Timeline View for Project 2007

Hi,
I just want to ask if there is a timeline view in Project 2007? I've seen that there for Project 2010... but I'm stuck with 2007 here...
I was wondering if there isn't any, is there a way to display a High Level view with only few details so that it wouldn't look too cluttered when presenting.
Thank you!

Hi,
The timeline view introduced in Project 2010. So it's not available in 2007.
If you are looking for high level view with only few details then applying filter to show summary tasks will help you.
There is also a report by name "Top Level" tasks which displays Summary Tasks details. You can change the content (using tables and task filters), time period (or unit), and details (including notes and objects), and you can sort the data in this report.
You can access it from Report menu >> Overview reports.
Thank you,
Kiran K.

Similar Messages

Tumbnails missing in Grid view for project

I've searched prior discussions but did not see the same issue listed.
Referenced files on internal drive, Aperture v2.1, OS X 10.5.2 and PowerMac Quad.
I'd been sorting out iPhoto and Aperture dups. and consolidating everything into Aperture. I noticed that one project had 214 images, yet only displayed around 5. No scroll bars etc. I rebuilt the library and tried a reset permissions but the project remained in error. Since I had the masters and that project had few if any edits, I merely secured my masters, deleted the project and reimported the masters.
Has anyone seen a similar issue and if so, found a fix/workaround for when there are ost of edits?

Sorry guys, i meant since iTunes 10 and not 9! Grid view worked fine on 9.

No reservations relevant to MRP exist for project

Hi all,
While doing MRP for WBS through MD51 i have got an error " No reservations relevant to MRP exist for project " . I am not getting where the problem is occurs.
Regards,
Swapnil Vaidya

Dear .
1.Please check wether in your project builder(CJ20N) Project Status is REL and Procurement Type is :Reservation for WBS element . then it will not create this masg.
2.Check whether MRP run date is after the project start date as well as the WBS element is also with in the time frame
3.Check the material master parameters(MRP1-MRP4 view ) for Project material which are to be planned by that Project WBS .
Check and revert
Regards
JH
Edited by: Jiaul Haque on May 1, 2010 2:27 PM

MS Project 2007 - Help with custom field calculation for grouped by dates view

Hello
I am trying to creat a view that counts number of students in courses (while # Students is a custom field that is filled manually and courses are tasks).
The view should be grouped by Quarters, Months, and weeks (Calculated custom Text fields)
The weeks groups are displayed by the start day of each week.
For example:
The view counts how many students are in courses in a specific week/month/quarter.
This is the group by definition:
Those are the fields calculations:
“WW_Start” field calculation:
(Year([Start]) & " W " & Format([Start],"WW") & " " & "   [" & Datevalue(ProjDateSub([Start],CStr(Weekday([Start])-1),"Standard")) & "]")
“MM” field calculation:
Year([Start]) & " M " & Format([Start],"MM")
Basically it works but it doesn't cover a situation where a course is more then a week.
Lets say that the duration of the task is 12 days, the task should appear on 3 different weeks groups.
But what i did puts the tasks only in the group that shows the first week of the task.
How can i change my calculations or my view so that in the second, and third week of the task it will also show the task and it's attributes.
For example:
- "UV5 ACM" task should also be in W 45 not just W 44.
Anyone has an idea how to do that?
Ofir Marco , MCTS P.Z. Projects

Hi
First, thanks for the comment "nice neat groups" :)
I think you understood correctly what is my issue.
Second, about your question: the class have the same number of students during the course period.
It will have 10 students even if the duration is 1 day or 10 days.
if you look at the basic gantt chart you will see a row like this:
Task name        Duration        Num_Students     Resource names (Instructors)
Course YYY       10d                10
Instructor X
it is an attribute on the task, not the assiment.
When i group by dates (Weeks, months, quarters) or by another field (can be course type for example) i the students are summed in the task summary level for all tasks.
Lets say i group by all the tasks (Classes) that are in the 1st quarter, and lets say for the example that there are 3:
Task 1 --> 5 students
Task 2 --> 10 students
Task 3 --> 7 students
Then, the group by summary should count:
Quarter 1 - 2014:   22 (students)
Task 1 --> 5
Task 2 --> 10
Task 3 --> 7
By the way, it doesn't matter if the version is project 2007,2010, 2013, the logic is the same.
Hope it helps and i'll be glad to have some ideas or evan get examples for solution in a project file by e-mail.
Ofir Marco , MCTS P.Z. Projects

Create a defaut view for the MS Project Server 2010 client

Dear Forum,
how can I create a defaut view for the MS Project Server 2010 client?
I saved a template and set a default view under File -> Options ->Project View. I also did the same in the checked-out enterprise global. If I then close the client and re-open it my default view changes back again to the previous one (not the view
I set as a default view).
What explains this behaviour and what can I do? Any hints?
Thank you very much for your help!

Scheduler007 --
The view you selected by clicking File > Options > Project View is the default view for every new project you create from a blank project template. This is a global option, so setting it from the checked out Enterprise Global file serves no purpose.
When you select a view as your default view, you will see that view applied to the blank project that is opened when you launch Microsoft Project 2010, and you will see it applied if you create new blank projects. If you create enterprise templates for
people to use in your organization, you should simply apply the view to the template that you want as the default so that users will see this view immediately when they create a new project from the template. In addition, if you apply a view to an open
project, close and check in the project, and then reopen the project, you will see the last view applied in that project (as Guillaume correctly points out).
Beyond this, there is no method possible for the Project Server administrator to specify a default view for the Microsoft Project application used by the project managers in your organization. This is an option each PM must set. Hope this helps.
Dale A. Howard [MVP]

How do you change the view for the timeline in a movie

not sure in new version how to do it

Not sure what you mean by the "view" for the timeline.
You can choose View>Wrapping Timeline to wrap the timeline.
Double cliccking a clip in the timeline will open the Clip Trimmer for precise work.
Matt

Microsoft Project 2007 reader/editor for Mac?

Does anyone know of a Mac application that can read and edit Microsoft Project 2007 files?

http://www.projectwizards.net/en/merlin/
Beginning with MS Project 98 and up through MS Project 2007, Merlin understands the file formats offered for this Windows program...
They offer a trail version, so you can test it.

What r the trns code for maintenance view, help view and projection view

hi all
what r the transaction code for maintenance view, help view and projection view
can anyone tell me how to create maitenance, help and projection view.
with an example
regs
hari

What is the Different Types and Usage of Views
The followings are different types of views:
- Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
- Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
- Projection View (SE11)
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
- Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
reward points if it is usefull...
Girish

I need a software for timeline tracking for a project such as a Gantt chart that is MS and Mac compatible. Any suggestions are appreciated.

I am looking for a software product for Project management to create a timeline or Gantt chart. Any suggestions are appreciated.

http://lmgtfy.com/?q=mac+project+management+software

Can't open Project 2010 file in Project 2007

I am trying to open a Project 2010 file in Project 2007, I get an error that asks if I would like to download the converter and I say yes and get a generic product page for Project 2010. I can't locate the file that I need, how do I find it?

Addressed here:
http://office.microsoft.com/en-us/project-help/opening-project-mpp-files-from-different-versions-HA001045020.aspx
You have reached this page because the Project MPP file that you are trying to open was created in a later version of Microsoft Project. Check below to determine if a converter for opening later files is available to you.
Which Project version are you using?
Which file version are you trying to open?
Notes
Project 2007
Project 2010
No converter is available. If you received a Project 2010 file that you want to open using Project 2007, ask the person who sent the file to first save it to the Project 2007 file format.
Alternately, you can install the free
trial version of Project 2010, and then view the file, or save it to the Project 2007 file.
Note Once the trial version of Project 2010 has expired, it can continue to open and view project files, but it won’t be able to save them.
Project 2003
Project 2007
There are two possibilities here.
If you are using Project 2003 with SP3, project files from Project 2007 can be opened read-only.
Download Microsoft Office Project 2003 Service Pack 3.
If you are using Project 2003 without SP3, there is no converter available. Upgrade to Project 2003 with SP3, or ask the person who sent the Project 2007 or later file to save the file first in the Project 2000-2003 file format.
Project 2003
Project 2010
No converter is available. Ask the person who sent the Project 2010 file to save the file first in the Project 2000-2003 file format.
Project 2000 or Project 2002
Project 2007 or Project 2010
No converter is available. Ask the person who sent the Project 2007 or later file to save the file first in the Project 2000-2003 file format.
Project 98
Project 2000 and later versions
No converter is available. Consider upgrading to the latest version of Project, or install the free
trial version of Project 2010 to try out Project’s enhanced functionality.
Alternately, ask the person who sent the Project 2000-2003 file to save the file first in the Project 98 file format.
Note Project 2007 and later versions of Project do not have the ability to save to the Project 98 file format.”

How to: Select a Specific Timeline Displayed in Project Online when having multiple timelines within the Enterprise Project

Currently I have an Enterprise Project which has 6 custom timelines and I want to know how to select a specific timeline to be displayed on the Project specific SharePoint site.
I'll provide some background for you so you understand my issues... I have created a "template" project with 6 custom timelines. From that project I created multiple new projects - which they all have the 6 custom timelines. These projects are
all stored in the Project Center. The problem I am having is I don't understand how to select a specific timeline to show on the project specific SharePoint site. They all seem to be displaying 1 of the 6 timelines (in no particular order). I was thinking
maybe if I had edited a project and saved it while it was displaying a specific timeline it would display the last selected timeline on the SharePoint site, but it doesn't seem to be doing that.
Is there a way to select a specific timeline to display on the SharePoint site? Also, is there a way for a user to cycle through the numerous timeline view on the project specific SharePoint site?
I await your help!! :)

Michelle_Sm --
I ran into this problem at the company where I used to work. One of our PMs had created multiple Timeline views, and wanted a specific custom Timeline view to show up in the Project Site for that project. I could not see any way to make that
happen. We had one of our SharePoint developers look into the issue, and he could not see any way to make this happen either. So, I am thinking this is not possible to do. But I would gladly welcome others in this forum to tell us the trick,
if there is one! :) Hope this helps.
Dale A. Howard [MVP]

Is there a way in fcpx to keep timeline clean for just one scene at a time ?

It would be so wonderful if I could just see the scene I'm working on in the timeline rather than the whole project....
I tried to make a compound clip of all the material related to one scene and double clicked it ....it opened in a single timeline but I felt it behaves a little differently than the parent timeline when it comes to making tracks.....
To be impractically point blank....is there a way of making the project timeline empty when Im treating one particular scene such that I don't see anything else .....and can bring back everything when I want ?

You can't really make the clips "disappear" completely, but you can go a long way to making the workspace more pliable.
Open the Timeline index (2nd icon, bottom left of FCPX) and click the Roles tab. To the right of each role is a small icon.
["normal" timeline view... thumbnails, audio waveforms, etc..]
Clicking on those icons will "minimize" the onscreen information (turn off the thumbnails and audio waves, etc) creating "blank" placeholders.
[Video and Dialogue "minimized"]
You can go one step further and select the clips you want to turn off and type V to toggle their "visibility" (this will eliminate anything from those clips from showing up in the canvas -- it will just be "black" and silent until toggled back on — *and* it will dim the clips further [see next image]).
You can then Assign a custom Role (go to Modify > Edit Roles) and create new custom Video role (and possibly audio too, if you need to isolate waveforms and have them show in your workspace). For the clips you want to work with immediately, select them all and Assign Roles > whatever name you used. In the illustration below, I used "Under Construction". (You can also toggle the canvas visibility of the clips off by *unchecking* the role in the Roles inspector.)
At the right side of the image, you'll see a normal looking clip amongst the "blanked out" clips on the storyline — it was assigned the role "Under Contruction" and its setting overrides the default Video settings. This technique should help you adequately isolate your "working scenes". When you've done, you can either create another role ("finished") or revert the roles back to the plain Video and/or Audio (Dialogue) default roles. (Remember to select and type V again to turn their visibilities back on.)
HTH

Error opening Project 2007 file after using project 2010

This is the second time I'm experiencing this problem.
Created a file (say Rev 1) in Project 2007 at work and took it home and updated it using Project 2010. When I finished updating using Project 2010, I saved the file in Project 2007 format. Came to work the next day, opened the file using
Project 2007 and did a "Save As" so that I have another revision of the file (Rev 2).
After updating Rev 2 in Project 2007 I closed it but when I came to work the next day I couldn't open Rev 2 file again either in Project 2007 or 2010. This has happened to me with 2 different files.
The error message I get is
An unexpected error occured during command execution.
Try the following:
Verify that all argumen names and values are correct and are of the correct type.
You may have run out of memory. To free up available memory, close programs, projects, or windows that you aren't using.

It seems to me that it has to do something with invalid characters in the file name of the timeline. Or it could be anything from an '&' to two concurrent spaces, mulitple '.' or even a dash (-). Stick with single spaces, letter and
number combinations and you should be fine. The problems arise based on how the file has been opened. Here’s one thread like yours. It could be useful for your, read http://www.filerepairforum.com/forum/microsoft/microsoft-aa/project/625-project-error-“an-import-error-occurred”

Audio tracks missing in the timeline viewer

Hello,
I am using Imovie 4.0.1 and have been working on a project for several months and now towards the homestretch, I have lost the ability to see the audio tracks that I added to the project. I am referring to the 2nd and 3rd tracks on the timeline viewer. This isn't a killer as I have completed all of my editing and am ready to export it to my camera (to then reimport, seperate audio, and then lock--to make sure audio and video matches up) The problem is that when I export to the camera, the audio comes and goes, and some of the video stutters at times. It seems that this all might be related. Has my imovie become corrupted? All of the projects that I have worked on in the past--that are still on this computer--exhibit the same thing i.e. I can't see the audio tracks and the editing arrows (and other items) have disappeared from underneath the viewing area.
I would appreciate any help.
jg

com.apple.imovie3.plist is what you should have found because you are using imovie 4.
And, a new .plist should have been made by imovie when you re-launched it-so that's OK.
Sounds like you have enough HD space...are you sure you are using the Timeline viewer and not the Clip viewer?
The Clip viewer looks like this:
And the Timeline viewer looks like this:
(But these are screen shots from imovie 5 so don't let that confuse you).
Sue

Zoom operation crashed Acrobat with Project 2007 content

I have some PDF created with Project 2007 contents on them. These file can be view normally. However, as soon as I zoomed in the MS Project content within the PDF, Acrobat crashed, regardless when it was standalone or within a browser. Can someone advice what the problem might be?
Thanks
uminds

Acrobat is capable of most of what you are asking for. The user can click on a part to select it, then, by right-clicking on the selected part they can select "Zoom to part" from the context menu. I am unsure how to author a 3D model so that the individual part information shows up in the Data panel of the sxtructure tree, but I have seen many files that do exactly that. I believe that this has to be done in the authoring application. As for the detailed 3D model of the individual part, Acrobat 3D gives you the ability to authro different views, which can contain individual parts. The best way to do this is to make the view of the individual part a Comment View. This type of view maintains all of the specific issues of the view.
I think that all of the attributes you've asked for are supported by Acrobat 3D in one way or another.

Timeline View for Project 2007

Similar Messages

Maybe you are looking for