name Null? Type
id NUMBER(10)

You can make the following query on the result page:
"select * from the_table where movietitle = ? and cinema = ?"
then you set movietitle and cinema to those which the user selected. If the resultset contains more than 0 rows, that means the movie is available.
Below is the sample code, it assumes you have a connection to the database:
PreparedStatement stat = myConnection.prepareStatement("select * from the_table where movietitle = ? and cinema = ?");
stat.setString(1, usersMovieTitleSelection);
stat.setString(2, usersCinemaSelection);
ResultSet res = stat.executeQuery();
if (res.next()) {
out.print("The movie is available");
} else {
out.print("The movie is not available");
}Now just add that to your JSP page. Enjoy ! =)

DataGrid does not display XML data

Hello, and thanks for reading this...
I am having a problem displaying XMLList data in a DataGrid.
The data is coming from a Tree control, which is receiving it
from a database using HTTPService.
The data is a list of "Job Orders" from a MySQL database,
being formatted as XML by a PHP page.
If it would be helpful to see the actual XML, a sample is
here:
http://www.anaheimwib.com/_login/get_all_orders_test2.php
All is going well until I get to the DataGrid, which doesn't
display the data, although I know it is there as I can see it in
debug mode. I've checked the dataField property of the appropriate
DataGrid column, and it appears correct.
Following is a summary of the relevant code.
...An HTTPService named "get_all_job_orders" retrieves
records from a MySQL database via PHP...
...Results are formatted as E4X:
HTTPService resultFormat="e4x"
...An XMLListCollection's source property is set to the
returned E4X XML results:
...The "order" node is what is being used as the top-level of
the XML data.
<mx:XMLListCollection id="jobOrdersReviewXMLList"
source="{get_all_job_orders.lastResult.order}"/>
...The "jobOrdersReviewXMLList" collection is assigned to be
the dataProvider property of a Tree list, using the @name syntax to
display the nodes correctly, and a change event function is defined
to add the records to a DataGrid on a separate Component for
viewing the XML records:
<mx:Tree dataProvider="{jobOrdersReviewXMLList}"
labelField="@name"
change="jobPosForm.addTreePositionsToDG(event)"/>
...Here is the relevant "jobPosForm" code (the Job Positions
Form, a separate Component based on a Form) :
...A variable is declared:
[Bindable]
public var positionsArray:XMLList;
...The variable is initialized on CreationComplete event of
the Form:
positionsArray = new XMLList;
...The Tree's change event function is defined within the
"jobPosForm" Component.
...Clicking on a Tree node fires the Change event.
...This passes an event object to the function.
...This event object contains the XML from the selected Tree
node.
...The Tree node's XML data is passed into the positionsArray
XMLList.
...This array is the dataProvider for the DataGrid, as you
will see in the following block.
public function addTreePositionsToDG(event:Event):void{
this.positionsArray = selectedNode.positions.position;
...A datagrid has its dataProvider is bound to
positionsArray.
...(I will only show one column defined here for brevity.)
...This column has its dataField property set to "POS_TITLE",
a field in the returned XML record:
<mx:DataGrid width="100%" variableRowHeight="true"
height="75%" id="dgPositions"
dataProvider="{positionsArray}" editable="false">
<mx:columns>
<mx:DataGridColumn width="25" headerText="Position Title"
dataField="POS_TITLE"/>
</mx:columns>
</mx:DataGrid>
In debug mode, I can examine the datagrid's dataProvider
property, and see that the correct XML data from the Tree control
is present. However, The datagrid does not display the data in any
of its 6 columns.
Does anyone have any advice?
Thanks for your time.

Hello again,
I came up with a method of populating the DataGrid from the
selected Item of a Tree Control which displays complex XML data and
XML attributes. After the user clicks on a Tree branch, I call this
function:
public function addTreePositionsToDG(event:Event):void{
//Retrieve all "position" nodes from tree.
//Loop thru each Position.
//Add Position data to the positionsArray Array Collection.
//The DataGrid dataprovider is bound to this array, and will
be updated.
positionsArray = new ArrayCollection();
var selectedNode:Object=event.target.selectedItem;//Contains
entire branch.
for each (var position:XML in
selectedNode.positions.position){
var posArray:Array = new Array();
posArray.PK_POSITIONID = position.@PK_POSITIONID;
posArray.FK_ORDERID = position.@FK_ORDERID;
posArray.POS_TITLE = position.@POS_TITLE;
posArray.NUM_YOUTH = position.@NUM_YOUTH;
posArray.AGE_1617 = position.@AGE_1617;
posArray.AGE_1821 = position.@AGE_1821;
posArray.HOURS_WK = position.@HOURS_WK;
posArray.WAGE_RANGE_FROM = position.@WAGE_RANGE_FROM;
posArray.WAGE_RANGE_TO = position.@WAGE_RANGE_TO;
posArray.JOB_DESCR = position.@JOB_DESCR;
posArray.DES_SKILLS = position.@DES_SKILLS;
positionsArray.addItem(posArray);
So, I just had to manually go through the selected Tree node,
copy each XML attribute into a simple Array, then ADD this Array to
an ArrayCollection being used as the DataProvider for the DataGrid.
It's not elegant, but it works and I don't have to use a Label
Function, which was getting way too complicated. I still think that
Flex should have an easier way of doing this. There probably is an
easier way, but the Flex documentation doesn't provide an easy path
to it.
I want to thank you, Tracy, for the all the help. I checked
out the examples you have at www.cflex.net and they are very
helpful. I bookmarked the site and will be using it as a resource
from now on.

How can I display the data in table in separate column?

I have a vi reading data one by one in the same column.
How can I display the data with separate column?
like this:
data 1 | read | read
data 2 | read | read
data 3 | read | read
(would you mind if I will ask for an example
because it is much easier for me to work
with an example)
THANK YOU.

If you're reading your data in as a 1D array, this is as simple as using the Reshape Array to make a 2D array. I've attached an example in LabVIEW 6.1 format. The example rearranges a single column of data fill several columns horizontally, but you can easily modify this code to fill the columns downward instead.
Attachments:
Data_Column_Example.vi ‏18 KB

How do i find the tablet for taking notes in school

how do i find the tablet for taking notes in school on macbookpro

Tablet? Do you mean like a notepad or notebook?
TextEdit is included as a part of Mac OS X. There are plenty of other word processor programs available- Microsoft Word, Apple's Pages, OpenOffice, to name a few

Query not displaying correct data

hi all
my query is not displaying correct data.
in data target secondary sales is showing 1.800 value but in query it is showing
2.00.my requirement is my query shuld show 1.800 value. i also tried to change decimal points but not changes has happend.plz let me knw what is the problem
thanks in advance
shalini gupta

With which u r reconciling the data.
With R3 or Cube.
I think check ur key figure, have u taken the key figure 'with TAX' one or with out tax one??
Regards,
Manoj.

My Mac Pro is not displaying any images for videos or games, it is showing sound and working but nothing else. DVD player is also coming up with an error.

My Mac Pro is not displaying any images for videos or games, it is showing sound and working but nothing else. DVD player is also coming up with an error. I'm not sure why neither is working, it just suddenly happened. I have done nothing different.

Lao Bo,
yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
find / -iname filename -print
This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
find /Users/username -iname filename -print
Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
cp -p filename_returned_by_find /Volumes/USB_volume
If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
ls /Volumes
Please let me know if you have any trouble with these commands.

How can I display the range for LastFullMonth in the header of a report

How can I display the month for LastFullMonth in the header of a report run in the past so that a report that ran sept 1 2009 selecting data for LastFullMonth (august 2009) displays sept 2009 in the header even if there is no data selected by the report?

Good,
Sometimes I answer these questions and completly miss it....
( lack of understanding on my part )

MIGO not displaying GOITEM-SGTXT for new posting

Hi All,
MIGO not displaying GOITEM-SGTXT for new posting
last year postings SGTXT is visible,
while checking in customer exits there is no no code.
I want to make it visible GOITEM-SGTXT.
Plz help.
Thanks
Saket

Hi guru's,
I have similar issue with MIGO Material Doc display,
The screen field GOITEM-SGTXT on the 'Where' tab is not displaying for current year ,
Previous years the Text field is displaying with the data.
GOITEM-SGTXT is getting the data from ML18N , ESSR-TXZ01 as the text is not entering through MIGO.
I checked the customer exit and the BADI's for the MIGO , but not activated for manipulating the
GOITEM-SGTXT.
Please give me an idea what makes this issue.
System Details:
ECC 5.0
SAP_APPL - 5.0 Logistics.
SAP_ABA - 6.40 Cross-Application Component
Thank you

How do you display total time for playlist in Itunes 11

how do you display total time for playlist in Itunes 11

"I can see the total time in my playlist on the computer but not on my device??"
I have just posted a question asking the same!
Did you have any joy?

Timeline Start and Finish Dates - how to not display finish dates for tasks not added to timeline

Similar Messages

Maybe you are looking for