(timelinecontrol with mousemove) How to make it animate back to x position on mouse over

Hello fellow creationists. LOL i mean in the artistic sense
I created parallax banner by following this quick simple tutorial located here: Creating a Parallax Effect in Edge Animate - YouTube
I noticed that it was creating an unattractive snap to x pos when you exited or entered the banner
So in mouseout i created a simple solution by adding: sym.play('posX'); which just means it plays to the end from the last x mouse position.
My problem now is when you enter the banner again it creates a snapping effect, So if its at 10 (the end) and the mouse goes onto the left side of the banner the animation will "snap" to the beginning position.
Anybody know how I can ease this? Like make it ease into that spot first and stop the snap effect? it ruins the parallax but edge animate is my only solution because of my limited knowledge in JS
Would appreciate any help! Refer to short tutorial i linked to, to understand what im talking about. Let me know if u want my current files to help.

Just had a quick look and came across this, don't know if it will help you though parralax banner with smooth mouse move
Hope you find your answers!

Similar Messages

Cooking with iPad how to make screen stay on longer

Cooking with iPad how to make screen stay on longer

Try, settings - General - Auto Lock. Set to your preferred time.
Stedman

HT1604 i erased my hfs+ with ubuntu, how can I format it back to hfs+ please help

i erased my hfs+ with ubuntu, how can I format it back to hfs+ because ubuntu rejects the cd or usb formatted to mac os extended journaled and i am in a stalemate position. What can i do?

You're running Ubuntu, and that operating system generally doesn't utilize HFS+.
That you're then asking this question implies you were intending to not do that, or that you were intending to run multiple operating systems within one GPT-partitioned disk.
I'm going to guess you wanted multiple operating systems.
If you had intended to partition your disk and to use various file systems within the partitioning, then the command(s) that were used to partition or repartition your disk were not what was probably intended. (And this presumes that the two systems share compatible boot paths; that's possible with a system that can coexist within Apple's Boot Camp or Ubuntu or another operating system booted as a guest within one of the add-on OS X virtual machine products. I don't know for certain that Ubuntu can coexist.)
To get OS X back onto this same volume, you'll need to figure out if you have a GPT and then what's in your GPT, and whether there's a partition large enough for OS X to exist, or whether you can repartition your GPT disk to allow OS X to be reinstalled or reloaded into the partition. Or you'll need to wipe the whole disk, and replace its contents with a freshly-partitioned disk, and then load a copy of OS X that's been recovered from backup or freshly installed from distribution. Or you'll need to provide another disk, and then partition and load an operating system (either Ubuntu or OS X) onto that as appropriate.
The tools for doing the repartitioning within Ubuntu are best discussed with folks more familiar with that operating system; I'm not sufficiently conversant to suggest tools for that. I'd suggest a forum specific to Ubuntu for that. The tools used to repartition the disks on OS X generally involve the Disk Utility tool, whether booted from DVD (Snow Leopard), from the USB key disk (Lion), from an external OS X disk, or potentially using Target Disk Mode from another OS X system. And the OS X tools for repartitioning are destructive; they generally don't save what's in the existing partitions, if you need to make an existing partition smaller.
The usual sequence (and the one that's easiest to describe) to establish the environment starts by wiping the whole disk, and establishing GPT partitions of the appropirate sizes using Disk Utility or its Ubuntu GPT-aware analog, and then loading the target operating systems into each. Alternatively, you can read the Boot Campe documentation, or review the documentation with the particular virtual machine product that you're going to choose and use on OS X for details of how to manage its guest operating systems.
Without some idea of your end-goal here (and where you're stuck in the current environment), it's hard to provide more specific suggestions.

How to Make Parallax Scrolling Linger Longer in Position?

Hi,
I have downloaded the sample paralax file from this tutorial (http://tv.adobe.com/watch/muse-feature-tour/adobe-muse-parallax-scrolling-may-2013/), and I'd like to ask how to make the formed words, once in position, to linger for a certain time of scroll in their position, and only then move away.
Thanks for your help, and please ask if further clerification is needed.

Currently Muse doesn't support what you are requesting.
At the moment Muse allows you to set one key position and define actions before that key position and after that key position.
What you're requesting is :
01. before key position - do action (move)
02. for duration of scroll - do action (don't move)
03. after key position - do action (move)
If you would like to see this enhancement. Please request it in the Ideas section.

How do you display a swf video / videos when you mouse over

How do you display a swf video / videos when you mouse over, It'll be something like a pop up but just that it doesn't open in another windows but within the same window and will be like a pop up roll over image.

Thank you for the reply.
I've been putzing around with it and came across the 'SetEventHandler' object and thought I'd try and make that one work.
Here's what I've got so far.
       <mx:SetEventHandler target="{turnAroundMovie}" name="handleMovieClip" handler="stopMovie()"/>
And then my fuction.
   <mx:Script>
        <![CDATA[
            private function stopMovie():void{
                turnAroundMovie.stop(); 
        ]]>
    </mx:Script>
My first instinct was the simple stop(), but that didn't fly. I even added a stopMovie frame in my .swf and tried a gotoAndStop('stopMovie'); but that didn't fly either. And that's kind of where I'm stuck at.

HT1751 I need to uninstall and reinstall iTunes (it won't let me update). So, how do I copy or back up my iTunes library of over 1,500 songs? Can I use a Flash Drive to do so?

I need to uninstall and reinstall iTunes (it won't let me update). I have IE 8 on Windows XP, and iTunes 10 something. In my Program files list I see iTunes and iTunes (2) and even iPod and iPod (2) where a tech had to back up and do this for me before. I'm just trying to fix it all. I keep getting the "The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes.msi' in the box below." I can even run a search and find the folder, but it gives me the same error message. I was planning on using the Microsoft Fix-It tool to help uninstall then Reinstall iTunes. But I need to backup my library. So, how do I copy or back up my iTunes library of over 1,500 songs? Can I copy the folder to desktop or can I use a Flash Drive to backup my music? I don't want to do anything until I know for sure how I can backup my songs, and then reinstall them into iTunes. Thanks for any help.

Ok, thanks that helps. I don't have an external hard drive though. What about backing up through 'the cloud'? I'm just wondering since my husband syncs his iPod to the PC through iTunes and he's worried that he will lose all the songs on his iPod if the library is lost from iTunes and he tries to 'sync' it up again. I'm not exactly sure how to 'copy the entire iTunes folder' either. I kinda suck at this unless I have step by step instructions, which I haven't found yet on iTunes help or other sources.
The only way I know how to back anything up is by going back to a restore point, etc. (as stated before, we don't have an external hard drive.)
Thanks for the info.

DVR with fms3 , how to make it work?

Hi
I am trying to look for documentation on how the DVR functionality is working in fms3. It seems that I need to implement som server-side scripting to make DVR even work. In Flash Live Encoder there is an option to Record DVR, but it when I press the button, all I get is:
Thu Apr 30 2009 13:15:38 : Start DVR command received
Thu Apr 30 2009 13:15:38 : Requested DVR command has been successfully issued to Primary FMS server for stream ob1stream
Thu Apr 30 2009 13:15:38 : Primary - Network Status: NetConnection.Call.Failed error Method not found (DVRSetStreamInfo).
Does anyone know how to make this work?
Best Regards Niclas

ok i'm back for a second......so uhhh....class is in session here is a basic example of a video encoder
use this to stream your video while recording.....what makes it record?and not live? this line here:
ns.publish("thefilename", "record");
the second parameter.....to make it stream live without recording it to file you change it to "live"....the first parameter is what you name your file...
after this you use your client player to connect to the same connection as outlined.....and to play the same file ..ie   stream.play("thefilename");
package
    import flash.display.*;
    import flash.media.*;
    import flash.net.*;
    import flash.events.*;
    public class SimpleEncoder extends Sprite
        var nc:NetConnection;
        var ns:NetStream;
        var mic:Microphone;
        var video:Video = new Video();
        var camera:Camera;
        public function SimpleEncoder():void
            NetConnection.defaultObjectEncoding = 0;
            nc = new NetConnection;
            nc.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
            nc.connect("rtmp://localhost/video/myvids");
        private function publishLiveStream():void
            ns = new NetStream(nc);
            ns.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
            ns.client = this;
            camera = Camera.getCamera();
            mic = Microphone.getMicrophone();
            if (camera != null){
                camera.addEventListener(ActivityEvent.ACTIVITY, activityHandler);
                video = new Video();
                video.attachCamera(camera);
                ns.attachCamera(camera);
            if (mic != null) {
                mic.addEventListener(ActivityEvent.ACTIVITY, activityHandler);
                ns.attachAudio(mic);
            if (camera != null || mic != null)
            // start publishing
            // triggers NetStream.Publish.Start
            // "thefilename" is the name of the file you use after you connect to stream in client player   stream.play("thefilename");
            ns.publish("thefilename", "record");
            else
                trace("Please check your camera and microphone");
            addChild(video);
        public function onBWDone():void
        private function netStatusHandler(event:NetStatusEvent):void
            trace(event.info.code);
            switch (event.info.code)
                case "NetStream.Buffer.Full":
                    break;
                case "NetStream.Buffer.Empty":
                    break;
                case "NetConnection.Connect.Success":
                    trace("Congratulations! you're connected");
                    publishLiveStream();
                    break;
                case "NetConnection.Connect.Failed":
                case "NetConnection.Connect.Rejected":
                   // trace ("Oops! the connection was rejected");
                    break;
                case "NetStream.Play.Stop":
                    break;
                case "NetStream.Play.StreamNotFound":
                    trace("The server could not find the stream you specified");
                    break;
                case "NetStream.Publish.BadName":
                    break;
                case "NetStream.Publish.Start":
        private function statusHandler(event:StatusEvent):void {
            trace("statusHandler: " + event);
            trace(mic.activityLevel);
        private function activityHandler(event:ActivityEvent):void
            //trace(mic.activityLevel);
        public function onFault(e:Object)
            //trace(e.info);
            //nc.close();
    }//end class
}//end package
thelegendaryghost

How to make a JDialog scrolling from one position to the other.

Hi all,
I want to move a JDialog from one position to the other(actually I want to scrolling/moving as messenger notification appear on top of the system tray) on the desktop.
Anyone of you can give me a clue.
Thanks

Ok here what I have try up to now. First make the initial position of the JFrame as follows.
    private void SetWindowLocation()
        final int screenHeight = Toolkit.getDefaultToolkit().getScreenSize().height;
        final int screenWidth = Toolkit.getDefaultToolkit().getScreenSize().width;
        final int frameHeight = this.getHeight();
        final int frameWidth = this.getWidth();
        int _y = (screenHeight - frameHeight - 32);
        int _x = (screenWidth - frameWidth);
// Initial location
        this.setLocation(_x, _y);
}This code place my Frame in the lower-right corner on top of the system-tray.
Then as you guys says, try to work on a Timer. Now I'm stuck with the action listener. I try to move the frame to upper-right corner.
    private void SetWindowLocation()
        final int screenHeight = Toolkit.getDefaultToolkit().getScreenSize().height;
        final int screenWidth = Toolkit.getDefaultToolkit().getScreenSize().width;
        final int frameHeight = this.getHeight();
        final int frameWidth = this.getWidth();
        int _y = (screenHeight - frameHeight - 32);
        int _x = (screenWidth - frameWidth);
// Initial location
        this.setLocation(_x, _y);
        _timer = new javax.swing.Timer(100, incrementYPosition);
ActionListener incrementYPosition = new ActionListener() {
        public void actionPerformed(ActionEvent evt) {
                   while(_y > 0){
                        // do the processing here.
                        // reduce the _y value and set the new location with _x
                };I'm stuck with that how to involve with the ActionListener here. :(:( After set the initial location how to deal with the ActionListener.
Any help.

In firefox 4 RC, some addons installed suddenly disappear, but checking the profile, some of the missing addons related files are still here, how to make the addons back?

I use firefox 4 form beta 9 to RC (zh) now and there are also firefox 3.6 installed in computer. One day when I open Fx 4 RC, some (actually a lot but not all) of the adoons just disappear. When I check on about:addons page, some addons installed do not appear in the list.
The addons '''REMAINED''' including:
* addons I already used in Fx 3.6 (like webmail notifie , xmarks)
* ''addons only can use in Fx 4'' (like Open Web Apps for Firefox).
The addons '''DISAPPEARED''' including:
* addons I already used in Fx 3.6 (like yoono)
* '' addons installed when using Fx 4'' (like updatescanner, Thumbnail Zoom).
But when I check the profile(by Help > Troubleshooting Information>Open Containing Folder) , some (not sure is it all) of the missing addons related files are still here [lucky], so any one know how to make the missing addons back?
Some more details:
* This happened when i use RC for already a few days and keep on even i restart Fx and windows.
* The bookmarks, history, search engine and even themes and icon setting are still here. [ I only sync bookmarks but not history for both xmarks and firefox sync.]
* This addons are really '''disappeared''' but not disable only!
* This number of addons missed, as i remember, at least 30, should be more than that number bacause some of them are installed but in disable mode.
* I try to install back one of the addons - Stylish, the installed code are still here.
* It is nearly an impossible mission to install every missing addons again, as it really kill my time.

Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini, extensions.sqlite) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry. New files will be created when required.
See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar to do a compatibility check.

I have greyed out songs on my ipod and i dont know how to make them come back on my ipod and it wont work from my itunes library to my ipod

I need to know how to make greyed out some songs turn bold. I have tried from my itunes library to my ipod but it still wont work. Can anyone help?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

HT204053 How to make my iPad back to Philippines store? I cannot update my my apps

Pls help me to make my iPad back to Philippine store coz I cannot update my apps store....

What you can re-download will depend upon what country that you are in (music, films, tv shows can't be re-downloaded in all countries, and audiobooks and ringtones can't currently be re-downloaded anywhere), and whether they remain in the store (content providers occasionally remove their items). You should keep and maintain your own backup copies of all of your downloads, just in case they are removed from the store (and for apps only the current version of each app is available in the store, so there may come a time when the version in the store requires a higher version of iOS than you have on your iPad).

X58 Eclipse Sli with CMP12GX3M3A1600C9 how to make it run stable in 1600Hz?

Hello ,
I m new here, so forgive me if i make a mistake somewhere !
So my specs are :
motherboard: X58 Eclipse Sli(bios ver:1.F0 model:MS-7520)
CPU:i7 950 @ 3,07 (stock)
GPU: 2x GTX470(msi)
PSU:Thermaltake 1200watt
HD:1xSSD , 1xWD@10000rpm
and here is my story:
I have been using TR3X6G1600C9(corsair ver8.1) with XMP enabled so in 1600Hz and everything were going sweet stable pc , then i decided to put something more on it another TR3X6G1600C9(corsair) this time came different ver2.5 with XMP profile off seems work fine , with XMP on blue screen-restart so i asked in corsair forum they show a .pdf from corsair which was saying that mixing modules even with same kind of memory there are posibilities it wont be compatible-work.
Today i just replaced the 2xTR3X6G1600C9 with CMP12GX3M3A1600C9(corsair) enabled the XMP profile , everything was looking good all 12gb were working , but after some time i got blue screen and restart :(, so i bet this has to do with options and propably i have to do more than to enable XMP profile in order to make it stable. So any suggetions ? Yes i m totally noob from knowledge in bios only i know is to enable XMP but i m looking forward to learn stuff from ya guys and considering that i might just lost about 230e in order to upgrade ram and i can't make to work 12gb stable in 1600hz i should of ask much earlier!

Quote from: IcUfu on 19-May-11, 02:54:22
Hello ,
I m new here, so forgive me if i make a mistake somewhere !
So my specs are :
motherboard: X58 Eclipse Sli(bios ver:1.F0 model:MS-7520)
CPU:i7 950 @ 3,07 (stock)
GPU: 2x GTX470(msi)
PSU:Thermaltake 1200watt
HD:1xSSD , 1xWD@10000rpm
and here is my story:
I have been using TR3X6G1600C9(corsair ver8.1)(http://www.corsair.com/memory/xms-classic/xms3-ddr3-memory/tr3x6g1600c9.html) with XMP enabled so in 1600Hz and everything were going sweet stable pc , then i decided to put something more on it another TR3X6G1600C9(corsair) this time came different ver2.5 with XMP profile off seems work fine , with XMP on blue screen-restart so i asked in corsair forum they show a .pdf from corsair which was saying that mixing modules even with same kind of memory there are posibilities it wont be compatible-work.
Today i just replaced the 2xTR3X6G1600C9 with CMP12GX3M3A1600C9(corsair)( http://www.corsair.com/memory/dominator/dominator/cmp12gx3m3a1600c9.html) enabled the XMP profile , everything was looking good all 12gb were working , but after some time i got blue screen and restart :(, so i bet this has to do with options and propably i have to do more than to enable XMP profile in order to make it stable. So any suggetions ? Yes i m totally noob from knowledge in bios only i know is to enable XMP but i m looking forward to learn stuff from ya guys and considering that i might just lost about 230e in order to upgrade ram and i can't make to work 12gb stable in 1600hz i should of ask much earlier!
What i have done so far ,with CMP12GX3M3A1600C9 http://www.corsair.com/memory/dominator/dominator/cmp12gx3m3a1600c9.html
turned off XMP , put manually :1.DRAM freq-1600Hz 2. CAS timings 9-9-9-24 3.DRAM command rate 2N 4. DRAM Voltage 1.65 it did't crass again so far but i am afraid about this DRAM Voktage 1.65 is it posible that i will destroy my CPU this way??? The rest options in bios are setted to optimal defaults should i change something else in order to protect my CPU?

I have a application build in labview 8.5 for Windows XP using NI Visa functions to interact with hardware , how to make is work in Windows 7 32 bit and Win 7 64 bit

I have a application build in Labview 8.5 which wroks fine with Windows XP , this program uses basic read /write functions of NI Visa to communicate with Hardware . This application doesnt work with Windows 7 32 bit/64 and Vista . What changes i need to do to make it work for the said operating system

srinivas wrote:
Sorry for confusion ,
My question is what changes i need to do in code or while making the installer to make the existing program work with other Windows operating system
You need to make sure the machine have the corresponding NI-VISA installed. Check in the NI software pages for the right version.
Also make sure that the com port's can be selected when you first start the application. Eg. if you refer to VISA "COM1" on the XP machine It might be "COM2" on the Win7 machine.
Br,
/Roger

1080P mixed with 720P - how to make the workflow work best?

Dear Forum
I am starting a new documentary and before i start i want to clear something out..
I have shot most of the footage in 720P But maybe about 1/3 of the footage is in 1080P (I was requiered to do so because some of the footage was used for television)
My question is: How do i start my project workflow with mixed footage??
When choosing a 1080P sequense and scaling to resize the 720P footage, i am unable to use the warp stabiliser on the "up-Scaled" 720P footage... Thats basicly the problem..
Please Help!
Thanks in advance!
- Simon

Do a test for yourself
Not sure about that film grain idea though!
Here is your upscale....

Qosmio X770-12M with Win7 - how to make screenshot?

Hello,
I have new Qosmio X770-12M with Windows 7 - and I needed to make s screenshot but I couldn't >
May someone help me in this ?

Check http://take-a-screenshot.org/
In Win7 you can use Snipping Tool and choose exact part of the desktop or pic shown on the desktop.
If you have more questions you are welcome.

(timelinecontrol with mousemove) How to make it animate back to x position on mouse over

Similar Messages

Maybe you are looking for